1. Introduction
When authoring CSS,
one often encounters significant repetition in certain features.
For example, a given media query might be repeated in several places,
or a selector meant to apply to all heading elements
requires specifying :is(h1, h2, h3, h4, h5, h6) in every location that uses it.
This repetition makes stylesheets more verbose and difficult to read,
and also affects maintenance,
as the author has to keep each repetition in sync when making any changes.
This specification defines methods for extending several CSS features
so that a long or repeatedly-used value can be given a short, memorable name instead,
or a feature can be given a more complex definition controlled by a scripting language.
This makes stylesheets easier to read,
and more powerful in general,
as authors can extend the feature-set of CSS themselves
rather than waiting for standards bodies to define new features for them.
2. Extension Names
All extensions defined in this specification use a common syntax for defining their ”names”:
the <extension-name> production.
An <extension-name> is any identifier that starts with two dashes (U 002D HYPHEN-MINUS),
like --foo, or even exotic names like -- or ------.
The CSS language will never use identifiers of this form for any language-defined purpose,
so it’s safe to use them for author-defined purposes
without ever having to worry about colliding with CSS-defined names.
3. Custom Selectors
A declarative custom selector is defined with the @custom-selector rule:
@custom-selector = @custom-selector <custom-selector> <selector-list> ;
<custom-selector> = <custom-arg>? : <extension-name> [ ( <custom-arg> #? ) ]? ;
<custom-arg> = $ <ident-token> ;
Where there must be no whitespace
between :
and <extension-name> or between $
and <ident-token> in the above definitions.
Simple things are easy:
@custom-selector :--heading {
expansion: h1, h2, h3, h4, h5, h6;
}
More complicated things are possible:
// Arguments are specified with $foo.
// An arg before the pseudo-class captures the rest of the compound selector.
@custom-selector $rest:--n-siblings($n, $sel) {
specificity: $sel;
// assumes $sel is a selector, parses it and uses its specificity
// otherwise, specificity is [0,1,0]
expansion: $rest:nth-child(1 of $sel):nth-last-child($n of $sel),
:nth-child(1 of $sel):nth-last-child($n of $sel) ~ $rest;
}
This defines a custom selector which is written as a pseudo-class with the given <extension-name>,
and represents a :is() selector using the provided <selector-list> as its argument.
For example, if an author wanted to easily refer to all heading elements in their HTML document,
they could create an alias:
@custom-selector :--heading h1, h2, h3, h4, h5, h6;
:--heading { /* styles for all headings */ }
:--heading p { /* more styles */ }
/* etc */
3.1. Script-based Custom Selectors
This one’s more complicated than MQs.
Brian Kardell came up with a good proposal for evaluating selectors as JS functions that return a boolean,
which had decent performance characteristics by specifying the qualities of the element it was based on
(which determined when it would be called).
<script>
CSS.customSelector.set("_foo",
{"predicate": function(el){...},
"matches": "a"});
</script>
"matches" is an optional selector specifying what subset of elements the custom selector is valid for.
The selector is automatically false for elements that don’t match,
and the predicate isn’t called.
By default, the predicate is called whenever there’s a mutation in an element that matches the "matches" selector,
or one of its descendants.
You should be able to suppress the auto-calling,
and be able to trigger the predicate to run manually.
That way you can use mutation listeners manually to only call the predicate when necessary.
We should probably offer some sugar for filtering the list of mutations that trigger the predicate to be called.
Maybe just a list of attributes that you’ll be caring about? And/or tagnames?
Maybe let the pseudo-class also accept an argument,
and pass it (as a serialized string) as a second argument to the predicate. :_foo would pass null
,
while :_foo() would pass ""
.
3.2. CSSOM
Fill in.
4. Custom Properties
Need to more fully support Custom Properties
(and eventually remove them from the variable spec entirely, since they’ll be defined here).
By default, custom properties are optimized for use as var() values—they inherit,
have an empty initial value,
don’t do any syntax checking,
and don’t animate.
All of these should be adjustable somehow.
@custom-property --foo {
scope: [ inherit | local ];
initial: <declaration-value>*;
value: <length> <length> <color>;
/* Literally, define a simplistic definition syntax.
OR FULL CSS PROPERTY GRAMMAR?!? */
}
If you provide a "value" field with animatable types,
we can animate in the most direct fashion automatically.
We could also let you hook into that:
you register a callback,
and whenever a property starts animating,
we call it with the starting and ending values.
