An onboard realtime status display for Renault ZOE

• Arduino Uno Rev3
• CAN-BUS Shield
  • For example: https://www.seeedstudio.com/CAN-BUS-Shield-V1-2-p-2256.html
• Arduino LCD KeyPad Shield
  • For example: https://www.dfrobot.com/wiki/index.php/Arduino_LCD_KeyPad_Shield_(SKU:_DFR0009)
• DB9 to OBD2 Cable
  • For example: https://www.seeedstudio.com/DB9-to-OBD2-Cable-With-Switch-p-2872.html
• Optional: any prototype shield to lift the LCD shield

• https://github.com/premultiply/MCP_CAN_lib
• https://github.com/premultiply/LcdBarGraph
• https://github.com/rlogiacco/AnalogButtons
• https://github.com/Chris--A/PrintEx
• https://github.com/RobTillaart/Arduino/tree/master/libraries/StopWatch
• http://playground.arduino.cc/Code/Timer1

For operation, it is necessary that the pin 10 of the display in the direction of CAN-Shield (and Arduino) is simply pinched off or bent so that it does not contact down.

The bridge, as it is written on the ZOE display, is not absolutely necessary.

Activate filters and masks to quickly get the necessary data.