Release 0.8 is built for macOS 12 "Monterey" and up. It uses code-signed, universal binaries that run on Intel and Apple Silicon processors. It is not notarized by Apple and therefore requires special treatment during installation in order to work around quarantine.
EnvPane is a preference pane for macOS that lets you set environment variables
for all applications, both GUI and terminal. Not only does it restore support
for ~/.MacOSX/environment.plist
(seeBackground), it also
publishes your changes to the environment immediately, without the need to log
out and back in. This works for changes made by manually editing
~/.MacOSX/environment.plist
as well via the preference pane UI.
EnvPane 0.8 was tested under macOS 12 "Monterey" on Apple Silicon and Intel.
EnvPane 0.6 was tested under OS X 10.09 "Mavericks", OS X 10.11 "El Capitan" and macOS Sierra (10.12). It should also work on 10.10 "Yosemite". Apple reimplemented launchd in 10.10 and in the course of doing so deprecated the APIs used by EnvPane and even broke some of them. EnvPane v0.6 adds support for the new but undocumented APIs, addressing the deprecation and broken APIs.
EnvPane does not work for setting the PATH environment variable. See the FAQ on that topic.
EnvPane cannot be used to set DYLD_…
variables. This is restriction imposed
by macOS, I assume for security reasons.
While EnvPane is code-signed, it is not yet notarized by Apple. Lack of notarization means that it will be quarantined when downloaded by a web browser. macOS refuses to run quarantined binaries, displaying a mildly misleading error message. A user reports that, on Ventura, right-clicking the preference pane in Finder and selecting Open overrides that restriction. I was not able to confirm that workaround for Monterey (I haven't upgraded to Ventura yet). For details, refer to #34.
The code-signed binary of EnvPane can bedownloaded from GitHub. Be sure to read the [installation instructions].
Alternatively you might want to grab the source and build it yourself.
Mac OS X releases prior to Mountain Lion (10.8) included support for
~/.MacOSX/environment.plist
, a file that contained session-global, per-user
environment variables. Starting with Mountain Lion, support of this
well-documented and popular mechanism was dropped without an official
announcement or explanation by Apple. It may have been in [response]
flashback to the Flashback trojan which used that file to inject itself into
every process, but this is a wild guess, especially considering that there is a
relatively easy workaround, as demonstrated by the existence of this very
utility.
EnvPane includes (and automatically installs) a launchd
agent that runs 1)
early after login and 2) whenever the ~/.MacOSX/environment.plist
changes.
The agent reads ~/.MacOSX/environment.plist
and exports the environment
variables from that file to the current user's launchd
instance via the same
API that is used by launchctl setenv
and launchctl unsetenv
.
TODO: Mention /etc/launchd.conf
and ~/.launchd.conf
macOS 12 "Monterey" or higher.
For release 0.6, Mac OS X 10.9 "Mavericks" or higher.'
Run this command in Terminal to download and install EnvPane in a single step.
(cd ~/Library/PreferencePanes && rm -rf EnvPane.prefPane && curl -sL https://github.com/hschmidt/EnvPane/releases/download/releases/0.8/EnvPane-0.8.tar.bz2 | tar -xjf -)
- Download EnvPane-0.8.dmg
- Run
xattr -dr com.apple.quarantine ~/Downloads/EnvPane-0.8.dmg
in Terminal - Double-click the downloaded
EnvPane-0.8.dmg
. A Finder window opens - Double-click the
EnvPane.pref-pane
file - Choose Install for this user only
Do not use the Install for all users option. See the FAQ.
When you open the Environment Variables preference pane, you will see a
simple two-column table that lists the environment variables from your
~/.MacOSX/environment.plist
. If that file doesn't exist, the table will be
empty but the file will be created as soon as you add an entry to the
table. To add an environment variable click the
button. Specify the name of
the new variable, hit tab
and specify its value. Hit enter
. To modify a
variable, click its name or value, make the desired changes and hit enter
. To
delete an environment variable, click a row in the table and click the -
button.
