User:Pozmi/sandbox1
A molecular-weight size marker, also referred to as a protein ladder, DNA ladder, or RNA ladder, is a set of standards that are used to identify the approximate size of a molecule run on a gel during electrophoresis, using the principle that molecular weight is inversely proportional to migration rate through a gel matrix. Therefore when used in gel electrophoresis, markers effectively provide a logarithmic scale by which to estimate the size of the other fragments (providing the fragment sizes of the marker are known).
Protein, DNA, and RNA markers with pre-determined fragment sizes and concentrations are commercially available. These can be run in either agarose or polyacrylamide gels. The markers are loaded in lanes adjacent to sample lanes before the commencement of the run.
DNA Markers
[edit]Development
[edit]Although the concept of molecular-weight markers has been retained, techniques of development have varied throughout the years. New inventions of molecular-weight markers are distributed in kits specific to the marker's type.
An early problem in the development of markers was achieving high resolution throughout the entire length of the marker.[1] Depending on the running conditions of gel electrophoresis, fragments may have been compressed, disrupting clarity. To address this issue, a kit for Southern Blot analysis was developed in 1990, providing the first marker to combine target DNA and probe DNA. This technique took advantage of logarithmic spacing, and could be used to identify target bands ranging over a length of 20,000 nucleotides.[2]
Design
[edit]There are two common methods in which to construct a DNA molecular-weight size marker.[3] One such method employs the technique of partial ligation.[3] DNA ligation is the process by which linear DNA pieces are connected to each other via covalent bonds; more specifically, these bonds are phosphodiester bonds.[4] Here, a 100bp duplex DNA piece is partially ligated. The consequence of this is that dimers of 200bp, trimers of 300bp, tetramers of 400bp, pentamers of 500bp, etc. will form. Additionally, a portion of the 100bp dsDNA will remain. As a result, a DNA "ladder" composed of DNA pieces of known molecular mass is created on the gel.[3]
The second method employs the use of restriction enzymes and a recognized DNA sequence.[3] The DNA is digested by a particular restriction enzyme, resulting in DNA pieces of varying molecular masses. One of the advantages of this method is that more marker can readily be created simply by digesting more of the known DNA.[3] On the other hand, the size of the DNA pieces are based on the sites where the restriction enzyme cuts. This makes it more difficult to control the size of the fragments in the marker.[5]
More recently, another method for constructing DNA molecular-weight size markers is being employed by laboratories. This strategy involves the use of Polymerase Chain Reaction (PCR).[5] This is achieved one or two ways: 1) a DNA target is amplified at the same time via primer sets, or 2) different DNA targets are amplified independently via particular primers.[5]
A commonly used DNA molecular weight marker is the genome of the Lambda phage following digestion using the restriction enzyme HindIII. This produces an array of fragments ranging from 125 to 23,125 base pairs. (Actual fragment sizes are: 23130, 9416, 6557, 4361, 2322, 2027, 564, and 125 bp.) Different DNA markers are commercially available depending on expected DNA length. The 1kb ladder with fragment ranging from about 0.5 kbp to 10 or 12 kbp, and the 100 bp ladder with fragments ranging from 100 bp to just above 1000 bp are frequently used.[6] There are also special DNA markers for supercoiled DNA and RNA.
Commercial DNA markers are usually supplied with the loading dye included in a mix, due to the difficulty of visualizing DNA during electrophoresis. Commonly used are the dye pairs xylene cyanol and bromophenol blue; these migrate at approximately the same rate as DNA fragments 4000 and 500 base pairs in length respectively in a 1% agarose gel. Cresol red and orange G can also be used for this purpose; they migrate at approximately the same rate as DNA fragments 125 and 50 base-pairs respectively under the same conditions. These dyes often exhibit different colors depending on the pH of the buffer used during the run.
Effects of Gel Conditions
[edit]As with experimental samples, the conditions of the gel can have an impact on the molecular-weight size marker that runs alongside them. Factors such as Buffer solution|buffer, charge/voltage, and concentration of gel can affect the mobility and/or appearance of your marker/ladder/standard. These elements need to be taken into consideration when selecting a marker and when analyzing the final results on a gel.
