-
Notifications
You must be signed in to change notification settings - Fork 7.7k
Mixer Template Dev Guide
Templates are a foundational building block of the Mixer architecture. This document describes the template format and how to extend Mixer with custom templates.
- Background
- Template format
- Supported field names
- Supported field types
- Adding a template to Mixer
- Template evolution compatibility
Mixer is an attribute processing machine. It ingests attributes coming from the proxy and responds by triggering calls into a suite of adapters. These adapters in turn communicate with infrastructure backends that offer a variety of capabilities such as logging, monitoring, quotas, ACL checking, and more. The operator that configures Istio controls what Mixer does with incoming attributes and which adapters are called as a result.
Mixer categorizes adapters based on the type of data they consume. For example, there are metric adapters, logging adapters, quota adapters, access control adapters, and more. The type of data Mixer delivers to individual adapters depends on each adapter’s category. All adapters of a given category receive the same type of data. For example, metric adapters all receive metrics at runtime.
Mixer determines the type of data that each category of adapter processes at runtime using templates. A template determines the data adapters receive, as well as the instances operators must create in order to use an adapter. The Adapter Developer's Guide explains how templates are automatically transformed into Go structs and interfaces that can be used by adapter developers, and into config definitions that can be used by operators.
Mixer includes a number of canonical templates which cover most of the anticipated workloads that Mixer is expected to be used with. However, the set of supported templates can readily be extended in order to support emerging usage scenarios. Note that it’s preferable to use existing templates when possible as it tends to deliver a better end-to-end story for the ecosystem by making configuration state more portable between adapters.
This document describes the simple rules used to create templates for Mixer. The Adapter Developer’s Guide describes how to use templates to create adapters.
Templates are expressed using the protobuf syntax. They are generally fairly simple data structures. An an example, here is the listentry
template:
syntax = "proto3";
package listEntry;
import "mixer/adapter/model/v1beta1/extensions.proto";
option (istio.mixer.adapter.model.v1beta1.template_variety) = TEMPLATE_VARIETY_CHECK;
// ListEntry is used to verify the presence/absence of a string
// within a list.
//
// When writing the configuration, the value for the fields associated with this template can either be a
// literal or an [expression](https://istio.io/docs/reference/config/mixer/expression-language.html). Please note that if the datatype of a field is not istio.mixer.adapter.model.v1beta1.Value,
// then the expression's [inferred type](https://istio.io/docs/reference/config/mixer/expression-language.html#type-checking) must match the datatype of the field.
//
// Example config:
//
// apiVersion: "config.istio.io/v1alpha2"
// kind: listentry
// metadata:
// name: appversion
// namespace: istio-system
// spec:
// value: source.labels["version"]
message Template {
// Specifies the entry to verify in the list.
string value = 1;
}
The interesting parts of this definition are:
-
Package Name. The package name determines the name by which the template will be known, both by adapter authors and operators creating instances of that template. The name should be written in camelCase such that generated Go artifacts are more readable.
-
Variety. The variety of a template determines at what point in the Mixer's processing pipeline the adapters that implement the template will be called. This can be CHECK, REPORT, QUOTA, or ATTRIBUTE_GENERATOR.
-
Message Name. The name of the template message should always be
Template
. -
Fields. The fields represent the general shape of the data that will be delivered to the adapters at runtime. The operator will need to populate these fields via configuration.
-
Comments The comment on the
Template
message is used to generate documentation that is used by both adapter developers as well as operators. Therefore, the comment should contain an example for the operator to use when writing configuration as well as a good description expressing the intent of the template.
Message OutputTemplate
is only applicable if the variety of the template is ATTRIBUTE_GENERATOR
.
While message Template
defines the type of data that gets passed to the adapter, the OutputTemplate
defines type of data
that is returned from an attribute generating adapter. Attribute generating adapters are called with the input 'Template'
instance before other adapters are invoked and are responsible for instantiating and
returning an instance
of OutputTemplate
. The operator uses these output values to create more attributes which
can then be used to create instances of other non ATTRIBUTE_GENERATOR
template variety. OutputTemplate
s are
generally fairly simple data structures. An an example, here is the kubernetes
template that outputs various
kubernetes environment specific attributes:
// OutputTemplate refers to the output from the adapter. It is used inside the attribute_binding section of the config
// to assign values to the generated attributes using the `$out.<field name of the OutputTemplate>` syntax.
