Skip to content

Topolograph.com is an online project which can visualize OSPF/ISIS topology based on LSDB output from a single network device. Then you can not only see (and check) the shortest path from source to destination, but also see the outcome from link or node failure along the path to the destination.

License

Notifications You must be signed in to change notification settings

Vadims06/topolograph

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Topolograph

Topolograph.com is a Web Python-based tool, which is aimed at visualizing OSPF/ISIS topology and working with the OSPF/ISIS network offline! No any logins and passwords! The Topolograph visualizes OSPF/ISIS network topology based on LinkState DataBase scrapped from a single network device ( thanks OSPF/ISIS =). You can upload a txt file or boot up docker's version of Topolograph on your PC and the Topolograph takes OSPF via NAPALM's methods by itself. Then you can build the shortest path from a source to a destination, get backup paths, emulate link outage along the path or change OSPF/ISIS link cost on the fly! Additionally, you can simulate a device outage and see appropriate network reaction. Build reports about the network.
Once you upload your OSPF/ISIS to Topolograph - you save the state of your network. After any changes on a network (i.e. redistribution from BGP to OSPF via route-maps with prefix-lists) - upload the network once again and compare them between each other.

Real-Time monitoring

Watcher agent for real-time monitoring of changes happened in OSPF/IS-IS domain

Available option

  • Do not require any logins and passwords - accept LSDB from txt file or via Rest API
  • Docker version is available. Launch local copy of Topolograph site on your PC
  • Once you get your network graph - build the shortests paths
  • Simulate a link outage and discover backup paths or backup of backup paths...
  • Simulate a router shutdown. Look at traffic flow around the failed router
  • Find the most loaded nodes and edges, fault tolerant nodes.
  • Check network reaction to IGP cost change on a link
  • Compare the network state at different times
  • Discover backuped/not-backuped networks in Analytics/Network heatmap
  • Discover asymmetric paths
  • Build arbitrary topologies based on YAML. Yaml file topology visualization.

Supported vendors for OSPF visualization

Vendor LSA1 LSA2 LSA5 NAPALM support
Cisco show ip ospf database router show ip ospf database network show ip ospf database external YES
Cisco NX-OS show ip ospf database router detail show ip ospf database network detail show ip ospf database external detail No
Quagga show ip ospf database router show ip ospf database network show ip ospf database external YES
Ruckus show ip ospf database link-state router show ip ospf database link-state network show ip ospf database external-link-state No
Juniper show ospf database router extensive | no-more show ospf database network extensive | no-more show ospf database external extensive | no-more YES
Bird show ospf state all show ospf state all show ospf state all No
Nokia show router ospf database type router detail show router ospf database type network detail show router ospf database type external detail Yes
Mikrotik /routing ospf lsa print detail file=lsa.txt /routing ospf lsa print detail file=lsa.txt /routing ospf lsa print detail file=lsa.txt No
Huawei display ospf lsdb router display ospf lsdb network display ospf lsdb ase No
Paloalto show routing protocol ospf dumplsdb show routing protocol ospf dumplsdb show routing protocol ospf dumplsdb No
Ubiquiti show ip ospf database router show ip ospf database network show ip ospf database external No
Allied Telesis show ip ospf database router show ip ospf database network show ip ospf database external No
Extreme show ospf lsdb detail lstype router show ospf lsdb detail lstype network show ospf lsdb detail lstype as-external No
Ericsson show ospf database router detail show ospf database network detail show ospf database external detail No

LSA 1 and LSA 2 is mandatory and have to exist in the same file. LSA 5 is optional. The output from all commands should be placed in a single file and then be uploaded to Topolograph.

Supported vendors for OSPFv3 visualization

Vendor Command Stub network included External (redistributed) network
Arista show ipv6 ospf database detail YES YES

Supported vendors for ISIS visualization

Vendor Command Stub network included External (redistributed) network
Cisco show isis database detail YES No, (need tested LSDB for adding it)
Juniper show isis database extensive YES, but need tested LSDB for checking it No, (need tested LSDB for adding it)
Nokia show router isis database detail YES, but need tested LSDB for checking it No, (need tested LSDB for adding it)
Huawei display isis lsdb verbose YES, but need tested LSDB for checking it No, (need tested LSDB for adding it)
ZTE show isis database verbose YES, but need tested LSDB for checking it No, (need tested LSDB for adding it)

How to start

  • run commands specifically to your vendor (from Supported vendors table) on single device ( if you have multiple areas - do it on ABR)

  • save all commands output in a single file with .txt or .log extension

  • upload the file to Topolograph

  • or do it programmatically via Rest API. Multi devices LSDBs are supported via API only (v2.34).

