Voxel Core is an open-source plugin with the Core module of Voxel Plugin. It's essentially a layer on top Unreal to make it easier to write high-performance code & customize the editor. Unlike what the name might imply, there's barely any voxel-specific code included here - all of that lives in the other Voxel Plugin modules.
This plugin is intented to be used in C : if your project is blueprint-only, this will be of no use to you.
If you have questions or suggestions about the code, feel free to ask in #cpp in the plugin's Discord: discord.voxelplugin.com
Voxel Core currently compiles on 5.4. Check branches for older engine versions.
Download this repo, put it in the Plugins folder of your project. You can then add the VoxelCore dependency (or VoxelCoreEditor for editor features) to your module.
For runtime features, use #include "VoxelMinimal.h".
For editor features, use #include "VoxelEditorMinimal.h".
If you have a custom PCH, you should add these includes to it.
VoxelCore uses its own assertion macros (checkVoxelSlow etc).
This allows disabling them in Development Editor builds, which is important for performance-heavy editor features to be fast.
You can change this behavior in VoxelCore.Build.cs.
A variety of high-performance containers are included:
TVoxelAddOnlySetTVoxelArrayTVoxelArrayViewTVoxelBitArrayTVoxelChunkedArrayTVoxelMapTVoxelSparseArrayTVoxelChunkedSparseArrayTVoxelStaticArrayTVoxelStaticBitArray
Some of them, like TVoxelArray, are mainly there to disable range checking when VOXEL_DEBUG is 0.
Others, like TVoxelMap, are full replacement of engine containers to be faster.
Here's a few benchmarks in a shipping build with checks disabled (see FVoxelCoreBenchmark::Run()), comparing voxel containers against engine ones.
Map::FindChecked 1.2x faster Engine: 1.39ns Voxel: 1.21ns std: 5% 7%
Map::Remove 1.2x faster Engine: 13.98ns Voxel: 11.6ns std: 4% 4%
Map::Reserve(1M) 66.6x faster Engine: 1.22ms Voxel: 18.32us std: 5% 14%
Map::FindOrAdd 2.2x faster Engine: 1.99ns Voxel: 0.89ns std: 8% 5%
Map::FindOrAdd<FIntVector> 5.9x faster Engine: 8.82ns Voxel: 1.5ns std: 12% 4%
Map::Add_CheckNew 4.5x faster Engine: 9.5ns Voxel: 2.12ns std: 22% 2%
SparseArray::Reserve(1M) 2.5x faster Engine: 1.09ms Voxel: 443.1us std: 54% 5%
SparseArray::Add 1.4x faster Engine: 2.99ns Voxel: 2.11ns std: 8% 14%
BitArray::Add 2.1x faster Engine: 3.02ns Voxel: 1.45ns std: 14% 17%
BitArray::CountSetBits 9.1x faster Engine: 56.56us Voxel: 6.25us std: 3% 16%
ConstSetBitIterator 3.4x faster Engine: 1.03ms Voxel: 306.48us std: 6% 5%
Array::RemoveAtSwap 3.2x faster Engine: 2.06ns Voxel: 0.65ns std: 15% 6%
AActor::StaticClass 2.9x faster Engine: 1.25ns Voxel: 0.43ns std: 3% 4%You can use VOXEL_MESSAGE to log a message from any thread.
The message will be displayed in the editor as a notification & will be logged.
A lot of types can be directly printed by default (strings, names, all numetic types etc) without having to use printf specifiers.
You can override the behavior of your own types by adding a TSharedRef<FVoxelMessageToken> CreateMessageToken() const; function to them or defining a new TVoxelMessageTokenFactory.
Calling VOXEL_MESSAGE inside a UFunction call will automatically append the blueprint callstack to it.
