⚠️ This project has been archived and is no longer maintained.
A Lightweight VPN Built on top of IPFS & Libp2p for Truly Distributed Networks.
demo.mp4
Libp2p is a networking library created by Protocol Labs that allows nodes to discover each other using a Distributed Hash Table. Paired with NAT hole punching this allows Hyprspace to create a direct encrypted tunnel between two nodes even if they're both behind firewalls.
Moreover! Each node doesn't even need to know the other's ip address prior to starting up the connection. This makes Hyprspace perfect for devices that frequently migrate between locations but still require a constant virtual ip address.
WireGuard is an amazing VPN written by Jason A. Donenfeld. If you haven't already, definitely go check it out! WireGuard actually inspired me to write Hyprspace. That said, although WireGuard is in a class of its own as a great VPN, it requires at least one of your nodes to have a public IP address. In this mode, as long as one of your nodes is publicly accessible, it can be used as a central relay to reach the other nodes in the network. However, this means that all of the traffic for your entire system is going through that one system which can slow down your network and make it fragile in the case that node goes down and you lose the whole network. So instead say that you want each node to be able to directly connect to each other as they do in Hyprspace. Unfortunately through WireGuard this would require every node to be publicly addressable which means manual port forwarding and no travelling nodes.
By contrast Hyprspace allows all of your nodes to connect directly to each other creating a strong reliable network even if they're all behind their own NATs/firewalls. No manual port forwarding required!
I use this system when travelling, if I'm staying in a rental or hotel and want to try something out on a Raspberry Pi I can plug the Pi into the location's router or ethernet port and then just ssh into the system using the same-old internal Hyprspace ip address without having to worry about their NAT or local firewall. Furthermore, if I'm connected to the Virtual Hyprspace Network I can ssh into my machines at home without requiring me to set up any sort of port forwarding.
Honestly, I even use this system when I'm at home and could connect directly to my local infrastructure. Using Hyprspace however, I don't have to trust the security of my local network and Hyprspace will intelligently connect to my machines using their local ip addresses for maximum speed.
If anyone else has some use cases please add them! Pull requests welcome!
❗ | Hyprspace is still a very new project. Although we've tested the code locally for security, it hasn't been audited by a third party yet. We probably wouldn't trust it yet in high security environments. |
---|
If you're running Hyprspace on Windows you'll need to install tap-windows.
- Go to Hyprspace Releases (over there -->)
- Copy the link for your corresponding OS and Architecture.
- Run
sudo mkdir -p /usr/local/bin/
- Run
sudo curl -L "PATH-TO-RELEASE" -o /usr/local/bin/hyprspace
- Run
sudo chmod a x /usr/local/bin/hyprspace
- (Optional) Run
sudo ln -s /usr/local/bin/hyprspace /usr/bin/hyprspace
Command | Alias | Description |
---|---|---|
help |
? |
Get help with a specific subcommand. |
init |
i |
Initialize an interface's configuration. |
up |
up |
Create and Bring Up a Hyprspace Interface |
down |
d |
Bring Down and Delete A Hyprspace Interface |
update |
upd |
Have Hyprspace update its own binary to the latest release. |
Flag | Alias | Description |
---|---|---|
--config |
-c |
Specify the path to a hyprspace config for an interface. |
The first thing we'll want to do once we've got Hyprspace installed is
initialize the configuration for an interface. In this case we'll call the
interface on our local machine hs0
(for hypr-space 0) and hs1
on our remote server
but yours could be anything you'd like.
(Note: if you're using a Mac you'll have to use the interface name utun[0-9]
. Check which interfaces are already in use by running ip a
once you've got iproute2mac
installed.)
(Note: if you're using Windows you'll have to use the interface name as seen in Control Panel. IP address will be set automatically only if you run Hyprspace as Administrator.)
sudo hyprspace init hs0
sudo hyprspace init hs1
Now that we've got a set of configurations we'll want to
tell the machines about each other. By default Hyprspace will
put the interface configurations in /etc/hyprspace/interface-name.yaml
.
So for our example we'll run
sudo nano /etc/hyprspace/hs0.yaml
and
sudo nano /etc/hyprspace/hs1.yaml
Now in each config we'll add the other machine's ID as a peer. You can find each machine's ID at the top of their configuration file. Update,
peers: {}
to
peers:
10.1.1.2:
id: YOUR-OTHER-PEER-ID
Notice here we'll have to pick one of our machines to be 10.1.1.1
and the other to be 10.1.1.2
. Make sure to update the interface's IP
address for the machine who needs to change to be 10.1.1.2
.
Now that we've got our configs all sorted we can start up the two interfaces!
sudo hyprspace up hs0
and
sudo hyprspace up hs1
After a few seconds you should see a the network finish setting up and find your other machine. We can now test the connection by pinging back and forth across the network.
ping 10.1.1.2
Now to stop the interface and clean up the system you can run,
sudo hyprspace down hs0
and,
sudo hyprspace down hs1
WireGuard is a registered trademark of Jason A. Donenfeld.
Copyright 2021-2022 Alec Scott [email protected]
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.