Changes are effective immediately (after a delay of a few seconds) in all subsequently launched applications. There is no need to reboot or log out. However, running applications will [not be affected] (#why-arent-running-applications-affected). You need to quit and relaunch the application, in order for your changes to take effect.
The $
character in a value has special meaning. It induces the interpolation
of other environment variables or the output of shell commands. If the $
character is followed by the name of another variable, e.g. $FOO
the value of
that variable will be inserted in place. The referenced variable can be one
explicitly defined in the preference pane or it can be one from the default
environment that launchd sets up. The variable name following $
must contain
only letters, digits or underscore and may not start with a digit. To
interpolate a variable whose name does not meet those requirements, place the
variable name between curly braces, e.g. ${F-O-O}
. You can also interpolate
the name of an interpolated variable: assuming the variable EFF
is set to the
value F
, ${${EFF}OO}
would reference the variabe FOO. Don't worry if this
looks confusing, this is an esoteric feature.
To interpolate the output of a shell command, enclose it in parentheses.
$(date)
, for example, is replaced with the current date, because that's what
the date
program prints to standard output. The command is subject to shell
expansion –because it is invoked via /bin/sh -c
– but also to immediate variable
interpolation by EnvPane as described above. In other words, $(BAR=bar ; echo $BAR)
will not evaluate to bar
because the $BAR
reference will be
interpolated by EnvPane, at a time when BAR is not yet defined. To prevent
EnvPane from evaluating the reference, you must escape the dollar sign:
$(BAR=bar; echo $$BAR)
.
Again, whenever you need a literal dollar sign in a variable value, you need do
write two dollar signs: $$
. If you need a closing parentheses inside a
command interpolation, or a closing curly brace inside a variable
interpolation, you need to write $()
or ${}
respectively. I now realize
that $)
and $}
would have been a better choice but it is what it is.
-
Open System Preferences
-
Right click Environment Variables
-
Select Remove Environment Variables Preference Pane
The uninstallation should be clean. I went to great lengths in ensuring that
removing the preference pane doesn't leave orphaned files on the system. The
~/.MacOSX/environment.plist
will not be removed.
- Work around quarantine
-
Code-signed with my Apple Developer ID
-
Universal binary (Apple Silicon and Intel)
-
Works in dark mode
-
Dealt with a few deprecations
-
Fixed a font color issue in dark mode
-
Support for interpolation of other variables and shell command output
-
Support for macOS Sierra
-
Minor UI changes and a few bug fixes
-
Fix: Projects doesn't build with XCode 7 on OS X El Capitan (10.11)
-
Fix: envlib_unsetenv() is invoked unnecessarily with empty string if environment is empty (issue #3)
Ignore. They are releases made from a fork of this repository, not by the original author and inauspiciously using the EnvPane name.
Fix: Preference pane fails to load if ~/Library/LaunchAgents
is missing
(issue #2)
Fix: Preference pane fails to load if ~/.MacOSX
or ~/.MacOSX/environment.plist
are missing (issue #1).
Improved documentation.
Initial release.
-
Mac OS X 10.8, Mountain Lion
-
Xcode 4.5.x (I use 4.5.2)
-
A copy of Apple's
launchd
source tree, available on [Apple Open Source] apple_open_source under the Apache License 2.0. The current version of EnvPane was compiled against launchd-442.26.2 -
David Parsons' Discount C library by for processing John Gruber's Markdown. Install the library as described on the project page. Using the default installation prefix of
/usr/local
is recommended. The current version of EnvPane was statically linked against version 2.2.1 of that library. HomeBrew users can usebrew install discount
to install it.
-
Clone the EnvPane repository on Github
-
Open the Xcode project
-
At the project level, adjust the
launchd_source_dir
custom build setting to point to the copy of the launchd source tree -
Build the project
Linker complaints about libmarkdown. e.g.
ld: warning: object file (/usr/local/lib/libmarkdown.a(markdown.o)) was built for newer OSX version (10.11) than being linked (10.9)
are to be expected when linking against a HomeBrew-ed installation of that library on 10.10 or newer.