Expected file's extension

  • .txt
  • .log

Demo

Upload OSPF LSDB to the Topolograph and Building the shortest paths

This demo shows how to get OSPF topology visual and interact with it.

  1. Upload the file to Topolograph from exicuted commands previously.
  2. Build the shortest paths
  3. Emulate a link outage and see backup paths

Network reaction on the link failure. Backup paths

Pressing on edge we simulate the link outage and can see backup paths
pressing on edge we simulate the link outage and can see backup paths and we can see backup of backup paths as well

OSPF cost changes on the fly. OSPF cost planning.

It's feasible to change OSPF cost on any edge and get network reaction on the fly!
Build the shortest path under General View and set new OSPF cost in new pop-up-ed form - new path will be repainted
This pop-uped form is available under NetworkReactionOnFailure and shows network traffic pattern changes!
On the demo below we changed OSPF cost from 1 to 22 and OSPF rebuilt the shortest path via bottom link.

Sum it up, available features under GeneralView Tab:

  • Build the shortest path, right click on a node and set it as a source or destination.
  • Find backup paths, just press on a colored SPT edge and you will simulate link outage. The network reaction will be showed with using different colors.
  • OSPF edge cost planning right click on an edge and you can change edge's OSPF cost you see new path of your SPT.
  • Find termination node of a network start typing a network in Focus/Source tab and you get a dropdown list with all nodes with this network. Once you choose it - you will be focused on the node.

NetworkReactionOnFailure is covered in how-to

It's possible to simulate a link or router shutdown/outage. The topology will be re-pained with expected changed traffic flow avoiding failed link or router.

  • Blue lines show traffic increasing over the link
  • Grey lines show traffic decreasing over the link

Try to shutdown backup router and see the graph reaction. If this is a true backup router - there shoudn't be network rebuilding too much

Reports

Asymmetric paths

When different costs are configured on different links - asymmetric paths could be in the network. The incoming path from W to F is going via C-D, but the outgoing path is via B-A. Paths can go via different ISPs and come with different delays and, probably, losses. The report is aimed at discovering such cases in order to eliminate it.

Network heatmap

The topolograph knows what networks are advertised by nodes. When the network is terminated on both routers, using VRRP, both nodes advertise the network. The node is marked by red if it has a lot of unbackuped networks, and vise versa.

ECMP backup paths

  • We suggest that if we have multiple links bounded to ECMP and if the main link in ECMP goes down, the backup path should go via the second link in ECMP. passed report
    passed report
  • If backup path goes not via ECMP and chooses completely different path - the report will be treated as failed. failed report
    passed report

Private

Keep your network inside your organization. Run your local copy of Topolograph inside your on-premises network using the docker image.

API

Schema

Full schema description is here

Default credentials

Default credentials are available via environment variables in case of using docker-based version. How to set it described in this case.

Details

Started from v2.19. Scrab your LSDB using your favourite tools like Ansible, netmiko, Nornir, etc and upload your OSPF network graph to Topolograph via a POST request. The response returns:

  • diff comparison with previously uploaded graphs
  • link to get all networks
  • status about passed checks (are there are asymmetric links in the network, etc)
{'diff': {'compared_with_graph_time': '08Jun2021_20h15m26s_13_hosts',
          'graphs_diff': {'all_edges_stats_ll': [{'dst_node': '123.123.110.110',
                                                  'link_cost': 10,
                                                  'link_status': 'old',
                                                  'src_node': '123.123.100.100'],
                          'new_nodes': [],
                          'old_nodes': []},
          'networks_diff': {'new_subnets_attr_dd_ll': [{'rid': '123.30.30.30',
                                                        'subnet': '30.30.30.30/32'}],
                            'old_subnets_attr_dd_ll': []}},
 'graph_time': '08Jun2021_20h15m51s_13_hosts',
 'hosts': {'count': 13},
 'networks': {'backuped': 17,
              'count': 39,
              'notbackuped': 22,
              'url_link': 'https://topolograph.com/api/network/08Jun2021_20h15m51s_13_hosts'},
 'reports': {'ansym_edges_pass_status': False},
 'timestamp': '2021-06-08T20:15:51.724000'}

