Simplified version of curl written in Go.

1. Supports a limited subset of curl options.
2. Supports some flags that curl does not. Read more about the new stuff.

• Why in the world you need another curl?
• How to install gocurl?
• How to use gocurl?
• New stuff
  • Encrypted ClientHello
  • Custom DNS servers
  • Experimental flags
    • Post-quantum cryptography
  • WebSocket support
• All command-line arguments

Curl is certainly awesome, but sometimes I need to have better control over what's happening on the inside and to be able to debug it. It seemed easier to me to implement the necessary parts of curl in Go.

Also, I'd like to be able to extend it with what fits my specific needs. Unfortunately, curl is a bit too huge for that now.

• Using homebrew:

  brew install ameshkov/tap/gocurl

• From source:

  go install github.com/ameshkov/gocurl@latest

• You can use a Docker image:

  docker run --rm ghcr.io/ameshkov/gocurl --help

• You can get a binary from the releases page.

Use it the same way you use original curl.

• gocurl https://httpbin.agrd.workers.dev/get make a GET request.
• gocurl -d "test" -v https://httpbin.agrd.workers.dev/post make a POST request with test data.
• gocurl -I https://httpbin.agrd.workers.dev/head make a HEAD request.
• gocurl -I --insecure https://expired.badssl.com/ do not verify TLS certificate.
• gocurl -I --http1.1 https://httpbin.agrd.workers.dev/head force use HTTP/1.1.
• gocurl -I --http2 https://httpbin.agrd.workers.dev/head force use HTTP/2.
• gocurl -I --http3 https://httpbin.agrd.workers.dev/head force use HTTP/3.
• gocurl -x socks5://user:pass@host:port https://httpbin.agrd.workers.dev/get use a proxy server.
• gocurl -I --tlsv1.3 https://tls-v1-2.badssl.com:1012/ force use TLS v1.3.
• gocurl -I --connect-to "httpbin.agrd.workers.dev:443:172.67.152.85:443" https://httpbin.agrd.workers.dev/head connect to the specified IP addresses.
• gocurl -I --resolve "httpbin.agrd.workers.dev:443:172.67.152.85" https://httpbin.agrd.workers.dev/head resolve the hostname to the specified IP address. Note, that unlike curl, gocurl ignores port in this option.

Also, you can use some new stuff that is not supported by curl.

• gocurl --json-output https://httpbin.agrd.workers.dev/get write output in machine-readable format (JSON).
• gocurl --tls-split-hello 5:50 https://httpbin.agrd.workers.dev/get split TLS ClientHello in two parts and make a 50ms delay after sending the first part.
• gocurl -v --ech https://crypto.cloudflare.com/cdn-cgi/trace enables support for ECH (Encrypted Client Hello) for the request. More on this below.
• gocurl --dns-servers "tls://dns.google" https://httpbin.agrd.workers.dev/get uses custom DNS-over-TLS server to resolve hostnames. More on this below.
• gocurl --experiment pq https://pq.cloudflareresearch.com/ enables post-quantum cryptography support for the request. More on this below.
• gocurl wss://httpbin.agrd.workers.dev/ws sends a WS upgrade request.
• gocurl -d "test message" wss://httpbin.agrd.workers.dev/ws establishes a WS connection, sends the first message through it and reads the response.

ECH or Encrypted Client Hello is a new standard that allows completely encrypting TLS Client Hello. Currently, the RFC is in the draft stage, but it is already supported by some big names like Cloudflare. gocurl supports ECH and provides several options to use it.

The simple option is just add --ech flag and see what happens:

gocurl -v --ech https://crypto.cloudflare.com/cdn-cgi/trace

In this case, gocurl will try to discover the ECH configuration from DNS records and then use them to establish the connection.

