Warp-weighted loom

The warp-weighted loom is a simple and ancient form of loom in which the warp yarns hang freely from a bar, which is supported by upright poles which can be placed at a convenient slant against a wall. Bundles of warp threads are tied to hanging weights called loom weights which keep the threads taut.

Three heddle-rods for weaving twill

Evidence of the warp-weighted loom appears in the Neolithic period in central Europe. It is depicted in artifacts of Bronze Age Greece and was common throughout Europe, remaining in use in Scandinavia into modern times. Loom weights from the Bronze Age were excavated in Miletos, a Greek city in Anatolia.

The warp tension needed on a loom is roughly proportional to yarn diameter, and loom weights must be positioned in an even, level row, with all the threads hanging nearly straight down, for smooth weaving. This means that the shape of a loom weight limits a loom to certain thread counts, and the mass of the loom weight is related to the yarn used. This means that loom weights can be used to calculate the density and other properties of the fabric made on them.

History

The warp-weighted loom may have originated in the Neolithic period. The earliest evidence of warp-weighted looms comes from sites belonging to the Starčevo culture in modern Serbia and Hungary from late Neolithic sites in Switzerland. This loom was used in Ancient Greece, and spread north and west throughout Europe thereafter. It was extensively used in the north among Scandinavian people. For yet unknown reasons, the warp-weighted loom diminished in popularity and disappeared from common use. The arrival of mechanized looms and industry may have contributed to this decline. It remained in use longest in Scandinavia; researcher Marta Hoffman found warp-weighted looms still in use on an isolated island off the coast of Norway and among the Sami of Norway and Finland in the 1950s. Today, the warp-weighted loom is used as a hobby and in historic preservation societies.

• 
  Loom weight discovered in Bersabe, Galilee
• 
  Ancient Roman loom replica
• 
  Saxon loomweights
• 
  Icelandic warp-weighted loom

Use

Elements of a warp-weighted loom

A warp-weighted loom has two upright posts (C); they support a horizontal beam (D), which is cylindrical so that the finished cloth can be rolled around it, allowing the loom to be used to weave a piece of cloth taller than the loom, and preserving an ergonomic working height. The warp threads (F, and A and B) hang from the beam and rest against the shed rod (E). The heddle-bar (G) is tied to some of the warp threads (A, but not B), using loops of string called leashes (H). So when the heddle rod is pulled out and placed in the forked sticks protruding from the posts (not lettered, no technical term given in citation), the shed (1) is replaced by the counter-shed (2). By passing the weft through the shed and the counter-shed, alternately, cloth is woven.

The warp-weighted loom is used in a near-vertical position, and the fabric is woven from the top of the loom toward the ground. This allows the weaver to walk back-and-forth while working, so that wider cloth can be woven than is practical on a ground loom. On Ancient Greek vase paintings, two weavers, most often women, are shown working side-by-side on the warp-weighted loom. This is unusual because most other looms require a resting position of standing or sitting. According to Artemidorus, if one dreams of a warp-weighted loom it means an upcoming journey. If one dreams of any other type of loom, one should expect rest.

Additionally, extra warp thread can be wound around the weights. When a weaver has reached the bottom of the available warp, the completed section can be rolled around the top beam, and additional lengths of warp threads can be unwound from the weights to continue. This frees the weaver from vertical size constraints.

Gallery

• 
  The weaver with her arm behind her back is passing (not throwing) the shuttle through the shed; the weaver reaching upwards is battening the previous weft yarn, beating it against the fell (cloth already woven). Greek urn, ca. 550–530 BCE.
• 
  Reconstruction of a Roman loom. Warps have been chainstitched together; weights are resting on a low bench.
• 
  Reconstruction of a vertical neolithic loom with genuine loom weights and string heddles, on display at the National Museum of Textile Industry in Sliven, Bulgaria
• 
  Reconstruction of a vertical neolithic loom with shed bar without string heddles, on display at Piatra Neamț Museum
• 
  Warp weighted loom with string heddles in the Central Textile Museum in Łódź, Poland
• 
  Loom with four heddle-rods. Mechanism for stopping the beam from rotating during weaving is also clearly shown. Reconstruction of a Gaulish loom.
• 
  Three heddle-rods.

References

• Petty, Christina (2014). Warp Weighted Looms: Then and Now Anglo-Saxon and Viking Archaeological Evidence and Modern Practitioners. University of Manchester.

• Barber, E. J. W. (1991). Prehistoric Textiles. Princeton University Press. ISBN 0-691-00224-X.

• Burnham, Dorothy K. (1980). Warp and Weft: A Textile Terminology. Royal Ontario Museum. ISBN 0-88854-256-9.

• Carroll, Diane Lee (January 1983). "Warping the Greek Loom: A second Method". American Journal of Archaeology. 87 (1): 96–99. doi:10.2307/504672. JSTOR 504672.

• Crowfoot, Grace (November 1937). "Of the Warp-Weighted Loom". The Annual of the British School at Athens. 37: 36–47. doi:10.1017/s0068245400017950.

• Hoffmann, Marta (1974) [1964]. The Warp-Weighted Loom. Robin and Russ Handweavers. ISBN 82-00-08094-3.

External links

• Article describing the experimental reconstruction of the 6th-7th century Anglo-Saxon warp-weighted loom from Pakenham, Suffolk.
• Anna Grostøls film about Warp-weighted loom in Nordern-Norway, del I
• Anna Grostøls film about Warp-weighted loom in Nordern-Norway, del II
• Anna Grostøls film about Warp-weighted loom in Nordern-Norway, del III
• Grenevev på Senterfornordligefolk