Jump to content

2-Ethoxyethanol

From Wikipedia, the free encyclopedia
(Redirected from Ethyl cellosolve)
2-Ethoxyethanol
2-Ethoxyethanol
Names
Preferred IUPAC name
2-Ethoxyethanol
Other names
Cellosolve
ethylene glycol ethyl ether
oxitol
Ethyl Cellosolve
EGEE
Identifiers
3D model (JSmol)
1098271
ChEBI
ChEMBL
ChemSpider
DrugBank
ECHA InfoCard 100.003.459 Edit this at Wikidata
EC Number
  • 203-804-1
82142
KEGG
RTECS number
  • KK8050000
UNII
UN number 1171
  • InChI=1S/C4H10O2/c1-2-6-4-3-5/h5H,2-4H2,1H3
    Key: ZNQVEEAIQZEUHB-UHFFFAOYSA-N
  • InChI=1/C4H10O2/c1-2-6-4-3-5/h5H,2-4H2,1H3
    Key: ZNQVEEAIQZEUHB-UHFFFAOYAD
  • CCOCCO
Properties
C4H10O2
Molar mass 90.122 g·mol−1
Appearance clear liquid
Odor sweet, ether-like
Density 0.930 g/cm3, liquid
Melting point −70 °C (−94 °F; 203 K)
Boiling point 135 °C (275 °F; 408 K)
miscible
Vapor pressure 4 mmHg (20°C)[1]
Hazards
GHS labelling:
GHS02: FlammableGHS06: ToxicGHS07: Exclamation markGHS08: Health hazard
Danger
H226, H302, H331, H360
P201, P202, P210, P233, P240, P241, P242, P243, P261, P264, P270, P271, P280, P281, P301 P312, P303 P361 P353, P304 P340, P308 P313, P311, P321, P330, P370 P378, P403 P233, P403 P235, P405, P501
NFPA 704 (fire diamond)
NFPA 704 four-colored diamondHealth 2: Intense or continued but not chronic exposure could cause temporary incapacitation or possible residual injury. E.g. chloroformFlammability 2: Must be moderately heated or exposed to relatively high ambient temperature before ignition can occur. Flash point between 38 and 93 °C (100 and 200 °F). E.g. diesel fuelInstability (yellow): no hazard codeSpecial hazards (white): no code
2
2
Flash point 44 °C (111 °F; 317 K)
Explosive limits 1.7%-15.6%[1]
Lethal dose or concentration (LD, LC):
2451 mg/kg (mouse, oral)
2125 mg/kg (rat, oral)[2]
2000 ppm (rat, 7 hr)
1820 ppm (mouse, 7 hr)[2]
3000 ppm (guinea pig, 24 hr)[2]
NIOSH (US health exposure limits):
PEL (Permissible)
TWA 200 ppm (740 mg/m3) [skin][1]
REL (Recommended)
TWA 0.5 ppm (1.8 mg/m3) [skin][1]
IDLH (Immediate danger)
500 ppm[1]
Related compounds
Related ethers
2-Propoxyethanol
2-Butoxyethanol
Related compounds
Ethylene glycol
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
☒N verify (what is checkY☒N ?)

2-Ethoxyethanol, also known by the trademark Ethyl cellosolve, is a solvent used widely in commercial and industrial applications. It is a clear, colorless, nearly odorless liquid that is miscible with water, ethanol, diethyl ether, acetone, and ethyl acetate.[3]

2-Ethoxyethanol is manufactured by the reaction of ethylene oxide with ethanol.

As with other glycol ethers, 2-ethoxyethanol has the useful property of being able to dissolve chemically diverse compounds. It will dissolve oils, resins, grease, waxes, nitrocellulose, and lacquers.[3] This is an ideal property as a multi-purpose cleaner, and, therefore, 2-ethoxyethanol is used in products such as varnish removers and degreasing solutions.

References

[edit]
  1. ^ a b c d e NIOSH Pocket Guide to Chemical Hazards. "#0258". National Institute for Occupational Safety and Health (NIOSH).
  2. ^ a b c "2-Ethoxyethanol". Immediately Dangerous to Life or Health Concentrations (IDLH). National Institute for Occupational Safety and Health (NIOSH).
  3. ^ a b National Research Council (U.S.). Subcommittee on Spacecraft Maximum Allowable Concentrations (1996). Spacecraft maximum allowable concentrations for selected airborne contaminants. National Academies Press. p. 189. ISBN 978-0-309-05478-2. Retrieved 19 February 2012.
[edit]