Just kidding, it's really Linux nginx [engine x] MySQL PHP-FPM, that's where the LEMP comes from. MacOS LEMP Setup is just like Local by Flywheel or XAMPP, WAMP, Hammer, Anvil etc. tools like this, but it concentrates on the native way of running a web server just by using native Linux packages ported for macOS via Homebrew. It's always fast, always on.

• Windows version
• Linux version

macOS LEMP Setup is Mac only!

• Windows: Setting up a local server on Windows 10 for WordPress theme development (or any web development for that matter).
• Linux: Pop!_OS LEMP setup instructions by raikasdev.

• Latest Homebrew
• MacBook Pro M1 (if you like to install this on Intel mac, refer to this tutorial)
• macOS Monterey 12.3 or later

For Front End development, a full Vagrant box, docker container per site or Local by Flywheel is not really needed. If you have a Macbook Pro, you can install local LEMP (Linux, nginx, MariaDB and PHP) with this single liner below.

Please see installation steps instructions first.

/bin/bash -c "$(curl -fsSL https://raw.githubusercontent.com/digitoimistodude/macos-lemp-setup/master/install.sh)"

Oneliner may not go through in macOS Big Sur and macOS Monterey, in that caes you need to copy and paste commands manually from install.sh.

Please note: Don't trust blindly to the script, use only if you know what you are doing. You can view the file here if having doubts what commands are being run. However, script is tested working many times and should be safe to run even if you have some or all of the components already installed.

1. Background
2. Features
3. Requirements
4. Installation
5. Post installations
   1. Mailhog
6. Use Linux-style aliases
7. File sizes
8. XDebug
9. Redis
10. Troubleshooting

Read the full story by @ronilaukkarinen: Moving from Vagrant to a LEMP stack directly on a Macbook Pro (for WordPress development)

• PHP 8.3
• nginx 1.25.3
• Super lightweight
• Native packages
• Always on system service
• HTTPS support
• Consistent with production setup

• Homebrew
• macOS, preferably 14.2.1 (Sonoma)
• wget
• mkcert

1. Run oneliner installation script /bin/bash -c "$(curl -fsSL https://raw.githubusercontent.com/digitoimistodude/macos-lemp-setup/master/install.sh)"
2. Link PHP executable like this: Run: sudo find / -name 'php'. When you spot link that looks like this (yours might be different version) /usr/local/Cellar/[email protected]/8.3.3/bin/php, symlink it to correct location to override MacOS's own file: sudo ln -s /usr/local/Cellar/[email protected]/8.3.3/bin/php /usr/local/bin/php
3. Use PHP path from correct location by adding to your ~/.bash_profile file, sudo nano ~/.bash_profile (change your PHP version accordingly)

   export PATH="$(brew --prefix [email protected])/bin:$PATH"

4. Check the version with php --version, it should match the linked file.
5. Brew should have already handled other links, you can test the correct versions with sudo mysql --version (if it's something like mysql Ver 15.1 Distrib 10.5.5-MariaDB, for osx10.15 (x86_64) using readline 5.1 it's the correct one) and sudo nginx -v (if it's something like nginx version: nginx/1.19.3 it's the correct one)
6. Add export PATH="$(brew --prefix [email protected])/bin:$PATH" to .bash_profile (or to your zsh profile or to whatever term profile you are currently using)
7. Go through post installations
8. Enjoy! If you use dudestack, please check instructions from its own repo.

You may want to add your user and group correctly to /opt/homebrew/etc/php/8.3/php-fpm.d/www.conf (or wherever your www.conf is, find with sudo find / -name 'www.conf') and set these to the bottom:

catch_workers_output = yes
php_flag[display_errors] = On
php_admin_value[error_log] = /var/log/fpm-php.www.log 
slowlog = /var/log/fpm-php.slow.log 
php_admin_flag[log_errors] = On
php_admin_value[memory_limit] = 1024M
request_slowlog_timeout = 10
php_admin_value[upload_max_filesize] = 100M
php_admin_value[post_max_size] = 100M

Please note, if the file is not found (as the location may also be something like /System/Volumes/Data/opt/homebrew/etc/php/8.3/php-fpm.d/www.conf), you can find the correct location with:

sudo find / -name 'www.conf'

