Everything Sildr and technical.
1.0 and 2.0 are legacy, and some relevant documentation can be found in /legacy. Keep in mind it's mostly in Norwegian.
Components:
https://no.mouser.com/OrderHistory/OrdersView.aspx
Email: [email protected]
Username: vidundergunder
Password: ******
PCB:
https://jlcpcb.com/order#EL
Email: [email protected]
Username: vidundergunder
Password: ******
The system is split in two parts:
- Base system
- Optional data logging system (requires the base system)
Image may be outdated
- Behavior can be controlled with an MCU, and has an analog fallback
- Relay represents the solenoid valve
- Voltmeter is a digital in pin, registering 0V as button presses
- Logic sources are digital out pins
- Resistor connected to pin 7 and 6 on the 555-timer can be changed out for a potentiometer to manually set timer on-site
Image may be outdated
- Simulation requires an Autodesk account (you can use your google account)
- Lightbulb represents the solenoid valve
- 1x 555-timer
- 3x nMOS Transistor (MOSFET)
(FQP30N06L 60V LOGIC N-Channel MOSFET) - 3x 1k resistor
- 1x 4k7 resistor
- 1x 330 resistor
- 1x 1mF capacitor
- 1x Pushbutton
- 1x diode
- 12V DC power supply
- 5V DC power supply
| Component | Description | Image |
|---|---|---|
| Button | Schurter Touchless Switch TTS |  |
| Solenoid Coil (Valve) | Danfoss BE012DS Coil |  |
| Transformer | 230VAC to 12VDC 2.0A (NB: Pick correct option) |  |
TODO
| Component | Description | Image |
|---|---|---|
| Flowmeter | Sensus HRI Pulsgiver (1pulse/liter) Datasheet |  |