NVIDIA DeepStream SDK 7.1 / 7.0 / 6.4 / 6.3 / 6.2 / 6.1.1 / 6.1 / 6.0.1 / 6.0 / 5.1 configuration for YOLO models

• Support for INT8 calibration
• Support for non square models
• Models benchmarks
• Support for Darknet models (YOLOv4, etc) using cfg and weights conversion with GPU post-processing
• Support for RT-DETR, YOLO-NAS, PPYOLOE , PPYOLOE, DAMO-YOLO, Gold-YOLO, RTMDet (MMYOLO), YOLOX, YOLOR, YOLOv9, YOLOv8, YOLOv7, YOLOv6 and YOLOv5 using ONNX conversion with GPU post-processing
• GPU bbox parser
• Custom ONNX model parser
• Dynamic batch-size
• INT8 calibration (PTQ) for Darknet and ONNX exported models

• Requirements
• Supported models
• Benchmarks
• dGPU installation
• Basic usage
• Docker usage
• NMS configuration
• Notes
• INT8 calibration
• YOLOv5 usage
• YOLOv6 usage
• YOLOv7 usage
• YOLOv8 usage
• YOLOv9 usage
• YOLOR usage
• YOLOX usage
• RTMDet (MMYOLO) usage
• Gold-YOLO usage
• DAMO-YOLO usage
• PP-YOLOE / PP-YOLOE usage
• YOLO-NAS usage
• RT-DETR PyTorch usage
• RT-DETR Paddle usage
• RT-DETR Ultralytics usage
• Using your custom model
• Multiple YOLO GIEs

• Ubuntu 22.04
• CUDA 12.6 Update 2
• TensorRT 10.3 GA (10.3.0.26)
• NVIDIA Driver 535.183.06 (Data center / Tesla series) / 560.35.03 (TITAN, GeForce RTX / GTX series and RTX / Quadro series)
• NVIDIA DeepStream SDK 7.1
• GStreamer 1.20.3
• DeepStream-Yolo

• Ubuntu 22.04
• CUDA 12.2 Update 2
• TensorRT 8.6 GA (8.6.1.6)
• NVIDIA Driver 535 (>= 535.161.08)
• NVIDIA DeepStream SDK 7.0
• GStreamer 1.20.3
• DeepStream-Yolo

• Ubuntu 22.04
• CUDA 12.2 Update 2
• TensorRT 8.6 GA (8.6.1.6)
• NVIDIA Driver 535 (>= 535.104.12)
• NVIDIA DeepStream SDK 6.4
• GStreamer 1.20.3
• DeepStream-Yolo

• Ubuntu 20.04
• CUDA 12.1 Update 1
• TensorRT 8.5 GA Update 2 (8.5.3.1)
• NVIDIA Driver 525 (>= 525.125.06)
• NVIDIA DeepStream SDK 6.3
• GStreamer 1.16.3
• DeepStream-Yolo

• Ubuntu 20.04
• CUDA 11.8
• TensorRT 8.5 GA Update 1 (8.5.2.2)
• NVIDIA Driver 525 (>= 525.85.12)
• NVIDIA DeepStream SDK 6.2
• GStreamer 1.16.3
• DeepStream-Yolo

• Ubuntu 20.04
• CUDA 11.7 Update 1
• TensorRT 8.4 GA (8.4.1.5)
• NVIDIA Driver 515.65.01
• NVIDIA DeepStream SDK 6.1.1
• GStreamer 1.16.2
• DeepStream-Yolo

• Ubuntu 20.04
• CUDA 11.6 Update 1
• TensorRT 8.2 GA Update 4 (8.2.5.1)
• NVIDIA Driver 510.47.03
• NVIDIA DeepStream SDK 6.1
• GStreamer 1.16.2
• DeepStream-Yolo

• Ubuntu 18.04
• CUDA 11.4 Update 1
• TensorRT 8.0 GA (8.0.1)
• NVIDIA Driver 470.63.01
• NVIDIA DeepStream SDK 6.0.1 / 6.0
• GStreamer 1.14.5
• DeepStream-Yolo

• Ubuntu 18.04
• CUDA 11.1
• TensorRT 7.2.2
• NVIDIA Driver 460.32.03
• NVIDIA DeepStream SDK 5.1
• GStreamer 1.14.5
• DeepStream-Yolo

• JetPack 6.1
• NVIDIA DeepStream SDK 7.1
• DeepStream-Yolo

• JetPack 6.0
• NVIDIA DeepStream SDK 7.0
• DeepStream-Yolo

• JetPack 6.0 DP
• NVIDIA DeepStream SDK 6.4
• DeepStream-Yolo

• JetPack 5.1.3 / 5.1.2
• NVIDIA DeepStream SDK 6.3
• DeepStream-Yolo

• JetPack 5.1.3 / 5.1.2 / 5.1.1 / 5.1
• NVIDIA DeepStream SDK 6.2
• DeepStream-Yolo