The -load_all
linker flag is needed to prevent errors like
exception:-[__NSCFDictionary writeToFile:atomically:createParent:createAncestors:error:]: unrecognized selector sent to instance
There are two reasons. The first one is a technicality: the environment
variables configured via the preference pane are actually set by a launchd
agent contained in the bundle. The agent uses launchd's WatchPath
mechanism
in order to be notified when the user's ~/.MacOSX/environment.plist
changes.
Unfortunately, there is no way to specify a WatchPath
that is relative to the
user's home directory. By installing the EnvPane preference pane for individual
users, each instance can use a separate copy of the agent configuration in
~/Library/LaunchAgents
as opposed to globally in /Library/LaunchAgents
. The
second reason is that cleanly uninstalling the agent would be more complex for
a preference pane that was installed globally for all users. Apple is eagerly
deprecating privilege escalation mechanism left and right, leaving the
half-baked SMJobBless
and the rudimentary authopen
. I'm not saying it
couldn't be done, I'm just not convinced it'd be worth the effort.
Say, you have a shell session running in the Terminal application. You might wonder why changes to the environment made with EnvPane don't show up in the shell's environment. The answer to this question lies in Unix' process model. When a process is forked, it inherits a copy of the environment from its parent process. The copy is independent, so changes in the parent aren't visible in the child and vice versa. Doing anything else would undoubtedly fling open Pandora's box of concurrency.
Applications launched via Finder are in fact forked by the per-user instance of
launchd
, and thus inherit their environment from it. EnvPane uses launchd
's
API to modify the environment of the user's launchd
instance which will then
pass a copy of its modified environment to subsequently launched applications.
The environment of running applications has already been copied and will not
be affected.
For applications other than Terminal the only workaround is to restart the application. In Terminal on OS X 10.09 and older, you can update the shell's environment by running
eval `launchctl export`
This will update the shell's environment, not Terminal's. Terminal's
environment is still unchanged and will be passed on to each new shell window
or tab. This means you will have to run the above command in each subsequently
opened Terminal tab or window. Ultimately it might be better to just restart
Terminal. Unfortunately, 10.10 removed the export
functionality.
That's because OS X treats PATH differently to other environment variables, I
suspect for security reasons. The special treatment differs from version to
version of OS X but in a nutshell there are two issues: Firstly, launchd will
forcefully set PATH to a fixed value, overriding a value set using the standard
launchd APIs used by EnvPane. Secondly, a login shell launched in Terminal will
mangle the value by placing entries from /etc/paths
and /etc/paths.d
at the
beginning of the PATH variable. There are workarounds for both issues but
EnvPane doesn't currently implement those, mainly because they involve root
privileges, something I've shyed away from so far. You will have to perform
them manually. The launchd override for PATH can be configured using launchctl config user path
or launchctl config system path
. See the man launchctl
for details. I think the user
form of that command is broken on El Capitan,
so you'll have to resort to system
there. Amusingly, there is no documented
way revert to the defaults. You'll have to delete
/private/var/db/com.apple.xpc.launchd/config/system.plist
and/or
/private/var/db/com.apple.xpc.launchd/config/user.plist
and reboot. The
/etc/paths
issue can be worked around by duplicating the additional entries
from launchctl config … path
in /etc/paths
. See man path_helper
for
details.
My personal opinion is that the hardcoding of PATH by launchd is misguided. PATH was meant to be a mere convenience for interactive shell use. If a security-sensitive system component needs to ensure that a particular binary is executed, it should specify that binary using an absolute PATH.
Another rant: the fact that launchtl config user path
has system-wide scope
and therefore needs sudo privileges is also amusing. If it's called "user" then
it should be user-specific, not global.
Copyright 2012, 2016, 2017 Hannes Schmidt
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
Copyright 2008 IconTexto
http://www.icontexto.com
Released under CC License Attribution-Noncommercial 3.0
http://creativecommons.org/licenses/by-nc/3.0/
Copyright (c) 2005 Apple Computer, Inc. All rights reserved.
This product includes software developed by
David Loren Parsons <http://www.pell.portland.or.us/~orc>
Kudos to Jonathan Levin for his reversing of the new launchd and launchctl. I used the trial version of the Hopper Disassembler/debugger for OS X to figure out the rest.