vulkan, the ultimate Python binding for Vulkan API

• Presentation
• How to install
  • Pip
  • Manual install
• How to use
  • Getting started
  • API
  • Code convention
    • Structs
    • Functions
    • Exceptions
    • Constants
  • Resources
• How to contribute
• Architecture
• Community
• Stay in touch
• History
• Supported By

vulkan is a Python extension which supports the Vulkan API. It leverages power of Vulkan with simplicity of Python. It's a complete Vulkan wrapper, it keeps the original Vulkan API and try to limit differences induced by Python.

vulkan is compatible with Python 2 and Python 3.

You can install directly vulkan with pip:

pip install vulkan

You can install it manually if you want the latest version:

git clone https://github.com/realitix/vulkan
cd vulkan
python setup.py install

To try this wrapper, execute the following commands (on linux):

git clone https://github.com/realitix/vulkan.git
cd vulkan
python setup.py install
pip install pysdl2
python example/example_sdl2.py

Known errors :

OSError: cannot load library 'libvulkan.so' means you didn't install the Vulkan SDK.

vulkan.VkErrorExtensionNotPresent means your have installed the Vulkan SDK but your driver doesn't support it.

pip install vulkan fails on Windows 10: Try pip install --upgrade pip setuptools wheel before installing vulkan.

The vulkan wrapper gives you complete access to the Vulkan API, including extension functions.

Similar to Vulkan, structs are prefixed with Vk, enumeration values are prefixed with VK_ and functions are prefixed with vk.

Vulkan struct creation is achieved in vulkan wrapper using python functions. For example, if you want to create the Vulkan struct VkInstanceCreateInfo, you must initialize it with its keyword parameters. In vulkan wrapper, you will call the Python function VkInstanceCreateInfo with named parameters as shown below.

In C (Vulkan) we write:

VkInstanceCreateInfo instance_create_info = {
    VK_STRUCTURE_TYPE_INSTANCE_CREATE_INFO, // sType
    nullptr, // pNext
    0, // flags
    &application_info, // *pApplicationInfo
    3, // enabledLayerCount
    &layers, // *ppEnabledLayerNames
    3, // enabledExtensionCount
    &extensions // *ppEnabledExtensionNames
};

Our vulkan wrapper equivalent of the above C code is :

import vulkan as vk

instance_create_info = vk.VkInstanceCreateInfo(
    sType=vk.VK_STRUCTURE_TYPE_INSTANCE_CREATE_INFO,
    pNext=None,
    flags=0,
    pApplicationInfo=application_info,
    enabledLayerCount=len(layers),
    ppEnabledLayerNames=layers,
    enabledExtensionCount=len(extensions),
    ppEnabledExtensionNames=extensions,
)

To create the struct, you must remember to pass all parameters at creation time. This includes the Vulkan layers and extensions denoted by ppEnabledLayerNames and ppEnabledExtensionNames, which vulkan wrapper is able to facilitate too.

This struct example demonstrates how vulkan wrapper conveniently converts your Python code into native C types.

Note:

• The default value for all parameters is None so you could have omitted pNext (because its value is None).
• The default value for sType parameter is the good value so you could have omitted sType.
• The default value for enabledLayerCount parameter is the length of ppEnabledLayerNames so you could have omitted enabledLayerCount and enabledExtensionCount.
• Order of parameters doesn't matter since they are keyword parameters.
• The C syntax is more risky because you must pass all parameters in specific order.

vulkan greatly simplifies the calling of functions. In Vulkan API, you have to explicitly write three kinds of function:

• functions that create nothing
• functions that create one object
• functions that create several objects

In vulkan wrapper, all these troubles goes away. vulkan will takes care of you and knows when to return None, an object or a list. Here are three examples:

# Create one object
instance = vk.vkCreateInstance(createInfo, None)

# Create a list of object
extensions = vk.vkEnumerateDeviceExtensionProperties(physical_device, None)

# Return None
vk.vkQueuePresentKHR(presentation_queue, present_create)

Vulkan functions usually return a VkResult, which returns the success and error codes/states of the function. vulkan is pythonic and converts VkResult to exception: if the result is not VK_SUCCESS, an exception is raised. More elaboration is given in the next section.

• vulkan has two types of Exceptions, namely VkError or VkException. The VkError exception handles all the error codes reported by Vulkan's VkResult. The VkException exception handles all the success code reported by Vulkan's VkResult, except the VK_SUCCESS success code.

• Exception names are pythonized: VK_NOT_READY -> VkNotReady.

All Vulkan constants are available in vulkan and it even provides some fancy constants like UINT64_MAX.

To understand how to use this wrapper, you have to look for example/exemple_* files or refer to Vulk engine.

To contribute, you should first read the Architecture section. Any contribution is welcome and I answer quickly.

vulkan is a CFFI module generated by a Python script.

When you install this module, you need two files:

• vulkan/vulkan.cdef.h containing CFFI definitions
• vulkan/_vulkan.py containing the actual executed Python script

Theses two files are generated by the generator/generate.py script.

vulkan/vulkan.cdef.h is generated with a cpp command call, it applies pre-processing to the Vulkan C header. It can't work as is because of pycparser which cannot parse the output. That's the purpose of fake_libc_include folder.

vulkan/_vulkan.py needs more work. To proceed, the generator computes a model of Vulkan API based on vk.xml (the file from Kronos describing the API) and then uses a jinja2 template to write the file.

Here the basic steps:

• Load vk.xml
• Use xmltodict to parse the xml document
• Generate a good data model from it
• Pass the model to the vulkan.template.py file
• The template engine generate the final Python file

You can checkout my blog, I speak about vulkan: Blog

You can contact me by opening issue (bug or interesting discussion about the project). If you want a fast and pleasant talk, join the irc channel: ##vulkan (I'm realitix). I'm connected from 9AM to 6PM (France).

This module comes from a long journey. I have first created CVulkan. CVulkan is a wrapper created in plain C, plain C is hard to maintain... So I have decided to restart with CFFI which is from far the best way to do it. There was a module pyVulkan that did what I wanted to do. But it was not working and the code was hard to maintain. I asked to the maintainer to let me help him but I got no answer. I forked his project and I rewrote every single part to obtain a good module.

vulkan is supported by helpful 3rd parties via code contributions, test devices and so forth. Make our supporters happy and visit their sites!