Chronicle Bytes

Table of Contents

Introduction

Chronicle Bytes is a comprehensive library dedicated to providing low-level memory access wrappers. It is constructed on the foundations of Chronicle Core, taking advantage of its direct memory and Operating System (OS) system call access.

In essence, Chronicle Bytes serves a similar purpose to Java’s Non-blocking I/O (NIO) ByteBuffer, but with several additional features. The API offers:

Support for 63-bit sizes.
Encoding for UTF-8 and ISO-8859-1 strings.
Thread-safe operations for off-heap memory.
Deterministic resource release through reference counting.
Compression for data types such as stop bit encoding.
Elastic ByteBuffer wrappers that resize as needed.
Direct parsing and writing of text to off-heap bytes.

Supported Data Types

The following table outlines the operations and data types supported by Chronicle Bytes:

Operation	Indexed or Streaming	Binary	Text
Read/Write Binary Primitives	Both	float, double, boolean and unsigned/signed byte, short, 24-bit int, int, long, incompleteLong	double, int, long, char, double with precision
Read/Write Text	Both	8-bit/UTF-8 String with Length or Limit	8-bit/UTF-8 String
Read/Write Other	Streaming	Histogram, Named Enum	BigDecimal, BigInteger, Date/Time/Zone, UUID, Hexadecimal
Data Driven Tests	From Files	No	Yes
CAS (Compare-and-Swap)	Indexed	int, long
Volatile Read/Write	Indexed	byte, short, int, long, float, double
Peek	Both	unsigned byte
Stop Bit Compression	Streaming	int, long, double, float, char
Search	From Start	indexOf String, findByte
addAndGet	Indexed	float, double, int, long
copy	From Start	write, copy
hash	From Start	byteSum, fastHash
BytesMarshallable	Streaming	Nested Data Structures, Expected Types Only.

Explanation of Data Types

Here is an explanation for each operation supported by Chronicle Bytes:

Read/Write Binary Primitives	Reading and writing of primitive data structures stored in binary form
Read/Write Text	Reading and writing of text data
Read/Write Other	Reading and writing of other data types
Data Driven Tests	Refer to Data-Driven Testing
CAS (Compare-and-Swap)	An atomic instruction used in multithreading for synchronization. It compares the contents of a memory location with a given value and, only if they match, updates the contents of that memory location to a new given value
Volatile Read/Write	Refer to Volatile Variables
Peek	An operation that retrieves the value of the bytes without affecting its read position
Stop Bit Compression	Refer to Stop Bit Encoding
Search	Any algorithm that addresses the search problem i.e., retrieving information stored within a data structure
AddAndGet	An operation that atomically adds a given value to the current value
Copy	Transferring data from one structure to another
Hash	Refer to Hash Function
Bytes Marshallable	A serialization function

Creating Bytes Instances

This section provides examples of how to create Bytes instances with different types of underlying data structures.

Creating a Bytes instance which wraps an on heap byte array:

Bytes which wraps an on heap byte[]

Bytes<byte[]> bytes = Bytes.allocateElasticOnHeap();
byte[] underlyingBytes = bytes.underlyingObject();

Creating a Bytes instance which wraps a pre-sized on heap byte array:

Bytes which wraps an on heap byte[] pre-sized

Bytes<byte[]> bytes = Bytes.allocateElasticOnHeap(64);
byte[] underlyingBytes = bytes.underlyingObject();

Creating a Bytes instance which wraps an on heap ByteBuffer:

Bytes which wraps an on heap ByteBuffer

Bytes<ByteBuffer> bytes = Bytes.elasticHeapByteBuffer(64);
ByteBuffer underlyingByteBuffer = bytes.underlyingObject();

Creating a Bytes instance which wraps a direct ByteBuffer:

Bytes which wraps a direct ByteBuffer

Bytes<ByteBuffer> bytes = Bytes.elasticByteBuffer(64);
ByteBuffer underlyingByteBuffer = bytes.underlyingObject();

// The memory can be freed deterministically when it is no longer needed.
bytes.releaseLast();

Creating a Bytes instance which wraps some native memory:

Bytes which wraps some native memory

Bytes bytes = Bytes.allocateElasticDirect(64);
long memoryAddress = bytes.address();

// The memory can be freed when it is no longer needed.
bytes.releaseLast();

Creating a Bytes instance which will wrap some native memory when used:

Bytes which will wrap some native memory when used

Bytes bytes = Bytes.allocateElasticDirect();
// use the bytes

// The memory can be freed when it is no longer needed.
bytes.releaseLast();

Understanding Bytes Capacity, Read/Write Position and Limit

A Bytes buffer provides the following properties:

start: The smallest index in the buffer. This is always '0L' for most implementations. For Memory Mappings it is the offset within the file.
capacity: The maximum possible capacity for the buffer, which is usually 2147483632 (or more) for a Bytes buffer.
realCapacity: The current capacity of the buffer. This value is dynamically extended as required.
readLimit: The maximum index that can be read from.
writeLimit: The maximum index that can be written to.
readPosition: The index from which to read. This value should always be less than writePosition.
writePosition: The index at which to write.