You have to return a function which takes a progress value (between 0 and 1)
and returns a value for your property;
we’ll call it as we animate the value.
(How can we hook into Web Anim here? Can you just return an Animation object?)
Do we need a hook for computed values? Interesting.
We could just hand your callback a set of property values for the element and its parent (maybe siblings, if you ask for it?),
and you can return a new value for the property.
This is probably an advanced feature for a later date.
Definitely need a way to listen for elements receiving and changing property values,
so you can efficiently polyfill things and make your own properties.
Unsure how it would look at the moment.
5. Custom Functions
Interesting possibilities here.
Definitely need some way to define custom functions in CSS.
This would, for example, let people define whatever color function they want,
such as implementing the
HUSL color space.
Definitely need a JS interface.
What options are needed?
Call time/frequency:
- Default should probably treat the function as a preprocessor,
calling the JS function once per instance in the stylesheet
and substituting in the returned value.
- Should probably have an option to allow calling per element/instance combo, too.
Gets called more as match results change.
We can take some cues from my thoughts on a random() function.
It needs per-instance,
per-element&instance,
and per "identifier", so you can reuse the same value in multiple spots.
That last one can probably be handled manually by the JS,
so we don’t have to privilege a particular argument as an identifier.
We’d need to provide the context in which it’s used.
Which property, for example.
Should we allow them to be used in other places,
or should we just define more contextual locations as we go?
That is, should we allow custom-defined functions in @supports with this API,
or should we add a .customSupports
map?
I suspect that individual cases will have their own useful contextual information,
so it’s better to specialize each instance of custom functions.
How much can we do in pure CSS?
Being able to substitute values depending on MQs or support queries would be useful.
(However, we can do that much just by using custom properties and var().)
To get *real* use out of it, though, I suspect we’d need fuller support for conditionals,
likely in the form of SASS’s @if or something similar.
6. Custom Selector Combinators
Selectors are made of two pieces:
simple selectors,
and combinators.
We should allow custom combinators too.
This is JS-only, because it’s transforming elements, not filtering them,
and you can’t express any useful transformations in pure CSS.
You provide a function which,
when given an element,
produces a list of zero or more elements.
For examples, with div /--foo/ span,
the CSS engine will match the first part of the selector
and find all the div elements.
It passes that list to the function registered for the --foo combinator,
and expects to get a new list of elements returned.
It then continues on its way,
filtering that list to include only span elements, etc.
A child combinator would be something like:
CSS.customCombinator.set("--child", function(el) {
return el.children;
});
Then div /--child/ span would be identical to div > span.
If we generalize a selector with a custom combinator to A /--custom/ B,
then the UA would automatically call the --custom function
whenever new elements match A.
If elements stop matching A,
it won’t bother;
it’ll just drop them from the result.
Alternately, the function could take a list of elements
(all the elements matching A)
and return a new list of elements.
This would be a bit more complicated for the author,
but would allow more variety in the types of combinators that could be defined,
as you could define things that depend on the entire set of matched elements.
For example, you could define A /nth 1/ B to give only the first element from the set of A matches.
(Maybe we allow both variants,
since the per-element one is easier to optimize and program against,
but the per-set one allows some useful stuff.)
Similarly to custom pseudo-classes,
we’d allow arguments,
with them parsed eagerly per-instance
and passed to the combinator function.
If we do the per-element combinator function,
we could potentially cache the results,
so that it never needs to be called again for the same element.
Possibly have a flag that turns off this behavior,
so that you’re guaranteed to be called again.
7. Custom At-Rules
This one’s even less developed,
but it would be interesting to allow custom at-rules as well.
It’s definitely pure-JS as well.
Unsure exactly what’s best here.
Possibly register a callback per rule,
which is called with the prelude/contents of the at-rule?
Should we do the callback approach,
or just maintain a list of custom at-rules
and let scripts parse them themselves?
Unfortunately, the latter means we’d have to have a special mechanism to alert scripts
when new at-rules get added or removed.
For a lot of these at-rules, we may want a way to know when they’re "applied"—when, according to the built-in at-rules like @media and @supports,
the rule would be applied.
Privacy Considerations
No new privacy considerations have been reported on this specification.
Security Considerations
No new security considerations have been reported on this specification.
Conformance requirements are expressed with a combination of
descriptive assertions and RFC 2119 terminology. The key words “MUST”,
“MUST NOT”, “REQUIRED”, “SHALL”, “SHALL NOT”, “SHOULD”, “SHOULD NOT”,
“RECOMMENDED”, “MAY”, and “OPTIONAL” in the normative parts of this
document are to be interpreted as described in RFC 2119.
