I am a mechanical engineer, I am starting this github account to publish the "source code" of my OpenERV.org project, to make an open source energy recovery ventilator. The source code includes CAD files, usually in Fusion 360 format, Sketchup and hopefully in the future FreeCAD, as well as documentation on the printing and assembly process, and also the firmware for the microcontroller, of course. Currently I work in Micropython using a Raspberry Pi Pico.
Popular repositories Loading
-
-
half-finished-micropython-raspberry-pi-pico-tmc2209-stepper-driver
half-finished-micropython-raspberry-pi-pico-tmc2209-stepper-driver PublicThis appears to be able to read, but not write registers. The counter that indicates a register was written increments, but when you read it back it's unchanged. It's possible my board was borked o…
Python 3
-
Open__auto_cat_feeder_v4
Open__auto_cat_feeder_v4 PublicOpen Source Automatic Cat feeder Pico W Micropython firmware
Python 1
-
SimpleFOC-based-sensorless-driver-for-G-431-B-ESC1-board
SimpleFOC-based-sensorless-driver-for-G-431-B-ESC1-board PublicThis is a repository to produce a silent motor driver using the simpleFOC libraries on a B-G431-b-ESC1 board. It accepts speed commands by PWM, in the standard way for a reversible fan (50% duty is…
-
-
Something went wrong, please refresh the page to try again.
If the problem persists, check the GitHub status page or contact support.
If the problem persists, check the GitHub status page or contact support.