Figure 1. The diagram below illustrates a Bytes buffer with its read/write position markers.

In the illustration above, note that readPosition() should always be less than or equals to writePosition() and greater than or equal to start(). Also, readLimit() should always be less than or equals to writeLimit() and greater than or equal to start().

BytesStore

BytesStore is a block of memory with fixed size into which you can write data and later read. You can create a BytesStore using the bytes in a CharSequence, String, ByteBuffer or another BytesStore.

//Create a BytesStore bs using bytes in a String. This gives you a BytesStore with
//fixed size 18.
BytesStore bs = BytesStore.from("This is an example");

//or
//Create a BytesStore from ByteBuffer
ByteBuffer buf = ByteBuffer.allocate(20);
BytesStore bs2 = BytesStore.wrap(buf);

You can see the buffer cursors of bs.

//Print cursors of bs.
System.out.println("readLimit  "   bs.readLimit());
System.out.println("writeLimit "   bs.writeLimit());
System.out.println("readPosition "   bs.readPosition());
System.out.println("writePosition "   bs.writePosition());
System.out.println("capacity "   bs.capacity());
System.out.println("realCapacity "   bs.realCapacity());
System.out.println("start "   bs.start());

prints

readLimit  18
writeLimit 18
readPosition 0
writePosition 0
capacity 18
realCapacity 18
start 0

You can write into a BytesStore from an offset, however if your data is larger than the capacity of BytesStore, the ByteStore will not extend.

Note	The returned object (BytesStore) is unchecked in terms of memory access, therefore the user code must make every effort not to exceed the underlying memory segment limit. Otherwise, the result is unspecified side effects including silently writing over other memory segments, and crashing the JVM.

//Write String "Another example.." into bs starting from offset 0.
bs.writeUtf8(0,"Another example..");

//Prints out: "�Another example.."
System.out.println( bs.to8bitString());

Bytes versus BytesStore

In contrast to a BytesStore, a Bytes extends if you write data into it which is larger than the realCapacity of the Bytes.

//Create a Bytes with initial capacity 14 and write into it "This is an example" that
//needs 18 bytes.
Bytes<byte[]> bb = Bytes.allocateElasticOnHeap(14);
bb.write("This is an example");

The realCapacity of bb extends to 4096. Now, the cursors of bb Bytes are:

readLimit  18
writeLimit 2147483632
readPosition 0
writePosition 18
capacity 2147483632
realCapacity 4096
start 0

Bytes gives you access to the cursors, thus you can use them to read/write from/into a desired index. In contrast, you cannot use the cursors with a BytesStore.

//Write another data starting from index 5 which needs more bytes therefore bb extends.
bb.writePosition(5);
bb.write("sentence was overwritten from index 5 using writePosition cursor");

//Prints out: "This sentence was overwritten from index 5 using writePosition cursor"
System.out.println(bb.toString());

//Read bb from index 43
bb.readPosition(43);
String st = bb.to8bitString();

//Prints out: "using writePosition cursor"
System.out.println(st);

In contrast to Bytes, BytesStore can be shared safely across threads provided that the referenced data is accessed in a thread-safe manner.

bytesForRead() and bytesForWrite()

The bytesForRead() and bytesForWrite() methods can be used to create Bytes from a section of a BytesStore or a Bytes. The size of the new Bytes depends on the limit and position cursors of the original Object.

Create bytesForRead/Write From BytesStore:
1. When you use bytesForWrite() readLimit and writePosition cursors are set to start.
2. When you use bytesForRead(), readPosition is set to start, and readLimit and writePosition cursors are set to realCapacity.

The new Bytes is not elastic and whether you use bytesForRead() or bytesForWrite() you can read and write from/into the new Bytes using cursors.

