This readme provides instructions on how to setup and register blobber to the Züs network .

• Züs Overview
• Initial Setup
• Directory Setup for Blobbers
• Building and Starting the Blobber
  • Building on Standard Hardware
  • Building on apple silicon
• Connect to other network
• Miscellaneous
• Cleanup
• Run blobber on ec2 / vm / bare metal
• Run blobber on ec2 / vm / bare metal over https
• Blobber local development guidelines

Züs is a high-performance cloud on a fast blockchain offering privacy and configurable uptime. It is an alternative to traditional cloud S3 and has shown better performance on a test network due to its parallel data architecture. The technology uses erasure code to distribute the data between data and parity servers. Züs storage is configurable to provide flexibility for IT managers to design for desired security and uptime, and can design a hybrid or a multi-cloud architecture with a few clicks using Blimp's workflow, and can change redundancy and providers on the fly.

For instance, the user can start with 10 data and 5 parity providers and select where they are located globally, and later decide to add a provider on-the-fly to increase resilience, performance, or switch to a lower cost provider.

Users can also add their own servers to the network to operate in a hybrid cloud architecture. Such flexibility allows the user to improve their regulatory, content distribution, and security requirements with a true multi-cloud architecture. Users can also construct a private cloud with all of their own servers rented across the globe to have a better content distribution, highly available network, higher performance, and lower cost.

The QoS protocol is time-based where the blockchain challenges a provider on a file that the provider must respond within a certain time based on its size to pass. This forces the provider to have a good server and data center performance to earn rewards and income.

The privacy protocol from Züs is unique where a user can easily share their encrypted data with their business partners, friends, and family through a proxy key sharing protocol, where the key is given to the providers, and they re-encrypt the data using the proxy key so that only the recipient can decrypt it with their private key.

Züs has ecosystem apps to encourage traditional storage consumption such as Blimp, a S3 server and cloud migration platform, and Vult, a personal cloud app to store encrypted data and share privately with friends and family, and Chalk, a high-performance story-telling storage solution for NFT artists.

Other apps are Bolt, a wallet that is very secure with air-gapped 2FA split-key protocol to prevent hacks from compromising your digital assets, and it enables you to stake and earn from the storage providers; Atlus, a blockchain explorer and Chimney, which allows anyone to join the network and earn using their server or by just renting one, with no prior knowledge required.

• Linux (Ubuntu Preferred) Version: 20.04 and Above
• Mac(Apple Silicon or Intel) Version: Big Sur and Above
• Windows(Requires WSL ) Version: Windows 11 or 10 version 2004 and above
• Docker is available for Linux, macOS and Windows platforms. Find instructions for the preferred operating system here.

1. Clone the Blobber repository using the command

git clone https://github.com/0chain/blobber.git

2. In the git/blobber run the following command

chmod  x ./docker.local/bin/blobber.init.setup.sh
./docker.local/bin/blobber.init.setup.sh

NOTE: For mac user please run below:

chmod  x ./docker.local/bin/blobber.init.setup-mac.sh
./docker.local/bin/blobber.init.setup-mac.sh

1. Setup a network called testnet0 for each of these node containers to talk to each other.

docker network create --driver=bridge --subnet=198.18.0.0/15 --gateway=198.18.0.255 testnet0

Note: Run all scripts as sudo

2. Set up the block_worker URL

A block worker URL is a field in the blobber/config/0chain_validator.yaml and blobber/config/0chain_blobber.yaml configuration files that require the URL of blockchain network you want to connect to. For testing purposes we will connect to the beta 0chain network and replace the default URL in blobber/config/0chain_validator.yaml and 0chain_blobber.yaml with the below-mentioned URL.

block_worker: https://demo.zus.network/dns

3. Go back to the blobber directory and build blobber containers using the scripts below

./docker.local/bin/build.base.sh
./docker.local/bin/build.blobber.sh
./docker.local/bin/build.validator.sh

Note: Run all scripts as sudo. This would take few minutes.

Sometimes in Apple Silicon devices (m1/m2 macbooks), buildx will not work for build scripts. To force a regular blobber build, run the following instead of the build commands mentioned above:

DOCKER_BUILD=build ./docker.local/bin/build.base.sh
DOCKER_BUILD=build ./docker.local/bin/build.blobber.sh
DOCKER_BUILD=build ./docker.local/bin/build.validator.sh.