// This will print "Actor: NameA is not the same as NameB. NameA should be NameB"
// Actor will be clickable and will take you to the relevant actor
VOXEL_MESSAGE(Error, "{0}: {1} is not the same as {2}. {1} should be {2}",
MyActor,
MyActor->GetName(),
MyActor->NameOverride);
int32 Int = 0;
float Float = 0;
FString String = "String";
FName Name = "Name";
UObject* Object = nullptr;
TArray<int32> Array = { 0, 1, 2, 3 };
// VOXEL_MESSAGE can accept a lot of different types by default, including objects & arrays
VOXEL_MESSAGE(Info, "Test: {0} {1} {2} {3} {4} {5} {6}",
Int,
Float,
String,
Name,
Object,
Array);By inheriting from FVoxelVirtualStruct, you can add runtime type information to a struct.
This is especially useful to build thread-safe systems using UStructs instead of UObjects.
FVoxelVirtualStruct supports Cast, TSharedFromThis and many other features.
USTRUCT()
struct FVoxelMessageToken
: public FVoxelVirtualStruct
, public TSharedFromThis<FVoxelMessageToken>
{
GENERATED_BODY()
GENERATED_VIRTUAL_STRUCT_BODY()
};
USTRUCT()
struct FVoxelMessageToken_Group : public FVoxelMessageToken
{
GENERATED_BODY()
GENERATED_VIRTUAL_STRUCT_BODY()
};
void AddGroup(const TSharedPtr<FVoxelMessageToken>& Token)
{
// Cast work on TSharedPtr
// You can also manually check IsA<FVoxelMessageToken_Group>, or call Token->As<FVoxelMessageToken_Group>
const TSharedPtr<FVoxelMessageToken_Group> Group = Cast<FVoxelMessageToken_Group>(Token);
if (!Group)
{
return;
}
Group->DoSmthg();
}
UScriptStruct* Struct = FVoxelMessageToken_Group::StaticStruct();
// You can make shared structs from their UStruct*, in a similar fashion as NewObject
const TSharedRef<FVoxelMessageToken> Token = MakeSharedStruct<FVoxelMessageToken>(Struct)
CastChecked<FVoxelMessageToken_Group>(Token)->DoSmthg();To customize a class, simply add the code below in any .cpp file. No need to bother registering customization globally - it's all automatically done by the macro.
VOXEL_CUSTOMIZE_CLASS(AVoxelActor)(IDetailLayoutBuilder& DetailLayout)
{
const TSharedRef<IPropertyHandle> GraphHandle = DetailLayout.GetProperty(GET_MEMBER_NAME_STATIC(AVoxelActor, Graph_NewProperty));
GraphHandle->MarkHiddenByCustomization();
}For structs, use VOXEL_CUSTOMIZE_STRUCT_HEADER.
You can also use DEFINE_VOXEL_STRUCT_LAYOUT or DEFINE_VOXEL_STRUCT_LAYOUT_RECURSIVE if you wish to have a complex customization.
The following defines a custom thumbnail for asset UVoxelVoxelizedMeshAsset, by rendering its Mesh.
