LADSPA version 0.4.17 and LV2 version 1.0.16

TAP-plugins

LADSPA version 1.0.1, LV2 version 1.0.0

Tom's Audio Processing LADSPA and LV2 plugins

Linux Studio Plugins include the following plugins in LADSPA,
 LV2, VST, VST3 and CLAP with mono (M), stereo (S), left-right (LR) and
 mid-side (MS) variants:
 <ul>
 <li>Limiter M / S</li>
 <li>Dynamic processor LR / MS / M / S</li>
 <li>Expander LR / MS / M / S</li>
 <li>Clipper (NEW in 1.2.14)</li>
 <li>Crossover x8 LR / MS / M / S</li>
 <li>Filter M / S (NEW in 1.2.8)</li>
 <li>Flanger M / S (NEW in 1.2.8)</li>
 <li>Gate LR / MS / M / S</li>
 <li>GOTT Compressor LR / MS / M / S (NEW in 1.2.8)</li>
 <li>Graphic Equalizer x16 and x32 LR / MS / M / S</li>
 <li>Impulse Response M / S</li>
 <li>Impulse Reverb M / S</li>
 <li>Sampler M / S</li>
 <li>Compressor LR / MS / M / S</li>
 <li>Artistic M / S</li>
 <li>Latency Meter</li>
 <li>Multiband expander x8 LR / MS / M / S</li>
 <li>Multiband gate x8 LR / MS / M / S</li>
 <li>Multiband clipper (NEW in 1.2.14)</li>
 <li>Multiband compressor x8 LR / MS / M / S</li>
 <li>Multiband limiter M / S (NEW in 1.2.8)</li>
 <li>Oscillator Mono</li>
 <li>Oscilloscope x1, x2 and x4.</li>
 <li>Parametric Equalizer x8 LR / MS / M / S (NEW in 1.2.14)</li>
 <li>Parametric Equalizer x16 LR / MS / M / S</li>
 <li>Parametric Equalizer x32 LR / MS / M / S</li>
 <li>Phase detector</li>
 <li>Profiler M / S</li>
 <li>Room builder M / S</li>
 <li>Multi-sampler x12 Direct out / stereo</li>
 <li>Multi-sampler x24 Direct out / stereo</li>
 <li>Multi-sampler x48 Direct out / stereo</li>
 <li>Sidechain multiband expander x8 LR / MS / M / S</li>
 <li>Sidechain multiband gate x8 LR / MS / M / S</li>
 <li>Sidechain multiband compressor x8 LR / MS / M / S</li>
 <li>Sidechain Limiter M / S</li>
 <li>Sidechain Dynamic processor LR / MS / M / S</li>
 <li>Sidechain Expander LR / MS / M / S</li>
 <li>Sidechain Gate LR / MS / M / S</li>
 <li>Sidechain Compressor LR / MS / M / S</li>
 <li>Slapback Delay M / S</li>
 <li>Spectrum Analyzer x1</li>
 <li>Spectrum Analyzer x2</li>
 <li>Spectrum Analyzer x4</li>
 <li>Spectrum Analyzer x8</li>
 <li>Spectrum Analyzer x12</li>
 <li>Spectrum Analyzer x16</li>
 <li>Trigger MIDI M / S</li>
 <li>Trigger M / S</li>
 <li>Delay Compensator M / S</li>
 <li>Delay Compensator x2 Stereo</li>
 <li>Loudness Compensator M / S (NEW in 1.1.24)</li>
 <li>Surge Filter M / S (NEW in 1.1.24)</li>
 <li>Mixer M / S (NEW in 1.2.6)</li>
 <li>Beat Breather (NEW in 1.2.10)</li>
 <li>Chorus (NEW in 1.2.16)</li>
 </ul>

<ul>
 <li>Added ISO-226:2023 loudness compensation curves to Loudness
 Compensator plugin series.</li>
 <li>Added balance knobs to LSP Slap-back Delay Stereo plugin.</li>
 <li>Added Suntory Hall Tokyo 3D model to Room Builder presets.</li>
 <li>Several AVX-512 optimizations of DSP library.</li>
 <li>Fixed not working MIDI channel setup for the Trigger MIDI plugin
 series.</li>
 <li>Fixed regression: improper port bindings for Compensation Delay x2
 Stereo plugin.</li>
 <li>Fixed several issues related to plugin window sizing for LV2 format.</li>
 <li>Fixed possible access to uninitialized memory when loading built-in
 resources.</li>
 <li>Fixed improper phase compensation between Dry and Wet channels in
 Linear Phase mode for multiband plugin series: Multiband Compressor;
 Multiband Dynamics Processor; Multiband Expander; Multiband Gate.</li>
 <li>Several bugfixes for VST3 wrapper.</li>
 </ul>

<ul>
 <li>
 Implemented Chorus plugin series.
 </li>
 <li>Implemented advanced internal buffer cleanup algorithm
 that does not cause high CPU load for Slap-Back Delay
 plugin.</li>
 <li>Added stereo correlometer to the Spectrum Analyzer
 plugin series.</li>
 <li>Added feedback to the Slap-Back delay plugin.</li>
 <li>Removed 'Amount' knob in Flanger plugin series as it can
 be fully replaced by Dry/Wet/DryWet knobs.</li>
 <li>Several fixes related to window position of VST3 plugin
 format.</li>
 <li>Workaround for Bitwig Studio DAW memory leak when VST3
 plugins extensively use messaging.</li>
 <li>Fixed bug related to improper loading of RIFF files with
 32-bit float sample format.</li>
 <li>Fixed configuration export for LV2 format where plugins
 exported paths mapped by a DAW instead of real file
 paths.</li>
 <li>Fixed Artistic Delay which could generate audio garbage
 on session startup.</li>
 <li>Improved precision of bilinear transform for filters
 which could blow up signal when using steep-curved
 filters.</li>
 <li>Fixed jumping UI controls issues caused by variable
 widths of diffrent parameters.</li>
 </ul>
 Implemented Dry/Wet balance knob for the following plugin series:
 <ul>
 <li>Artistic Delay;</li>
 <li>Beat Breather;</li>
 <li>Compensation Delay;</li>
 <li>Flanger;</li>
 <li>Impulse Responses;</li>
 <li>Impulse Reverb;</li>
 <li>Room Builder;</li>
 <li>Sampler;</li>
 <li>Multisampler;</li>
 <li>Slap-Back delay.</li>
 </ul>

<ul>
 <li>Added experimental VST3 plugin format support.</li>
 <li>Added built-in presets for Compressor plugin series.</li>
 <li>Fixed bug in smoothing mode of Parametric Equalizer and
 Filter plugins that could be caused when using large buffer
 sizes. Additional optimizations to reduce CPU resources when
 processing in smoothing mode.</li>
 <li>Updated behaviour of band frequency splits in the UI for
 Multiband Compressor, Multiband Expander, Multiband Gate
 Multiband Dynamic Processor and Crossover plugin
 series.</li>
 <li>Several bugfixes and improvements in implementations of
 VST2, LV2 and CLAP formats.</li>
 <li>Added possibility to manually enter channel name in
 Mixer plugin series.</li>
 <li>Added MIDI velocity control code display in Sampler and
 Multisampler plugin series.</li>
 <li>Added support of LR2 (12 dB/oct) filters by the
 Crossover plugins series.</li>
 <li>Added S/M Apply switch to Crossover plugin series that
 applies effect of Solo/Mute buttons to corresponding
 frequency band's outputs.</li>
 <li>Improved grid color and visibility for the Spectrum
 analyzer plugin series in Spectralizer mode.</li>
 <li>Implemented Hold option for Compressor, Dynamics
 Processor, Expander and Gate plugin series.</li>
 <li>Implemented Hold option for Multiband Compressor,
 Dynamics Processor, Expander and Gate plugin series.</li>
 <li>Added Dry/Wet balance control for Compressor, Dynamics
 Processor, Expander, Gate and Trigger plugin series.</li>
 <li>Added Dry/Wet balance control for Multiband Compressor,
 Dynamics Processor, Expander, Gate and GOTT Compressor
 plugin series.</li>
 <li>Fixed phasing issue between dry and wet signal for GOTT
 Compressor in Linear Phase mode.</li>
 <li>Fixed invalid curve markers display in Multiband Gate
 plugin series.</li>
 <li>Re-implemented allpass filters for Equalizer that could
 yield to high frequency pitch buildup.</li>
 <li>Updated split editing behaviour for Multiband plugin
 series and Crossover plugin series.</li>
 <li>Added basic UI design guidelines to the
 documentation.</li>
 <li>Several bugfixes in graphic toolkit library.</li>
 </ul>

