Rad Pro is a custom firmware that enhances the capabilities of several commercially available Geiger counters, including the FS2011, YT-203B, Bosean FS-600, Bosean FS-1000, Bosean FS-5000 and FNIRSI GC-01.

With Rad Pro, you can:

• Measure instantaneous radiation rate.
• Measure average radiation rate for performing surveys.
• Measure cumulative dose.
• Set up user-adjustable rate and dose alarms.
• Plot radiation rate history (10 minutes, 1 hour and 24 hours).
• Log data to the built-in flash memory or live to a computer, optionally sending the data to the gmcmap.com, radmon.org and safecast.org radiation monitoring websites.
• Generate true random data: secure passwords (alphanumeric, full ASCII), random hexadecimal and decimal numbers, dice throws (4-sided, 6-sided, 8-sided, 12-sided and 20-sided) and coin flips.

• Read before installing: legal stuff
• Installing on the FS2011/YT-203B
• Installing on the Bosean FS-600/Bosean FS-1000
• Installing on the Bosean FS-5000
• Installing on the FNIRSI GC-01
• Rad Pro simulator
• Installing on other devices

• User's manual
• Developers's manual

• Rad Pro's user interface is based on the OpenBridge 5.0 design system.
• Thanks to Alfred90, danielhahn76, felixsteghofer, DG0MG, murkle, cromagn, ivohar,mryndzionek, JantarX, mizsha, Tig3rch3n, Arparela, w01fdev, martin-machacek, dsl71, Davegsm82, alfmck, jonwhite227, dc1rdb, ihrapsa and many others who helped with device testing and suggestions.
• Thanks to pixitha for the FS2011/GD32F150 board photos with a J305 Geiger tube, felixsteghofer for the FS2011/GD32F103 board photos, DG0MG for the Bosean FS-600 board photos, murkle for the Bosean FS-1000 board photos, ivohar for the FNIRSCI GC-01 schematics and oOblik for the Bosean FS-5000 board photos.