UCLASS()
class UVoxelVoxelizedMeshAssetThumbnailRenderer : public UVoxelStaticMeshThumbnailRenderer
{
GENERATED_BODY()
public:
virtual UStaticMesh* GetStaticMesh(UObject* Object, TArray<UMaterialInterface*>& OutMaterialOverrides) const override
{
return CastChecked<UVoxelVoxelizedMeshAsset>(Object)->Mesh.LoadSynchronous();
}
};
// In cpp
DEFINE_VOXEL_THUMBNAIL_RENDERER(UVoxelVoxelizedMeshAssetThumbnailRenderer, UVoxelVoxelizedMeshAsset);To define a new asset type, you can simply do the following:
// VoxelAssetType will automatically register the asset type actions
// You can customize the thumbnail color using AssetColor
UCLASS(meta = (VoxelAssetType, AssetColor=Blue))
class UVoxelAsset : public UObject
{
GENERATED_BODY()
};
// In cpp, will add the asset to the Voxel category of the content browser context menu
// This automatically defines a new UFactory for that asset
DEFINE_VOXEL_FACTORY(UVoxelAsset);To create a custom toolkit for an asset (ie, to open a custom window when you open an asset), you can use FVoxelSimpleAssetToolkit:
USTRUCT()
struct FVoxelVoxelizedMeshAssetToolkit : public FVoxelSimpleAssetToolkit
{
GENERATED_BODY()
GENERATED_VIRTUAL_STRUCT_BODY()
UPROPERTY()
TObjectPtr<UVoxelVoxelizedMeshAsset> Asset;
public:
//~ Begin FVoxelSimpleAssetToolkit Interface
virtual void Tick() override;
virtual void SetupPreview() override;
//~ End FVoxelSimpleAssetToolkit Interface
private:
UPROPERTY()
TObjectPtr<AStaticMeshActor> Actor;
};This will automatically define a new toolkit for UVoxelVoxelizedMeshAsset.
SimpleAssetToolkit comes with a detail panel and a preview scene.
You can setup the preview scene in SetupPreview, typically by spawning actors into it:
void FVoxelVoxelizedMeshAssetToolkit::SetupPreview()
{
VOXEL_FUNCTION_COUNTER();
Super::SetupPreview();
Actor = SpawnActor<AStaticMeshActor>();
Actor->SetStatucMesh(Asset->Mesh);
UVoxelInvokerComponent* Component = CreateComponent<UVoxelInvokerComponent>();
Component->Radius = 10000;
}A collection of QoL macros used to record trace data for Insights, similar to TRACE_CPUPROFILER_EVENT_SCOPE.
They are all pretty much free if tracing of the voxel channel is not enabled through -trace=voxel or voxel.StartInsights.
void MyFunction()
{
// Will show up as MyClass::MyFunction in Insights
VOXEL_FUNCTION_COUNTER();
{
// Will show up as MyClass::MyFunction.DoWork1 in Insights
VOXEL_SCOPE_COUNTER("DoWork1");
for (int32 Index : Indices)
{
DoWork1(Index);
}
}
{
// Cheaper than a Printf
VOXEL_SCOPE_COUNTER_FNAME(Actor->GetFName());
Actor->Destroy();
}
{
// Will have 1-2us of overhead when tracing due to the Printf, use sparingly
VOXEL_SCOPE_COUNTER_FORMAT("Iterate Num=%d", Indices.Num());
for (int32& Index : Indices)
{
Index ;
}
}
}Automatically track the amount of memory used by instances of a class:
// Will show up in stat voxelmemory, otherwise use the WITH_CATEGORY variant
DECLARE_VOXEL_MEMORY_STAT(MY_API, STAT_MyStructMemory, "MyStruct Memory");
// in .cpp
DEFINE_VOXEL_MEMORY_STAT(STAT_MyStructMemory);
struct FMyStruct
{
TArray<int32> LargeArray;
VOXEL_ALLOCATED_SIZE_TRACKER(STAT_MyStructMemory);
int64 GetAllocatedSize() const
{
return LargeArray.GetAllocatedSize();
}
};
void MyFunction()
{
FMyStruct MyStruct = MakeMyStruct();
// Call GetAllocatedSize and update stats accordingly
MyStruct.UpdateStats();
}Track the number of instances of a class:
struct FMyStruct
{
// Extremely cheap (atomic add on construct, atomic sub on destroy)
VOXEL_COUNT_INSTANCES()
};
// in .cpp, will show up in stat voxelcounters
DEFINE_VOXEL_INSTANCE_COUNTER(FMyStruct);STATIC_FNAME("MyName") will cache a FName into a static variable.
if (Name == STATIC_FNAME("MyActor"))
{
return;
}Create a local scope for easier flow management. Since we don't store the lambda in any TFunction, this is usually completely optimized out & close to zero overhead. This is especially useful when you want strong const-correctness.
const int32 MyValue = INLINE_LAMBDA
{
if (bCondition0)
{
return 0;
}
if (bCondition1)
{
return 1;
}
int32 Result = 0;
for (int32 Index : Indices)
{
Result = Index;
}
return Result;
};Easily declare a console variable & access it through a global.
