Jump to content

USNS Kanawha

From Wikipedia, the free encyclopedia
(Redirected from USNS Kanawha (T-AO-196))
USNS Kanawha (T-AO-196)
History
United States
NameUSNS Kanawha
NamesakeThe Kanawha River in West Virginia
Awarded1 February 1987
BuilderAvondale Shipyards, Inc., New Orleans, Louisiana
Laid down13 July 1989
Launched22 September 1990
In service6 December 1991-present
Identification
StatusIn active service with U.S. Military Sealift Command
General characteristics
Class and typeHenry J. Kaiser-class replenishment oiler
TypeFleet replenishment oiler
Tonnage31,200 deadweight tons
Displacement
  • 9,500 tons light
  • Full load variously reported as 42,382 tons and 40,700 long tons (41,353 metric tons)
Length677 ft (206 m)
Beam97 ft 5 in (29.69 m)
Draft36 ft (11 m) load line
Installed power
  • 16,000 hp (11.9 MW) per shaft
  • 34,442 hp (25.7 MW) total sustained
PropulsionTwo medium-speed Colt-Pielstick PC4-2/2 10V-570 diesel engines, two shafts, controllable-pitch propellers
Speed20 knots (37 km/h; 23 mph)
Capacity
Complement103 (18 civilian officers, 1 U.S. Navy officer, 64 merchant seamen, 20 U.S. Navy enlisted personnel)
Aircraft carriedNone
Aviation facilitiesHelicopter landing platform
Notes
  • Five refueling stations
  • Two dry cargo transfer rigs

USNS Kanawha (T-AO-196) is a Henry J. Kaiser-class fleet replenishment oiler of the United States Navy in non-commissioned service in the Military Sealift Command.

USNS Kanawha, the tenth Henry J. Kaiser-class ship, was laid down by the Avondale Shipyards in New Orleans, Louisiana, on 13 July 1989. She was launched on 22 September 1990 and delivered to the U.S. Navy and placed in non-commissioned service with the Military Sealift Command on 6 December 1991.

Kanawha is in active service with the Military Sealift Command Naval Fleet Auxiliary Force and is assigned to the U.S. Atlantic Fleet.

Design

[edit]

The Henry J. Kaiser-class oilers were preceded by the shorter Cimarron-class fleet replenishment oilers. Kanawha has an overall length of 206.5 metres (677 ft 6 in). It has a beam of 29.7 metres (97 ft) and a draft of 11 metres (36 ft). The oiler has a displacement of 41,353 tonnes (40,700 long tons) at full load. It has a capacity of 180,000 barrels (29,000,000 L; 7,600,000 US gal) of aviation fuel or fuel oil. It can carry a dry load of 690 square metres (7,400 sq ft) and can refrigerate 128 pallets of food. The ship is powered by two 10 PC4.2 V 570 Colt-Pielstick diesel engines that drive two shafts; this gives a power of 25.6 megawatts (34,800 PS; 34,300 shp).[1]

The Henry J. Kaiser-class oilers have maximum speeds of 20 knots (37 km/h). They were built without armaments but can be fitted with close-in weapon systems. The ship has a helicopter platform but not any maintenance facilities. It is fitted with five fuelling stations; these can fill two ships at the same time and the ship is capable of pumping 3,400,000 litres (900,000 US gal) of diesel or 2,000,000 litres (540,000 US gal) of jet fuel per hour. It has a complement of eighty-nine civilians (nineteen officers), twenty-nine spare crew, and six United States Navy crew.[1]

Collision

[edit]

On November 18, 2010, USNS Kanawha "briefly came into contact" with HMCS Fredericton of the Royal Canadian Navy during a replenishment-at-sea manoeuvre off the coast of Florida.[2] There were no injuries, but both ships suffered "superficial" damage consisting of scrapes and dents on both hulls.

References

[edit]
  1. ^ a b "Fleet Replenishment". Naval Technology. Retrieved 25 August 2015.
  2. ^ "HMCS Fredericton slightly damaged in accident". CBC. November 19, 2010. Retrieved November 22, 2010.