Poking the IQOS vaping device.
[ 21.406903] usb 3-3: new full-speed USB device number 2 using xhci_hcd
[ 21.538848] usb 3-3: New USB device found, idVendor=2759, idProduct=0003
[ 21.538853] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 21.538871] usb 3-3: Product: Zurich FPD 4.x Charger
[ 21.538874] usb 3-3: Manufacturer: Philip Morris Products S.A.
[ 21.538876] usb 3-3: SerialNumber: AAAABBBBCCCCDDDD
[ 31.538246] hid-generic 0003:2759:0003.0004: timeout initializing reports
[ 31.538444] hid-generic 0003:2759:0003.0004: hiddev0,hidraw3: USB HID v1.01 Device [Philip Morris Products S.A. Zurich FPD 4.x Charger] on usb-0000:00:14.0-3/input0
The Vendor ID is not found in the USB vendor database, (serial number is altered for privacy, it's obviously supposed to be a string unique to your device). There's nothing online about the device string except a thread on a Japanese forum.
Bus 003 Device 002: ID 2759:0003
Nothing extra listed here.
T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=2759 ProdID=0003 Rev= 2.00
S: Manufacturer=Philip Morris Products S.A.
S: Product=Zurich FPD 4.x Charger
S: SerialNumber=AAAABBBBCCCCDDDD
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms
E: Ad=01(O) Atr=03(Int.) MxPS= 64 Ivl=1ms
Raw output from the kernel interface.
Bus 003 Device 004: ID 2759:0003
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x2759
idProduct 0x0003
bcdDevice 2.00
iManufacturer 1 Philip Morris Products S.A.
iProduct 2 Zurich FPD 4.x Charger
iSerial 3 AAAABBBBCCCCDDDD
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 41
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 4 Standard configuration
bmAttributes 0xc0
Self Powered
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 0 No Subclass
bInterfaceProtocol 0 None
iInterface 5 Zurich FPD 4.x Charger HID
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.01
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 36
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Device Status: 0x0001
Self Powered
Verbose output from lsusb. The USB standard is quite complicated; simply
said, our device has two one way "communication ports" (the two endpoints
listed above), one for data input at address 0x81 and one for data output at
address 0x01.
Install python-usb:
apt-get install python-usb
Run the attached hiqos.py. The device seems to alternatively return 2
strings (further execution will keep repeating these two strings):
array('B', [63, 1, 0, 211, 225, 222, 150, 83, 118, 235, 189, 189, 219, 114, 27, 77, 182, 236, 156, 116, 151, 102, 175, 87, 23, 245, 108, 236, 28, 211, 188, 195, 187, 223, 197, 243, 237, 150, 246, 190, 115, 106, 127, 107, 255, 63, 233, 129, 140, 9, 243, 219, 172, 155, 189, 238, 87, 94, 4, 27, 0, 0, 0, 16])
array('B', [63, 1, 0, 6, 251, 210, 223, 205, 123, 255, 175, 249, 250, 125, 245, 190, 109, 123, 239, 126, 11, 59, 253, 250, 45, 251, 151, 124, 138, 70, 57, 197, 221, 175, 228, 99, 188, 109, 232, 117, 164, 159, 55, 247, 242, 29, 127, 237, 7, 155, 166, 153, 14, 215, 166, 126, 238, 241, 247, 122, 222, 55, 127, 103])
Sadly, the strings make no sense when converted to ASCII. First three bytes are identical, the rest are different.
[1] https://github.com/walac/pyusb/blob/master/docs/tutorial.rst
[2] http://www.beyondlogic.org/usbnutshell/usb4.shtml
[3] http://www.usbmadesimple.co.uk/ums_5.htm
[4] http://newae.com/files/Hackaday_USSSSSBTalkingUSBFromPython_OFlynn.pdf