Instead of that, you may choose to supply your own configuration in the same base64-encoded format as used by the SVCB record:

# Send a type=https query and find ech record there.
% dig -t https crypto.cloudflare.com.  short
1 . alpn="http/1.1,h2" ipv4hint=162.159.137.85,162.159.138.85 ech=AEX DQBBvgAgACARWS42g5NmDZo5pIpTWSwHzTwzdRKPdUW732QbyUeyDQAEAAEAAQASY2xvdWRmbGFyZS1lY2guY29tAAA= ipv6hint=2606:4700:7::a29f:8955,2606:4700:7::a29f:8a55

# You can now pass it to gocurl.
gocurl -v \
  --echconfig "AEX DQBBvgAgACARWS42g5NmDZo5pIpTWSwHzTwzdRKPdUW732QbyUeyDQAEAAEAAQASY2xvdWRmbGFyZS1lY2guY29tAAA=" \
  https://crypto.cloudflare.com/cdn-cgi/trace

Interesting thing about ECH is that it may connect even if you use an expired configuration (see HelloRetryRequest in the RFC). It depends on both the server and the client implementation and does not work with Cloudflare at the moment.

Here's what happens under the hood:

1. gocurl resolves crypto.cloudflare.com IP address and connects to it.
2. It sends TLS ClientHello (outer) with encrypted inner ClientHello to that IP address. The ServerName field in the outer ClientHello is set to the one that is encoded in the ECH configuration (in this example it will be cloudflare-ech.com), and in the inner encrypted ClientHello it will be set to crypto.cloudflare.com.

You may want to configure a specific "client-facing" server instead and the way to do that is to use --connect-to. Let's send a request to cloudflare.com and use crypto.cloudflare.com as a client-facing server for that.

gocurl -v \
  --connect-to "cloudflare.com:443:crypto.cloudflare.com:443" \
  --echconfig "AEX DQBBvgAgACARWS42g5NmDZo5pIpTWSwHzTwzdRKPdUW732QbyUeyDQAEAAEAAQASY2xvdWRmbGFyZS1lY2guY29tAAA=" \
  https://cloudflare.com/cdn-cgi/trace

For this command to work you may need to replace --echconfig with the current one discovered using DNS as was explained before.

Here's what happens now:

1. gocurl connects to crypto.cloudflare.com (client-facing relay).
2. Sends a TLS ClientHello with cloudflare-ech.com in the Server Name extension.
3. Establishes a TLS connection with cloudflare.com using the inner encrypted ClientHello.

gocurl allows using custom DNS servers to resolve hostnames when making requests. This can be achieved by using --dns-servers command-line argument. curl with c-ares also supports this command-line argument, but gocurl adds encrypted DNS support on top of it, it supports all popular DNS encryption protocols: DNS-over-QUIC, DNS-over-HTTPS, DNS-over-TLS and DNSCrypt.

You can specify multiple DNS servers, in this case gocurl will attempt to use them one by one until it receives a response or until all of them fail:

gocurl \
  --dns-servers "tls://dns.adguard-dns.com,tls://dns.google" \
  https://example.org/

• DNS-over-QUIC

  gocurl --dns-servers "quic://dns.adguard-dns.com" https://example.org/

• DNS-over-HTTPS

  gocurl --dns-servers "https://dns.adguard-dns.com/dns-query" https://example.org/

• DNS-over-TLS

  gocurl --dns-servers "tls://dns.adguard-dns.com" https://example.org/

• DNSCrypt

  gocurl \
      --dns-servers sdns://AQIAAAAAAAAAFDE3Ni4xMDMuMTMwLjEzMDo1NDQzINErR_JS3PLCu_iZEIbq95zkSV2LFsigxDIuUso_OQhzIjIuZG5zY3J5cHQuZGVmYXVsdC5uczEuYWRndWFyZC5jb20 \
      https://example.org/

gocurl provides some initial support for WebSocket protocol. It may be extended in the future, see the corresponding Github issue.

• gocurl wss://httpbin.agrd.workers.dev/ws sends a WS upgrade request.
• gocurl -d "test message" wss://httpbin.agrd.workers.dev/ws establishes a WS connection, sends the first message through it and reads the response.