API graph upload

Upload you OSPF network via python. Supposed that you saved commands output into cisco_lsdb_output.txt.

import requests
from pprint import pprint as pp
with open('cisco_lsdb_output.txt') as f:
  lsdb_output = f.read()
  r_post = requests.post('https://topolograph.com/api/graph', auth=('[email protected]', 'your-pass'), 
                          json={'lsdb_output': lsdb_output, 'vendor_device': 'Cisco', 'igp_protocol': 'ospf'})
  pp(r_post.json())

igp_protocol may include ospf or isis

Get the shortest path

It allows to get the shortest path between two OSPF RID, or it also accepts IP address or IP Subnet as source/destination and returns the following:

  • path's cost
  • the shortest path
  • unbackuped parts of the shortest path (if these links go down, we will lose a connectivity between the source and destination).

src_node and dst_node accepts OSPF RID as a value.

r_post = requests.post('https://topolograph.com/api/path', auth=('', ''), 
json={'graph_time': '27Dec2022_22h46m01s_7_hosts_ospfwatcher', 'src_node': '192.168.100.100', 'dst_node': '10.1.123.23'})  

Reply

r_post.json()
{'cost': 30, 
'spt_path_nodes_name_as_ll_in_ll': [['192.168.100.100', '10.1.1.4', '10.1.1.2', '10.1.123.23']], 
'unbackup_paths_nodes_name_as_ll_in_ll': [['192.168.100.100', '10.1.1.4']]}

A '192.168.100.100' - '10.1.1.4' link is shown as nonbackuped
The visual path

Get backup path

removedEdgesAsNodePairsFromSptPath_ll_in_ll accepts a list of edges which will be treated as down links

r_post = requests.post('https://topolograph.com/api/path', auth=('', ''), 
json={'graph_time': '27Dec2022_22h46m01s_7_hosts_ospfwatcher', 'src_node': '192.168.100.100', 'dst_node': '10.1.123.23', 
'removedEdgesAsNodePairsFromSptPath_ll_in_ll': [['10.1.1.4', '10.1.1.2']]})    
r_post.json()
{'cost': 40, 
'spt_path_nodes_name_as_ll_in_ll': [['192.168.100.100', '10.1.1.4', '10.1.1.3', '10.1.1.2', '10.1.123.23']], 
'unbackup_paths_nodes_name_as_ll_in_ll': [['192.168.100.100', '10.1.1.4']]}

The visual path

get the shortest path for networks

There is a separate method for getting the shortest path, which accepts IP addresses/IP network as an input.
Let's build a path between 192.1.113.99 IP and 192.1.213.0/24 network.

r_post = requests.post('https://topolograph.com/api/path/network', auth=('', ''), 
json={'graph_time': '27Dec2022_22h46m01s_7_hosts_ospfwatcher', 'src_ip_or_network': '192.1.113.99', 'dst_ip_or_network': '192.1.213.0/24'})    

Reply

r_post.json()
{'cost': 20, 
'spt_path_nodes_name_as_ll_in_ll': [['10.1.1.1', '10.1.1.4', '10.1.1.2'], ['10.1.1.1', '10.1.1.3', '10.1.1.2']], 
'unbackup_paths_nodes_name_as_ll_in_ll': []}

The visual path

Network reaction on a failure

We have the following topology
image

Test case

Emulate powering off nodes 10.1.1.2 and 10.1.1.4.

What we would like to test

  • Link over utilisation will occurs?
  • Network reachability will be broken? Some nodes will be isolated?
    Test request:
import requests
from pprint import pprint as pp
r_post = requests.post('http://<topolograph-host>/api/network_reaction/node_failure/', auth=('   ', '    '), 
                          json={"graph_time": "25Nov2021_08h20m45s_7_hosts", "failed_nodes_list": ["10.1.1.2", "10.1.1.4"]})
pp(r_post.json())

Reply

{'affectedLinks': {'sptPathsDecreasedInPercent': {},
                   'sptPathsIncreasedInPercent': {'from': '10.1.1.1',
                                                  'to': '10.1.1.3',
                                                  'value': 60}},
 'disjointedNodes': [['10.1.123.23', '10.1.123.24'],
                     ['192.168.100.100'],
                     ['10.1.1.1', '10.1.1.3']],
 'isGraphStillConnected': False}

Yaml based topology

Topolograph visualizes topologies based on OSPF/IS-IS LSDB files, but starting from v2.32 it accepts YAML to build a graph. It can be used for building arbitrary topologies (not exactly IGP domains), but moreover it can keep the topology updated via Rest API. It's the first version of Network Diagram as a Service (NDAS)!
OSPF/IS-IS LSDB <-> YAML is interchangeable now in both ways, so it allows to make a design of IGP domain from the scratch or based on uploaded a LSDB, add new links/edges between nodes or change igp's cost and then check network reaction based on our changes.

