This module is designed to configure Eucalyptus components on physical nodes. It contains classes for the 5 main software components as well as certain OS dependencies. So far, it has been tested with CentOS and Puppet 3.2.x

Eucalyptus

• DNS works, period
• At least 4 nodes are available:
  • puppet master (cannot cohabitate with eucalyptus due to postgres-related issues), or master
  • CLC & Walrus (cloud controller and persistent storage layer), or clc_walrus
  • SC & CC (storage controller and cluster controller), or sc_cc
  • NC (node controller), or nc
• access to WAN/Internet
• all iptables rules are flushed (iptables -F)
• user is logged in as root or at least has sudo privileges
• for the purposes of a research environment, we will enable autosigning certificates on the puppet master
• git is present and functional
  • yum install -y git, e.g.
• the current version of this module relies on eventual consistency; future versions may have better cross-node state management
• the module currently does not attempt to configure a load balancer instance or service, this results in a lot of error messages in euca-describe-services -E
• Eucalyptus requires that all nodes have active ntp services

• Install and configure Puppet Enterprise 3.0.1 master/console/puppetdb role on master node
  • test to make sure that puppet agent -t works on master
  • create /etc/puppetlabs/puppet/autosign.conf with content => "*"
    • this will automatically sign incoming CSRs, and should be considered insecure for user-facing production
    • See docs.puppetlabs.com for more details
• install required modules (cwd: /etc/puppetlabs/puppet/modules):
  • git clone https://github.com/dhgwilliam/puppetlabs-eucalyptus.git eucalyptus
  • stdlib is also required, but ships with PE so is already present
• install puppet agent on the remaining nodes
  • see DNS and iptables assumptions above
  • test puppet agent -t on these nodes as well
• using /etc/puppetlabs/puppet/manifests/site.pp (PE's default manifest), classify the nodes as follows:
  • note the fake node for sharing eucalyptus_config via inheritance
  • the node names used here are for documentation and should be changed to reflect the full FQDN of the node in question
  • note, also, the use of the eucalyptus::cluster resource declaration. here we assume the default cloud and cluster names are used (cloud1 and cluster1)
  • this is NOT a complete site.pp and should probably be appended to whatever already exists in site.pp

node 'eucalyptus_config' {
  class { 'eucalyptus::conf':
    vnet_mode => 'MANAGED',
    vnet_subnet => '172.20.0.0',
    vnet_netmask => '255.255.0.0',
    vnet_dns => '10.2.0.5',
    vnet_addrspernet => '256',
    vnet_publicips => '10.2.3.100-10.2.3.250',
    vnet_privinterface => 'eth1',
    vnet_pubinterface => 'eth0',
    vnet_bridge => 'br0',
    hypervisor => 'kvm',
    use_virtio_disk => '1',
    use_virtio_root => '1',
    use_virtio_net => '1',
    instance_path => '/var/lib/eucalyptus/instances',
    vnet_dhcpdaemon => '/usr/sbin/dhcpd41',
    schedpolicy => 'ROUNDROBIN',
    eucalyptus_loglevel => 'DEBUG',
    cloud_opts => 'none',
  }
}

# clc and walrus
node 'clc_walrus' inherits 'eucalyptus_config' {
  include eucalyptus::clc
  include eucalyptus::walrus
  Exec['init-clc'] -> Exec["reg_walrus_${::hostname}"]
  eucalyptus::cluster { 'cloud1_cluster1':
    cloud_name   => 'cloud1',
    cluster_name => 'cluster1',
  }
}

# sc and cc
node 'sc_cc' inherits 'eucalyptus_config' {
  include eucalyptus::sc
  include eucalyptus::cc
}

# nc
node 'nc' inherits 'eucalyptus_config' {
  include eucalyptus::nc
}

• run puppet agent -t on clc_walrus
  • the first time you will likely notice one or more failed exec resources due to eucalyptus' services startup time
  • you can confirm which eucalyptus services are online by taking the following steps (on clc_walrus):
    • cd
    • euca_conf --get-credentials admin.zip
    • unzip admin.zip
    • source eucarc
      • you may see an error about Walrus, it's safe to ignore
    • euca-describe-services -E
      • once you have retrieved the credentials, you should not need to repeat the euca_conf and unzip steps, but you will need to run source ~/eucarc every time you start a new bash session
      • the goal state is ENABLED or DISABLED for all listed services (services may show NOTREADY until they have completed startup)
      • the loadbalancing service may show NOTREADY in eucalyptus 3.3
    • the output of facter -p | grep euca should resemble the following:

eucakeys_cloud_cert => LS0tLS1CRUdJTiBDRVJUSUZJQ0FURS0tLS0tCk1JSURJVENDQWdtZ0F3SUJB
eucakeys_cloud_pk => LS0tLS1CRUdJTiBSU0EgUFJJVkFURSBLRVktLS0tLQpNSUlFb3dJQkFBS0NB
eucakeys_euca_p12 => MIACAQMwgAYJKoZIhvcNAQcBoIAkgASCA gwgDCABgkqhkiG9w0BBwGggCSA

