Wikipedia

.properties

.properties is a file extension for files mainly used in Java-related technologies to store the configurable parameters of an application. They can also be used for storing strings for Internationalization and localization; these are known as Property Resource Bundles.

.properties
Filename extension
.properties
Internet media typetext/plain

Each parameter is stored as a pair of strings, one storing the name of the parameter (called the key), and the other storing the value.

Unlike many popular file formats, there is no RFC for .properties files and specification documents are not always clear, most likely due to the simplicity of the format.

Format

edit

Each line in a .properties file normally stores a single property. Several formats are possible for each line, including key=value, key = value, key:value, and key value. Single-quotes or double-quotes are considered part of the string. Trailing space is significant and presumed to be trimmed as required by the consumer.

Comment lines in .properties files are denoted by the number sign (#) or the exclamation mark (!) as the first non blank character, in which all remaining text on that line is ignored. The backwards slash is used to escape a character. An example of a properties file is provided below. 

# You are reading a comment in ".properties" file.
! The exclamation mark ('!') can also be used for comments.
# Comments are ignored.
# Blank lines are also ignored.

# Lines with "properties" contain a key and a value separated by a delimiting character.
# There are 3 delimiting characters: equal ('='), colon (':') and whitespace (' ', '\t' and '\f').
website = https://en.wikipedia.org/
language : English
topic .properties files
# A word on a line will just create a key with no value.
empty
# Whitespace that appears between the key, the delimiter and the value is ignored.
# This means that the following are equivalent (other than for readability).
hello=hello
hello = hello
# To start the value with whitespace, escape it with a backslash ('\').
whitespaceStart = \ <-This space is not ignored.
# Keys with the same name will be overwritten by the key that is the furthest in a file.
# For example the final value for "duplicateKey" will be "second".
duplicateKey = first
duplicateKey = second
# To use the delimiter characters inside a key, you need to escape them with a ('\').
# However, there is no need to do this in the value.
delimiterCharacters\:\=\ = This is the value for the key "delimiterCharacters\:\=\ "
# Adding a backslash ('\') at the end of a line means that the value continues on the next line.
multiline = This line \
continues
# If you want your value to include a backslash ('\'), it should be escaped by another backslash ('\').
path = c:\\wiki\\templates
# This means that if the number of backslashes ('\') at the end of the line is even, the next line is not included in the value. 
# In the following example, the value for "evenKey" is "This is on one line\".
evenKey = This is on one line\\
# This line is a normal comment and is not included in the value for "evenKey".
# If the number of backslash ('\') is odd, then the next line is included in the value.
# In the following example, the value for "oddKey" is "This is line one and\# This is line two".
oddKey = This is line one and\\\
# This is line two
# Whitespace characters at the beginning of a line is removed.
# Make sure to add the spaces you need before the backslash ('\') on the first line. 
# If you add them at the beginning of the next line, they will be removed.
# In the following example, the value for "welcome" is "Welcome to Wikipedia!".
welcome = Welcome to \
          Wikipedia!
# If you need to add newlines and carriage returns, they need to be escaped using ('\n') and ('\r') respectively.
# You can also optionally escape tabs with ('\t') for readability purposes.
valueWithEscapes = This is a newline\n and a carriage return\r and a tab\t.
# You can also use Unicode escape characters (maximum of four hexadecimal digits).
# In the following example, the value for "encodedHelloInJapanese" is "こんにちは".
encodedHelloInJapanese = \u3053\u3093\u306b\u3061\u306f
# But with more modern file encodings like UTF-8, you can directly use supported characters.
helloInJapanese = こんにちは

In the example above:

  • the number sign (#) and the exclamation mark (!) at the beginning of a line (line 1, 2, etc), marks text as comments and comments they are ignored,
  • an empty line (line 5) is also ignored,
  • "website" (line 8) would be a key, and its corresponding value would be "https://en.wikipedia.org/",
  • all of the whitespace at the beginning of line 44 is excluded. This means that the key "welcome" (line 43) has the value "Welcome to Wikipedia!" and not "Welcome          to Wikipedia!".

Before Java 9, the encoding of a .properties file is ISO-8859-1, also known as Latin-1. All non-ASCII characters must be entered by using Unicode escape characters, e.g. \uHHHH where HHHH is a hexadecimal index of the character in the Unicode character set. This allows for using .properties files as resource bundles for localization. A non-Latin-1 text file can be converted to a correct .properties file by using the native2ascii tool that is shipped with the JDK or by using a tool, such as po2prop,[1] that manages the transformation from a bilingual localization format into .properties escaping.

An alternative to using unicode escape characters for non-Latin-1 character in ISO 8859-1 character encoded Java *.properties files is to use the JDK's XML Properties file format which by default is UTF-8 encoded, introduced starting with Java 1.5.[2]

Another alternative is to create custom control that provides custom encoding.[3]

In Java 9 and newer, the default encoding specifically for property resource bundles is UTF-8, and if an invalid UTF-8 byte sequence is encountered it falls back to ISO-8859-1.[4][5]

Editing

edit

Editing .properties files is done using any text editor such as those typically installed on various Operating Systems including Notepad on Windows or Emacs, Vim, etc. on Linux systems.

Third-party tools are also available with additional functionality specific to editing .properties files such as:

Non-Java uses and exceptions

edit

Apache Flex uses .properties files as well, but here they are UTF-8 encoded.[6]

In Apache mod_jk's uriworkermap.properties format, an exclamation mark ("!") denotes a Negation operator when used as the first non blank character in a line.[7]

Perl CPAN contains Config::Properties to interface to a .properties file.[8]

SAP uses .properties files for localization within their framework SAPUI5 and its open-source variant OpenUI5[9]

There are many Node.js (JavaScript/TypeScript) options available on Npm's package manager.[10]

PHP also has many package options available.[11]

See also

edit
  • XML, JSON and YAML are used by some for more complex configuration formats.

References

edit
  1. ^ Translate Toolkit's po2prop converts native character encodings in a Gettext PO file into correctly escaped ascii without the need for native2ascii
  2. ^ Java XML Properties DTD
  3. ^ "java - How to use UTF-8 in resource properties with ResourceBundle". Stack Overflow. Archived from the original on 2015-03-17. Retrieved 2015-01-28.
  4. ^ "Internationalization Enhancements in JDK 9". Oracle Help Center. Retrieved 2018-01-05.
  5. ^ "JEP 226: UTF-8 Property Resource Bundles". OpenJDK. Retrieved 2020-09-03.
  6. ^ "IResourceBundle". Adobe ActionScript 3 (AS3 Flex) API Reference.
  7. ^ "uriworkermap.properties configuration". The Apache Tomcat Connectors - Reference Guide.
  8. ^ "Config::Properties - Read and write property files". metacpan.org.
  9. ^ "SAPUI5 SDK - Demo Kit". sapui5.hana.ondemand.com. Retrieved 2019-05-14.
  10. ^ "keywords:properties java parse - npm search". www.npmjs.com. Retrieved 2022-03-22.
  11. ^ "Packagist". packagist.org. Retrieved 2022-03-22.
edit
Retrieved from "https://en.wikipedia.org/w/index.php?title=.properties&oldid=1239775913"