Jump to content

eNodeB

From Wikipedia, the free encyclopedia
(Redirected from ENode B)

E-UTRAN Node B, also known as Evolved Node B (abbreviated as eNodeB or eNB), is the element in E-UTRA of LTE that is the evolution of the element Node B in UTRA of UMTS. It is the hardware that is connected to the mobile phone network that communicates directly wirelessly with mobile handsets (UEs), like a base transceiver station (BTS) in GSM networks.

CableFree 4G/5G Remote Radio Head (RRH) with 2x2 MIMO, 2x20W RF power and CPRI fibre interface

Traditionally, a Node B has minimum functionality, and is controlled by a Radio Network Controller (RNC). However, with an eNB, there is no separate controller element. This simplifies the architecture and allows lower response times.

Differences between an evolved Node B and a Node B

[edit]

Air interface

[edit]

eNB uses the E-UTRA protocols OFDMA (downlink) and SC-FDMA (uplink) on its LTE-Uu interface. By contrast, NodeB uses the UTRA protocols WCDMA or TD-SCDMA on its Uu interface.

Control functionality

[edit]

eNB embeds its own control functionality, rather than using a RNC (Radio Network Controller) as does a Node B.

Network interfaces

[edit]

eNB interfaces with the System Architecture Evolution (SAE) core (also known as Evolved Packet Core (EPC)) and other eNB as follows:[1]

References

[edit]
  1. ^ 3GPP TS 36.300 V11.0.0 (2011-12)