This is the experimental CMSIS-Toolbox Laboratory for csolution - CMSIS Project Manager.

It is possible to create Blinky and IoT (AWS MQTT Demo) examples for different boards using csolution and cproject YML files.

Available examples:

• Blinky project
• AWS MQTT Demo

Tools:

• CMSIS-Toolbox 1.3.0
• Keil MDK 5.38
• Arm Compiler 6.19 (part of MDK)

CMSIS packs: see examples for list of required packs

Subdirectory: example/Blinky

Simple project blinking LEDs. See details in README.md.

Required CMSIS packs are listed in file Blinky.csolution.yml.

Project is available for for different build types and for different boards. See table Boards - Examples.

1. start in folder ./example/Blinky/

2. Use csolution to create .cprj project

csolution convert -s Blinky.csolution.yml -c Blinky.<build-type> <target-type>

    <build-type>:  Debug | Release
    <target-type>: <board name>

example: csolution convert -s Blinky.csolution.yml -c Blinky.Debug 32L4R9IDISCOVERY

3. Use cbuild or MDK to build the created project

• cbuild:

cbuild Blinky.<build-type> <target-type>.cprj  

example: cbuild Blinky.Debug 32L4R9IDISCOVERY.cprj

• MDK:
  • import *.cprj and build

4. Run the demo

• power the board and establish debug connection
• program the image to the target
• run the program

Subdirectory: example/IoT/AWS_MQTT_MutualAuth_Demo

Demo for connecting to AWS cloud. See details in README.md.

Note: Make sure to update the credentials as described.

Required CMSIS packs are listed in file IoT.csolution.yml.

Project is available for different build types, for different boards, for different WiFi modules and Ethernet connection. See table Boards - Examples.

1. start in folder ./example/IoT/

2. Use csolution to create .cprj project

csolution convert -s IoT.csolution.yml -c AWS_MQTT_MutualAuth_Demo.<build-type> <target-type>

    <build-type>:  Debug | Release
    <target-type>: <board-name>[ <module-name>]
    <module-name>: ESP8266 | ISM43362 | WizFi360
    
    Note: if optional <module-name> is not spezified then on-board WifI or on-board Ethernet is used. 

example: csolution convert -s IoT.csolution.yml -c AWS_MQTT_MutualAuth_Demo.Debug 32L4R9IDISCOVERY_ESP8266

3. Configure CMSIS-Driver
   Note: due to current importer limitation it is necessary to manually configure the used CMSIS-Driver. According table Boards - Examples choose the correct serial driver number for Driver_USART or Driver_SPI.

4. Use cbuild or MDK to build the created project

• cbuild:

cbuild AWS_MQTT_MutualAuth_Demo/AWS_MQTT_MutualAuth_Demo.<build-type> <target-type>.cprj  

example: cbuild AWS_MQTT_MutualAuth_Demo/AWS_MQTT_MutualAuth_Demo.Debug 32L4R9IDISCOVERY.cprj

• MDK:
  • import AWS_MQTT_MutualAuth_Demo/*.cprj and build
    Note: due to current importer limitation it is necessary to manually add the following preprocessor define MBEDTLS_CONFIG_FILE=\"aws_mbedtls_config.h\"

5. Run the demo

• power the board and establish debug connection
• open terminal and connect to board's serial port (Baud rate: 115200)
• program the image to the target
• reset the target and observe messages in the terminal