// in cpp
VOXEL_CONSOLE_VARIABLE(
VOXELGRAPHCORE_API, int32, GVoxelNumThreads, 2, // API Type Name Default
"voxel.NumThreads", // Name
"The number of threads to use to process voxel tasks"); // Description
// Optional, in header
extern VOXELGRAPHCORE_API int32 GVoxelNumThreads;
// In code
if (GVoxelNumThreads > 4)
{
return;
}Easily declare a new console command.
Use VOXEL_CONSOLE_WORLD_COMMAND if you need a UWorld.
VOXEL_CONSOLE_COMMAND(
LogAllBrushes, // Unique name, doesn't really matter
"voxel.LogAllBrushes", // Command
"Log all brushes") // Description
{
// Code goes here
GVoxelChannelManager->LogAllBrushes_GameThread();
}Similar to PURE_VIRTUAL, but easier to use:
virtual void NoReturn() const VOXEL_PURE_VIRTUAL();
virtual uint32 WithReturn() const VOXEL_PURE_VIRTUAL({});Run code on app startup. See VOXEL_RUN_ON_STARTUP_GAME, VOXEL_RUN_ON_STARTUP_EDITOR and VOXEL_RUN_ON_STARTUP_EDITOR_COMMANDLET.
VOXEL_RUN_ON_STARTUP_GAME()
{
// Initialize something
}"type safe" reinterpret_cast: will check that the type size is the same. Useful to ensure some amount of type safety when using reinterpret_cast.
bool bValue = true;
check(ReinterpretCastRef<uint8>(bValue) == 1);Easily const-cast anything:
const int32* Ptr;
ConstCast(Ptr); // Will be int32*
const int32& Ref;
ConstCast(Ref); // Will be int32&
TSharedPtr<const int32> SharedPtr;
ConstCast(SharedPtr); // Will be TSharedPtr<int32>&For-loop for macros:
#define GET_TYPES_IMPL(Value) , decltype(Value)
#define GET_TYPES(...) \
VOXEL_FOREACH(GET_TYPES_IMPL, ##__VA_ARGS__)
GET_TYPES(A, B, C, D) // will expand to , decltype(A), decltype(B), decltype(C), decltype(D)Easily create global ticking singletons. Do prefer subsystems to this for gameplay features - mainly useful for backends.
class FVoxelMaterialManager : public FVoxelSingleton
{
public:
virtual void Initialize() override;
virtual void Tick() override;
virtual void Tick_Async() override; // Tick called as a background task for convenience
virtual void AddReferencedObjects(FReferenceCollector& Collector) override;
};
extern FVoxelMaterialManager* GVoxelMaterialManager;
// In cpp
FVoxelMaterialManager* GVoxelMaterialManager = new FVoxelMaterialManager();
// In code
GVoxelMaterialManager->DoSomething();Thread-safe world subsystems, can be accessed from any thread & created on demand. If you do not need the thread safety aspect, do use UWorldSubsystem instead.
class VOXELGRAPHCORE_API FVoxelWorldChannelManager : public IVoxelWorldSubsystem
{
public:
GENERATED_VOXEL_WORLD_SUBSYSTEM_BODY(FVoxelWorldChannelManager);
virtual void Tick() override;
};
// In code, from any thread
FObjectKey MyWorld;
const TSharedRef<FVoxelWorldChannelManager> ChannelManager = FVoxelWorldChannelManager::Get(MyWorld);FVoxelZipReader and FVoxelZipWriter are easy-to-use zip wrappers.