//Create a BytesStore bs using bytes in a String.
BytesStore bs = BytesStore.from("This is an example");

//Create a Bytes from bs using bytesForRead().
Bytes bfr = bs.bytesForRead();

//Create a Bytes from bs using bytesForwrite().
Bytes bfw = bs.bytesForWrite();

The cursors of bs:

readLimit  18
writeLimit 18
readPosition 0
writePosition 0
capacity 18
realCapacity 18
start 0

The cursors of bfr:

readLimit  18
writeLimit 18
readPosition 0
writePosition 18
capacity 18
realCapacity 18
start 0

The cursors of bfw:

readLimit  0
writeLimit 18
readPosition 0
writePosition 0
capacity 18
realCapacity 18
start 0

Create bytesForRead/Write from a Bytes:
1. When you use bytesForWrite() writeLimit is set to capacity and the new Bytes is elastic.
2. When you use bytesForRead() readPosition is set to start, and writeLimit is set to realCapacity and the new Bytes is not elastic.

Regardless if bytesForRead() or bytesForWrite() is used, you can both read and write from/into the new Bytes using cursors.

//Create a Bytes bb with default size (256 bytes) and write a text into it.
Bytes<ByteBuffer> bb = Bytes.elasticByteBuffer();
bb.write("This is an example");

//Create a Bytes bfr2 from bb using bytesForRead().
Bytes bfr2 = bb.bytesForRead();

//Create a Bytes bfw2 from bb using bytesForWrite().
Bytes bfw2 = bb.bytesForWrite();

The cursors of bb:

readLimit  18
writeLimit 2147483632
readPosition 0
writePosition 18
capacity 2147483632
realCapacity 256
start 0

The cursors of bfr2:

readLimit  18
writeLimit 256
readPosition 0
writePosition 18
capacity 2147483632
realCapacity 256
start 0

The cursors of bfw2:

readLimit  18
writeLimit 2147483632
readPosition 0
writePosition 18
capacity 2147483632
realCapacity 256
start 0

Flipping Bytes

The standard Java ByteBuffer needs to be flipped to switch between reading and writing.

Bytes holds a read position and a write position allowing you to write and immediately read without flipping.

Note	The writePosition is the readLimit.

Writing to a Hexadecimal dump

Writing to a hexadecimal dump is useful for documenting the format for messages written. We have used the hexadecimal dump here.

Writing primitives as binary and dumping

// only used for documentation
HexDumpBytes bytes = new HexDumpBytes();
bytes.comment("true").writeBoolean(true);
bytes.comment("s8").writeByte((byte) 1);
bytes.comment("u8").writeUnsignedByte(2);
bytes.comment("s16").writeShort((short) 3);
bytes.comment("u16").writeUnsignedShort(4);
bytes.comment("char").writeUnsignedShort('5'); // char
bytes.comment("s24").writeInt24(-6_666_666);
bytes.comment("u24").writeUnsignedInt24(16_666_666);
bytes.comment("s32").writeInt(6);
bytes.comment("u32").writeUnsignedShort(7);
bytes.comment("s64").writeLong(8);
bytes.comment("f32").writeFloat(9);
bytes.comment("f64").writeDouble(10);

System.out.println(bytes.toHexString());

prints

59                                              # true
01                                              # s8
02                                              # u8
03 00                                           # s16
04 00                                           # u16
35                                              # char
56 46 9a                                        # s24
2a 50 fe                                        # u24
06 00 00 00                                     # s32
07 00 00 00                                     # u32
08 00 00 00 00 00 00 00                         # s64
00 00 10 41                                     # f32
00 00 00 00 00 00 24 40                         # f64

to read this data you can use

Reading the primitive values above

boolean flag = bytes.readBoolean();
byte s8 = bytes.readByte();
int u8 = bytes.readUnsignedByte();
short s16 = bytes.readShort();
int u16 = bytes.readUnsignedShort();
char ch = bytes.readStopBitChar();
int s24 = bytes.readInt24();
long u24 = bytes.readUnsignedInt24();
int s32 = bytes.readInt();
long u32 = bytes.readUnsignedInt();
long s64 = bytes.readLong();
float f32 = bytes.readFloat();
double f64 = bytes.readDouble();

Writing and reading using offsets

Instead of streaming the data, sometimes you need to control the placement of data, possibly at random.

Write and read primitive by offset

Bytes<ByteBuffer> bytes = Bytes.elasticHeapByteBuffer(64);
bytes.writeBoolean(0, true);
bytes.writeByte(1, (byte) 1);
bytes.writeUnsignedByte(2, 2);
bytes.writeShort(3, (short) 3);
bytes.writeUnsignedShort(5, 4);
bytes.writeInt(7, 6);
bytes.writeUnsignedInt(11, 7);
bytes.writeLong(15, 8);
bytes.writeFloat(23, 9);
bytes.writeDouble(27, 10);
bytes.writePosition(35);