Basic YAML based topology.

Build a graph with defined nodes and edges. https://user-images.githubusercontent.com/20796986/144145217-454c1442-ba6c-4337-a6f2-8dde5d337f1e.png

Node attributes

  • node's name is mandatory. Should be in IP-address format. To change it to any other value - use label
  • Tags of node are optional. Any key (type string): value (str, int, float, dictionary, list) pairs. image
    There is a graph with 6 nodes. Select all primary nodes (ha_role: primary) in the first DC (dc1)
import requests
from pprint import pprint as pp
query_params = {'location': 'dc1', 'ha_role': 'primary'}                                  
r_get = requests.get(f'http://{TOPOLOGRAPH_HOST}:{TOPOLOGRAPH_PORT}/api/diagram/{graph_time}/nodes', auth=('   ', '    '), params=query_params, timeout=(5, 30))

Reply

pp(r_get.json())
[{'ha_role': 'primary',
  'id': 1,
  'label': '10.10.10.2',
  'location': 'dc1',
  'name': '10.10.10.2',
  'size': 15}]

Edge attributes

  • src, dst is mandatory.
  • cost is optional. Default is 1. Equal to OSPF/IS-IS cost.
  • directed is optional. Default is false.
  • Tags of edge are optional. Any key (type string): value (str, int, float, dictionary, list) pairs. image
    Select all edges over verizon ISP between 10.10.10.2 and 10.10.10.4
query_params = {'src_node': '10.10.10.2', 'dst_node': '10.10.10.4', 'isp': 'verizon'}
r_get = requests.get(f'http://{TOPOLOGRAPH_HOST}:{TOPOLOGRAPH_PORT}/api/diagram/{graph_time}/edges', auth=('   ', '    '), params=query_params, timeout=(5, 30))

Reply

pp(r_get.json())                                                                          
[{'bw': 1000,
  'cost': 1,
  'dst': '10.10.10.4',
  'id': 3,
  'isp': 'verizon',
  'media': 'fiber',

Network reaction on adding new link between devices.

Let's add a new link with cost 1 between R3 (10.10.10.3) and R4 (10.10.10.4) device and see how network will react on it. image Obviously, we see traffic increase on direct link R3<->R4 and traffic decrease to R2 (10.10.10.2) and R5 (10.10.10.5).

Online Resources. Contacts

Known issues

If you just upload LSDB and press Delete -> topology will be deleted and added again. Just press Upload LSDB Tab again and then deleting of topology works fine.

Contribution.

Adding new feature into core of Topolograph

Email me admin at topolograph.com and can open the access to the repository.

adding new vendor

In order to project supports different vendors you can help us by creating five separate textfsm files for different LSA types for one vendor. Check Wiki for this.

adding NAPALM support

For adding scrapping OSPF by NAPALM - please create three additional methods and ping me to add it to topolograph. The example based on Cisco IOS NAPALM

    def get_ospf_router_lsa_raw_output(self):
        command_router = 'show ip ospf database router'

        show_ospf_lsdb_router_lsa_output = self._send_command(command_router).strip()
        return show_ospf_lsdb_router_lsa_output

    def get_ospf_network_lsa_raw_output(self):
        command_network = 'show ip ospf database network'

        show_ospf_lsdb_network_lsa_output = self._send_command(command_network).strip()
        return show_ospf_lsdb_network_lsa_output


    def get_ospf_external_lsa_raw_output(self):
        command_external = 'show ip ospf database external'

        show_ospf_lsdb_external_lsa_output = self._send_command(command_external).strip()
        return show_ospf_lsdb_external_lsa_output

Used RFC

RFC 2328

About

Topolograph.com is an online project which can visualize OSPF/ISIS topology based on LSDB output from a single network device. Then you can not only see (and check) the shortest path from source to destination, but also see the outcome from link or node failure along the path to the destination.

Topics

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages