official manual, arch mpv page (which i deem to b a must-read)

Dependencies: libsixel, lua52, sndio, unzip

This repository works via Emacs Org-mode tangling, this readme tangles to mpv.conf, input.conf and sources file which contains links to all external scripts i use. Save this file once and those files will be created. Then run ./mpvmanager without an argument to get all scripts downloaded to proper directories. Run ./mpvmanager sync to download only missing (or if you added new scripts to this readme).

External Sources of this config:

• https://wiki.archlinux.org/title/mpv <– READ WHOLE
• https://github.com/hl2guide/better-mpv-config
• https://raw.githubusercontent.com/classicjazz/mpv-config/master/mpv.conf

# DO NOT ALTER! This config is tangled from README

pause=no                               # disables autoplay
border=no              # hides the window title bar
# Sets the profile restore method to "copy if equal"
profile-restore=copy-equal
no-input-builtin-bindings
save-position-on-quit=yes               # saves the seekbar position on exit
force-seekable=yes                      # forces videos to be seekable

vlang=en,eng                            # Sets the video language
# Uses GPU-accelerated video output by default.
# https://github.com/mpv-player/mpv/wiki/GPU-Next-vs-GPU
vo=gpu # gpu-next <- experimental video renderer based on libplacebo
profile=gpu-hq # Can cause performance problems with some GPU drivers and GPUs.
# scale=ewa_lanczossharp
dscale=mitchell

volume-max=100 # maximum volume in %, everything above 100 results in amplification
volume=70      # default volume, 100 = unchanged

display-fps-override=60
video-sync=display-resample
interpolation=yes
tscale=oversample # smoothmotion

blend-subtitles=yes
sub-auto=fuzzy # Enable fuzzy searching:

default keybindings

Use SHARP to assign the # key.

• List of commands and further details: DOCS/man/input.rst
• List of special keys: –input-keylist
• Keybindings testing mode: mpv –input-test –force-window –idle

Use ‘ignore’ to unbind a key fully (e.g. ‘ctrl a ignore’).

Strings need to be quoted and escaped: KEY show-text “This is a single backslash: \ and a quote: " !”

# THIS FILE IS BEING TANGLES FROM README

# If this is enabled, treat all the following bindings as default:
default-bindings start

Note: All key bindings below that are bound to _ are defined as leader ones in my leader script.

# always exact seeks (non-keyframe-limited).
# Don't show them on the OSD (no-osd).
l no-osd seek 10 exact
h no-osd seek -10 exact
RIGHT no-osd seek 5 exact
LEFT no-osd seek -5 exact

[ multiply speed 1/1.1 # decrease the playback speed
] multiply speed 1.1   # increase the playback speed
> multiply speed 2.0   # double the playback speed
< multiply speed 0.5   # halve the playback speed
0 set speed 1.0        # reset the speed to normal

SPACE cycle pause       # toggle pause/playback mode
PLAY cycle pause        # toggle pause/playback mode
PAUSE cycle pause       # toggle pause/playback mode
PLAYPAUSE cycle pause   # toggle pause/playback mode
PLAYONLY set pause no   # unpause
PAUSEONLY set pause yes # pause

j add volume -5
k add volume 5
m cycle mute                           # toggle mute

# Quitting
# q quit
Q quit-watch-later # exit and remember the playback position
# q {encode} quit 4
ESC set fullscreen no                  # leave fullscreen
ESC {encode} quit 4

# toggle displaying information and statistics (https://mpv.io/manual/master/#stats)
i script-binding stats/display-stats-toggle 
` script-binding console/enable        # open the console
Ctrl F cycle fullscreen                     # toggle fullscreen

Alt v cycle video                          # switch video track
# cycle the video aspect ratio ("-1" is the container aspect)
Alt Ctrl v cycle-values video-aspect-override "16:9" "4:3" "2.35:1" "-1"