- Buffers
- Buffers act to 1) establish pH, and 2) provide ions to support conductivity. In DNA electrophoresis, the TAE (Tris-acetate-EDTA) and TBE (Tris-borate-EDTA) are the usual buffers of choice.[7] TBE buffer is preferred for small DNA pieces, whereas TAE is better suited for fragments greater than 1500 base pairs. In terms of buffering capacity, TAE is lower when compared to TBE; this generally results in slower mobility of the DNA. TBE is also capable of better resolution.[8] It must be noted that water cannot act as a substitute for one of these buffers, as the DNA will not migrate along the gel.[7] Furthermore, using water instead of buffer will result in the gel melting.[9]
- Charge/Voltage
- In terms of voltage, the recommended range is between 4 and 10 V/cm (i.e., volts/cm).[9] Agarose gels are usually run at a voltage of 5 V/cm.[3][7] It should be noted that the distance unit, cm, refers to the distance between the electrodes (i.e., the anode and the cathode) and not the length of the gel itself.[3][7] Voltages too far below or above this range will affect the mobility and the resolution of the bands. Low voltages will decrease the mobility and will cause the bands to broaden. On the other hand, high voltages will decrease the resolution of the bands. This is largely due to the fact that voltages that are too high can cause the gel to overheat, and even melt.[9]
- Concentration
- Agarose concentration must be taken into account when selecting a marker. The gel percentage effects the migration of the DNA.[3][7] Generally, the higher the gel concentration, the slower the rate at which the DNA will move through the gel. This is in addition to the role molecular weight plays in the migration of a DNA marker or sample, that is to say, that the higher the molecular weight, the slower the DNA will migrate.[3][7] Gel concentration also has an impact on the ability to visualize the bands run out on the gel. Smaller bands are better resolved on a higher percentage gel, whereas increased molecular-weight bands are more easily visualized on a lower percentage gel.[7]
Protein Markers
[edit]Development
[edit]Previously, protein markers had been developed using a variety of whole proteins. The development of a kit including a molecular-weight size marker based on protein fragments began in 1993. This protein marker, composed of 49 different amino acid sequences, included multidomain proteins, and allowed for the analysis of proteins cleaved at different sites.[10]
Current technique improvements in protein markers involve the use of auto-development. The first auto-developed regularly-weight protein marker was invented in 2012.[11]
Design
[edit]Similar to DNA markers, these markers are typically composed of purified proteins whose molecular masses are already known.[3] The list below outlines some of the proteins, as well as the molecular mass, that are commonly used when constructing a protein marker.
| Protein | Molecular Mass (kDa) |
| Beta-galactosidase | 120[12] |
| Phosphorylase B | 94[3][13] |
| Bovine Serum Albumin (BSA) | 67[3][13] |
| Ovalbumin | 43[3] |
| Turkey Albumin | 40[13] |
| Carbonic Anhydrase | 30[3][13] |
| Soybean Trypsin Inhibitor | 20.1[3][13] |
| a-Lactalbumin | 14.4[3][13] |
| Lysozyme | 14[14] |
Effects of Gel Conditions
[edit]- Buffers
- As with DNA electrophoresis, buffers can affect the mobility of both the marker and the samples. The pH of the buffer varies with the system used and consequently, each buffer system will have a different effect of the charge of a protein or proteins.[15] In addition, in the case of SDS-PAGE, the binding affinity for SDS can be impacted by the buffering system.[15] Even when using the same percentage and type of gel, the same proteins will migrate at different rates depending on the buffer used.[15]
- Charge/Voltage
- Voltage plays a role in the mobility of proteins on a gel. Proteins will migrate faster at higher voltages. Consequently, the gel running time will be shorter. Conversely, higher voltages can result in greater band diffusion. Also, if the voltage is too high, the temperature in the electrophoresis chamber can become such that the gel begins to melt.[15] The voltage that a gel should be run at depends on the type of the gel. For some gels, the voltage remains constant throughout the run, whereas, with other gels, the initial voltage is allowed to remain constant for a specified time before it is increased. This second voltage is then used for a specific time frame, after which, it may also be increased.[15]
- Concentration