However, for readability, these words do not appear in all uppercase
letters in this specification.
All of the text of this specification is normative except sections
explicitly marked as non-normative, examples, and notes. [RFC2119]
Examples in this specification are introduced with the words “for example”
or are set apart from the normative text with class="example"
,
like this:
Informative notes begin with the word “Note” and are set apart from the
normative text with class="note"
, like this:
Note, this is an informative note.
Advisements are normative sections styled to evoke special attention and are
set apart from other normative text with <strong class="advisement">
, like
this: UAs MUST provide an accessible alternative.
A style sheet is conformant to this specification
if all of its statements that use syntax defined in this module are valid
according to the generic CSS grammar and the individual grammars of each
feature defined in this module.
A renderer is conformant to this specification
if, in addition to interpreting the style sheet as defined by the
appropriate specifications, it supports all the features defined
by this specification by parsing them correctly
and rendering the document accordingly. However, the inability of a
UA to correctly render a document due to limitations of the device
does not make the UA non-conformant. (For example, a UA is not
required to render color on a monochrome monitor.)
An authoring tool is conformant to this specification
if it writes style sheets that are syntactically correct according to the
generic CSS grammar and the individual grammars of each feature in
this module, and meet all other conformance requirements of style sheets
as described in this module.
So that authors can exploit the forward-compatible parsing rules to
assign fallback values, CSS renderers must treat as invalid (and ignore
as appropriate) any at-rules, properties, property values, keywords,
and other syntactic constructs for which they have no usable level of
support. In particular, user agents must not selectively
ignore unsupported component values and honor supported values in a single
multi-value property declaration: if any value is considered invalid
(as unsupported values must be), CSS requires that the entire declaration
be ignored.
Once a specification reaches the Candidate Recommendation stage,
non-experimental implementations are possible, and implementors should
release an unprefixed implementation of any CR-level feature they
can demonstrate to be correctly implemented according to spec.
To establish and maintain the interoperability of CSS across
implementations, the CSS Working Group requests that non-experimental
CSS renderers submit an implementation report (and, if necessary, the
testcases used for that implementation report) to the W3C before
releasing an unprefixed implementation of any CSS features. Testcases
submitted to W3C are subject to review and correction by the CSS
Working Group.
Further information on submitting testcases and implementation reports
can be found from on the CSS Working Group’s website at http://www.w3.org/Style/CSS/Test/.
Questions should be directed to the [email protected] mailing list.
Simple things are easy:
@custom-selector :--heading {
expansion: h1, h2, h3, h4, h5, h6;
}
More complicated things are possible:
// Arguments are specified with $foo.
// An arg before the pseudo-class captures the rest of the compound selector.
@custom-selector $rest:--n-siblings($n, $sel) {
specificity: $sel;
// assumes $sel is a selector, parses it and uses its specificity
// otherwise, specificity is [0,1,0]
expansion: $rest:nth-child(1 of $sel):nth-last-child($n of $sel),
:nth-child(1 of $sel):nth-last-child($n of $sel) ~ $rest;
}
↵
This one’s more complicated than MQs.
Brian Kardell came up with a good proposal for evaluating selectors as JS functions that return a boolean,
which had decent performance characteristics by specifying the qualities of the element it was based on
(which determined when it would be called).
<script>
CSS.customSelector.set("_foo",
{"predicate": function(el){...},
"matches": "a"});
</script>
"matches" is an optional selector specifying what subset of elements the custom selector is valid for.
The selector is automatically false for elements that don’t match,
and the predicate isn’t called.
By default, the predicate is called whenever there’s a mutation in an element that matches the "matches" selector,
or one of its descendants.
You should be able to suppress the auto-calling,
and be able to trigger the predicate to run manually.
That way you can use mutation listeners manually to only call the predicate when necessary.
We should probably offer some sugar for filtering the list of mutations that trigger the predicate to be called.
Maybe just a list of attributes that you’ll be caring about? And/or tagnames?
Maybe let the pseudo-class also accept an argument,
and pass it (as a serialized string) as a second argument to the predicate. :_foo would pass null
,
while :_foo() would pass ""
.
↵
Need to more fully support Custom Properties
(and eventually remove them from the variable spec entirely, since they’ll be defined here).
By default, custom properties are optimized for use as var() values—they inherit,
have an empty initial value,
don’t do any syntax checking,
and don’t animate.
All of these should be adjustable somehow.