<ul>
 <li>Implemented Clipper plugins series.</li>
 <li>Implemented Multiband Clipper plugin series.</li>
 <li>Implemented Parametric Equalizer x8 plugin series.</li>
 <li>Updated VST 2.x plugin naming to fit the maximum possible
 length of 31 characters.</li>
 <li>Added tracking of maximum values option for Spectrum
 Analyzer plugin series.</li>
 <li>Added possibility to change frequency values by double
 click for GOTT Compressor.</li>
 <li>Improved performance of expression language in the
 UI.</li>
 <li>Implemented separate input and output signal spectrum
 analysis for Filter, Graphic Equalizer and Parametric
 Equalizer plugin series.</li>
 <li>Updated default value and extended range of the zoom
 fader for Filter, Graphic Equalizer and Parametric Equalizer
 plugin series.</li>
 <li>Added possibility to globally adjust filter point size
 for Filter, Graphic Equalizer and Parametric Equalizer plugin
 series.</li>
 <li>Added gain level display for filter info of the
 Parametric Equalizer and Filter plugin series.</li>
 <li>Added missing inline display to the Autogain plugin
 series.</li>
 <li>Threshold markers are now editable for all dynamics and
 multiband dynamics plugins.</li>
 <li>Implemented switch that controls automatic scaling of
 spectrum graph for plugin series:</li>
 <li>- Beat Breaher.</li>
 <li>- Filter.</li>
 <li>- GOTT Compressor.</li>
 <li>- Graphic Equalizer.</li>
 <li>- Multiband Compressor.</li>
 <li>- Multiband Dynamic Processor.</li>
 <li>- Multiband Gate.</li>
 <li>- Multiband Expander.</li>
 <li>- Multiband Limiter.</li>
 <li>- Noise Generator.</li>
 <li>- Parametric Equalizer.</li>
 <li>Many code updates that could cause potential problems
 related to using another decimal point for floating-point
 number formatting.</li>
 <li>Added frequency and note displaying for band splits for
 all multiband plugin series.</li>
 <li>Added support of storing current file type selection in
 file dialogs of UI.</li>
 <li>Optimization of compressor and gate functions using
 AVX-512 instruction set.</li>
 <li>Fixed bug in Mid/Side conversion functions for AArch64
 architecture (contributed by marcan at GitHub).</li>
 <li>Introduced SIMD-optimized expander curve and gain
 functions.</li>
 <li>Improved performance of logarithmic values calculations
 for DSP modules.</li>
 </ul>

Linux Studio Plugins LADSPA/LV2/VST/VST3/CLAP

<ul>
 <li>Fix a few minor metadata issues.</li>
 <li>Fix initial noise with Piano (zero comb filter and voices on startup).</li>
 <li>Fix invalid Vocoder preset description.</li>
 <li>Fix misleading indentation warnings with GCC 6.</li>
 <li>Update build system.</li>
 <li>Use rdfs:label for port groups.</li>
 </ul>

ZamAudio is a set of LADSPA/LV2/VST/VST3/CLAP audio
 plugins:
 <ul>
 <li>ZaMaximX2: brickwall limiter</li>
 <li>ZamAutoSat: automatic saturation</li>
 <li>ZamComp and ZamCompX2: compressor, mono and stero</li>
 <li>ZamEQ2: 2 bands parametric equalizer</li>
 <li>ZamGEQ31: 31 band graphic equalizer</li>
 <li>ZamHeadX2: HRTF acoustic filtering</li>
 <li>(NEW in 4.3) ZamNoise: noise reduction based on Gnome Wave Cleaner</li>
 <li>ZamPhono: phono filters for restoring vinyl</li>
 <li>ZamGate and ZamGateX2: gate mono and stereo</li>
 <li>ZamTube: distortion effect modeled after tone stacks from guitar amplifiers</li>
 <li>ZamDelay: feedback delay unit</li>
 <li>ZamDynamicEQ: dynamic equalizer</li>
 <li>ZaMultiComp and ZaMultiCompX2: multiband compressor, mono and stereo</li>
 <li>ZamSynth: experimental synthesizer</li>
 </ul>

ZamPlugins

<ul>
 <li>New plugin: ZamNoise noise reduction based on Gnome
 Wave Cleaner, uses Ephriam / Malah noise suppression
 algorithm from 1984</li>
 <li>Tweak defaults and ranges on ZamEQ2</li>
 <li>Make ZaMaximX2 threshold/gain controls more
 usable</li>
 </ul>

<ul>
 <li>ZamTube: Introduced both sides of 12AX7 valve
 emulation with tonestack sandwiched between the
 valves.</li>
 <li>ZamHeadX2: Fixed bug with wrong array dimensions.</li>
 <li>Fix VST2 param bug and other improvements.</li>
 </ul>

ZamAudio Plugins LADSPA/LV2/VST/VST3/CLAP

Calf

CAPS

These are the LV2 Plugins.
 
 
 Guitarix is a virtual guitar amplifier for Linux.
 
 
 Guitarix takes the signal from your guitar as any real amp would
 do: as a mono-signal from your sound card. The input is processed
 by a main amp and a rack-section. Both can be routed separately
 and deliver a processed stereo-signal via Jack. You may fill the
 rack with effects from more than 25 built-in modules including
 stuff from a simple noise gate to brain-slashing modulation f/x
 like flanger, phaser or auto-wah.
 
 
 Your signal is processed with minimum latency. On any properly
 set-up Linux-system you don't have to wait more than 10ms until
 your sound is processed by guitarix.

Guitarix LV2

ZynAddSubFx Synthesizer

ZynAddSubFx (with Zyn-Fusion UI) DSSI/LV2/VST plugins

Helm Synthesizer

avldrums.lv2 is a drum sample player plugin dedicated to Glen
 MacArthur's AVL Drumkits. This self-contained plugin provides a
 convenient way to rapidly sequence and mix midi-drums.
 
 
 The AVLdrums comes as four separate drumkits: Black Pearl, Red
 Zeppelin, the Blonde Bop kit played with regular sticks and
 Blonde Bop Hot Rods played with rute sticks. There are 5
 velocity layers for each of the 28 kits pieces or drum-zones for
 both kits.
 
 Include the following kits:
 <ul>
 <li>Red Zeppelin</li>
 <li>Black Pearl</li>
 <li>Blonde Bop</li>
 <li>Blonde Bop Hot Rod</li>
 </ul>

AVLDrums.lv2

Darken Buskman's GUI background

Added Blonde Bop drumkits.

Surge XT is an Hybrid Synthesizer
 Featuring many synthesis techniques, a great selection of
 filters, a flexible modulation engine, a smorgasbord of effects,
 and modern features like MPE and microtuning.
 This is the VST3/CLAP plugins version.