System.out.println(bytes.toHexString());

boolean flag = bytes.readBoolean(0);
byte s8 = bytes.readByte(1);
int u8 = bytes.readUnsignedByte(2);
short s16 = bytes.readShort(3);
int u16 = bytes.readUnsignedShort(5);
int s32 = bytes.readInt(7);
long u32 = bytes.readUnsignedInt(11);
long s64 = bytes.readLong(15);
float f32 = bytes.readFloat(23);
double f64 = bytes.readDouble(27);

prints

00000000 59 01 02 03 00 04 00 06  00 00 00 07 00 00 00 08 Y······· ········
00000010 00 00 00 00 00 00 00 00  00 10 41 00 00 00 00 00 ········ ··A·····
00000020 00 24 40                                         ·$@

Note	While HexDumpBytes supports the offset methods, you need to provide the offset in binary and the dump making it more complex to use.

Volatile read and ordered write

Chronicle Bytes supports variants of the write primitives which have a store barrier writeOrderedXxxx, and reads with a load barrier readVolatileXxxx

Note	write ordered doesn’t stall the pipeline to wait for the write to occur, making it possible for a single thread to read an old value after the ordered write.

Working with text

You can also write and read text to Bytes for low level, direct to native memory text processing.

Writing primitives as text

Bytes<ByteBuffer> bytes = Bytes.elasticHeapByteBuffer(64);
bytes.append(true).append('\n');
bytes.append(1).append('\n');
bytes.append(2L).append('\n');
bytes.append('3').append('\n');
bytes.append(4.1f).append('\n');
bytes.append(5.2).append('\n');
bytes.append(6.2999999, 3).append('\n');

System.out.println(bytes.toHexString());

prints

00000000 54 0a 31 0a 32 0a 33 0a  34 2e 31 0a 35 2e 32 0a T·1·2·3· 4.1·5.2·
00000010 36 2e 33 30 30 0a                                6.300·

Reading primitives as text

boolean flag = bytes.parseBoolean();
int s32 = bytes.parseInt();
long s64 = bytes.parseLong();
String ch = bytes.parseUtf8(StopCharTesters.SPACE_STOP);
float f32 = bytes.parseFloat();
double f64 = bytes.parseDouble();
double f64b = bytes.parseDouble();

Note	There are fewer methods for text as 8, 16 and 24 bit can use methods for `int`, Unsigned int can use the `long` method.

Reading and Writing Strings

Chronicle Bytes supports two encodings, ISO-8859-1 and UTF-8. It also supports writing these as binary with a length prefix, and a string which should be terminated. Bytes expects Strings to be read to a buffer for further processing, possibly with a String pool.

HexDumpBytes bytes = new HexDumpBytes();
bytes.comment("write8bit").write8bit("£ 1");
bytes.comment("writeUtf8").writeUtf8("£ 1");
bytes.comment("append8bit").append8bit("£ 1").append('\n');
bytes.comment("appendUtf8").appendUtf8("£ 1").append('\n');

System.out.println(bytes.toHexString());

prints

03 a3 20 31                                     # write8bit
04 c2 a3 20 31                                  # writeUtf8
a3 20 31 0a                                     # append8bit
c2 a3 20 31 0a                                  # appendUtf8

String a = bytes.read8bit();
String b = bytes.readUtf8();
String c = bytes.parse8bit(StopCharTesters.CONTROL_STOP);
String d = bytes.parseUtf8(StopCharTesters.CONTROL_STOP);

Binary strings are prefixed with a Stop Bit Encoded length.

HexDumpBytes bytes = new HexDumpBytes();
bytes.comment("write8bit").write8bit((String) null);
bytes.comment("writeUtf8").writeUtf8(null);

System.out.println(bytes.toHexString());

String a = bytes.read8bit();
String b = bytes.readUtf8();
assertEquals(null, a);
assertEquals(null, b);

prints

80 00                                           # write8bit
80 00                                           # writeUtf8

Note	`80 00` is the stop bit encoding for `-1` or `~0`

Compare and Set operation

In binary, you can atomically replace an int or long on condition that it is an expected value.

Write two fields, remember where the int and long are

HexDumpBytes bytes = new HexDumpBytes();

bytes.comment("s32").writeUtf8("s32");
long s32 = bytes.writePosition();
bytes.writeInt(0);

bytes.comment("s64").writeUtf8("s64");
long s64 = bytes.writePosition();
bytes.writeLong(0);

System.out.println(bytes.toHexString());

prints

03 73 33 32 00 00 00 00                         # s32
03 73 36 34 00 00 00 00 00 00 00 00             # s64

CAS two fields

assertTrue(bytes.compareAndSwapInt(s32, 0, Integer.MAX_VALUE));
assertTrue(bytes.compareAndSwapLong(s64, 0, Long.MAX_VALUE));

System.out.println(bytes.toHexString());

prints

03 73 33 32 ff ff ff 7f                         # s32
03 73 36 34 ff ff ff ff ff ff ff 7f             # s64

INFO: You might wonder, how is the hex dump updated as well as the binary? The readPosition actually holds the write position for both, which is why it has to be computed in this case.