- In terms of percentage, gels used for protein electrophoresis can be broken down into single-percentage gels and gradient gels.[16] Single-percentage gels are also referred to as linear gels.[15] For linear gels, the selected percentage usually falls between 7.5% and 20% Common percentage ranges for gradient gels are 4-15% and 10-20%. Each type of gel has its own advantages. For instance, linear gels are preferred when several proteins have similar molecular weights; better separation between these proteins will be displayed by a linear gel.[16] On the other hand, gradient gels are a better choice when the samples of interest contain proteins of vastly different molecular weights or that cover a large range of molecular weights.[15][16]
Choosing the correct protein marker
[edit]Molecular-weight size markers can be broken up into two categories: molecular weight markers vs. molecular ladder markers.[17] Markers are either stained or unstained, and depending on the circumstance, one may be more appropriate than another. Molecular-weight size markers can also be biochemically altered.[18] The conjugation with biotin is the most common. Molecular-weight size markers are most commonly used in SDS-polyacrylamide gel electrophoresis and Western blotting. With all the different types and uses of molecular-weight size markers, it is important to choose the appropriate protein standard. Besides the most common use, as a way to calculate the molecular weight of the samples, other uses include allowing visual evidence of protein migration and transfer efficiency and are sometimes even used for positive control.[19]
MW marker vs Protein Ladders
[edit]A molecular weight marker is one type of protein standard. They can either prestained or unstained prior to loading; depending on the type of experiment one may be more advantageous. In either case, they are normally run on the outer lane of a gel, while the sample is loaded in the middle lanes.[17] Molecular markers are different than protein ladders in that they are composed of a mixture of native proteins whose specifications are well categorized but do not correspond to whole numbers.[17] Generally these are much cheaper, but analysis only allows for an approximate value of the electrophoresis separated proteins.[17]
A protein ladder is another type of protein standard. They are almost always stained.[17] Protein ladders differ from molecular markers in that they are composed of a mixture of highly purified proteins whose specifications are known and correspond to whole numbers.[17] Generally protein ladders are composed of 10-12 proteins.[17] At the end of the experiment, after size migration occurs, a single band will represent the size of each protein contained in the ladder.[20] Markers are evenly spaced, and size analysis using these markers allows for a precise value of the protein of interest. In some cases, as a molecular confirmation method, MW markers are run with protein ladders for verification.[17]
Prestained and Unstained Markers
[edit]Protein markers can come unstained or prestained, but both have their benefits and disadvantages.[16] Simple visualization of protein separation and transfer is made possible through the use of prestained markers.[16] They are commonly used in both SDS-polyacrylamide gel electrophoresis and western blotting. In SDS-Page it allows for the monitoring of protein migration, as the protein bands will separate and can be seen during an electrophoretic run. In Western blots, the stained protein standards allow for the visualization protein transfer onto the membrane.[20] However, size determinations are not as accurate with these markers (see Recombinant and Natural Marker section for further explanation).[16]
While the unstained markers allow for more exact size determinations, they can not be viewed while the gel is running. As such, the gel must be stained in order to visualize the bands.[21]
Recombinant and Natural Markers
[edit]Besides stained and unstained markers, protein markers can be thought of in terms of recombinant and natural.[16] Recombinant markers consist of recombinant proteins which have been greatly purified. These markers are designed in such a manner as to highlight particular characteristics.[16] Examples of these characteristics include affinity tags and molecular weights which are uniformly positioned relative to each other.[16]
Natural markers, as the name implies, are a mixture of proteins which happen naturally.[16] Prestained natural markers work well for gel separation visualization. However, these markers tend to bind to the stain in a covalent manner in varying amounts and at various positions.[16] Consequently, the resultant bands may be broader. This is especially true when making comparisons to prestained recombinant markers. Due this effect, molecular weight determinations are likely to be less accurate with the prestained natural markers.[16]
