RLBench is an ambitious large-scale benchmark and learning environment designed to facilitate research in a number of vision-guided manipulation research areas, including: reinforcement learning, imitation learning, multi-task learning, geometric computer vision, and in particular, few-shot learning. Click here for website and paper.
Contents:
- RLBench has been accepted to RA-L with presentation at ICRA!
- Ability to easily swap out arms added. See here.
- Gym is now supported!
- Given the scope of this project, we expect there to be a number of issues over the coming months. Please be patient during this time. After the initial few weeks of release, we will tag a commit as 'V1', which should then be used for benchmarking algorithms going forward. Once there are enough significant changes in the future, we will tag a new 'V2' commit, and so on. Versioning like this will ensure results remain consistent and reproducible as the benchmark grows.
- Currently, only live demos are available when requesting demos. Stored demos will be made available soon!
RLBench is built around PyRep and V-REP. First head to the PyRep github page and install.
If you previously had PyRep installed, you will need to update your installation!
Hopefully you have now installed PyRep and have run one of the PyRep examples. Now lets install RLBench:
pip3 install -r requirements.txt
python3 setup.py install --userAnd that's it!
The benchmark places particular emphasis on few-shot learning and meta learning due to breadth of tasks available, though it can be used in numerous ways.
We have created splits of tasks called 'Task Sets', which consist of a
collection of X training tasks and 5 tests tasks. Here X can be 10, 25, 50, or 95.
For example, to work on the task set with 10 training tasks, we import FS10_V1:
from rlbench.environment import Environment
from rlbench.action_modes import ActionMode, ArmActionMode
from rlbench.tasks import FS10_V1
import numpy as np
action_mode = ActionMode(ArmActionMode.ABS_JOINT_VELOCITY)
env = Environment(action_mode)
env.launch()
train_tasks = FS10_V1['train']
test_tasks = FS10_V1['test']
task_to_train = np.random.choice(train_tasks, 1)[0]
task = env.get_task(task_to_train)
task.sample_variation() # random variation
descriptions, obs = task.reset()
obs, reward, terminate = task.step(np.random.normal(action_mode.action_size))A full example can be seen in examples/few_shot_rl.py.
from rlbench.environment import Environment
from rlbench.action_modes import ActionMode, ArmActionMode
from rlbench.tasks import ReachTarget
import numpy as np
action_mode = ActionMode(ArmActionMode.ABS_JOINT_VELOCITY)
env = Environment(action_mode)
env.launch()
task = env.get_task(ReachTarget)
descriptions, obs = task.reset()
obs, reward, terminate = task.step(np.random.normal(8))A full example can be seen in examples/single_task_rl.py. If you would like to bootstrap from demonstrations, then take a look at examples/single_task_rl_with_demos.py.
from rlbench import DomainRandomizationEnvironment
from rlbench import RandomizeEvery
from rlbench import VisualRandomizationConfig
from rlbench.action_modes import ActionMode, ArmActionMode
from rlbench.tasks import OpenDoor
import numpy as np
# We will borrow some from the tests dir
rand_config = VisualRandomizationConfig(
image_directory='../tests/unit/assets/textures')
action_mode = ActionMode(ArmActionMode.ABS_JOINT_VELOCITY)
env = DomainRandomizationEnvironment(
action_mode, randomize_every=RandomizeEvery.EPISODE,
frequency=1, visual_randomization_config=rand_config)
env.launch()
task = env.get_task(OpenDoor)
descriptions, obs = task.reset()
obs, reward, terminate = task.step(np.random.normal(action_mode.action_size))A full example can be seen in examples/single_task_rl_domain_randomization.py.
from rlbench.environment import Environment
from rlbench.action_modes import ArmActionMode, ActionMode
from rlbench.tasks import ReachTarget
import numpy as np
# To use 'saved' demos, set the path below
DATASET = 'PATH/TO/YOUR/DATASET'
action_mode = ActionMode(ArmActionMode.ABS_JOINT_VELOCITY)
env = Environment(action_mode, DATASET)
env.launch()
task = env.get_task(ReachTarget)
demos = task.get_demos(2) # -> List[List[Observation]]
demos = np.array(demos).flatten()
batch = np.random.choice(demos, replace=False)
batch_images = [obs.left_shoulder_rgb for obs in batch]
predicted_actions = predict_action(batch_images)
ground_truth_actions = [obs.joint_velocities for obs in batch]
loss = behaviour_cloning_loss(ground_truth_actions, predicted_actions)A full example can be seen in examples/imitation_learning.py.