• run puppet agent -t on sc_cc
  • this should install the SC and CC packages & start the services
  • this will also export the registration commands for consumption on clc_walrus, which will generate the certs for cluster1
• run puppet agent -t until:
  • curl -G -H "Accept: application/json" 'http://localhost:8080/v2/resources/File/cloud1_cluster1_cluster_cert' --data-urlencode 'query=["=","exported", true]' 2> /dev/null | grep content run on the master resembles:

"content" : "-----BEGIN CERTIFICATE-----
MIIDITCCAgmgAwIBAgIGFKrBPFRHMA0GCSqGSIb3DQEBDQUAMEcxCzAJBgNVBAYT
AlVTMQ4wDAYDVQQKEwVDbG91ZDETMBEGA1UECxMKRXVjYWx5cHR1czETMBEGA1UE
AwwKY2Mtc2Nfc2NjYzAeFw0xMzA5MDYwMDUwMzFaFw0xODA5MDYwMDUwMzFaMEcx
CzAJBgNVBAYTAlVTMQ4wDAYDVQQKEwVDbG91ZDETMBEGA1UECxMKRXVjYWx5cHR1
czETMBEGA1UEAwwKY2Mtc2Nfc2NjYzCCASIwDQYJKoZIhvcNAQEBBQADggEPADCC
AQoCggEBAIlLMm54teOlwEmzKBuJTUrWR9vjkmM358IWhgQoWY8 ChOrErIvCfMt
vosJYPjbbop2pUnsU2c8OWwyRTr4t6AyEYe7qqVzSqbrzS5/Mq4QsSk96 dir5Jg
anDtMjmqkf41sfuhss1HF7/gf7oC9/klA5/tfug9EDu6HoBSZ ulYU0n3kZvP8WW
IyLdiJX8XlMU7QZrrO8sZpHX2j6kTPZ9ntfWtWRckL4zi9Qz7c7I1/hVgoqK1qss
DWZKrDHUOKFKB1rvQ6kJDVZoYzJ8LXQl1VMg6WaJKgdIsr5//spritHwsxwGSYe1
WXoHZRSeF8hx1e6Q6LGEHhaO3LG9rA8CAwEAAaMTMBEwDwYDVR0TAQH/BAUwAwEB
/zANBgkqhkiG9w0BAQ0FAAOCAQEAJehd5R0Gl/K5KM1IjJcpZRG5G89FYgrhfQY6
gnzHqev8fPRKFdyGTxGIIfYtay2J KV8Jzgfr/I84GHOof9rGIOsZ2l jbiLhwoW
LTuxEDZSg6EvZxy6GtouDjol7dPrcFW0gAxLklKE2Yqn5lBUo6WVZqTxmKlV5hD5
zZj2TmfkmSVLX3kON3DTQ9HYHJONYLRZmEuIFR7PYPhnFl6E8j9zlNBbjpA4uSDC
Xg2weg0 WQLcHBxVXqICxsoctlnblU7 rAB3hsiaH0hGS1WyPJUFkSfpStmhMAKO
QF6xdIzV/lvnuJ4154aA2ipKiJtLcPvjDPXvv6oiTQytzC3HEg==
-----END CERTIFICATE-----",

• run puppet agent -t on sc_cc
  • this should drop the cluster1 certs into /var/lib/eucalyptus/keys
  • check the state of the certs on sc_cc with
    • ls -alrt /var/lib/eucalyptus/keys
    • There should be NO 0 byte files in this directory
• now run puppet agent -t on clc_walrus to register the SC & CC services

• the first Node Controller instance has already been classified in your default manifest and the puppet agent role should be installed
• run puppet agent -t on the nc node
  • this should install the eucalyptus reops, packages and the NC service, as well as exporting the registration command for consumption on the clc
• run puppet agent -t on the sccc node,
  • look for:
    • Notice: /Stage[main]/Eucalyptus::Cc::Eucalyptus::Cc_reg/Exec[cluster1_reg_nc_node-controller]/returns: executed successfully
  • and confirm by checking euca-describe-nodes on clc_walrus

• OOTB, PuppetDB does not purge your database of exported resources or old nodes ever
• In order to avoid complications from decommissioned nodes, take the following steps:
  • deactive the node in puppetdb by running this command on the master:
    • puppet node deactivate <certname>
  • deregister the euca service with the euca_conf command on the clc, e.g. to deregister the CC service that we set up:
    • euca_conf --deregister-cluster cluster1 cc_sccc