Biochemically Altered
[edit]Protein standards can also be chemically altered. A common alteration is through the use biotin. Biotin has a very high affinity for streptavidin, and therefore, the binding forms a very strong complex. For visualization, a color tag is attached to the streptavidin.[18]
RNA Markers
[edit]Development
[edit]RNA ladders composed of RNA molecular-weight size markers were initially developed by using the synthetic circle method[22] to produce different-sized markers. This technique was improved upon by inventor Eric T. Kool to use circular DNA vectors as a method for producing RNA molecular-weight size markers. As referred to as the rolling circle method, the improvements of this technique stems from its efficiency in synthesizing RNA oligonucleotides. From the circular DNA template, single-stranded RNA varying in length from 4-1500 bp can be produced without the need for primers and by recycling nucleotide triphosphate. DNA can also be synthesized from the circular template, adding to this technique's versatility. In comparison to runoff transcription, the synthetic circle method produces RNA oligonucleotides without the runoff. In comparison to PCR, the synthetic circle method produces RNA oligonucleotides without the need for polymerase nor a thermal cycler. This method is also cost-efficient in its ability to synthesize grand amounts of product at a lower error rate than machine synthesizers.[22]
Design
[edit]The RNA markers consist of RNA transcripts of various incrementing lengths. For example, the Lonza 0.5-9 kbp marker[23] has bands marking 0.5, 1, 1.5, 2, 2.5, 3, 4, 5, 6, and 9 kilobase pairs. Markers are dissolved in a storage buffer, such as EDTA, and can have a shelf life of up to 2 years when stored at -80°C. To use the marker, such as for northern blot analysis, it is first thawed, and then stained so that it is detectable on a gel electrophoresis. One of the most common dyes used for markers is ethidium bromide.
The range of a particular marker refers to variety of bands it can map. A "high" range refers to relatively large fragments (measured in kb) while a "low" range refers to markers that distinguish between small fragments (measured in bp). Some markers can even be described as "ultra-low range",[24] but even more precise is the microRNA marker. A microRNA marker can be used to measure RNA fragments within a dozen nucleotides, such as the 17-25 nt microRNA marker.[25]
Different Uses of Molecular-Weight Size Markers
[edit]Many kinds of molecular-weight size markers exist, and each possess unique characteristics, lending to their involvement in a number of biological techniques. Selection of a molecular-weight size marker depends upon the marker type (DNA, RNA, or protein) and the length range it offers (e.g. 1kb). Before selecting a molecular-weight size marker, it is important to become familiar with these characteristics and properties. In a particular instance one type may be more appropriate than another. Although specific markers can vary between protocols for a given technique, this section will outline general markers and their roles.
Allozymes
[edit]The first type of molecular marker developed and ran on gel electrophoresis were allozymes. These markers are used for the detection of protein variation. The word "allozyme" (also known as "alloenzyme") comes from “allelic variants of enzymes.”[26] When ran on a gel, proteins are separated by size and charge. Although allozymes may seem dated when compared to the other markers available, they are still used today, mainly due to their low cost. One major downside is that since there is only a limited amount available, specificity an issue.[26]
DNA-based markers (1960s)
[edit]Although allozymes can detect variations in DNA, it is by an indirect method and not very accurate. DNA-based markers were developed in the 1960s.[26] These markers are much more effective at distinguishing between DNA variants. Today these are the most commonly used markers. DNA-based markers work by surveying nucleotides, which can serve a variety of functions, such as detecting differences in nucleotides or even quantifying the number of mutations.[26]
- RFLP
- Restriction fragment length polymorphism is a technique used to detect variations in homologous DNA.[27] Specific restriction endonucleases are used to digest DNA. The RFLP molecular marker is specific to a single fragment. Along with alleic RFLP markers, a molecular-weight size marker, in this case a DNA marker,[28] is also included on an electorphoresed agarose gel. The DNA marker allows for the size of the restriction fragments to be estimated.