# take a screenshot of the video in its original resolution without subtitles
Ctrl S screenshot video

H  no-osd sub-seek -1   # seek to the previous subtitle
L  no-osd sub-seek  1   # seek to the next subtitle

get M-x-rofi script https://raw.githubusercontent.com/Seme4eg/mpv-scripts/master/M-x-rofi.lua
get M-x-rofi options https://raw.githubusercontent.com/Seme4eg/mpv-scripts/master/script-opts/M_x_rofi.conf

get leader script https://raw.githubusercontent.com/Seme4eg/mpv-scripts/master/leader.lua
get leader module https://raw.githubusercontent.com/Seme4eg/mpv-scripts/master/script-modules/leader.lua
get leader options https://raw.githubusercontent.com/Seme4eg/mpv-scripts/master/script-opts/leader.conf

get shaders-rofi script https://raw.githubusercontent.com/Seme4eg/mpv-scripts/master/shaders-rofi.lua

get dbvol script https://gist.githubusercontent.com/Artefact2/0a9c87d6d0f0ef6a565e44d830943fff/raw/c841063304a98f99371ce28e0b14ade609e8185c/dbvol.lua

j script-binding dbvol/decrease-db
k script-binding dbvol/increase-db

Fills the black bars on the side of a video with a blurred copy of its edges.

NOTE slows everything down a lot triggers only on fullscreen toggle

get blur_edges script https://raw.githubusercontent.com/occivink/mpv-scripts/master/scripts/blur-edges.lua
get blur_edges options https://raw.githubusercontent.com/occivink/mpv-scripts/master/script-opts/blur_edges.conf

Alt b script-binding blur-edges/toggle-blur

get quack script https://raw.githubusercontent.com/CounterPillow/mpv-quack/master/quack.lua
conf_file=quack.conf
! config_exists quack && echo "ducksecs=1" >"$conf_file"

ctrl r to reload if anything is wrong / stuck

get reload script https://raw.githubusercontent.com/sibwaf/mpv-scripts/master/reload.lua

Ctrl r script-binding reload/reload

get undoredo script https://raw.githubusercontent.com/Eisa01/mpv-scripts/master/scripts/UndoRedo.lua

u script-binding UndoRedo/undo
r script-binding UndoRedo/redo
U script-binding UndoRedo/undoLoop

– This script defines the following keybinds: – – % skip2scene – skip2scene fast forwards to the next scene change – ^ skip2black – skip2black fast forwards to the next black video segment – & skip2silence – skip2silence fast forwards to the next silent audio segment

get lilskippa script https://raw.githubusercontent.com/AN3223/dotfiles/master/.config/mpv/scripts/lilskippa.lua

get thumbfast script https://raw.githubusercontent.com/l-jared/thumbfast/master/thumbfast.lua
get thumbfast options https://raw.githubusercontent.com/l-jared/thumbfast/master/thumbfast.conf

get_uosc() {
    config_dir="${XDG_CONFIG_HOME:-~/.config}"
    mkdir -pv "$config_dir"/mpv/script-opts/
    rm -rf "$config_dir"/mpv/scripts/uosc_shared
    wget -P /tmp/ https://github.com/tomasklaen/uosc/releases/latest/download/uosc.zip
    unzip -od "$config_dir"/mpv/ /tmp/uosc.zip
    rm -fv /tmp/uosc.zip
    get uosc options https://github.com/tomasklaen/uosc/releases/latest/download/uosc.conf
}

if [ $command == sync ]; then
    [ ! -d ./scripts/uosc ] && get_uosc
else
    get_uosc
fi

Config:

# required so that the 2 UIs don't fight each other
osc=no
# uosc provides its own seeking/volume indicators, so you also don't need this
osd-bar=no
# uosc will draw its own window controls if you disable window border
border=no

# uosc respects this setting
# osd-font='Iosevka'

# And these doesn't
# osd-font-size=45
# osd-scale=0.5

get SmartCopyPaste script https://github.com/Eisa01/mpv-scripts/raw/master/scripts/SmartCopyPaste.lua