Experimental flags are added to gocurl whenever there's a feature that may be completely changed or removed in the future. Experiments can be enabled using the --experiment=<name[:value]> argument where name is the experiment name and value is an optional string value (the need for it depends on the actual experiment).

Post-quantum (PQ) cryptography has been designed to be secure against the threat of quantum computers. You can learn more about it from Cloudflare's blog post. gocurl supports it via the --experiment=pq flag.

Note, that it is not available for --http3 at the moment.

gocurl --experiment pq https://pq.cloudflareresearch.com/

Usage:
  gocurl [OPTIONS]

Application Options:
      --url=<URL>                                           URL the request will be made to. Can be specified without any flags.
  -X, --request=<method>                                    HTTP method. GET by default.
  -d, --data=<data>                                         Sends the specified data to the HTTP server using content type
                                                            application/x-www-form-urlencoded.
  -H, --header=                                             Extra header to include in the request. Can be specified multiple times.
  -x, --proxy=[protocol://username:password@]host[:port]    Use the specified proxy. The proxy string can be specified with a
                                                            protocol:// prefix.
      --connect-to=<HOST1:PORT1:HOST2:PORT2>                For a request to the given HOST1:PORT1 pair, connect to HOST2:PORT2
                                                            instead. Can be specified multiple times.
  -I, --head                                                Fetch the headers only.
  -k, --insecure                                            Disables TLS verification of the connection.
      --tlsv1.3                                             Forces gocurl to use TLS v1.3 or newer.
      --tlsv1.2                                             Forces gocurl to use TLS v1.2 or newer.
      --tls-max=<VERSION>                                   (TLS) VERSION defines maximum supported TLS version. Can be 1.2 or 1.3.
                                                            The minimum acceptable version is set by tlsv1.2 or tlsv1.3.
      --ciphers=<space-separated list of ciphers>           Specifies which ciphers to use in the connection, see
                                                            https://go.dev/src/crypto/tls/cipher_suites.go for the full list of
                                                            available ciphers.
      --tls-servername=<HOSTNAME>                           Specifies the server name that will be sent in TLS ClientHello
      --http1.1                                             Forces gocurl to use HTTP v1.1.
      --http2                                               Forces gocurl to use HTTP v2.
      --http3                                               Forces gocurl to use HTTP v3.
      --ech                                                 Enables ECH support for the request.
      --echconfig=<base64-encoded data>                     ECH configuration to use for this request. Implicitly enables --ech
                                                            when specified.
  -4, --ipv4                                                This option tells gocurl to use IPv4 addresses only when resolving host
                                                            names.
  -6, --ipv6                                                This option tells gocurl to use IPv6 addresses only when resolving host
                                                            names.
      --dns-servers=<DNSADDR1,DNSADDR2>                     DNS servers to use when making the request. Supports encrypted DNS:
                                                            tls://, https://, quic://, sdns://
      --resolve=<[ ]host:port:addr[,addr]...>               Provide a custom address for a specific host. port is ignored by
                                                            gocurl. '*' can be used instead of the host name. Can be specified
                                                            multiple times.
      --tls-split-hello=<CHUNKSIZE:DELAY>                   An option that allows splitting TLS ClientHello in two parts in order
                                                            to avoid common DPI systems detecting TLS. CHUNKSIZE is the size of the
                                                            first bytes before ClientHello is split, DELAY is delay in milliseconds
                                                            before sending the second part.
      --json-output                                         Makes gocurl write machine-readable output in JSON format.
  -o, --output=<file>                                       Defines where to write the received data. If not set, gocurl will write
                                                            everything to stdout.
      --experiment=<name[:value]>                           Allows enabling experimental options. See the documentation for
                                                            available options. Can be specified multiple times.
  -v, --verbose                                             Verbose output (optional).

Help Options:
  -h, --help                                                Show this help message