Important
go-syslog
is maintained by the original author at leodido/go-syslog
This repository is maintained only as a placeholder; it is not actively developed and may be out of date.
A parser for Syslog messages and transports.
Blazing fast Syslog parsers
By @leodido.
To wrap up, this package provides:
- an RFC5424-compliant parser and builder
- an RFC3164-compliant parser - ie., BSD-syslog messages
- a parser that works on streams for syslog with octet counting framing technique, see octetcounting
- a parser that works on streams for syslog with non-transparent framing technique, see nontransparent
This library provides the pieces to parse Syslog messages transported following various RFCs.
For example:
- TLS with octet count (RFC5425)
- TCP with non-transparent framing or with octet count (RFC 6587)
- UDP carrying one message per packet (RFC5426)
go get github.com/influxdata/go-syslog/v3
The docs directory contains .dot
files representing the finite-state machines (FSMs) implementing the syslog parsers and transports.
Suppose you want to parse a given sequence of bytes as a RFC5424 message.
Notice that the same interface applies for RFC3164. But you can always take a look at the examples file.
i := []byte(`<165>4 2018-10-11T22:14:15.003Z mymach.it e - 1 [ex@32473 iut="3"] An application event log entry...`)
p := rfc5424.NewParser()
m, e := p.Parse(i)
This results in m
being equal to:
// (*rfc5424.SyslogMessage)({
// Base: (syslog.Base) {
// Facility: (*uint8)(20),
// Severity: (*uint8)(5),
// Priority: (*uint8)(165),
// Timestamp: (*time.Time)(2018-10-11 22:14:15.003 0000 UTC),
// Hostname: (*string)((len=9) "mymach.it"),
// Appname: (*string)((len=1) "e"),
// ProcID: (*string)(<nil>),
// MsgID: (*string)((len=1) "1"),
// Message: (*string)((len=33) "An application event log entry...")
// },
// Version: (uint16) 4,
// StructuredData: (*map[string]map[string]string)((len=1) {
// (string) (len=8) "ex@32473": (map[string]string) (len=1) {
// (string) (len=3) "iut": (string) (len=1) "3"
// }
// })
// })
And e
being equal to nil
since the i
byte slice contains a perfectly valid RFC5424 message.
RFC5424 parser has the ability to perform partial matches (until it can).
With this mode enabled, when the parsing process errors out it returns the message collected until that position, and the error that caused the parser to stop.
Notice that in this modality the output is returned iff it represents a minimally valid message - ie., a message containing almost a priority field in [1,191]
within angular brackets, followed by a version in ]0,999]
(in the case of RFC5424).
Let's look at an example.
i := []byte("<1>1 A - - - - - -")
p := NewParser(WithBestEffort())
m, e := p.Parse(i)
This results in m
being equal to the following SyslogMessage
instance.
// (*rfc5424.SyslogMessage)({
// Base: (syslog.Base) {
// Facility: (*uint8)(0),
// Severity: (*uint8)(1),
// Priority: (*uint8)(1),
// Timestamp: (*time.Time)(<nil>),
// Hostname: (*string)(<nil>),
// Appname: (*string)(<nil>),
// ProcID: (*string)(<nil>),
// MsgID: (*string)(<nil>),
// Message: (*string)(<nil>)
// },
// Version: (uint16) 1,
// StructuredData: (*map[string]map[string]string)(<nil>)
// })
And, at the same time, in e
reporting the error that actually stopped the parser.
// expecting a RFC3339MICRO timestamp or a nil value [col 5]
Both m
and e
have a value since at the column the parser stopped it already was able to construct a minimally valid RFC5424 SyslogMessage
.
This library also provides a builder to construct valid syslog messages.
Notice that its API ignores input values that does not match the grammar.
Let's have a look to an example.
msg := &rfc5424.SyslogMessage{}
msg.SetTimestamp("not a RFC3339MICRO timestamp")
msg.Valid() // Not yet a valid message (try msg.Valid())
msg.SetPriority(191)
msg.SetVersion(1)
msg.Valid() // Now it is minimally valid
Printing msg
you will verify it contains a nil
timestamp (since an invalid one has been given).
