JuniEmu is an emulator interface designed for ARM 32-bit.

JuniEmu is using Unicorn framework for emulation, Capstone disassembly framework and Python's standard GUI package - Tkinter.

The goal of the project was to visually emulate (single step, breakpoint, memory view\edit) raw ARM binaries (bootloaders, embedded firmware, standalone functions, etc).

• Single steeping and breakpoint support
• Memory view and edit
• Registers view and edit
• Instruction highlighting

help - print help

d <addr> - dump memory to current view windows e.g. d 0x1030

u <addr> - unassemble address or register e.g. u pc, u 0x1030, u 0x1031 (disasm 0x1030 in Thumb mode)

bp <addr> - set breakpoint

bc <addr> - clear breakpoint

bl - list breakpoints

r <register> <value> - change register value e.g. r r0 0x101

rr - print registers

? - calc expression

dump <addr> <range> "PATH" - dump memory range to a file e.g. dump 0x1030 100 "/Users/bob/Desktop/dump.bin"

• How to change program counter register to e.g. 0x1030 (ARM mode) ?

r pc 0x1030

• How to change program counter to e.g. 0x1030 (Thumb mode) ?

To switch into thumb mode provide unaligned address (add 1 to the destination address)

r pc 0x1031

• Not tested with Python 3
• Not fully tested on Windows, MacOS
• Input server will freeze the UI until until receiving bytes from the client

• python TkInter (sudo apt-get install python-tk)
• Capstone https://github.com/aquynh/capstone
• Unicorn https://github.com/unicorn-engine/unicorn