4. To link to local gosdk so that the changes are reflected on the blobber build please use the below command(optional)

./docker.local/bin/build.blobber.dev.sh

5. Now create a wallet using zwalletcli and install zboxcli to perform storage operations on blobbers.Instructions for creating wallet and installing zboxcli are available here

6. Once the wallet is created, the wallet information will be stored in wallet.json located in the .zcn folder of the Linux home directory. Now navigate to the .zcn folder (this is created during zbox build)

cd $HOME/.zcn/

7. Open the wallet.json file. It should be similar to the similar to the output below:

{"client_id":"4af719e1fdb6244159f17922382f162387bae3708250cab6bc1c20cd85fb863c",
"client_key":"da1769bd0203b9c84dc19846ed94155b58d1ffeb3bbe35d38db5bf2fddf5a91c91b22bc7c89dd87e1f1fecbb17ef0db93517dd3886a64274997ea46824d2c119","keys":[{"public_key":"da1769bd0203b9c84dc19846ed94155b58d1ffeb3bbe35d38db5bf2fddf5a91c91b22bc7c89dd87e1f1fecbb17ef0db93517dd3886a64274997ea46824d2c1>
"private_key":"542f6be49108f52203ce75222601397aad32e554451371581ba0eca56b093d19"}],"mnemonics":"butter whisper wheat hope duck mention bird half wedding aim good regret maximum illegal much inch immune unlock resource congress drift>
"version":"1.0","date_created":"2021-09-09T20:22:56 05:30"}

8. Copy the client_id value and paste it into blobbers and validators settings. The files can be found in blobber/config directory.

9. Open both the blobber/config/0chain_validator.yaml and blobber/config/0chain_blobber.yaml and edit the delegate_wallet value with your client_id value.

10. Now run the blobbers by navigating into blobber directories for Blobber1 (git/blobber/docker.local/blobber1) and run the container using

# For locally build images
../bin/blobber.start_bls.sh

# For remote images
../bin/p0blobber.start.sh

Note: Replace the localhost form docker.local/p0docker-compose.yml to your public IP if you are trying to connect to another network .

If you are facing insufficient balance to pay fee errors when starting blobbers, you can turn off fees in 0chain.yaml.server_chain.smart_contract.miner by adjusting true to false.

1. Ensure the port mapping is all correct:

docker ps

This should display the container image blobber_blobber and should have the ports mapped like "0.0.0.0:5050->5050/tcp"

2. Now check whether the blobber has registered to the blockchain by running the following zbox command

./zbox ls-blobbers

In the response you should see the local blobbers mentioned with their urls for example http://198.18.0.91:5051 and http://198.18.0.92:5052

Sample Response:

- id:                    0bf5ae461d6474ca1bebba028ea57d646043bbfb6a4188348fd649f0deec5df2
  url:                   http://beta.0chain.net:31304
  used / total capacity: 14.0 GiB / 100.0 GiB
  last_health_check:	  1635347306
  terms:
    read_price:          26.874 mZCN / GB
    write_price:         26.874 mZCN / GB / time_unit
    cct:                 2m0s
    max_offer_duration:  744h0m0s
- id:                    7a90e6790bcd3d78422d7a230390edc102870fe58c15472073922024985b1c7d
  url:                   http://198.18.0.92:5052
  used / total capacity: 0 B / 1.0 GiB
  last_health_check:	  1635347427
  terms:
    read_price:          10.000 mZCN / GB
    write_price:         100.000 mZCN / GB / time_unit
    cct:                 2m0s
    max_offer_duration:  744h0m0s
- id:                    f65af5d64000c7cd2883f4910eb69086f9d6e6635c744e62afcfab58b938ee25
  url:                   http://198.18.0.91:5051
  used / total capacity: 0 B / 1.0 GiB
  last_health_check:	  1635347950
  terms:
    read_price:          10.000 mZCN / GB
    write_price:         100.000 mZCN / GB / time_unit
    cct:                 2m0s
    max_offer_duration:  744h0m0s
- id:                    f8dc4aaf3bb32ae0f4ed575dd6931a42b75e546e07cb37a6e1c6aaf1225891c5
  url:                   http://beta.0chain.net:31305
  used / total capacity: 13.3 GiB / 100.0 GiB
  last_health_check:	  1635347346
  terms:
    read_price:          26.874 mZCN / GB
    write_price:         26.865 mZCN / GB / time_unit
    cct:                 2m0s
    max_offer_duration:  744h0m0s

Note: When starting multiple blobbers, it could happen that blobbers are not being registered properly (not returned on zbox ls-blobbers).

Blobber registration takes some time and adding at least 5 second wait before starting the next blobber usually avoids the issue.

3. Now you can create allocations on blobber and store files.

Note: If unable to create new allocations as shown below.

./zbox newallocation --lock 0.5
Error creating allocation: transaction_not_found: Transaction was not found on any of the sharders

To fix this issue you must lock some tokens on the blobber.Get the local blobber id using the ./zbox ls-blobbers and use the following command

zbox sp-lock --blobber_id f65af5d64000c7cd2883f4910eb69086f9d6e6635c744e62afcfab58b938ee25 --tokens 0.5

• Your network connection depends on the block_worker url you give in the config/0chain_blobber/validator.yaml and 0chain_blobber.yaml config file.

block_worker: http://198.18.0.98:9091

This works as a dns service, You need to know the above url for any network you want to connect, Just replace it in the above mentioned file.

For example: If you want to connect to demo network

block_worker: https://demo.zus.network/dns

1. Get rid of old unused docker resources:

docker system prune

2. To get rid of all the docker resources and start afresh:

docker system prune -a

3. Stop All Containers

docker stop $(docker ps -a -q)

4. Remove All Containers

docker rm $(docker ps -a -q)