Stop bit compression

Stop Bit encoding is one form of simple compression. For each 7 bits set, a byte is used with the high bit set when there is another byte to write.

See Stop Bit Encoding RFC for more details

Writing with stop bit encoding

HexDumpBytes bytes = new HexDumpBytes();

for (long i : new long[]{
        0, -1,
        127, -127,
        128, -128,
        1 << 14, 1 << 21,
        1 << 28, 1L << 35,
        1L << 42, 1L << 49,
        1L << 56, Long.MAX_VALUE,
        Long.MIN_VALUE}) {
    bytes.comment(i   "L").writeStopBit(i);
}

for (double d : new double[]{
        0.0,
        -0.0,
        1.0,
        1.0625,
        -128,
        -Double.MIN_NORMAL,
        Double.NEGATIVE_INFINITY,
        Double.NaN,
        Double.POSITIVE_INFINITY}) {
    bytes.comment(d   "").writeStopBit(d);
}

System.out.println(bytes.toHexString());

prints

00                                              # 0L
80 00                                           # -1L
7f                                              # 127L
fe 00                                           # -127L
80 01                                           # 128L
ff 00                                           # -128L
80 80 01                                        # 16384L
80 80 80 01                                     # 2097152L
80 80 80 80 01                                  # 268435456L
80 80 80 80 80 01                               # 34359738368L
80 80 80 80 80 80 01                            # 4398046511104L
80 80 80 80 80 80 80 01                         # 562949953421312L
80 80 80 80 80 80 80 80 01                      # 72057863037927936L
ff ff ff ff ff ff ff ff 7f                      # 9223372036854775807L
ff ff ff ff ff ff ff ff ff 00                   # -9223372036854775808L
00                                              # 0.0
40                                              # -0.0
9f 7c                                           # 1.0
9f fc 20                                        # 1.0625
e0 18                                           # -128.0
c0 04                                           # -2.2250738585072014E-308
ff 7c                                           # -Infinity
bf 7e                                           # NaN
bf 7c                                           # Infinity

To read these you need either long x = bytes.readStopBit() or double d = bytes.readStopBitDouble()

BytesMarshallable objects

Chronicle Bytes supports serializing simple objects where the type is not stored. This is similar to`RawWire` in Chronicle Wire.

@NotNull MyByteable mb1 = new MyByteable(false, (byte) 1, (short) 2, '3', 4, 5.5f, 6, 7.7);
@NotNull MyByteable mb2 = new MyByteable(true, (byte) 11, (short) 22, 'T', 44, 5.555f, 66, 77.77);
ZonedDateTime zdt1 = ZonedDateTime.parse("2017-11-06T12:35:56.775Z[Europe/London]");
ZonedDateTime zdt2 = ZonedDateTime.parse("2016-10-05T01:34:56.775Z[Europe/London]");
UUID uuid1 = new UUID(0x123456789L, 0xABCDEF);
UUID uuid2 = new UUID(0x1111111111111111L, 0x2222222222222222L);
@NotNull MyScalars ms1 = new MyScalars("Hello", BigInteger.ONE, BigDecimal.TEN, zdt1.toLocalDate(), zdt1.toLocalTime(), zdt1.toLocalDateTime(), zdt1, uuid1);
@NotNull MyScalars ms2 = new MyScalars("World", BigInteger.ZERO, BigDecimal.ZERO, zdt2.toLocalDate(), zdt2.toLocalTime(), zdt2.toLocalDateTime(), zdt2, uuid2);
@NotNull MyNested mn1 = new MyNested(mb1, ms1);
@NotNull MyNested mn2 = new MyNested(mb2, ms2);
bytes.comment("mn1").writeUnsignedByte(1);
mn1.writeMarshallable(bytes);
bytes.comment("mn2").writeUnsignedByte(2);
mn2.writeMarshallable(bytes);

MyByteable data structure

class MyByteable implements BytesMarshallable {
    boolean flag;
    byte b;
    short s;
    char c;
    int i;
    float f;
    long l;
    double d;

    public MyByteable(boolean flag, byte b, short s, char c, int i, float f, long l, double d) {
        this.flag = flag;
        this.b = b;
        this.s = s;
        this.c = c;
        this.i = i;
        this.f = f;
        this.l = l;
        this.d = d;
    }

