- New documentation: https://luatelemetry.readthedocs.io/en/latest/
- Supported receivers: FrSky (compatible) telemetry receivers (X, R9 and D series) and Crossfire receivers.
- Supported transmitters: FrSky Taranis and Horus transmitters, Jumper T12, T16, FLYSKY Nirvana NV14, Radiomaster TX16S, TX12, Zorro, Boxer (at least).
- Note other transmitters may work, but are not considered "supported".
- Launch/pilot-based model orientation and location indicators (great for lost orientation/losing sight of your model)
- Compass-based direction indicator (with magnetometer sensor on multirotor or fixed-wing with GPS)
- Pilot (glass cockpit) view which includes attitude indicator as well as pilot-familiar layout of additional data
- Radar (map) view shows model in relationship to home position, can be displayed either as launch/pilot-based or compass-based orientation
- Altitude graph view shows altitude for the last 1-6 minutes
- Colour LCD transmitters show all views at the same time, and include additional features like roll scale
- Bar gauges for Fuel (% battery mAh capacity remaining), Battery voltage, RSSI strength, Transmitter battery, GPS accuracy (HDOP), Variometer (and Altitude for X9D, X9D and X9E transmitters)
- Display and voice alerts for flight modes and flight mode modifiers (altitude hold, heading hold, home reset, etc.)
- Voice notifications for % battery remaining (based on current), voltage low/critical, high altitude, lost GPS, ready to arm, armed, disarmed, etc.
- GPS info: Satellites locked, GPS accuracy (HDOP), GPS altitude, GPS coordinates. Also logs the last GPS location (reviewed from the config menu)
- Display of current/maximum: Altitude, Distance, Speed and Current
- Display of current/minimum: Battery voltage, RSSI strength
- Title display of model name, flight timer, transmitter voltage and receiver voltage
- Menu configuration options can be changed from inside the script and can be unique to each model
- Speed and distance values are displayed in metric or imperial based on transmitter's telemetry settings
- Voice files, modes and config menu in English, German, French or Spanish.
- OpenTX: Playback previous flights via telemetry log files, including fast forward, rewind, and pause features
- May work with other (non-INAV) firmware; this is not a supported use case.
Supported environments are given below, older versions may also work but are unsupported.
- INAV v6.0 running on your flight controller.
- OpenTX v2.3.14 running on Taranis Q X7/Q X7S, X9D/X9D , X9E, X9 Lite, X-Lite/X-Lite Pro, Horus X10/X10S or X12S
- EdgeTX v2.8.0 running on a supported radio.
- FrSky X, R9 or D series telemetry receiver: X4RSB, X8R, XSR, R-XSR, XSR-M, XSR-E, RX4R, RX6R, R9, R9 Slim, R9 Slim , R9 Mini, R9 MM, D8R-II plus, D8R-XP, D4R-II, etc. or any Crossfire receiver: Micro, Nano, Diversity, ELRS etc.
- GPS - On the aircraft.
- Altimeter/barometer (GPS altitude used if barometer not present)
- Magnetometer/compass for multi-rotor (fixed-wing craft use GPS for directional info)
- Current/amperage (for fuel gauge)
- Crossfire is not fully supported with OpenTX, due to a long-standing OpenTX issue; EdgeTX is recommended for use with Crossfire (and generally).
- Some telemetry is missing from Crossfire: HDOP, GPS altitude and some secondary flight mode notifications like heading hold
- Other Lua scripts may not run at the same time as INAV Lua Telemetry due to limited transmitter resources)
- RadioMaster - Sponsoring RadioMaster Boxer support as well as general small screen radio and ELRS maintenance.
- Team Black Sheep - Sponsoring TBS Crossfire telemetry support
- FrSky - Sponsoring FrSky Horus transmitter support
- Jumper - Sponsoring Jumper T16 transmitter support
- FLYSKY - Sponsoring FLYSKY Nirvana NV14 transmitter support
- Lua Telemetry Docs
- Download latest release
- Installation Instructions
- Upgrade Instructions
- Download Options
- Tips & Common Problems
- Support Issues
Support Chat (Telegram): Contact current maintainer @nvrm17 on telegram for any questions
Thanks goes to these wonderful people (emoji key):