// (*rfc5424.SyslogMessage)({
// Base: (syslog.Base) {
// Facility: (*uint8)(23),
// Severity: (*uint8)(7),
// Priority: (*uint8)(191),
// Timestamp: (*time.Time)(<nil>),
// Hostname: (*string)(<nil>),
// Appname: (*string)(<nil>),
// ProcID: (*string)(<nil>),
// MsgID: (*string)(<nil>),
// Message: (*string)(<nil>)
// },
// Version: (uint16) 1,
// StructuredData: (*map[string]map[string]string)(<nil>)
// })
Finally you can serialize the message into a string.
str, _ := msg.String()
// <191>1 - - - - - -
Excluding encapsulating one message for packet in packet protocols there are two ways to transfer syslog messages over streams.
The older - ie., the non-transparent framing - and the newer one - ie., the octet counting framing - which is reliable and has not been seen to cause problems noted with the non-transparent one.
This library provide stream parsers for both.
In short, RFC5425 and RFC6587, aside from the protocol considerations, describe a transparent framing technique for Syslog messages that uses the octect counting technique - ie., the message length of the incoming message.
Each Syslog message is sent with a prefix representing the number of bytes it is made of.
The octecounting package parses messages stream following such rule.
To quickly understand how to use it please have a look at the example file.
The RFC6587 also describes the non-transparent framing transport of syslog messages.
In such case the messages are separated by a trailer, usually a line feed.
The nontransparent package parses message stream following such technique.
To quickly understand how to use it please have a look at the example file.
Things we do not support:
- trailers other than
LF
orNUL
- trailers which length is greater than 1 byte
- trailer change on a frame-by-frame basis
To run the benchmark execute the following command.
make bench
On my machine1 these are the results obtained paring RFC5424 syslog messages with best effort mode on.
[no]_empty_input__________________________________ 4524100 274 ns/op 272 B/op 4 allocs/op
[no]_multiple_syslog_messages_on_multiple_lines___ 3039513 361 ns/op 288 B/op 8 allocs/op
[no]_impossible_timestamp_________________________ 1244562 951 ns/op 512 B/op 11 allocs/op
[no]_malformed_structured_data____________________ 2389249 512 ns/op 512 B/op 9 allocs/op
[no]_with_duplicated_structured_data_id___________ 1000000 1183 ns/op 712 B/op 17 allocs/op
[ok]_minimal______________________________________ 6876235 178 ns/op 227 B/op 5 allocs/op
[ok]_average_message______________________________ 730473 1653 ns/op 1520 B/op 24 allocs/op
[ok]_complicated_message__________________________ 908776 1344 ns/op 1264 B/op 24 allocs/op
[ok]_very_long_message____________________________ 392737 3114 ns/op 2448 B/op 25 allocs/op
[ok]_all_max_length_and_complete__________________ 510740 2431 ns/op 1872 B/op 28 allocs/op
[ok]_all_max_length_except_structured_data_and_mes 755124 1593 ns/op 867 B/op 13 allocs/op
[ok]_minimal_with_message_containing_newline______ 6142984 199 ns/op 230 B/op 6 allocs/op
[ok]_w/o_procid,_w/o_structured_data,_with_message 1670286 732 ns/op 348 B/op 10 allocs/op
[ok]_minimal_with_UTF-8_message___________________ 3013480 407 ns/op 339 B/op 6 allocs/op
[ok]_minimal_with_UTF-8_message_starting_with_BOM_ 2926410 423 ns/op 355 B/op 6 allocs/op
[ok]_with_structured_data_id,_w/o_structured_data_ 1558971 814 ns/op 570 B/op 11 allocs/op
[ok]_with_multiple_structured_data________________ 1000000 1243 ns/op 1205 B/op 16 allocs/op
[ok]_with_escaped_backslash_within_structured_data 1000000 1025 ns/op 896 B/op 17 allocs/op
[ok]_with_UTF-8_structured_data_param_value,_with_ 1000000 1241 ns/op 1034 B/op 19 allocs/op
As you can see it takes:
-
~250ns to parse the smallest legal message
-
less than 2µs to parse an average legal message
-
~3µs to parse a very long legal message
Other RFC5424 implementations, like this one in Rust, spend 8µs to parse an average legal message.
TBD: comparison against other Go parsers.
- [1]: Intel Core i7-8850H CPU @ 2.60GHz