Caprolactam

Caprolactam (CPL) is an organic compound with the formula (CH₂)₅C(O)NH. This colourless solid is a lactam (a cyclic amide) of caproic acid. Global demand for this compound is approximately five million tons per year, and the vast majority is used to make Nylon 6 filament, fiber, and plastics.

Caprolactam

Names
Preferred IUPAC name Azepan-2-one
Other names 1-Aza-2-cycloheptanone 2-Azacycloheptanone ε-Caprolactam Capron PK4 Cyclohexanone iso-oxime Extrom 6N Hexahydro-2-azepinone Hexahydro-2H-azepin-2-one (9CI) Hexanolactam Hexano-6-lactam Aminocaproic lactam
Identifiers
CAS Number	105-60-2 Y
3D model (JSmol)	Interactive image
Beilstein Reference	106934
ChEBI	CHEBI:28579 Y
ChEMBL	ChEMBL276218 Y
ChemSpider	7480 Y
ECHA InfoCard	100.003.013
EC Number	203-313-2
Gmelin Reference	101802
KEGG	C06593 Y
PubChem CID	7768
UNII	6879X863Z8 Y
CompTox Dashboard (EPA)	DTXSID4020240
InChI InChI=1S/C6H11NO/c8-6-4-2-1-3-5-7-6/h1-5H2,(H,7,8) Y Key: JBKVHLHDHHXQEQ-UHFFFAOYSA-N Y InChI=1/C6H11NO/c8-6-4-2-1-3-5-7-6/h1-5H2,(H,7,8) Key: JBKVHLHDHHXQEQ-UHFFFAOYAF
SMILES O=C1NCCCCC1
Properties
Chemical formula	C6H11NO
Molar mass	113.160 g·mol−1
Appearance	White solid
Density	1.01 g/cm3
Melting point	69.2 °C (156.6 °F; 342.3 K)
Boiling point	270.8 °C (519.4 °F; 544.0 K) at 1013.25 hPa
Solubility in water	866.89 g/l (22 °C)
Vapor pressure	8.10−8 mmHg (20°C)
Hazards
GHS labelling:
Pictograms
Signal word	Warning
Hazard statements	H302, H315, H319, H332, H335
Precautionary statements	P261, P264, P270, P271, P280, P301 P312, P302 P352, P304 P312, P304 P340, P305 P351 P338, P312, P321, P330, P332 P313, P337 P313, P362, P403 P233, P405, P501
Flash point	125 °C (257 °F; 398 K)
Explosive limits	1.4%-8.0%
NIOSH (US health exposure limits):
PEL (Permissible)	none
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa). Y verify (what is YN ?) Infobox references

Synthesis and production

Caprolactam was first described in the late 1800s when it was prepared by the cyclization of ε-aminocaproic acid, the product of the hydrolysis of caprolactam. World demand for caprolactam was estimated to reach five million tons per year for 2015. 90% of caprolactam produced is used to make filament and fiber, 10% for plastics, and a small amount is used as a chemical intermediate. Due to its commercial significance, many methods have been developed for the production of caprolactam. It was estimated that 90% of all caprolactam is synthesised from cyclohexanone (1), which is first converted to its oxime (2). Treatment of this oxime with acid induces the Beckmann rearrangement to give caprolactam (3):

The immediate product of the acid-induced rearrangement is the bisulfate salt of caprolactam. This salt is neutralized with ammonia to release the free lactam and cogenerate ammonium sulfate. In optimizing the industrial practices, much attention is directed toward minimizing the production of ammonium salts.

The other major industrial route involves formation of the oxime from cyclohexane using nitrosyl chloride, and this method accounts for 10% of world production. The advantage of this method is that cyclohexane is less expensive than cyclohexanone.

Other paths to caprolactam include the depolymerization of waste Nylon 6, and the reaction of caprolactone with ammonia. At bench scale, the reaction between cyclohexanone with hydrazoic acid to give caprolactam in the Schmidt reaction has been reported.

Uses

Almost all caprolactam produced goes into the manufacture of Nylon 6. The conversion entails a ring-opening polymerization:

Nylon 6 is widely used in fibers and plastics.

In situ anionic polymerization is employed for cast nylon production where conversion from ε-caprolactam to Nylon 6 takes place inside a mold. In conjunction with endless fiber processing the term thermoplastic resin transfer molding (T-RTM) is often used.

Caprolactam is also used in the synthesis of several pharmaceutical drugs including pentylenetetrazol, meptazinol, and laurocapram.

Safety

Caprolactam is an irritant and is mildly toxic, with an LD₅₀ of 1.1 g/kg (rat, oral). In 1991, it was included on the list of hazardous air pollutants by the U.S. Clean Air Act of 1990. It was subsequently removed from the list in 1996 at the request of the manufacturers. In water, caprolactam hydrolyzes to aminocaproic acid, which is used medicinally.

As of 2016 caprolactam had the unusual status of being the only chemical in the International Agency for Research on Cancer's lowest hazard category, Group 4: "probably not carcinogenic to humans".

Currently, there is no official permissible exposure limit set for workers handling caprolactam in the United States. The recommended exposure limit is set at 1 mg/m³ over an eight-hour work shift for caprolactam dusts and vapors. The short-term exposure limit is set at 3 mg/m³ for caprolactam dusts and vapors.

Climate impact

The production of caprolactam can produce nitrous oxide as a by-product, a highly potent greenhouse gas. Emissions differ significantly due to different production processes and inconsistent use of emission abatement technology. A study commissioned by the German Federal Ministry for Economic Affairs and Climate Action estimates emissions between 9 kg of nitrous oxide per ton of caprolactam and almost zero.

Nitrous oxide emissions from caprolactam production are unregulated in most countries. Unlike other chemical production processes, nitrous oxide emissions from caprolactam production are not included in the European Union Emissions Trading System.