• JetPack 5.0.2
• NVIDIA DeepStream SDK 6.1.1
• DeepStream-Yolo

• JetPack 5.0.1 DP
• NVIDIA DeepStream SDK 6.1
• DeepStream-Yolo

• JetPack 4.6.4
• NVIDIA DeepStream SDK 6.0.1 / 6.0
• DeepStream-Yolo

• JetPack 4.5.1
• NVIDIA DeepStream SDK 5.1
• DeepStream-Yolo

• Darknet
• MobileNet-YOLO
• YOLO-Fastest
• YOLOv5
• YOLOv6
• YOLOv7
• YOLOv8
• YOLOv9
• YOLOR
• YOLOX
• RTMDet (MMYOLO)
• Gold-YOLO
• DAMO-YOLO
• PP-YOLOE / PP-YOLOE
• YOLO-NAS

git clone https://github.com/marcoslucianops/DeepStream-Yolo.git
cd DeepStream-Yolo

3.1. Set the CUDA_VER according to your DeepStream version

export CUDA_VER=XY.Z

• x86 platform

  DeepStream 7.1 = 12.6
  DeepStream 7.0 / 6.4 = 12.2
  DeepStream 6.3 = 12.1
  DeepStream 6.2 = 11.8
  DeepStream 6.1.1 = 11.7
  DeepStream 6.1 = 11.6
  DeepStream 6.0.1 / 6.0 = 11.4
  DeepStream 5.1 = 11.1
  

• Jetson platform

  DeepStream 7.1 = 12.6
  DeepStream 7.0 / 6.4 = 12.2
  DeepStream 6.3 / 6.2 / 6.1.1 / 6.1 = 11.4
  DeepStream 6.0.1 / 6.0 / 5.1 = 10.2
  

3.2. Make the lib

make -C nvdsinfer_custom_impl_Yolo clean && make -C nvdsinfer_custom_impl_Yolo

[property]
...
custom-network-config=yolov4.cfg
model-file=yolov4.weights
...

NOTE: For Darknet models, by default, the dynamic batch-size is set. To use static batch-size, uncomment the line

...
force-implicit-batch-dim=1
...

deepstream-app -c deepstream_app_config.txt

NOTE: The TensorRT engine file may take a very long time to generate (sometimes more than 10 minutes).

NOTE: If you want to use YOLOv2 or YOLOv2-Tiny models, change the deepstream_app_config.txt file before run it

...
[primary-gie]
...
config-file=config_infer_primary_yoloV2.txt
...

• x86 platform

  nvcr.io/nvidia/deepstream:7.1-gc-triton-devel
  nvcr.io/nvidia/deepstream:7.1-triton-multiarch
  

• Jetson platform

  nvcr.io/nvidia/deepstream:7.1-triton-multiarch
  

NOTE: To compile the nvdsinfer_custom_impl_Yolo, you need to install the g inside the container

apt-get install build-essential

NOTE: With DeepStream 7.1, the docker containers do not package libraries necessary for certain multimedia operations like audio data parsing, CPU decode, and CPU encode. This change could affect processing certain video streams/files like mp4 that include audio track. Please run the below script inside the docker images to install additional packages that might be necessary to use all of the DeepStreamSDK features:

/opt/nvidia/deepstream/deepstream/user_additional_install.sh

To change the nms-iou-threshold, pre-cluster-threshold and topk values, modify the config_infer file

[class-attrs-all]
nms-iou-threshold=0.45
pre-cluster-threshold=0.25
topk=300

NOTE: Make sure to set cluster-mode=2 in the config_infer file.

1. Sometimes while running gstreamer pipeline or sample apps, user can encounter error: GLib (gthread-posix.c): Unexpected error from C library during 'pthread_setspecific': Invalid argument. Aborting.. The issue is caused because of a bug in glib 2.0-2.72 version which comes with Ubuntu 22.04 by default. The issue is addressed in glib 2.76 and its installation is required to fix the issue (https://github.com/GNOME/glib/tree/2.76.6).

   • Migrate glib to newer version

     pip3 install meson
     pip3 install ninja
     

     NOTE: It is recommended to use Python virtualenv.

     git clone https://github.com/GNOME/glib.git
     cd glib
     git checkout 2.76.6
     meson build --prefix=/usr
     ninja -C build/
     cd build/
     ninja install
     

   • Check and confirm the newly installed glib version:

     pkg-config --modversion glib-2.0
     

2. Sometimes with RTSP streams the application gets stuck on reaching EOS. This is because of an issue in rtpjitterbuffer component. To fix this issue, a script has been provided with required details to update gstrtpmanager library.

   /opt/nvidia/deepstream/deepstream/update_rtpmanager.sh
   

You can get metadata from DeepStream using Python and C/C . For C/C , you can edit the deepstream-app or deepstream-test codes. For Python, your can install and edit deepstream_python_apps.

Basically, you need manipulate the NvDsObjectMeta (Python / C/C ) and NvDsFrameMeta (Python / C/C ) to get the label, position, etc. of bboxes.

My projects: https://www.youtube.com/MarcosLucianoTV