message OutputTemplate {
// Refers to source pod ip address. attribute_bindings can refer to this field using $out.source_pod_ip
istio.mixer.adapter.model.v1beta1.IPAddress source_pod_ip = 1;
// Refers to source pod name. attribute_bindings can refer to this field using $out.source_pod_name
string source_pod_name = 2;
// Refers to source pod labels. attribute_bindings can refer to this field using $out.source_labels
map<string, string> source_labels = 3;
// Refers to source pod namespace. attribute_bindings can refer to this field using $out.source_namespace
string source_namespace = 4;
// Refers to source service. attribute_bindings can refer to this field using $out.source_service
string source_service = 5;
// Refers to source pod service account name. attribute_bindings can refer to this field using $out.source_service_account_name
string source_service_account_name = 6;
// Refers to source pod host ip address. attribute_bindings can refer to this field using $out.source_host_ip
istio.mixer.adapter.model.v1beta1.IPAddress source_host_ip = 7;
// Refers to destination pod ip address. attribute_bindings can refer to this field using $out.destination_pod_ip
istio.mixer.adapter.model.v1beta1.IPAddress destination_pod_ip = 8;
// Refers to destination pod name. attribute_bindings can refer to this field using $out.destination_pod_name
string destination_pod_name = 9;
// Refers to destination pod labels. attribute_bindings can refer to this field using $out.destination_labels
map<string, string> destination_labels = 10;
// Refers to destination pod namespace. attribute_bindings can refer to this field using $out.destination_namespace
string destination_namespace = 11;
// Refers to destination service. attribute_bindings can refer to this field using $out.destination_service
string destination_service = 12;
// Refers to destination pod service account name. attribute_bindings can refer to this field using $out.destination_service_account_name
string destination_service_account_name = 13;
// Refers to destination pod host ip address. attribute_bindings can refer to this field using $out.destination_host_ip
istio.mixer.adapter.model.v1beta1.IPAddress destination_host_ip = 14;
...
}
Template fields can have any valid protobuf field name, except for the reserved name name
. Field
name should follow the normal protobuf naming convention of snake_case.
Templates currently only support a subset of the full protobuf type system. Following types can be used for fields in a template. Below table also shows the corresponding Golang type delivered to the adapters:
Template field type | Golang type |
---|---|
string |
string |
int64 |
int64 |
double |
float64 |
bool |
bool |
istio.mixer.adapter.model.v1beta1.TimeStamp |
time.Time |
istio.mixer.adapter.model.v1beta1.Duration |
time.Duration |
istio.mixer.adapter.model.v1beta1.IPAddress |
net.IP |
istio.mixer.adapter.model.v1beta1.DNSName |
adapter.DNSName |
istio.mixer.adapter.model.v1beta1.Value |
interface{} |
map<string, string> |
map[string]string |
map<string, int64> |
map[string]int64 |
map<string, double> |
map[string]float64 |
map<string, bool> |
map[string]bool |
map<string, istio.mixer.adapter.model.v1beta1.TimeStamp> |
map[string]time.Time |
map<string, istio.mixer.adapter.model.v1beta1.Duration> |
map[string]time.Duration |
map<string, istio.mixer.adapter.model.v1beta1.IPAddress> |
map[string]net.IP |
map<string, istio.mixer.adapter.model.v1beta1.DNSName> |
map[string]adapter.DNSName |
map<string, istio.mixer.adapter.model.v1beta1.Value> |
map[string]interface{} |
There is currently no support for nested messages, enums, oneof
, and repeated
.
The type istio.mixer.adapter.model.v1beta1.Value
has a special meaning. Use of this type
tells Mixer that the associated value can be any of the supported attribute
types which are defined by the ValueType
enum. The specific type that will be used at runtime depends on the configuration the operator writes.
Adapters are told what these types are at configuration time so they can prepare
themselves accordingly.
Templates are statically linked into Mixer. To add or modify a template, it is therefore necessary to produce a new Mixer binary.
** TBD **
Here's what can be done to a template and remain backward compatible with existing adapters and operator configurations that use the template:
- Adding a field
The following changes cannot generally be made while maintaining compatibility:
- Renaming the template
- Changing the template's variety
- Removing a field
- Renaming a field
- Changing the type of a field
Visit istio.io to learn how to use Istio.
- Preparing for Development Mac
- Preparing for Development Linux
- Troubleshooting Development Environment
- Repository Map
- GitHub Workflow
- Github Gmail Filters
- Using the Code Base
- Developing with Minikube
- Remote Debugging
- Verify your Docker Environment
- Istio Test Framework
- Working with Prow
- Test Grid
- Code Coverage FAQ
- Writing Good Integration Tests
- Test Flakes
- Release Manager Expectations
- Preparing Istio Releases
- 1.5 Release Information
- 1.6 Release Information
- 1.7 Release Information
- 1.8 Release Information
- 1.9 Release Information
- 1.10 Release Information
- 1.11 Release Information
- 1.12 Release Information
- 1.13 Release Information
- 1.14 Release Information
- 1.15 Release Information
- 1.16 Release Information
- 1.17 Release Information
- 1.18 Release Information
- 1.19 Release Information
- 1.20 Release Information
- 1.21 Release Information
- 1.22 Release Information
- 1.23 Release Information
- 1.24 Release Information
- Collecting Logs and Debug Info
- Dependency FAQ
- Working with discuss.istio.io
- Developing with and hosting upon OpenShift
- Adapter Dev Guide
- Adapter Walkthrough
- Attribute Generating Adapter Walkthrough
- Route Directive Adapter Development Guide
- Out of Tree Adapter Walkthrough
- Running a Local Instance
- Template Dev Guide
- Using a Custom Adapter
- Publishing Adapters and Templates to istio.io
- Enabling Envoy Authorization Service and gRPC Access Log Service With Mixer