@custom-property --foo {
scope: [ inherit | local ];
initial: <declaration-value>*;
value: <length> <length> <color>;
/* Literally, define a simplistic definition syntax.
OR FULL CSS PROPERTY GRAMMAR?!? */
}
If you provide a "value" field with animatable types,
we can animate in the most direct fashion automatically.
We could also let you hook into that:
you register a callback,
and whenever a property starts animating,
we call it with the starting and ending values.
You have to return a function which takes a progress value (between 0 and 1)
and returns a value for your property;
we’ll call it as we animate the value.
(How can we hook into Web Anim here? Can you just return an Animation object?)
Do we need a hook for computed values? Interesting.
We could just hand your callback a set of property values for the element and its parent (maybe siblings, if you ask for it?),
and you can return a new value for the property.
This is probably an advanced feature for a later date.
Definitely need a way to listen for elements receiving and changing property values,
so you can efficiently polyfill things and make your own properties.
Unsure how it would look at the moment.
↵
Interesting possibilities here.
Definitely need some way to define custom functions in CSS.
This would, for example, let people define whatever color function they want,
such as implementing the
HUSL color space.
Definitely need a JS interface.
What options are needed?
Call time/frequency:
- Default should probably treat the function as a preprocessor,
calling the JS function once per instance in the stylesheet
and substituting in the returned value.
- Should probably have an option to allow calling per element/instance combo, too.
Gets called more as match results change.
We can take some cues from my thoughts on a random() function.
It needs per-instance,
per-element&instance,
and per "identifier", so you can reuse the same value in multiple spots.
That last one can probably be handled manually by the JS,
so we don’t have to privilege a particular argument as an identifier.
We’d need to provide the context in which it’s used.
Which property, for example.
Should we allow them to be used in other places,
or should we just define more contextual locations as we go?
That is, should we allow custom-defined functions in @supports with this API,
or should we add a .customSupports
map?
I suspect that individual cases will have their own useful contextual information,
so it’s better to specialize each instance of custom functions.
How much can we do in pure CSS?
Being able to substitute values depending on MQs or support queries would be useful.
(However, we can do that much just by using custom properties and var().)
To get *real* use out of it, though, I suspect we’d need fuller support for conditionals,
likely in the form of SASS’s @if or something similar.
↵
Selectors are made of two pieces:
simple selectors,
and combinators.
We should allow custom combinators too.
This is JS-only, because it’s transforming elements, not filtering them,
and you can’t express any useful transformations in pure CSS.
You provide a function which,
when given an element,
produces a list of zero or more elements.
For examples, with div /--foo/ span,
the CSS engine will match the first part of the selector
and find all the div elements.
It passes that list to the function registered for the --foo combinator,
and expects to get a new list of elements returned.
It then continues on its way,
filtering that list to include only span elements, etc.
A child combinator would be something like:
CSS.customCombinator.set("--child", function(el) {
return el.children;
});
Then div /--child/ span would be identical to div > span.
If we generalize a selector with a custom combinator to A /--custom/ B,
then the UA would automatically call the --custom function
whenever new elements match A.
If elements stop matching A,
it won’t bother;
it’ll just drop them from the result.
Alternately, the function could take a list of elements
(all the elements matching A)
and return a new list of elements.
This would be a bit more complicated for the author,
but would allow more variety in the types of combinators that could be defined,
as you could define things that depend on the entire set of matched elements.
For example, you could define A /nth 1/ B to give only the first element from the set of A matches.
(Maybe we allow both variants,
since the per-element one is easier to optimize and program against,
but the per-set one allows some useful stuff.)
Similarly to custom pseudo-classes,
we’d allow arguments,
with them parsed eagerly per-instance
and passed to the combinator function.
If we do the per-element combinator function,
we could potentially cache the results,
so that it never needs to be called again for the same element.
Possibly have a flag that turns off this behavior,
so that you’re guaranteed to be called again.
↵
This one’s even less developed,
but it would be interesting to allow custom at-rules as well.
It’s definitely pure-JS as well.
Unsure exactly what’s best here.
Possibly register a callback per rule,
which is called with the prelude/contents of the at-rule?
Should we do the callback approach,
or just maintain a list of custom at-rules
and let scripts parse them themselves?
Unfortunately, the latter means we’d have to have a special mechanism to alert scripts
when new at-rules get added or removed.
For a lot of these at-rules, we may want a way to know when they’re "applied"—when, according to the built-in at-rules like @media and @supports,
the rule would be applied.
↵