We have created splits of tasks called 'Task Sets', which consist of a
collection of X training tasks. Here X can be 15, 30, 55, or 100.
For example, to work on the task set with 15 training tasks, we import MT15_V1:
from rlbench.environment import Environment
from rlbench.action_modes import ActionMode, ArmActionMode
from rlbench.tasks import MT15_V1
import numpy as np
action_mode = ActionMode(ArmActionMode.ABS_JOINT_VELOCITY)
env = Environment(action_mode)
env.launch()
train_tasks = MT15_V1['train']
task_to_train = np.random.choice(train_tasks, 1)[0]
task = env.get_task(task_to_train)
task.sample_variation() # random variation
descriptions, obs = task.reset()
obs, reward, terminate = task.step(np.random.normal(action_mode.action_size))A full example can be seen in examples/multi_task_learning.py.
RLBench is Gym compatible! Ensure you have gym installed (pip3 install gym).
Simply select your task of interest from rlbench/tasks/, and then load the task by using the task name (e.g. 'reach_target') followed by the observation mode: 'state' or 'vision'.
import gym
import rlbench.gym
env = gym.make('reach_target-state-v0')
# Alternatively, for vision:
# env = gym.make('reach_target-vision-v0')
training_steps = 120
episode_length = 40
for i in range(training_steps):
if i % episode_length == 0:
print('Reset Episode')
obs = env.reset()
obs, reward, terminate, _ = env.step(env.action_space.sample())
env.render() # Note: rendering increases step time.
print('Done')
env.close()A full example can be seen in examples/rlbench_gym.py.
The default Franka Panda Arm can be swapped out for another. This can be useful for those who have custom tasks or want to perform sim-to-real experiments on the tasks. However, if you swap out the arm, then we can't guarantee that the task will be solvable. For example, the Mico arm has a very small workspace in comparison to the Franka.
For benchmarking, the arm should remain as the Franka Panda.
Currently supported arms:
- Franka Panda arm with Franka gripper
(franka) - Mico arm with Mico gripper
(mico) - Jaco arm with 3-finger Jaco gripper
(jaco) - Sawyer arm with Baxter gripper
(sawyer)
You can then swap out the arm using robot_configuration:
env = Environment(action_mode=action_mode, robot_configuration='jaco')A full example (using the Jaco) can be seen in examples/swap_arm.py.
Don't see the arm that you want to use? Your first step is to make sure it is in PyRep, and if not, then you can follow the instructions for importing new arm on the PyRep GitHub page. After that, feel free to open an issue and we can being it in to RLBench for you.
The task building tool is the interface for users who wish to create new tasks to be added to the RLBench task repository. Each task has 2 associated files: a V-REP model file (.ttm), which holds all of the scene information and demo waypoints, and a python (.py) file, which is responsible for wiring the scene objects to the RLBench backend, applying variations, defining success criteria, and adding other more complex task behaviours.
Here are some in-depth tutorials:
New tasks using our task building tool, in addition to bug fixes, are very welcome! When building your task, please ensure that you run the task validator in the task building tool.
A full contribution guide is coming soon!
Models were supplied from turbosquid.com, cgtrader.com, free3d.com, thingiverse.com, and cadnav.com.
@article{james2019rlbench,
title={RLBench: The Robot Learning Benchmark \& Learning Environment},
author={James, Stephen and Ma, Zicong and Rovick Arrojo, David and Davison, Andrew J.},
journal={arXiv preprint arXiv:1909.12271},
year={2019}
}