MyScalars data structure

class MyScalars implements BytesMarshallable {
    String s;
    BigInteger bi;
    BigDecimal bd;
    LocalDate date;
    LocalTime time;
    LocalDateTime dateTime;
    ZonedDateTime zonedDateTime;
    UUID uuid;

    public MyScalars(String s, BigInteger bi, BigDecimal bd, LocalDate date, LocalTime time, LocalDateTime dateTime, ZonedDateTime zonedDateTime, UUID uuid) {
        this.s = s;
        this.bi = bi;
        this.bd = bd;
        this.date = date;
        this.time = time;
        this.dateTime = dateTime;
        this.zonedDateTime = zonedDateTime;
        this.uuid = uuid;
    }

prints

01                                              # mn1
                                                # byteable
      4e                                              # flag
      01                                              # b
      02 00                                           # s
      33                                              # c
      04 00 00 00                                     # i
      00 00 b0 40                                     # f
      06 00 00 00 00 00 00 00                         # l
      cd cc cc cc cc cc 1e 40                         # d
                                                # scalars
      05 48 65 6c 6c 6f                               # s
      01 31                                           # bi
      02 31 30                                        # bd
      0a 32 30 31 37 2d 31 31 2d 30 36                # date
      0c 31 32 3a 33 35 3a 35 36 2e 37 37 35          # time
      17 32 30 31 37 2d 31 31 2d 30 36 54 31 32 3a 33 # dateTime
      35 3a 35 36 2e 37 37 35 27 32 30 31 37 2d 31 31 # zonedDateTime
      2d 30 36 54 31 32 3a 33 35 3a 35 36 2e 37 37 35
      5a 5b 45 75 72 6f 70 65 2f 4c 6f 6e 64 6f 6e 5d # uuid
      24 30 30 30 30 30 30 30 31 2d 32 33 34 35 2d 36
      37 38 39 2d 30 30 30 30 2d 30 30 30 30 30 30 61
      62 63 64 65 66
02                                              # mn2
                                                # byteable
      59                                              # flag
      0b                                              # b
      16 00                                           # s
      54                                              # c
      2c 00 00 00                                     # i
      8f c2 b1 40                                     # f
      42 00 00 00 00 00 00 00                         # l
      e1 7a 14 ae 47 71 53 40                         # d
                                                # scalars
      05 57 6f 72 6c 64                               # s
      01 30                                           # bi
      01 30                                           # bd
      0a 32 30 31 36 2d 31 30 2d 30 35                # date
      0c 30 31 3a 33 34 3a 35 36 2e 37 37 35          # time
      17 32 30 31 36 2d 31 30 2d 30 35 54 30 31 3a 33 # dateTime
      34 3a 35 36 2e 37 37 35 2c 32 30 31 36 2d 31 30 # zonedDateTime
      2d 30 35 54 30 31 3a 33 34 3a 35 36 2e 37 37 35
      2b 30 31 3a 30 30 5b 45 75 72 6f 70 65 2f 4c 6f
      6e 64 6f 6e 5d 24 31 31 31 31 31 31 31 31 2d 31 # uuid
      31 31 31 2d 31 31 31 31 2d 32 32 32 32 2d 32 32
      32 32 32 32 32 32 32 32 32 32

Data driven tests

The purpose of a Lambda function is to create a simple, highly reproducible, easily testable component.

Once you have your data dumped as hexadecimal, you can create tests using that data, and make variations of those tests.

What do we mean by a Lambda function?

In this context a Lambda function is one which is entirely input driven and produces a list of messages (one or more outputs).

The simplest Lambda function is stateless, however this has limited application. They are useful for message translation.

If you need a stateful Lambda function, you can consider the input to the function to be every message it has ever consumed. Obviously this is inefficient, however with appropriate caches in your lamdba function, you can process and produce result incrementally.

Data in and out.

We module a Lambda function as having an interface for inputs and another for outputs. These interfaces can be the same.

Sample interface for Lambda function

interface IBytesMethod {
    @MethodId(0x81L) // (1)
    void myByteable(MyByteable byteable);

    @MethodId(0x82L)
    void myScalars(MyScalars scalars);

    @MethodId(0x83L)
    void myNested(MyNested nested);
}

assign a unique id to each method to simplify decoding/encoding.

