Dornier Do 132
| Do 132 | |
|---|---|
| |
| Do 132 mockup | |
| Role | Utility helicopter |
| Manufacturer | Dornier |
| Status | Canceled project |
The Dornier Do 132 was a utility helicopter under development in Germany in the late 1960s. While the design was a conventional pod-and-boom layout, the propulsion system was unusual in that it used a turbine engine, not to drive the rotor directly, but to provide a source of hot gas that was fed through the rotor shaft, along the blades, and out through tip jets. The intention was to eliminate the weight and mechanical complexity of a gearbox and an anti-torque system for the tail.
This engine system underwent extensive static tests while a full-size mockup was built to prove the aerodynamics in a wind tunnel. Ultimately, however, the programme was cancelled in 1971 before a prototype was actually constructed.
Specifications (as designed)
[edit]Data from Jane's All the World's Aircraft 1969–70[1]
General characteristics
- Crew: 1
- Capacity: 4 passengers
- Length: 7.50 m (24 ft 7 in)
- Height: 2.80 m (9 ft 2 in)
- Empty weight: 675 kg (1,488 lb)
- Gross weight: 1,430 kg (3,153 lb)
- Max takeoff weight: 1,650 kg (3,638 lb)
- Powerplant: 1 × Pratt & Whitney Canada PT6-A20 gas generator, 540 kW (720 shp)
- Main rotor diameter: 10.70 m (35 ft 1 in)
- Main rotor area: 89.9 m2 (968 sq ft)
Performance
- Maximum speed: 229 km/h (142 mph, 124 kn)
- Cruise speed: 221 km/h (137 mph, 119 kn)
- Range: 450 km (280 mi, 240 nmi)
References
[edit]
- ^ Taylor 1969, p. 92.
- Taylor, John W. R., ed. (1969). Jane's All the World's Aircraft 1969–70. London: Sampson Low Marston & Co. Ltd.
- Taylor, Michael J. H. (1989). Jane's Encyclopedia of Aviation. London: Studio Editions. p. 331.
- EADS website[permanent dead link]
 | This article on an aircraft of the 1960s is a stub. You can help Wikipedia by expanding it. |