Surge XT Synthesizer VST3/CLAP

<ul>
 <li>Add TouchOSC template download link</li>
 <li>Do the same select trick on TypeAhead</li>
 <li>Quit on Linux CLI with OSC works properly</li>
 <li>Patch updates</li>
 </ul>

Surge XT synthesizer and effects VST3/CLAP plugins

This collection of LV2 plugins contains:
 <ul>
 <li>balance.lv2 (0.7.0): Stereo balance</li>
 <li>controlfilter.lv2 (0.5.1): filter/process Control Parameters</li>
 <li>darc.lv2 (0.7.0): Dynamic Audio Range Compressor</li>
 <li>dpl.lv2 (0.7.0): Digital Peak Limiter</li>
 <li>fat1.lv2 (0.8.7): AutoTune-1 auto-tuner based on Fons Adriaensen's zita-at1</li>
 <li>fil4.lv2 (0.8.8): 4 band Parametric Equalizer</li>
 <li>matrixmixer.lv2 (0.4.7): a matrix mixer</li>
 <li>meters.lv2 (0.9.26): Audio Level Meters</li>
 <li>mididebug.lv2 (0.3.4): MIDI Message Generator</li>
 <li>midifilter.lv2 (0.7.2): Filter MIDI events</li>
 <li>midigen.lv2 (0.4.2): Midi Event Generator</li>
 <li>midimap.lv2 (0.4.4): Midi Event Mapper</li>
 <li>mixtri.lv2 (0.4.11): a matrix mixer and trigger processor</li>
 <li>nodelay.lv2 (0.6.3): a simple audio delay-line</li>
 <li>onsettrigger.lv2 (0.4.3): audio to midi converter currently intended for Bass/Kick-drums</li>
 <li>phaserotate.lv (0.6.6): audio file phase rotator</li>
 <li>sisco.lv2 (0.9.11): simple audio oscilloscope</li>
 <li>spectra.lv2 (0.6.6): Spectr Spectrum Analyzer</li>
 <li>stepseq.lv2 (0.6.14): 8x8 Midi Step Sequencer</li>
 <li>stereoroute.lv2 (0.2.3): versatile stereo to mono downmix utility</li>
 <li>testsignal.lv2 (0.7.0): audio-plugin for generating test-signals</li>
 <li>tuna.LV2 (0.6.6): musical instrument tuner with strobe characteristics</li>
 <li>xfade.lv2 (0.3.5): audio plugin for stereo cross-fading 2 x 2 input channels to 2 output channels</li>
 <li>zconvo.lv2 (0.6.8): plugin to convolve audio signals</li>
 </ul>

x42Plugins

<ul>
 <li>Better UI scaling</li>
 <li>balance.lv2 0.7.0</li>
 <li>darc 0.7.0: Fix inplace processing.</li>
 <li>dpl 0.7.0</li>
 <li>fat1 0.8.8</li>
 <li>fil4 0.8.9: Fix in-place processing 1in, 2out.</li>
 <li>matrixmixer 0.4.7</li>
 <li>meters 0.9.26: VU: Increase contrast of inline-display
 red/green needles.</li>
 <li>mixtri 0.4.11</li>
 <li>phaserotate 0.6.6</li>
 <li>robtk 0.8.5</li>
 <li>sisco 0.9.11</li>
 <li>spectra 0.6.6</li>
 <li>stepseq 0.6.14</li>
 <li>testsignal 0.7.0</li>
 <li>tuna 0.6.6</li>
 </ul>

midifilter.lv2 0.7.3 : Properly constrain CC2Note mode control #36
 dpl.lv2 0.6.6
 fat1.lv2 0.8.7
 fil4.lv2 0.8.8
 phaserotate.lv2 0.6.5
 zconvo.lv2 0.7.1

fat1.lv2 0.8.6: reduce jitter and fix latency.
 zconvo.lv2 0.6.8: Fix loading custom files.

DISTRHO-Ports LV2, VST and VST3 plugins includes:
 <ul>
 <li>Artican: The Function and The Pilgrim</li>
 <li>Dexed: Synth that is closely modeled on the Yamaha DX7.</li>
 <li>dRowAudio: Distortion, Distortion Shaper, Flanger, Reverb, Tremolo.</li>
 <li>EasySSP: Easy Sound Space Perception audio visualization tool.</li>
 <li>HiReSam: Spectrum Analyzer.</li>
 <li>JuceOPL: Classic game sounds synthesizer.</li>
 <li>Juced: DrumSynth and EQinox.</li>
 <li>KlangFalter: A convolution audio plugin.</li>
 <li>LUFS Meter: Measures loudness similar to the human perception of loudness.</li>
 <li>Luftikus: Analog EQ with fixed half-octave bands and additional high frequency boost.</li>
 <li>Obxd: Emulation of famous ob-x, ob-xa and ob8 synths.</li>
 <li>PitchedDelay: Delay that allow pitching the delayed signal.</li>
 <li>ReFine: Add a final polishing to your tracks, busses and masters.</li>
 <li>Stereo Source Separator: Uses the spatial information hidden in the stereo signal for source separation.</li>
 <li>(NEW) SwankyAmp: A tube amplifier simulation DSP plugin
 which aims to capture the details in the dynamics of tube
 amplifiers.</li>
 <li>TAL Plugins: Dub-3, Filter, Filter-2, NoiseMaker, Reverb, Reverb-2, Reverb-3 and Vocoder-2.</li>
 <li>Temper: modern digital distortion.</li>
 <li>Vex: A 3 oscillator subtractive waverom synth.</li>
 <li>(NEW) Vitalium: A Spectral warping wavetable synth.</li>
 <li>Wolpertinger: Subtractive, antialiased polyphonic software synthesizer.</li>
 </ul>

DISTRHO-Ports

<ul>
 <li>Add SwankyAmp</li>
 <li>Add Vitalium</li>
 <li>Fix up LV2 wrapper with juce-current</li>
 <li>Sync juce-current with latest juce</li>
 <li>Tweak build system to drop a few run-time dependencies for juce-current</li>
 <li>Removed CHOW</li>
 </ul>

<ul>
 <li>Fix out of bounds buffer write in drowaudio-reverb
 (leading to memory corruption and/or crashes)</li>
 <li>Fix lv2 export preset meta-data validation</li>
 <li>Fix lv2 ttl generation when cross-compiling (e.g. using
 mingw and wine within linux)</li>
 <li>Fix exported symbols</li>
 <li>Fix build/compatibility with macOS 11 / arm64</li>
 </ul>

<ul>
 <li>Add CHOW plugin (used to test updated JUCE)</li>
 <li>Include new and legacy JUCE in source code (legacy JUCE
 will only receive bug-fixes)</li>
 <li>Rebase DISTRHO-Ports patches against JUCE6 codebase,
 available in libs/juce-current/patches</li>
 <li>Fix LV2 wrapper to build against latest JUCE</li>
 <li>General cleanup to build system</li>
 </ul>

<ul>
 <li>Add HiReSam plugin port</li>
 <li>Add ReFine plugin port</li>
 <li>Add Temper plugin port</li>
 <li>Fix build for ARM NEON target</li>
 <li>Fix LV2 UI notifications happening in non-GUI thread</li>
 <li>Fix LV2 meta-data to pass lv2lint errors</li>
 <li>Update JUCE (current plugins frozen in a known good but slightly old version, with cherry-picked fixes)</li>
 <li>Switch build system from premake3 to meson</li>
 </ul>

sfizz

<ul>
 <li>Updated the engine to 1.2.3</li>
 <li>Various sound fixes: gain, notes conflict, aftertouch</li>
 </ul>

Added
 <ul>
 <li>WavPack support (#1129 by @lucianoiam)</li>
 </ul>
 Changed
 <ul>
 <li>The project has been split into 2 repositories to
 separate the library from the UI/plugins. (#1162)</li>
 <li>Unclamp the cutoff and add OSC queries for the cutoff
 modifiers (#1100 by @PythonBlue)</li>
 <li>Update cpuid, dr_libs and stb_vorbis libraries
 (#1164)</li>
 <li>Configurable amount of Control Change messages via
 CMake' MIDI_CC_COUNT variable,</li>
 </ul>

sfizz is a sample-based musical synthesizer LV2/VST3 plugin

Surge Synthesizer

GM Synth

Extend MIDNAM: show drum note-names for drumkits

Dragonfly Reverb is a bundle of free audio effect plugins (LV2, CLAP, VST and VST3).
 <ul>
 <li>Dragonfly Hall Reverb is a free stereo-to-stereo reverb
 effect. It is primarily intended for use as a concert hall
 reverb. It also has numerous smaller presets representing
 rooms, studios, and chambers. It is based on Hibiki Reverb
 from Freeverb3VST, which uses Moorer's early reflection model
 and a modified FDN allpass Zita reverb.</li>
 <li>Dragonfly Room Reverb is a free stereo-to-stereo reverb
 effect. It has several different room presets, as well as a
 small number of hall presets and effect presets. It is based
 on ProG Reverb from Freeverb3VST, which uses Moorer's early
 reflection model and an implementation of Jon Dattorro's
 Progenitor Reverb algorithm.</li>
 <li>Dragonfly Plate is a free mono-to-stereo reverb plugin
 based on NVerb and STRev from Freeverb3 VST.</li>
 <li>Dragonfly Early Reflections is a free stereo-to-stereo
 reverb effect based on Moorer's early reflection model as
 implemented in Freeverb3 VST. This is the same algorithm used
 in Dragonfly Hall and Dragonfly Room, but without any late
 reverberation algorithm.</li>
 </ul>