Each method needs a DTO to describe the data for that message.

class MyByteable implements BytesMarshallable {
    boolean flag;
    byte b;
    short s;
    char c;
    int i;
    float f;
    long l;
    double d;
// rest of class
}

class MyScalars implements BytesMarshallable {
    String s;
    BigInteger bi;
    BigDecimal bd;
    LocalDate date;
    LocalTime time;
    LocalDateTime dateTime;
    ZonedDateTime zonedDateTime;
    UUID uuid;
// rest of class
}

class MyNested implements BytesMarshallable {
    MyByteable byteable;
    MyScalars scalars;
// rest of class
}

The implementation needs to take it’s output interface and implement the input interface

A simple pass through implementation

static class IBMImpl implements IBytesMethod {
    final IBytesMethod out;

    IBMImpl(IBytesMethod out) { this.out = out; }

    @Override
    public void myByteable(MyByteable byteable) { out.myByteable(byteable); }

    @Override
    public void myScalars(MyScalars scalars) { out.myScalars(scalars); }

    @Override
    public void myNested(MyNested nested) { out.myNested(nested); }
}

Once we have interfaces, DTOs, and an implementation we can setup a test harness

Setup a test harness for a Lambda function

protected void btmttTest(String input, String output)
throws IOException {
    BytesTextMethodTester tester = new BytesTextMethodTester<>(
            input,
            IBMImpl::new,
            IBytesMethod.class,
            output);
    tester.run();
    assertEquals(tester.expected(), tester.actual());
}

This allows us to give two files, one for expected inputs and one for expected outputs.

@Test
public void run()
throws IOException {
    btmttTest("btmtt/prim-input.txt", "btmtt/prim-output.txt");
}

Note	In this case the input and outputs are expected to be the same.

Sample input/output file

81 01                                           # myByteable
   4e                                              # flag
   01                                              # b
   02 00                                           # s
   33                                              # c
   04 00 00 00                                     # i
   00 00 b0 40                                     # f
   06 00 00 00 00 00 00 00                         # l
   cd cc cc cc cc cc 1e 40                         # d
### End Of Block
81 01                                           # myByteable
   59                                              # flag
   0b                                              # b
   16 00                                           # s
   54                                              # c
   2c 00 00 00                                     # i
   8f c2 b1 40                                     # f
   42 00 00 00 00 00 00 00                         # l
   e1 7a 14 ae 47 71 53 40                         # d
### End Of Block
82 01                                           # myScalars
   05 48 65 6c 6c 6f                               # s
   01 31                                           # bi
   02 31 30                                        # bd
   0a 32 30 31 37 2d 31 31 2d 30 36                # date
   0c 31 32 3a 33 35 3a 35 36 2e 37 37 35          # time
   17 32 30 31 37 2d 31 31 2d 30 36 54 31 32 3a 33 # dateTime
   35 3a 35 36 2e 37 37 35 27 32 30 31 37 2d 31 31 # zonedDateTime
   2d 30 36 54 31 32 3a 33 35 3a 35 36 2e 37 37 35
   5a 5b 45 75 72 6f 70 65 2f 4c 6f 6e 64 6f 6e 5d # uuid
   24 30 30 30 30 30 30 30 31 2d 32 33 34 35 2d 36
   37 38 39 2d 30 30 30 30 2d 30 30 30 30 30 30 61
   62 63 64 65 66
### End Of Block
83 01                                           # myNested
                                                # byteable
      59                                              # flag
      0b                                              # b
      16 00                                           # s
      54                                              # c
      2c 00 00 00                                     # i
      8f c2 b1 40                                     # f
      42 00 00 00 00 00 00 00                         # l
      e1 7a 14 ae 47 71 53 40                         # d
                                                # scalars
      05 57 6f 72 6c 64                               # s
      01 30                                           # bi
      01 30                                           # bd
      0a 32 30 31 36 2d 31 30 2d 30 35                # date
      0c 30 31 3a 33 34 3a 35 36 2e 37 37 35          # time
      17 32 30 31 36 2d 31 30 2d 30 35 54 30 31 3a 33 # dateTime
      34 3a 35 36 2e 37 37 35 2c 32 30 31 36 2d 31 30 # zonedDateTime
      2d 30 35 54 30 31 3a 33 34 3a 35 36 2e 37 37 35
      2b 30 31 3a 30 30 5b 45 75 72 6f 70 65 2f 4c 6f
      6e 64 6f 6e 5d 24 31 31 31 31 31 31 31 31 2d 31 # uuid
      31 31 31 2d 31 31 31 31 2d 32 32 32 32 2d 32 32
      32 32 32 32 32 32 32 32 32 32
### End Of Block
### End Of Test

In this case, the test calls the methods with the matching method ids which in turn uses the same ids to encode the output.

Note	Creating and maintain such tests can be an overhead you don’t need. In this case, you can use Chronicle Wire’s YAML testing format to check functionality. Wire can be used for most of the tests even if you intend to use Bytes for production.