- Minisatellites
- Similar to RFLP, this technique also uses restriction endonucleases to digest the genomic DNA. Minisatellites are short sequences of tandem repeats, approximately 10-60 base pairs. Minisatellites can be used in DNA footprinting and as regulators of gene control.[26]
PCR-based markers (1980s)
[edit]The success of DNA based markers lead to the development of PCR. PCR (polymerase chain reaction) is a DNA amplification technique that can be applied to various types of fragments. Prior to this development, to amplify DNA, it had to be cloned or isolated. Shortly after the discovery of PCR came the idea of using PCR-based markers for gel electrophoresis. These type of markers are based on PCR primers and are categorized as DNA sequence polymorphism.[26]
- Microsatellites
- Also known as SSR (simple sequence repeats) or STR (short tandem repeats), microsatellites differ from minisatellites in that they are shorter, usually 2-6 base pairs. This property of microsatellites allows for easy isolation. Microsatellites are most commonly used in population genetics. Microsatellites have a high and complex mutation rate, which is their major disadvantage.[26]
- AFLP
- Amplified fragment length polymorphism is a PCR-based DNA fingerprinting technique. DNA is first digested with endonucleases. The restriction fragments are then ligated together.[29] A molecular marker is then generated when specific fragments are selected for amplification. AFLP markers are run alongside a DNA marker on a gel. A common AFLP DNA marker is 30-330bp long.[30] The fragments of this marker lie at 10bp intervals to increase precision.
- RAPD
- Random amplified polymorphic DNA is a technique that is conducted similar to AFLP. The difference is that the molecular markers are generated at random.[29] The most common molecular-weight size marker for this technique is the 1kb DNA ladder.[31][32]
DNA Sequence Polymorphism
[edit]Although technically speaking, DNA sequence polymorphism has been going on since the use of RFLP in the 1960s, the analysis has changed significantly over the years. DNA sequence polymorphism uses older techniques like RFLP, but on a larger scale. Sequencing is much faster and more efficient. The analysis is automated, as it uses a technique known as shotgun sequencing. This high-throughput method is commonly used in population genetics.[26]
- SNPs
- SNPs (single nucleotide polymorphism), are used to detect variations in single nucleotides. The technique is very similar to that of RFLP. SNPs are used frequently for population genetic studies.[33] After amplification through PCR, these small fragments can be visualized using gel electrophoresis, and again DNA markers play a role in determining fragment length.
References
[edit]- ^ Carlson, David P. "Size markers for electrophoretic analysis of DNA". US Patent #5316908A. Google Patents. Retrieved 30 October 2013.
- ^ Carlson, David P. "Size markers for electrophoretic analysis of DNA". EP Patent #0466404B1. Google Patents. Retrieved 30 October 2013.
- ^ a b c d e f g h i j k l m n o p Blaber, Mike. "Lecture 20: Gel Electrophoresis". BCH5425 Molecular Biology and Biotechnology.
- ^ Bowen, R (20 October 1999). "DNA Ligation". Biotechnology and Genetic Engineering. Retrieved 12 November 2013.
- ^ a b c Lan, Vo Thi Thuong; Loan, Pham Thi Thanh; Duong, Pham Anh Thuy; Thanh, Le Thi; Ha, Ngo Thi; Thuan, Ta Bich (2012). "Straightforward Procedure for Laboratory Production of DNA Ladder". Journal of Nucleic Acids. 2012: 254630. doi:10.1155/2012/254630. PMC 3306978. PMID 22496965.
{{cite journal}}: CS1 maint: date and year (link) - ^ "New England Biolabs 1 kb ladder".
- ^ a b c d e f g Bowen, R. (2000). "Agarose Gel Electrophoresis of DNA". Hypertexts for Biomedical Sciences - Colorado State University.
- ^ "Tris Borate EDTA and Tris-Acetate-EDTA Buffer (TAE & TBE, pH 8.3)" (PDF). Aniara.
- ^ a b c "Agarose Gel Electrophoresis Tips & Tricks". Life Technologies.
- ^ Hartley, James. "Protein size marker ladder". US Patent #5449758A. Google Patents. Retrieved 30 October 2013.