Make sure you have your user and group defined, use these as base (only change rolle to your own Mac username):

; Unix user/group of processes
; Note: The user is mandatory. If the group is not set, the default user's group
;       will be used.
user = rolle
group = admin

Also make sure you have listen set up properly

; The address on which to accept FastCGI requests.
; Valid syntaxes are:
;   'ip.add.re.ss:port'    - to listen on a TCP socket to a specific IPv4 address on
;                            a specific port;
;   '[ip:6:addr:ess]:port' - to listen on a TCP socket to a specific IPv6 address on
;                            a specific port;
;   'port'                 - to listen on a TCP socket to all addresses
;                            (IPv6 and IPv4-mapped) on a specific port;
;   '/path/to/unix/socket' - to listen on a unix socket.
; Note: This value is mandatory.
listen = 127.0.0.1:9500

Make sure you have default vhost for your site (/etc/nginx/sites-enabled/sitename.test) could be something like:

server {
    listen 80;
    root /var/www/example;
    index index.html index.htm index.php;
    server_name example.test www.example.test;
    include php7.conf;
    include global/wordpress.conf;
}

Default my.cnf would be something like this (already added by install.sh in /usr/local/etc/my.cnf:

#
# This group is read both both by the client and the server
# use it for options that affect everything
#
[client-server]

#
# include all files from the config directory
#
!includedir /usr/local/etc/my.cnf.d

[mysqld]
innodb_log_file_size = 32M
innodb_buffer_pool_size = 1024M
innodb_log_buffer_size = 4M
slow_query_log = 1
query_cache_limit = 512K
query_cache_size = 128M
skip-name-resolve

Again, if the correct file cannot be found, you can find it with:

sudo find / -name 'my.cnf'

For mysql, remember to run sudo mysql_secure_installation, answer as suggested, add/change root password, remove test users etc. Only exception! Answer with n to the question Disallow root login remotely? [Y/n]. Your logs can be found at /usr/local/var/mysql/yourcomputername.err (where yourcomputername is obviously your hostname).

After that, get to know dudestack to get everything up and running smoothly. Current version of dudestack supports macOS LEMP stack.

You should remember to add vhosts to your /etc/hosts file, for example: 127.0.0.1 site.test.

You should find the correct files and link them like in Linux. This helps you to remember the correct paths.

For example (please note, this is just an example):

sudo mkdir -p /usr/local/bin
sudo ln -s /opt/homebrew/Cellar/[email protected]/8.3.3/bin/php /usr/local/bin/php
sudo ln -s /opt/homebrew/Cellar/[email protected]/8.3.3/sbin/php-fpm /usr/local/bin/php-fpm
sudo ln -s /opt/homebrew/Cellar/[email protected]/8.3.3/sbin/php-fpm /usr/local/bin/php-fpm
sudo ln -s /opt/homebrew/etc/php /etc/php
sudo ln -s /opt/homebrew/etc/nginx /etc/nginx
sudo ln -s /opt/homebrew/etc/my.cnf /etc/my.cnf

Add this to /usr/local/bin/service and chmod it x:

#!/bin/bash
# Alias for unix type of commands
brew services "$2" "$1";

Now you are able to restart nginx and mysql unix style like this:

sudo service nginx restart
sudo service mariadb restart

E-mails won't be sent on local environment because there is no email server configured. This is where MailHog comes in.

MailHog should be pre-installed but if not, run following:

brew update && brew install mailhog

Ensure you have the latest air-helper or MailHog for WordPress activated to enable MailHog routing for local environment.

Then just run:

mailhog

You should now get a log in command line and web interface is available in http://0.0.0.0:8025/.

You might want to increase file sizes for development environment in case you need to test compression plugins and other stuff in WordPress. To do so, edit /usr/local/etc/php/8.3/php-fpm.d/www.conf and /usr/local/etc/php/8.3/php.ini and change all memory_limit, post_max_size and upload_max_filesize to something that is not so limited, for example 500M.

Please note, you also need to change client_max_body_size to the same amount in /etc/nginx/nginx.conf. After this, restart php-fpm with sudo brew services restart [email protected] and nginx with sudo brew services restart nginx.