DragonflyReverb

Disable denormals during all DSP

<ul>
 <li>Fix bug in which setting predelay to zero does not
 update dsp predelay</li>
 <li>Update to latest DPF - fixes CLAP on Linux</li>
 </ul>

Dexed

<ul>
 <li>MTS-ESP microtuning support</li>
 <li>CLAP plugin support (sadly scaling is not available for now, but we are working on this)</li>
 <li>Scalable UI upgrade (better resolution), optimized UI redraw</li>
 <li>More accurate VU meter.</li>
 <li>Fix for VST3 automation (again)</li>
 </ul>

<ul>
 <li>Fix VST3 automation issues.</li>
 <li>Fix to apply UI scaling only when applicable.</li>
 <li>Fix hang notes on program changes.</li>
 </ul>

<ul>
 <li>Added support for SCL/KBM microtuning</li>
 <li>Added initial support for MPE performance</li>
 <li>A Collection of small UI changes, including higher
 contrast GUI assets, better sub-window management, and mouse
 wheel support</li>
 <li>UI can be scaled to 150%; work in progress</li>
 <li>Better accuracy on DX7 envelopes</li>
 <li>VST3 support</li>
 </ul>
 VST2 has been dropped because of licensing issues. Because
 of this the previous version is still included in this
 flatpak.

GxPlugins contain the following Guitar effects plugins
 # = Includes master bypass
 * = The product names modeled in this software are trademarks
 of their respective companies that do not endorse and are not
 associated or affiliated with this simulation. All trademarks are
 the property of their respective holders.
 Includes the following overdrive pedals:
 <ul>
 <li>GxBaJaTubeDriver.lv2# - Based on the BaJaTubeDriver*</li>
 <li>GxBoobTube.lv2# - Based on the Boob Tube*</li>
 <li>GxBottleRocket.lv2# - Based on the Mesa V1 Bottle Rocket* tube overdrive</li>
 <li>GxClubDrive.lv2# - Overdrive Pedal Simulation based on a
 EF86 Pentode Valve Simulation.</li>
 <li>GxDOP250.lv2# - Based on the Analog Man DOD OD-250 Yellow Overdrive*</li>
 <li>GxEternity.lv2# - Low compression overdrive pedal</li>
 <li>GxGuvnor.lv2 - Based on the Marshall "The Guv'nor" Overdrive*</li>
 <li>GxHotBox.lv2# - Based on the Matchless Hot Box* tube overdrive</li>
 <li>GxLuna.lv2# - Gnarly overdrive pedal simulation</li>
 <li>GxSD1.lv2# - Based on the Boss SD-1 Super Overdrive*</li>
 <li>GxSD2Lead.lv2# - Based on the Boss SD-2 Dual Overdrive*</li>
 <li>GxShakaTube.lv2# - Based on the ShakaTube*</li>
 <li>GxSloopyBlue.lv2# - Overdrive pedal simulation</li>
 <li>GxTimRay.lv2# - Based on the Vemuram Jan Ray*</li>
 <li>GxValveCaster.lv2# - Based on the Valve Caster*</li>
 </ul>
 Includes the following Fuzz/Distortion pedals:
 <ul>
 <li>GxAxisFace.lv2# - Based on the Axis Face Silicon* fuzz</li>
 <li>GxFz1b.lv2# - Based on the Robert Moog-designed Maestro FZ-1B* fuzz</li>
 <li>GxFz1s.lv2# - Based on the Maestro FZ-1S Super-Fuzz*</li>
 <li>GxHyperion.lv2 - Based on the Devi Ever FX Hyperion* fuzz</li>
 <li>GxHeathkit.lv2# - Based on the Heathkit TA-28* distortion/booster/fuzz</li>
 <li>GxKnightFuzz.lv2# - Based on the Basic Audio Knight Fuzz* fuzz</li>
 <li>GxLiquidDrive.lv2# - Based on the Liquid Drive* fuzz, a
 modified Ross Distortion*</li>
 <li>GxSuppaToneBender.lv2 - Based on the Vox Supa Tonebender* fuzz</li>
 <li>GxSaturator.lv2 - Based on the Joe Satriani-specified Vox
 Satchurator* distortion</li>
 <li>GxSunFace.lv2# - Based on the Analog Man Sun Face* fuzz</li>
 <li>GxSuperFuzz.lv2 - Based on the Univox Super-Fuzz*</li>
 <li>GxToneMachine.lv2 - Based on the Foxx Tone Machine* fuzz</li>
 <li>GxTubeDistortion.lv2# - Generic tube distortion based on
 Tube Distortion by Ron Black</li>
 <li>GxVintageFuzzMaster.lv2 - Based on the Devi Ever Vintage Fuzz Master*</li>
 <li>GxVoodoFuzz.lv2 - Based on the Voodoo Lab SuperFuzz*. It's
 basically a Bosstone* circuit, followed by the tone control of the
 Foxx Tone Machine* in parralel with a Devi Ever Dark Boost*.</li>
 </ul>
 Includes the following amplifiers:
 <ul>
 <li>GxBlueAmp.lv2# - Single - ended head amplifier simulation
 inspired by late 1950s Fender “Princeton” and “Champ” amplifier
 designs, it delivers tight bass, clean mids and highs.</li>
 <li>GxCreamMachine# - Based on different circuits * Poweramp</li>
 <li>GxEpic.lv2# - Based on Valve Junior*</li>
 <li>GxMicroAmp.lv2# - A simple booster</li>
 <li>GxPlexi.lv2# - Power Amp simulation * Poweramp</li>
 <li>GxSupersonic.lv2# - Based on different circuits * Poweramp</li>
 <li>GxSVT.lv2# - Based on the Ampeg SVT-CL Bass Head*</li>
 <li>GxUvox720k - Based on Univox 720k keyboard amp from 1978</li>
 <li>GxVBassPreAmp.lv2# - Simulation of the 1984 Vox Venue Bass
 100 Pre Amp* section</li>
 <li>GxVmk2.lv2 - Based on Vox MKII* solid state preamp of the late 60s</li>
 </ul>
 Also includes other effects:
 <ul>
 <li>GxQuack.lv2# - Autowah</li>
 <li>GxSlowGear.lv2 - Based on the Boss Gx SlowGear*,
 attack-smoothing, auto-swelling pedal of the early 80s</li>
 <li>GxUltraCab.lv2# - Cabinet simulator pedal</li>
 </ul>

GxPlugins

Fix issue with ON/OFF toggle buttons.

<ul>
 <li>Fix Do not hard-pin ld.</li>
 <li>Fix LV2UI_Descriptor.</li>
 </ul>

KapitonovPluginsPack contains the following LADSPA/LV2/VST3 plugins
 to customize your guitar tones:
 
 <ul>
 <li>
 tubeAmp: Advanced guitar tube amp emulator. Contains preamp,
 tonestack, power amp with voltage sag, cabinet
 emulators. Emulation parameters of each component are set by
 profile files. LV2 only.
 </li>
 <li>
 Bluedream: Booster/Tube Screamer pedal with equalizer
 (tonestack). LV2 version has GUI.
 </li>
 <li>Distruction: Distortion pedal with equalizer (tonestack). LV2 version has GUI.</li>
 <li>Fuzz: Vintage fuzz pedal. LV2 version has GUI.</li>
 <li>Deadgate: Effective Noise Gate/Dead Zone effect plugin.</li>
 <li>Octaver: Analog octaver pedal.</li>
 <li>
 Single2Humbucker: Plugin for emulation humbucker pickup
 sound with single coil pickup on the guitar. Useful for playing
 heavy-metal on Stratocaster guitar with single coil
 pickups.
 </li>
 </ul>

KapitonovPluginsPack

This release tested with Ardour 6.0 and brings back broken since 1.1 GUI with Qtractor!
 Changes:
 <ul>
 <li>Added a built-in file picker dialog which replaces zenity.</li>
 <li>Changed the models of Fuzz and Distortion plugins, now they emulate.</li>
 <li>FuzzFace and Boss DS-1 pedals.</li>
 <li>Added new profiles for tubeAmp.</li>
 <li>Fixed bug with GUI plugins in Qtractor.</li>
 </ul>

KapitonovPluginsPack Guitar amp LADSPA/LV2/VST3 plugins

This collection of LADSPA, DSSI, LV2, CLAP, VST and VST3 plugins contains:
 <ul>
 <li>Mini-Series: 3-Band EQ, 3-Band splitter, Ping Pong Pan
 (LADSPA, LV2, CLAP, VST and VST3).</li>
 <li>Max-Gen samples: MaBitcrush, MaFreeverb, MaGigaverb,
 MaPitchshift (LADSPA, LV2, CLAP, VST and VST3).</li>
 <li>MVerb: Studio quality reverb (LADSPA, LV2, CLAP, VST and
 VST3).</li>
 <li>ndc-Plugs: Amplitude Imposer, Cycle Shifter, SouForce
 (LADSPA, LV2, CLAP, VST and VST3).</li>
 <li>Nekobi: simple single-oscillator synth based on Roland
 TB-303 (DSSI, LV2, CLAP, VST and VST3).</li>
 <li>Kars: Simple karplus-strong plucked string synth (DSSI, LV2,
 CLAP, VST and VST3).</li>
 <li>glBars: An OpenGL bars visualization plugin (LV2, CLAP, VST
 and VST3).</li>
 <li>ProM: An awesome music visualizer (LV2, CLAP, VST and
 VST3).</li>
 </ul>

DPF-Plugins

<ul>
 <li>Fix build with clang on non-macOS systems</li>
 <li>Fix CLAP plugins not saving state under Bitwig</li>
 <li>Fix Nekobi tuning parameter</li>
 </ul>

<ul>
 <li>Initial CLAP support</li>
 <li>Stabilize VST3 support</li>
 <li>Set audio port configuration for all plugins</li>
 <li>Set VST3 categories in a few more plugins</li>
 <li>Update to latest DPF</li>
 </ul>
 Plugin specific changes:
 <ul>
 <li>Kars: Fix playback after a sample rate change</li>
 <li>Nekobi: Fix deadlock when receiving a MIDI message bigger than 3 bytes</li>
 <li>Nekobi: Make waveform slider behave as a button</li>
 <li>ProM: Fix invalid context (GL compat instead of GL3) in some setups</li>
 <li>ProM: Force keyboard focus on click</li>
 </ul>

<ul>
 <li>Initial experimental VST3 support</li>
 <li>Add bottom-right resize handle in glBars and ProM, needed
 in plugin formats that can't do host-side resizing (ProM resize
 handle is invisible but still works, known issue)</li>
 <li>Some plugin GUIs can use Cairo instead of OpenGL, if OpenGL is not
 available at build time</li>
 <li>Standalones no longer require JACK, instead detecting at runtime
 if it is available</li>
 <li>Standalones will now use RtAudio for native audio device access in
 case JACK is not available</li>
 <li>ProM now ships with (optional) vendored libprojectM in case it is
 not available as system library</li>
 <li>ProM now sets up and uses OpenGL3 context instead of OpenGL2 forward
 compatibility mode, fixing usage on macOS and Windows</li>
 <li>Fix modal about dialogs</li>
 <li>Fix more High-DPI related issues</li>
 <li>Fix OpenGL context swap on GUI deletion, needed on hosts using OpenGL</li>
 </ul>

DPF:
 <ul>
 <li>Auto-detect compiler target, fixing as-is build with ARM systems</li>
 <li>Allow to use EXE_WRAPPER as makefile option, to help cross-compilation</li>
 <li>Fix build with headers in custom path</li>
 <li>Fix "make install" for macOS and Windows</li>
 <li>Fix exported LV2 metadata to pass checks/validation</li>
 <li>Make mouse-wheel delta independent of window size</li>
 </ul>
 Kars:
 <ul>
 <li>Fix audio buffer reuse, causing bad audio in some hosts</li>
 </ul>
 Nekobi:
 <ul>
 <li>Set default MIDI CC for all parameters</li>
 </ul>

DPF-Plugins LADSPA/DSSI/LV2/CLAP/VST/VST3

Yoshimi

Yoshimi, a sophisticated soft-synth LV2 plugin

Geonkick is a synthesizer capable of producing various
 percussion elements. The most basic examples are: kicks, snares,
 hi-hats, shakers, claps.

Geonkick

Fixes
 <ul>
 <li>fix linking VST3 against wrong Redkite library path</li>
 <li>fix conversion from frequency to note (more fixes)</li>
 <li>fix shortcut for hide/show envelope</li>
 </ul>
 New features
 <ul>
 <li>set manually the exact value of envelope points</li>
 <li>display the current envelope point coordinates (value, time)</li>
 </ul>
 Improvements
 <ul>
 <li>improve the precision for saving into presets</li>
 </ul>

(UI) Fix conversion from frequency to note in the frequency envelope graph.

Fix crash in Reaper for LV2.

Wolf Shaper is a waveshaper plugin with a graph editor, in LV2, VST, VST3 and CLAP.

WolfShaper

Fix an issue with the Warp parameters (in some cases,
 modifying the warp type would appear to have no effect in the
 user interface)

<ul>
 <li>Fix dsp/gui inconsistencies and improve generic UI.</li>
 <li>Fix missing VST3 plugin categories.</li>
 <li>Set CLAP 'plugin features'.</li>
 <li>Set the UI as 'user resizable'.</li>
 </ul>

<ul>
 <li>VST3 and CLAP support.</li>
 <li>High-DPI support.</li>
 <li>Rework the context menu so that it does not create a separate window.</li>
 </ul>

<ul>
 <li>Context menu improvements.</li>
 <li>The UI does not try to remember its size anymore (this
 would cause some issues in some hosts, such as #126).</li>
 </ul>

Ninjas2

DrumGizmo

<ul>
 <li>Default midimaps now read from drumkit file.</li>
 <li>Sample selection default values improved.</li>
 <li>New powermap feature.</li>
 <li>Add gettext support to plugin UI with French translation.</li>
 <li>Per instrument voice limit feature.</li>
 </ul>

White Elephant Audio plugins are:
 <ul>
 <li>Songbird Formant Filter (v2.3.0): provides two formant filters and
 an LFO modulated blend control between the two.</li>
 <li>Richter Tremolo (v2.2.1): tremolo plugin featuring four
 tempo sync-able LFOs, two of which modulate the signal
 directly, whilst the other two modulate the previous two
 LFOs</li>
 <li>Carve Distortion (v2.6.0): two stage wave shaping
 distortion, with multiple wave shapes and
 serial/parallel/stereo routing options.</li>
 <li>MONSTR Stereo Imaging (v2.1.3): multiband stereo imaging
 plugin that allows the user to control the stereo width of a
 sound in 3 different frequency bands, and so can be used to
 perform common tasks such as narrowing the bass frequencies
 while adding width to the highs.</li>
 </ul>

WhiteElephantAudio

Tunefish is a very tiny virtual analog synthesizer. It is
 developed to fit into about 10kb of compressed machine code
 while still producing an audio quality that can compete with
 commercial synthesizers.

Tunefish4

ADLplug OPL/OPN

ADLplug OPL3/OPN2 soundchip FM Synthesizer LV2/VST plugin

This is the VST3 plugins package for SonoBus.
 
 
 SonoBus is an application for streaming high-quality, low-latency peer-to-peer
 audio between devices over the internet or a local network.
 
 
 Features:
 
 
 Connects multiple users together to send and receive audio among all in a group,
 with fine-grained control over latency, quality and overall mix. Includes optional
 input compression, noise gate, and EQ effects, along with a master reverb.
 
 
 All settings are dynamic, network statistics are clearly visible.
 Works as a standalone application on macOS, Windows, iOS, and GNU/Linux, and as
 an audio plugin (VST3). Use it on your desktop
 or in your DAW, or on your mobile device.
 
 
 Easy to setup and use, yet still provides all the details that audio nerds want to see.
 Audio quality can be instantly adjusted from full uncompressed PCM (16, 24, or 32 bit)
 or with various compressed bitrates (16-256 kbps per channel) using
 the low-latency Opus codec.

SonoBus VST3

Free and open source network audio streaming, VST3 plugins

Fabla is an open-source LV2 drum sampler plugin
 instrument. It is ideal for loading up your favorite sampled
 sounds and bashing away on a MIDI controller. Or if it’s crafty
 beat programming your after that’s cool too! The ADSR envelope
 allows the shaping of hi-hats and kicks while the compressor
 beefs up the sound for thumping kicks!

Fabla

Fabla LV2 drum sampler plugin instrument.

ArtyFX

VL1Emulator

An emulator of Casio VL-Tone VL1 as LV2 plugin

setBfree

Fix upper manual key-split
 Fix MIDNAM (pedal CC, PC)

setBfree DSP Tonewheel Organ emulator LV2

So Synth LV2

Sorcer

Sorcer polyphonic wavetable synth LV2 plugin

reMID

OB-Xd is a software synthesizer attempting to recreate the
 sound of the Oberheim OB-X syntehsizer.
 Available as LV2 and VST3 plugins.

OBXd

ChowTapeModel

Physical modelling signal processing for analog tape recording, LV2/CLAP/VST3 Plugin

Stochas is a probabilistic polyrhythmic sequencer. This is the
 VST3 and CLAP plugins.

Stochas VST3/CLAP

"Fire" is a multi-band distortion plugin. It supports preset
 save, multi-band distortion, downsample, eq, etc.
 
 This is the VST3 plugin.

Fire Distortion

Cardinal

Cardinal is a free and open-source LV2/VST/VST3/CLAP virtual modular synthesizer plugin

Airwindows LV2 is a port to Linux LV2 of the Airwindows
 plugins by Chris Johnson

Airwindows

This release contains the following new plugins:
 <ul>
 <li>ADClip8</li>
 <li>Air2</li>
 <li>Air3</li>
 <li>CrunchyGrooveWear</li>
 <li>Overheads</li>
 <li>Pop</li>
 <li>Pop2</li>
 <li>PurestFade</li>
 </ul>
 Fixes in Console6

This release contains the following new plugins:
 <ul>
 <li>ConsoleLABuss</li>
 <li>ConsoleLAChannel</li>
 <li>Drive</li>
 <li>FinalClip</li>
 <li>Hull2</li>
 <li>kPlateA</li>
 <li>kPlateB</li>
 <li>kPlateC</li>
 <li>kPlateD</li>
 <li>Luxor</li>
 <li>PurestConsole3Buss</li>
 <li>PurestConsole3Channel</li>
 <li>RawGlitters</li>
 <li>RawTimbers</li>
 <li>Reverb</li>
 <li>ShortBuss</li>
 <li>TPDFDither</li>
 <li>XLowpass</li>
 <li>ZOutputStage</li>
 </ul>

This release contains the following new plugins:
 <ul>
 <li>BassAmp</li>
 <li>BassDrive</li>
 <li>BassKit</li>
 <li>BigAmp</li>
 <li>Cabs</li>
 <li>FireAmp</li>
 <li>Flipity</li>
 <li>GrindAmp</li>
 <li>LeadAmp</li>
 <li>MidAmp</li>
 <li>ResEQ</li>
 <li>ResEQ2</li>
 <li>Sinew</li>
 </ul>

This release contains the following new plugins:
 <ul>
 <li>Creature</li>
 <li>Inflamer</li>
 <li>Point</li>
 <li>ToTape5</li>
 </ul>

Automatic audio mastering plugin for live-streaming,
 podcasting and internet radio stations.
 
 
 master_me is a multi platform, free and open source audio
 plug-in which optimizes sound in live streaming
 situations. Introducing no latency, it takes care of master
 levels and ‘polishes’ the sound with a chain of effects,
 closely modeled after the audio chain of Klaus Scheuermann’s
 mastering studio in Berlin, Germany.
 
 
 Although tempting, it is NOT intended to automatically master
 your produced music. Your art deserves closer, offline
 attention.

master_me

master_me audio mastering VST/VST3/LV2 plugin

Include the following GuitarML VST3 plugins
 <ul>
 <li>Chameleon v1.2</li>
 <li>PrincePedal v1.0 (x86_64 only)</li>
 <li>Proteus v1.2</li>
 <li>Smart Amp v1.3</li>
 <li>Smart Pedal v1.5</li>
 <li>TS-M1N3 pedal v1.2</li>
 </ul>

GuitarML

GuitarML Amplifier and Pedals VST3 plugins

BYOD (Bring Your Own Distortion) is a guitar distortion plugin
 with a customisable signal chain that allows users to create
 their own guitar distortion effects. The plugin contains a wide
 variety of distortion effects from analog modelled circuits to
 purely digital creations, along with some musical tone-shaping
 filters, and a handful of other useful processing blocks.
 
 
 This is the plugins package in LV2/VST3/CLAP.

BYOD

<ul>
 <li>Added "Laser Trem" module.</li>
 <li>Added "Poly Octave" module.</li>
 <li>Added "Tempo Sync" options for Delay module.</li>
 <li>Added a "Mix" parameter for Phaser4 module.</li>
 <li>Improved DSP performance for many of the modules.</li>
 <li>Improved memory-efficiency for Spring Reverb module.</li>
 <li>Improved handling of NaN inputs.</li>
 <li>Improved preset searching.</li>
 <li>Fixed host parameter automation not working in some cases.</li>
 <li>Fixed user presets not always showing in alphabetical order.</li>
 </ul>

<ul>
 <li>Added "Flapjack" module.</li>
 <li>Added "Fuzz Machine" module.</li>
 <li>Added "Mouse Drive" module.</li>
 <li>Added "Crying Child" module.</li>
 <li>Added "Krusher" module.</li>
 <li>Added "Solo-Vibe" module.</li>
 <li>Added "Ladder Filter" module.</li>
 <li>Added "MIDI Modulator" and "Param Modulator"
 modules.</li>
 <li>Added level tracking input and output ports for relevant
 modules.</li>
 <li>Added "netlist view" to allow for customization of some
 circuit-modelled modules.</li>
 <li>Added AVX support (for PCs that support it) for neural network-based modules.</li>
 <li>Added mouse interactions for selecting and
 moving/deleting multiple modules at once.</li>
 <li>Added port tooltips.</li>
 <li>Added sample rate correction filter for GuitarML
 module.</li>
 <li>Added support for CLAP preset discovery and preset
 loading.</li>
 <li>Improved preset search results.</li>
 <li>Improved custom IR loading/saving for "Amp IRs"
 module.</li>
 <li>Improved IR menu UX with mouse and keyboard
 interactions.</li>
 <li>Improved plugin RAM usage.</li>
 <li>Fixed hardened runtime flags for standalone audio input
 on MacOS.</li>
 <li>Fixed LFO waveform in Tremolo module.</li>
 <li>Fixed crash when scrolling presets in Loopy Pro.</li>
 </ul>

BYOD: Bring Your Own Distortion, LV2/VST3/CLAP plugins

This package include most of the ChowDSP plugins:
 <ul>
 <li>ChowMatrix 1.3.0 (LV2/VST3)</li>
 <li>ChowTapeModel 2.11.4 (LV2/VST3/CLAP)</li>
 <li>ChowCentaur 1.4.0 (LV2/VST3)</li>
 <li>ChowKick 1.2.0 (LV2/VST3/CLAP)</li>
 <li>ChowPhaser 1.1.1 (LV2)</li>
 </ul>

ChowDSP-Plugins

Odin 2: A Synth to Please the Gods
 The sound of this 24-voice polyphonic beast will take you
 from your studio right to Valhalla. Earth shattering basses,
 exquisite leads or mad FX, Odin's got them all! Use the classic
 sound of analog waveforms - or draw your own. High quality
 emulations of legendary analog filters like the Moog-ladder or
 the Korg-35 further shape your signal. Round your sound off with
 four onboard FX, or get crazy with modulation. There's much to
 discover in Odin 2.
 This is the plugins package.

Odin2

Neural network emulator for guitar amplifiers. LV2 plugin.

Neural Amp Modeler

<ul>
 <li>Sync to latest NeuralAmpModelerCore (fixes WaveNet head check on some systems)</li>
 <li>Make dc blocker sample rate dependent</li>
 <li>x64 optimizations are now off by default</li>
 </ul>

<ul>
 <li>Simplified NAM processing loop</li>
 <li>Handle model loudness normalization in plugin</li>
 </ul>

<ul>
 <li>Added 5Hz high pass filter to clean up any DC offset created by the model.</li>
 </ul>

<ul>
 <li>Fixed model display after preset loading.</li>
 </ul>

guitarix is a virtual guitar amplifier. This package provide
 guitarix as a VST3 plugin for use inside your favourite DAW.

Guitarix VST3

JC303 is Bass Synthesizer Audio Plugin, a port of Robin
 Schmidt`s Open303, a Roland TB-303 clone plugin.
 Comes in LV2, CLAP and VST3 format

jc303

<ul>
 <li>8 internal parameters for sound MOD, inspired on Devil
 fish! (not a clone of devil fish!!! do not expect same
 sound!) Decay Knob: from 200ms...2000ms to 30ms
 ... 3000ms</li>
 <li>switch button for restore original internal parameters
 of 303 clone sound.</li>
 <li>Reinforce the Open303 powered by!</li>
 </ul>

<ul>
 <li>First internal parameter for synthesis hack: slide time</li>
 <li>CLAP format support</li>
 </ul>

A Roland TB-303 clone, LV2/VST3/CLAP plugin

Uhhyou Plugins in VST3
 It contains the following synthesizers:
 <ul>
 <li>ClangSynthh</li>
 <li>CollidingCombSynth</li>
 <li>CubicPadSynth</li>
 <li>EnvelopedSine</li>
 <li>FDNCymbal</li>
 <li>GenericDrum</li>
 <li>IterativeSinCluster</li>
 <li>MaybeSnare</li>
 <li>MembraneSynth</li>
 <li>LightPadSynth</li>
 <li>SyncSawSynth</li>
 <li>TrapezoidSynth</li>
 <li>UltraSynth</li>
 <li>WaveCymbal</li>
 </ul>
 It contains the following effects:
 <ul>
 <li>AccumulativeRingMod</li>
 <li>BasicLimiter</li>
 <li>CombDistortion</li>
 <li>EsPhaser</li>
 <li>FDN64Reverb</li>
 <li>FeedbackPhaser</li>
 <li>GlitchSprinkler</li>
 <li>L4Reverb</li>
 <li>LatticeReverb</li>
 <li>LongPhaser</li>
 <li>MiniCliffEQ</li>
 <li>NarrowingDelay</li>
 <li>OrdinaryPhaser</li>
 <li>ParallelComb</li>
 <li>ParallelDetune</li>
 <li>PitchShiftDelay</li>
 <li>RingModSpacer</li>
 <li>SevenDelay</li>
 <li>UltrasonicRingMod</li>
 </ul>

UhhyouPlugins

Added a new plugin GlitchSprinkler.

<ul>
 <li>Added randomization button to ClangCymbal.</li>
 </ul>

Added a randomization button to GenericDrum.

SpectMorph allows to analyze samples of musical instruments,
 and to combine them (morphing). It can be used to construct
 hybrid sounds, for instance a sound between a trumpet and a
 flute; or smooth transitions, for instance a sound that starts
 as a trumpet and then gradually changes to a flute. In its
 current version, SpectMorph ships with many ready-to-use
 instruments which can be combined using morphing.
 
 
 This packages contains Audio Plugins in LV2, VST and CLAP
 formats.

SpectMorph

Ratatouille is a Neural Model loader and mixer for Linux/Windows.
 
 
 It can load two models, which can be *.nam files with the Neural Amp Modeler module, or *.json or .aidax files with the RTNeural module.
 
 
 You can also load just a single model file, in that case the "Blend" control will do nothing. When you've loaded a second model, the "Blend" control will blend between the two models and mix them to simulate your specific tone.
 
 
 Ratatouille using parallel processing for the neural models, so, loading a second neural model wouldn't be remarkable on the dsp load.
 
 
 The "Delay" control could add a small delay to the second model to overcome phasing issues, or to add some color/reverb to the sound.
 
 
 To round up your sound you can load two Impulse Response Files and mix them to your needs. IR-files could be normalised on load, so that they didn't influence the loudness.
 
 
 Ratatouille.lv2 supports resampling when needed to match the expected sample rate of the loaded models. Both models and the IR Files may have different expectations regarding the sample rate.
 Neural network emulator for guitar amplifiers. LV2 plugin.

Ratatouille

Ratatouille allow to load up to two neural model files and mix there output. Those models could be *.nam files or *.json or .aidax files. So you could blend from clean to crunch for example, or, go wild and mix different amp models, or mix a amp with a pedal simulation.
 
 
 Ratatouille using parallel processing to process the second neural model and the second IR-File to reduce the dsp load.
 
 
 The "Delay" control could add a small delay to the second model to overcome phasing issues, or to add some color/reverb to the sound.
 
 
 To round up the sound it allow to load up to two Impulse Response files and mix there output as well. You could try the wildest combinations, or, be conservative and load just your single preferred IR-File.
 
 
 Each neural model may have a different expected Sample Rate, Ratatouille will resample the buffer to match that. Impulse Response Files will be resampled on the fly to match the session Sample Rate.

Kdenlive is een toepassing voor video bewerken met ondersteuning voor vele audio- en videoformaten. Het biedt geavanceerde bewerkingsfuncties, een verscheidenheid aan effecten en transities, kleurcorrectie, audio nabewerking en hulpmiddelen voor ondertiteling. Bovendien levert het de flexibiliteit om te renderen in praktisch elk formaat van uw keuze.
 Mogelijkheden:
 <ul>
 <li>Geneste sequenties</li>
 <li>Te configureren interface en sneltoetsen</li>
 <li>Scopes: Histogram, Vectorscope, RGB Parade, golfvorm en Audio-meter</li>
 <li>Proxy-bewerking</li>
 <li>Vrij online bezit en sjablonen</li>
 <li>Volgen van beweging</li>
 <li>AI aangedreven hulpmiddelen</li>
 </ul>

Kdenlive

Okular is een universele documentviewer ontwikkeld door KDE. Okular werkt op meerdere platforms, inclusief, maar niet beperkt tot Linux, Windows, Mac OS X, *BSD, etc.
      Kenmerken:
      
        Ondersteunde formaten: PDF, PS, Tiff, CHM, DjVu, Afbeeldingen, DVI, XPS, Fictionbook, Stripboek, Plucker, EPub, Fax
        Zijbalk met inhoud, miniaturen, reviews en bladwijzers
        Ondersteuning van annotaties
      
    

Okular

Een ISO-image naar een USB-schijf schrijven
    

ISO-image-schrijver

Een ISO-image naar een USB-schijf schrijven

Filelight is een toepassing om het schijfgebruik op uw computer te visualiseren door mappen te tonen met een gemakkelijk te begrijpen beeld met concentrische ringen. Filelight maakt het gemakkelijk om ruimte vrij te maken!
      Kenmerken:
      
        Lokale, op afstand of verwijderbare schijven scannen
        Gedetailleerde informatie over bestanden en mappen bekijken
        Bestanden of mappen verwijderen die te veel ruimte innemen
        Integratie in bestandsbeheerders Dolphin, Konqueror en Krusader
        Te configureren kleurenschema's
      
    

Filelight

Schijfgebruik tonen en ongebruikte bestanden verwijderen

Gwenview is een snelle en gemakkelijk te gebruiken viewer voor afbeeldingen door KDE, ideaal voor bladeren door en weergeven van een verzameling afbeeldingen.
      Mogelijkheden:
      
        Eenvoudige bewerkingen van afbeelding: draaien, bijsnijden, grootte wijzigen, spiegelen, omklappen, rode ogen reductie en aanpassen van helderheid, contrast of gamma
        Voorzie en markeer afbeeldingen met pijlen, vormen, tekstvakken, afbeeldingstempels en meer
        Basis bestandsbeheeracties zoals kopiëren, verplaatsen, verwijderen en andere
        Functies zowel als een alleenstaande toepassing als een ingebedde viewer in de webbrowser Konqueror
      
    

Gwenview

Dolphin is de bestandsbeheerder van KDE die u laat navigeren en bladeren de inhoud van uw vaste schijven, USB-sticks, SD-cards en meer. Aanmaken, verplaatsen of verwijderen van bestanden en mappen is eenvoudig en snel.
      Dolphin bevat veel functies voor productiviteit die u tijd zal besparen. De vele tabbladen en gesplitste weergeeffuncties bieden het tegelijk navigeren in meerdere mappen en u kunt gemakkelijk bestanden slepen en loslaten tussen weergaven om ze te verplaatsen of te kopiëren. Het rechtsklikmenu van Dolphin biedt met veel snelle acties dat u bestanden kan comprimeren, delen en dupliceren, naast vele andere dingen. U kunt ook uw eigen aangepaste acties toevoegen.
      Dolphin is erg lichtgewicht, maar tegelijkertijd kunt u het aanpassen aan uw specifieke behoeften. Dit betekent dat u uw bestandsbeheer kunt uitvoeren exact op de manier die u wilt. Dolphin ondersteunt drie verschillende weergavemodi: een klassieke rasterweergave van alle bestanden, een meer gedetailleerde weergave en een boomstructuurweergave. U kunt het meeste van het gedrag van Dolphin ook configureren.
      Dolphin kan bestanden en mappen uit vele Internet-cloudservices en andere machines op afstand tonen alsof ze direct op uw bureaublad staan.
      Dolphin komt ook met een geïntegreerde terminal die u commando's laat uitvoeren in de huidige map. U kunt de mogelijkheden van Dolphin zelfs nog verder uitbreiden met krachtige plug-ins om deze aan uw werkmethode aan te passen. U kunt de git-integratie-plug-in gebruiken om met git-opslagruimten interacties uit te voeren of met de Nextcloud-plug-in om uw bestanden online te synchroniseren en nog veel meer.
    

Dolphin

Toepassing geschreven in C   / Qt die het vertalen en uitspreken van tekst biedt met gebruik van Mozhi.
      Mogelijkheden:
      
        Meerdere vertaal-engines geleverd door Mozhi (sommige exemplaren kunnen specifieke engines uitschakelen)*
        Tekst vertalen en uitspreken vanaf het scherm of selectie
        Zeer goed aanpasbare sneltoetsen
        Commandoregel-interface met rijke opties
        D-Bus API
        Beschikbaar voor Linux en Windows
      
      *Terwijl Mozhi acteert als een proxy om uw privacy te beschermen, kunnen de services van de derde partij die het gebruikt de tekst die verzendt opslaan en analyseren.
    

Crow Translate

Toepassing die het vertalen en uitspreken van tekst biedt met gebruik van Mozhi.

KPat (ook KPatience) is een ontspannend kaart sorteerspel. Om het spel te winnen moet een speler een enkel kaartdek in een bepaalde volgorde naast elke andere arrangeren.
    

KPatience

Konsole is een terminal om een opdrachtshell uit te voeren. Het biedt een interface voor een opdrachtregel voor directe besturing van uw computer.
      Mogelijkheden:
      
        Tabbladen
        Meerdere profielen
        Monitoring van stilte en activiteit
        Ondersteuning van bladwijzers
        Zoeken
        Opslaan van uitvoer
      
    

Konsole

KCalc heeft alles wat u verwacht van een wetenschappelijke rekenmachine, plus:
      
        Goniometrische functies, logische bewerkingen en statistische berekeningen
        Een stapelgeheugen voor uitkomsten dat u de mogelijkheid geeft om vorige uitkomsten van berekeningen terug te halen
        Precisie is door de gebruiker te definiëren
        Het scherm biedt knippen en plakken van getallen
        De kleuren en het lettertype in het scherm is aan te passen, helpt bruikbaarheid
        Het gebruik van sneltoetsen maakt het gemakkelijk om het te gebruiken zonder muis
      
    

KCalc

GCompris is een educatieve software suite van hoge kwaliteit die bestaat uit vele activiteiten voor kinderen vanaf twee tot tien jaar.
      Sommige activiteiten zijn spelletjes, maar toch leerzaam.
      Hieronder vindt u een lijst met categorieën met enige van de activiteiten beschikbaar in die categorie.
      
        ontdekken van de computer: toetsenbord, muis, verschillende muisbewegingen, ...
        rekenen: tafels oefenen, reeksen, afbeelding spiegelen, de schaal in evenwicht brengen, wijziging gegeven, ...
        natuurkunde: de sluis, mengen van kleuren, concept van zwaartekracht, ...
        spellen: geheugenspel, vier verbinden, tic-tac-toe, sudoku, torens van hanoi, ...
        lezen: lezen oefenen, ...
        overig: leren klokkijken, het braille-systeem, doolhof, muziekinstrumenten, ...
      
      Op dit moment biedt GCompris meer dan 100 activiteiten en meer zijn er in ontwikkeling. GCompris is vrije software, dat betekent dat u het kunt aanpassen aan uw eigen behoeften, het verbeteren en, meest belangrijk, het met kinderen overal kun delen.
    

GCompris

Educatief spel met meerdere activiteiten voor kinderen van 2 tot 10

AudioTube kan in YouTube Music zoeken, een lijst maken van albums en artiesten, automatically gegenereerde afspeellijsten, albums afspelen en biedt u het samenstellen van uw eigen afspeellijst. Het is aangepast aan mobiele telefoons en bureaubladcomputers.
    

AudioTube

KolourPaint is een eenvoudig tekenprogramma om snel rasterafbeeldingen te maken. Het is nuttig als een hulpmiddel voor bijwerken en eenvoudige taken voor bewerking van afbeeldingen.
      Mogelijkheden:
      
        Ondersteuning voor het tekenen van verschillende vormen - lijnen, rechthoeken, afgeronde rechthoeken, ovalen en polygonen
        Krommen, lijnen en tekst
        Kleurkiezer
        Selecties
        Roteren, monochroom en andere geavanceerde effecten
      
    

KolourPaint

Falkon is een nieuwe en zeer snelle Qt-webbrowser. Zijn doel is om een lichtgewicht webbrowser te zijn, beschikbaar via alle belangrijke platformen. Dit project is oorspronkelijk alleen gestart voor onderwijsdoeleinden. Maar vanaf zijn start is Falcon gegroeid tot een browser rijk aan functies.
      Falcon heeft alle standaard functies die u verwacht van een webbrowser. Het bevat bladwijzers, geschiedenis (ook in de zijbalk) en tabbladen. Bovendien kunt u RSS-feeds beheren met een ingevoegde RSS-reader, ads blokkeren met een ingebouwde AdBlock plug-in, Flash-inhoud blokkeren met Click2Flash en de lokale database met CA Certificaten met een SSL-beheerder.
    

Falkon

Een universele kloktoepassing voor bureaublad en mobiel. Kclock omvat een stopwatch en een wereldklok en biedt u het zetten meerdere wekkers en timers.
      Het bevat de functionaliteiten wekker, timer, stopwatch en tijdzone. Wekkers kunnen het apparaat uit status onderbroken laten ontwaken bij gebruik van Plasma.
    

Klok

De Elisa muziekspeler is ontwikkeld door de KDE gemeenschap en streeft er naar om eenvoudig en plezierig in gebruik te zijn.
      Met Elisa kunt u in uw lokale muziekverzameling bladeren op genre, artiest, album of track, luisteren naar online radio, afspeellijsten aanmaken en beheren, liedteksten tonen en meer.
      Elisa ondersteunt uw volledige KDE kleurenschema bij gebruik op het Plasma bureaublad of anders de standaard lichte en donkere modi.
      Ontspan met Party modus, die de illustraties van uw muziekalbum voorop en gecentreerd plaatst.
    

Elisa

Speel muziek en luister naar online radiostations

Kdenlive

Videobewerker

Wĳzigingen in versie 24.08.1

Gemaakt door gemeenschap

Andere apps door KDE