- ^ Cheng, Tian Lu. "Auto-developing and regularly-weighted protein molecular weight marker kit and method for preparing the same". US Patent #20130217133A1. Google Patents. Retrieved 30 October 2013.
- ^ weight-marker/ "Prestained Protein Molecular Weight Marker". ThermoScientific. Retrieved 12 November 2013.
{{cite web}}: Check|url=value (help) - ^ a b c d e f Ingelman, Margareta (2004). Courses/KE7001per3/Labs/prot_purana_lab_05.doc "Protein separation and analysis". KE7001 Biochemistry Labs. Retrieved 12 November 2013.
{{cite web}}: Check|url=value (help) - ^ "Protein Molecular Weight Markers". Help Biotech. 2011. Retrieved 12 November 2013.
- ^ a b c d e f g "Protein Handbook 2013" (PDF). Life Technologies. Cite error: The named reference "Protein Handbook" was defined multiple times with different content (see the help page).
- ^ a b c d e f g h i j k l "Electrophoresis A Guide to Polyacrylamide Gel Electrophoresis and Detection" (PDF). Bio-Rad.
- ^ a b c d e f g h "Protein Molecular Weight Markers Comparison and Selection Guide". Retrieved 16 November 2013.
- ^ a b "Biotinylated Molecular Weight Marker". Retrieved 16 November 2013.
- ^ "Molecular Weight Markers". Retrieved 16 November 2013.
- ^ a b "Pierce Prestained Protein Molecular Weight Marker". Retrieved 16 November 2013.
- ^ "Protein Molecular Weight Markers Comparison and Selection Guide". ThermoScientific. Retrieved 12 November 2013.
- ^ a b Kool, Eric T. "Circular DNA vectors for synthesis of RNA and DNA". US Patent #6096880A. Google Patents. Retrieved 27 November 2013.
- ^ Lonza. "RNA Markers 0.5–9 kbp" (PDF). Document #18123-0807-06. Lonza Rockland Inc. Retrieved 27 November 2013.
- ^ Sigma-Aldrich Co. "Protein Electrophoresis Molecular Weight Markers". Sigma-Aldrich Co. Retrieved 27 November 2013.
- ^ New England Biolabs. "microRNA Marker". New England Bioloabs. Retrieved 27 November 2013.
- ^ a b c d e f g h Schlotterer, Christian. "The Evolution of Molecular Markers" (PDF). Retrieved 26 November 2013.
- ^ "Population Improvement". Retrieved 30 October 2013.
- ^ Higgins, L. (April 2012). "DNA Ladder for Gel Electrophoresis". Lewis & Clark College. Retrieved 15 November 2013.
{{cite web}}: CS1 maint: date and year (link) - ^ a b Mueller, Ulrich. "AFLP genotyping and fingerprinting" (PDF). Retrieved 30 October 2013.
- ^ Invitrogen Corporation (2003). "30-330 bp AFLP® DNA Ladder" (PDF). Manual. Life Technologies Corporation. Retrieved 15 November 2013.
- ^ Gianniny, Christine (May 2004). "unRAPD analysis of mtDNA from tomato flowers free of nuclear DNA artifacts" (PDF). BioTechniques. 36 (5): 772–776. doi:10.2144/04365BM04. PMID 15152595. Retrieved 15 November 2013.
{{cite journal}}: Unknown parameter|coauthors=ignored (|author=suggested) (help)CS1 maint: date and year (link) - ^ Roberts, Mark A.; Crawford, Don L. (1 June 2000). "Use of Randomly Amplified Polymorphic DNA as a Means of Developing Genus- and Strain-Specific Streptomyces DNA Probes". Applied and Environmental Microbiology. 66 (6): 2555–2564. doi:10.1128/AEM.66.6.2555-2564.2000. PMC 110581. PMID 10831438.
- ^ McClean, Phillip. "The Classes of Molecular Markers". Retrieved 30 October 2013.
Category:Biochemistry methods Category:Biotechnology Category:Biological techniques and tools