Comparison of access to native memory

Feature	ByteBuffer	Netty IOBuffer	Aeron UnsafeBuffer	Chronicle Bytes
Read/write primitives in native memory	Yes	Yes	Yes	Yes
Separate mutable interfaces	Runtime check	Runtime check	Yes	Yes
Read/Write UTF-8 strings	No	No	Limited to Strings	Supports any CharSequence Appendable
Read/Write ISO-8859-1 strings	No	No	?	Supports any CharSequence Appendable
Support Endianness	Supports both Big and Little	Supports both Big and Little	Supports both Big and Little	Supports Native only
Size of buffer	Limited to 31-bit	Limited to 31-bit	Limited to 31-bit	Supports up to 63-bit
Elastic ByteBuffers	No	Yes	No	Yes
Disable bounds checks	No	No	Can be set globally	Can be set per buffer
Wrap an address	No	No	Yes	Yes
Thread-safe read/write, CAS, and atomic add operations	No	No	Supports int and long	Supports int, long, float, and double
Streaming access	Yes	Yes	No	Yes
Deterministic release of memory	Via internal API	Via internal API	Caller’s responsibility	Yes, supported natively
Separate read and write position	No	Yes	Not applicable	Yes
Sync to disk of memory-mapped files	No	No	No	Supports both MS_ASYNC and MS_SYNC

The above table provides a clear comparison of the various memory access features supported by ByteBuffer, Netty IOBuffer, Aeron UnsafeBuffer, and Chronicle Bytes.

Utilizing Memory Mapped Files

Memory mapped files function like Bytes instances, expanding as required. A specific chunk size determines the growth rate as more Bytes are employed. A syncMode can be set to ensure data is flushed as each chunk is released.

Below is an example of opening two MappedBytes for the same memory region:

Open two MappedBytes for the same region of memory

// Specify the file name, chunk size, and overlap size of each chunk
try (MappedBytes bytesW = MappedBytes.mappedBytes(file, 64 << 10, 16 << 10);
        MappedBytes bytesR = MappedBytes.mappedBytes(file,  64 << 10, 16 << 10)) {
        bytesW.syncMode(SyncMode.ASYNC); // Asynchronously flush each chunk to disk
    }

Memory mapped files are commonly used by Chronicle Map and Chronicle Queue.

Debugging Chronicle-Bytes

When utilizing IntelliJ IDEA, you can configure a custom renderer to view the bytes. Please refer to the images below for guidance on setting this up:

Note on Code Coverage

When conducting code coverage, it may be beneficial to exclude AbstractBytes as it can significantly reduce the execution speed of unit tests.

Name		Name	Last commit message	Last commit date
Latest commit History 3,870 Commits
docs/images		docs/images
images		images
microbenchmarks		microbenchmarks
src		src
.gitignore		.gitignore
LICENSE		LICENSE
README.adoc		README.adoc
license_header.txt		license_header.txt
license_header_def.xml		license_header_def.xml
pom.xml		pom.xml
system.properties		system.properties
systemProperties.adoc		systemProperties.adoc

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

Chronicle Bytes

Introduction

Supported Data Types

Explanation of Data Types

Creating Bytes Instances

Understanding Bytes Capacity, Read/Write Position and Limit

BytesStore

Bytes versus BytesStore

bytesForRead() and bytesForWrite()

Flipping Bytes

Writing to a Hexadecimal dump

Writing and reading using offsets

Volatile read and ordered write

Working with text

Reading and Writing Strings

Compare and Set operation

Stop bit compression

BytesMarshallable objects

Data driven tests

What do we mean by a Lambda function?

Data in and out.

Comparison of access to native memory

Utilizing Memory Mapped Files

Debugging Chronicle-Bytes

Note on Code Coverage

About

Releases 452

Packages

Contributors 35

Languages

License

OpenHFT/Chronicle-Bytes

Folders and files

Latest commit

History

Repository files navigation

Chronicle Bytes

Introduction

Supported Data Types

Explanation of Data Types

Creating Bytes Instances

Understanding Bytes Capacity, Read/Write Position and Limit

BytesStore

Bytes versus BytesStore

bytesForRead() and bytesForWrite()

Flipping Bytes

Writing to a Hexadecimal dump

Writing and reading using offsets

Volatile read and ordered write

Working with text

Reading and Writing Strings

Compare and Set operation

Stop bit compression

BytesMarshallable objects

Data driven tests

What do we mean by a Lambda function?

Data in and out.

Comparison of access to native memory

Utilizing Memory Mapped Files

Debugging Chronicle-Bytes

Note on Code Coverage

About

Resources

License

Stars

Watchers

Forks

Releases 452

Packages 0

Contributors 35

Languages

Packages