• SSimDownscaler, SSimSuperRes, Krig, Adaptive Sharpen, etc. -
  • SSimDownscaler: Perceptually based downscaler.
  • SSimSuperRes: make corrections to the image upscaled by mpv built-in scaler.
  • Krig: Chroma scaler that uses luma information for high quality upscaling.
• FidelityFX CAS - AMD FidelityFX Contrast Adaptive Sharpening (CAS) - sharpen and optionally scale an image.
• FidelityFX FSR - AMD FidelityFX Super Resolution is a spatial upscaler.
• NVIDIA Image Scaling - spatial scaling and sharpening algorithm.
• Anime4K

get NVScaler shader https://gist.github.com/agyild/7e8951915b2bf24526a9343d951db214/raw/05f00864228871ffd157daa9beb2db8fa7412cfa/NVScaler.glsl
get NVScaler shader https://gist.github.com/agyild/7e8951915b2bf24526a9343d951db214/raw/05f00864228871ffd157daa9beb2db8fa7412cfa/NVSharpen.glsl
get FSR shader https://gist.github.com/agyild/82219c545228d70c5604f865ce0b0ce5/raw/2623d743b9c23f500ba086f05b385dcb1557e15d/FSR.glsl
get SSimDownscaler shader https://gist.github.com/igv/36508af3ffc84410fe39761d6969be10/raw/575d13567bbe3caa778310bd3b2a4c516c445039/SSimDownscaler.glsl

glsl-shader="~~/shaders/NVScaler.glsl"

[fastforward]
profile-restore=copy-equal
scale=bilinear
dscale=bilinear
cscale=bilinear
vd-lavc-skiploopfilter=all
vd-lavc-skipframe=all

# GIF Files
[extension.gif]
profile-restore=copy-equal # Sets the profile restore method to "copy if equal"
profile-desc=gif
cache=no
no-pause
loop-file=yes

# WebM Files
[extension.webm]
profile-restore=copy-equal # Sets the profile restore method to "copy if equal"
profile-desc=webm
no-pause
loop-file=yes

[protocol.http]
profile-restore=copy-equal # Sets the profile restore method to "copy if equal"
profile-desc=http
hls-bitrate=max # use max quality for HLS streams
cache=yes
no-cache-pause # don't pause when the cache runs low

[protocol.https]
profile-restore=copy-equal # Sets the profile restore method to "copy if equal"
profile-desc=https
profile=protocol.http

[protocol.ytdl]
profile-restore=copy-equal # Sets the profile restore method to "copy if equal"
profile-desc=ytdl
profile=protocol.http

take any script that SIMPLY logs history and pipe it to rofi

script 1, script 2

Example of line format in history.log file (see how it forms here):

[Wednesday/September 06/09/2023 19:17:52] "output.lq.mp4" | https://dl4.vibio.tv/f064277c672d45c35a49426dca2020f7/2839/2839278/output.lq.mp4 | length=5367.4472335601 | time=5367.4100453432

several deps, view installation section in docs

https://github.com/ehoneyse/mpv-open-anilist-page

• Check these config settings for subtitles.
• check this user-script list

either this or this. Former - press to download, latter - automatic also search on scripts page for ‘sub-‘, there are lots of utility scripts for working with subtitles

and yet another script for subtitles

Bind those if ya’ll ever need ‘em:

• Shift g add sub-scale 0.1 # increase the subtitle font size
• Shift f add sub-scale -0.1 # decrease the subtitle font size
• Ctrl Shift LEFT sub-step -1 # change subtitle timing such that the previous subtitle is displayed
• Ctrl Shift RIGHT sub-step 1 # change subtitle timing such that the next subtitle is displayed

copy-subtitle and lang-learner as a must and immersive also for learning rikay-mpv - special for jap yomichampv