First things first, if you haven't done it yet, generate general dhparam:

sudo su -
cd /etc/ssl/certs
sudo openssl dhparam -dsaparam -out dhparam.pem 4096

Generating certificates for dev environment is easiest with mkcert. After installing mkcert, just run:

mkdir -p /var/www/certs && cd /var/www/certs && mkcert "project.test"

Then edit your vhost as following (change all from project to your project name):

server {
    listen 443 ssl;
    http2 on;
    root /var/www/project;
    index index.php;    
    server_name project.test;

    include php7.conf;
    include global/wordpress.conf;

    ssl_certificate /var/www/certs/project.test.pem;
    ssl_certificate_key /var/www/certs/project.test-key.pem;
    ssl_protocols TLSv1 TLSv1.1 TLSv1.2;
    ssl_prefer_server_ciphers on;
    ssl_dhparam /etc/ssl/certs/dhparam.pem;
    ssl_ciphers 'ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-DSS-AES128-GCM-SHA256:kEDH AESGCM:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA:ECDHE-ECDSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-DSS-AES128-SHA256:DHE-RSA-AES256-SHA256:DHE-DSS-AES256-SHA:DHE-RSA-AES256-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:AES:CAMELLIA:DES-CBC3-SHA:!aNULL:!eNULL:!EXPORT:!DES:!RC4:!MD5:!PSK:!aECDH:!EDH-DSS-DES-CBC3-SHA:!EDH-RSA-DES-CBC3-SHA:!KRB5-DES-CBC3-SHA';
    ssl_session_timeout 1d;
    ssl_session_cache shared:SSL:50m;
    ssl_stapling_verify on;
    add_header Strict-Transport-Security max-age=15768000;
}

server {
    listen 80;
    server_name project.test;
    return 301 https://$host$request_uri;
}

Test with sudo nginx -t and if everything is OK, restart nginx.

1. Check your PHP version with php --version and location with which php. If the location points to /usr/bin/php, you are mistakenly using macOS built-in PHP. Change PHP path to correct location by adding to your ~/.bash_profile file, sudo nano ~/.bash_profile (change your PHP version accordingly):

   export PATH="$(brew --prefix [email protected])/bin:$PATH"

2. Install xdebug

brew install shivammathur/extensions/[email protected]

$ php --version
PHP 8.3.3 (cli) (built: Feb 13 2024 15:41:14) (NTS)
Copyright (c) The PHP Group
Zend Engine v4.3.3, Copyright (c) Zend Technologies
    with Xdebug v3.3.1, Copyright (c) 2002-2023, by Derick Rethans
    with Zend OPcache v8.3.3, Copyright (c), by Zend Technologies

7. Check where your php.ini file is with php --ini
8. Edit php.ini, for example sudo nano
9. Make sure these are on the first lines:

xdebug.mode=develop
xdebug.client_port=9003
xdebug.client_host=127.0.0.1
xdebug.remote_handler=dbgp
xdebug.start_with_request=yes
xdebug.discover_client_host=0
xdebug.show_error_trace = 1
xdebug.max_nesting_level=250
xdebug.var_display_max_depth=10
xdebug.log=/var/log/xdebug.log

10. Save and close with ctrl O and ctrl X
11. Make sure the log exists sudo touch /var/log/xdebug.log && sudo chmod 777 /var/log/xdebug.log
12. Restart services (requires Linux-style aliases) sudo service [email protected] restart && sudo service nginx restart
13. Install PHP Debug VSCode plugin
14. Add following to launch.json (cmd shift P, "Open launch.json"):

{
  "version": "0.2.0",
  "configurations": [
    {
      //"debugServer": 4711, // Uncomment for debugging the adapter
      "name": "Listen for Xdebug",
      "type": "php",
      "request": "launch",
      "port": 9003,
      "log": true
    },
    {
      //"debugServer": 4711, // Uncomment for debugging the adapter
      "name": "Launch",
      "request": "launch",
      "type": "php",
      "program": "${file}",
      "cwd": "${workspaceRoot}",
      "externalConsole": false
    }
  ]
}

15. Xdebug should now work on your editor
16. PHPCS doesn't need xdebug but will warn about it not working... this causes error in phpcs-vscode because it depends on outputted phpcs json that is not valid with the warning "Xdebug: [Step Debug] Could not connect to debugging client. Tried: 127.0.0.1:9003 (through xdebug.client_host/xdebug.client_port) :-(". This can be easily fixed by installing a bash "wrapper":
17. Rename current phpcs with sudo mv /usr/local/bin/phpcs /usr/local/bin/phpcs.bak
18. Install new with sudo nano /usr/local/bin/phpcs:

#!/bin/bash
XDEBUG_MODE=off /Users/rolle/Projects/phpcs/bin/phpcs "$@"

19. Add permissions sudo chmod x /usr/local/bin/phpcs
20. Make sure VSCode settings.json has this setting:

"phpcs.executablePath": "/usr/local/bin/phpcs",

Redis is an open source, in-memory data structure store, used as a database, cache. We are going to install Redis and php-redis.

Before installation, make sure you do not use PHP provided by macOS. You should be using PHP installed by homebrew. If you are having problems with testing php-redis after installation, it is most probably caused bacuse of using wrong PHP. See Troubleshooting: Testing which version of PHP you run for more information.

1. Check that pecl command works
2. Run brew update first
3. Install Redis, brew install redis
4. Start Redis brew services start redis, this will also make sure that Redis is always started on reboot
5. Test if Redis server is running redis-cli ping, expected response is PONG
6. Install PHP Redis extension pecl install redis.
7. Restart nginx and php-redis should be available, you can test it with php -r "if (new Redis() == true){ echo \"\r\n OK \r\n\"; }" command, expected response is OK

If you get something like this:

PHP Warning:  PHP Startup: Unable to load dynamic library 'redis.so' (tried: /opt/homebrew/lib/php/pecl/20190902/redis.so (dlopen(/opt/homebrew/lib/php/pecl/20190902/redis.so, 0x0009): tried: '/opt/homebrew/lib/php/pecl/20190902/redis.so' (no such file), '/System/Volumes/Preboot/Cryptexes/OS/opt/homebrew/lib/php/pecl/20190902/redis.so' (no such file), '/opt/homebrew/lib/php/pecl/20190902/redis.so' (no such file)), /opt/homebrew/lib/php/pecl/20190902/redis.so.so (dlopen(/opt/homebrew/lib/php/pecl/20190902/redis.so.so, 0x0009): tried: '/opt/homebrew/lib/php/pecl/20190902/redis.so.so' (no such file), '/System/Volumes/Preboot/Cryptexes/OS/opt/homebrew/lib/php/pecl/20190902/redis.so.so' (no such file), '/opt/homebrew/lib/php/pecl/20190902/redis.so.so' (no such file))) in Unknown on line 0

Install phpredis from source:

git clone https://www.github.com/phpredis/phpredis.git
cd phpredis
phpize && ./configure && make && sudo make install

Then take copy the outputted library path, it will be something like this: /opt/homebrew/Cellar/[email protected]/8.3.3/pecl/20190902/.

Run php --ini and modify your php.ini with nano -w /path/to/php.ini.

Replace extension="redis.so" with extension="/opt/homebrew/Cellar/[email protected]/8.3.3/pecl/20190902/redis.so" where the path is the one you copied. Restart nginx just in case. After this phpredis should work.

Test with php --version what version of PHP you are using, if the command returns something like PHP is included in macOS for compatibility with legacy software and especially when which php is showing /usr/bin/php then you are using macOS built-in version (which will be removed in the future anyway) and things most probably won't work as expected.

To fix this, first find the PHP:

sudo find / -name 'php'

Look for the bin under Cellar or homebrew dirs. Then run command with your php bin, for example: sudo ln -s /usr/local/Cellar/[email protected]/8.3.3/bin/php /usr/local/bin/php. This symlinks the homebrew version to be used instead of macOS version OR use bashrc export as defined here in step 4.

If you have something like this in your /var/log/nginx/error.log:

2019/08/12 14:09:04 [crit] 639#0: *129 open() "/usr/local/var/run/nginx/client_body_temp/0000000005" failed (13: Permission denied), client: 127.0.0.1, server: project.test, request: "POST /wp/wp-admin/async-upload.php HTTP/1.1", host: "project.test", referrer: "http://project.test/wp/wp-admin/upload.php"

If you cannot login to mysql from other than localhost, please answer with n to the question Disallow root login remotely? [Y/n] when running sudo mysql_secure_installation.

Make sure you run nginx and php-fpm on your root user and mariadb on your regular user. This is important. Stop nginx from running on your default user by brew services stop nginx and run it with sudo sudo brew services start nginx.

sudo brew services list should look like this:

~ sudo brew services list
Name       Status  User  Plist
dnsmasq    started root  /Library/LaunchDaemons/homebrew.mxcl.dnsmasq.plist
mariadb    started rolle /Users/rolle/Library/LaunchAgents/homebrew.mxcl.mariadb.plist
nginx      started root  /Library/LaunchDaemons/homebrew.mxcl.nginx.plist
php        started root  /Library/LaunchDaemons/[email protected]

You may have "unknown" or "error" as status or different PHP version, that is not a problem if ther server runs. User should be like in the list above. Then everything should work.

If you get problems like:

ERROR 2002 (HY000): Can't connect to MySQL server on '127.0.0.1' (36)

It seems you have messed up with your root password. Try resetting root password with by adding this to your home directory (for example /Users/rolle/mysql-init):

Try resetting root password with (add new password in place of YOUR_NEW_PASSWORD):

ALTER USER 'root'@'localhost' IDENTIFIED BY 'YOUR_NEW_PASSWORD';

Then kill all mysql processes:

sudo ps xa |grep mysql
kill -9 <pid>

Then run:

mysqld --init-file=/Users/rolle/mysql-init &

After this:

sudo mysql_secure_installation

Answer:

NOTE: RUNNING ALL PARTS OF THIS SCRIPT IS RECOMMENDED FOR ALL MariaDB
      SERVERS IN PRODUCTION USE!  PLEASE READ EACH STEP CAREFULLY!

In order to log into MariaDB to secure it, we'll need the current
password for the root user. If you've just installed MariaDB, and
haven't set the root password yet, you should just press enter here.

Enter current password for root (enter for none): 
OK, successfully used password, moving on...

Setting the root password or using the unix_socket ensures that nobody
can log into the MariaDB root user without the proper authorisation.

You already have your root account protected, so you can safely answer 'n'.

Switch to unix_socket authentication [Y/n] n
 ... skipping.

You already have your root account protected, so you can safely answer 'n'.

Change the root password? [Y/n] n
 ... skipping.

By default, a MariaDB installation has an anonymous user, allowing anyone
to log into MariaDB without having to have a user account created for
them.  This is intended only for testing, and to make the installation
go a bit smoother.  You should remove them before moving into a
production environment.

Remove anonymous users? [Y/n] y
 ... Success!

Normally, root should only be allowed to connect from 'localhost'.  This
ensures that someone cannot guess at the root password from the network.

Disallow root login remotely? [Y/n] n
 ... skipping.

By default, MariaDB comes with a database named 'test' that anyone can
access.  This is also intended only for testing, and should be removed
before moving into a production environment.

Remove test database and access to it? [Y/n] y
 - Dropping test database...
 ... Success!
 - Removing privileges on test database...
 ... Success!

Reloading the privilege tables will ensure that all changes made so far
will take effect immediately.

Reload privilege tables now? [Y/n] y
 ... Success!

Cleaning up...

All done!  If you've completed all of the above steps, your MariaDB
installation should now be secure.

Thanks for using MariaDB!

If you are still having problems connecting with WordPress and prompting Access denied for user 'root'@'127.0.0.1', try this in mysql -u root -p:

GRANT ALL PRIVILEGES ON *.* TO root@localhost IDENTIFIED BY 'YOUR_MYSQL_ROOT_PASSWORD' WITH GRANT OPTION;
GRANT ALL PRIVILEGES ON *.* TO root@127.0.0.1 IDENTIFIED BY 'YOUR_MYSQL_ROOT_PASSWORD' WITH GRANT OPTION;

If you are getting permission denied by nginx, you need to make sure your php-fpm and nginx are running on the same user. This is stricter on MacBook Pro M1.

Open /opt/homebrew/etc/php/8.3/php-fpm.d/www.conf and change the user, group and listen to following:

user = your_username
group = staff
listen = 127.0.0.1:9074

Open /opt/homebrew/etc/nginx/nginx.conf and add to first line:

user your_username staff;

This is caused by php-fpm not running properly. Please make sure the PHP runs on correct permissions section.