CSS Conditional Rules Module Level 3

1. Introduction

1.1. Background

This section is not normative.

[CSS21] defines one type of conditional group rule, the @media rule, and allows only style rules (not other @-rules) inside of it. The @media rule provides the ability to have media-specific style sheets, which is also provided by style sheet linking features such as @import and link. The restrictions on the contents of @media rules made them less useful; they have forced authors using CSS features involving @-rules in media-specific style sheets to use separate style sheets for each medium.

This specification extends the rules for the contents of conditional group rules to allow other @-rules, which enables authors to combine CSS features involving @-rules with media specific style sheets within a single style sheet.

This specification also defines an additional type of conditional group rule, @supports, to address author and user requirements.

The @supports rule allows CSS to be conditioned on implementation support for CSS properties and values. This rule makes it much easier for authors to use new CSS features and provide good fallback for implementations that do not support those features. This is particularly important for CSS features that provide new layout mechanisms, and for other cases where a set of related styles needs to be conditioned on property support.

1.2. Module Interactions

This module replaces and extends the @media rule feature defined in [CSS21] section 7.2.1 and incorporates the modifications previously made non-normatively by [MEDIAQUERIES-4] section 1.

2. Processing of conditional group rules

This specification defines some CSS at-rules, called conditional group rules, that associate a condition with a group of other CSS rules. These different rules allow testing different types of conditions, but share common behavior for how their contents are used when the condition is true and when the condition is false.

For example, this rule:

@media print {
  /* hide navigation controls when printing */
  #navigation { display: none }
}

causes a particular CSS rule (making elements with ID “navigation” be display:none) apply only when the style sheet is used for a print medium.

Each conditional group rule has a condition, which at any time evaluates to true or false. When the condition is true, CSS processors must apply the rules inside the group rule as though they were at the group rule’s location; when the condition is false, CSS processors must not apply any of rules inside the group rule. The current state of the condition does not affect the CSS object model, in which the contents of the group rule always remain within the group rule.

Tests

If condition is true, rules applied in place.

If condition is false, rules not applied.

CSSOM contains rules regardless of condition.

conditional-CSSGroupingRule.html (live test) (source)

This means that when multiple conditional group rules are nested, a rule inside of both of them applies only when all of the rules' conditions are true.

Tests

Nested rules apply when all conditions are true.

For example, with this set of nested rules:

@media print { /* rule (1) */
  /* hide navigation controls when printing */
  #navigation { display: none }
  @media (max-width: 12cm) { /* rule (2) */
    /* keep notes in flow when printing to narrow pages */
    .note { float: none }
  }
}

the condition of the rule marked (1) is true for print media, and the condition of the rule marked (2) is true when the width of the display area (which for print media is the page box) is less than or equal to 12cm. Thus the rule #navigation { display: none } applies whenever this style sheet is applied to print media, and the rule .note { float: none } is applied only when the style sheet is applied to print media and the width of the page box is less than or equal to 12 centimeters.

When the condition for a conditional group rule changes, CSS processors must reflect that the rules now apply or no longer apply, except for properties whose definitions define effects of computed values that persist past the lifetime of that value (such as for some properties in [CSS3-TRANSITIONS] and [CSS3-ANIMATIONS]).

Tests

Change in condition simultaneous with change in condition application (except per transition/animation rules).

at-media-dynamic-001.html (live test) (source)

3. Contents of conditional group rules

All conditional group rules are defined to take a <rule-list> in their block, and accept any rule that is normally allowed at the top-level of a stylesheet, and not otherwise restricted. (For example, an @import rule must appear at the actual beginning of a stylesheet, and so is not valid inside of another rule.)

Tests

Valid to nest all unrestricted top-level rules.

Invalid or unknown rules inside the <rule-list> must be considered invalid and ignored, but do not invalidate the conditional group rule.

Tests

Invalid rules do not invalidate conditional group rule.

Any namespace prefixes used in a conditional group rule must have been declared, otherwise they are invalid.

For example, this rule containing a CSS qualified name is valid, because the namespace prefix has been bound to a namespace url:

@namespace x url(http://www.w3.org/1999/xlink);
@supports (content: attr(x|href)) {
  // do something }

For example, to determine whether this rule is valid:

@supports (content: attr(n|tooltip)) {
  // do something }

The user agent will consult the namespace map to see whether a namespace url exists corresponding to the "n" prefix.

Tests

Validity of namespace prefixes depends on namespace map.

4. Placement of conditional group rules

Conditional group rules are allowed wherever style rules are allowed (at the top-level of a style sheet, as well as within other conditional group rules). CSS processors must process such rules as described above.

Tests

Conditional group rules allowed wherever style rules are allowed.

Any at-rules that are not allowed after a style rule (e.g., @charset, @import, or @namespace rules) are also not allowed after a conditional group rule, and are therefore invalid when so placed.

Tests

At rules not allowed after style rule invalid after conditional group rule.

5. Media-specific style sheets: the @media rule

The @media rule is a conditional group rule whose condition is a media query. Its syntax is:

@media <media-query-list> {
  <rule-list>
}

It consists of the at-keyword @media followed by a (possibly empty) media query list (as defined in [MEDIAQUERIES-4]), followed by a block containing arbitrary rules. The condition of the rule is the result of the media query.

This @media rule:

@media screen and (min-width: 35em),
       print and (min-width: 40em) {
  #section_navigation { float: left; width: 10em; }
}

has the condition screen and (min-width: 35em), print and (min-width: 40em), which is true for screen displays whose viewport is at least 35 times the initial font size and for print displays whose viewport is at least 40 times the initial font size. When either of these is true, the condition of the rule is true, and the rule #section_navigation { float: left; width: 10em; } is applied.

Tests

Media rule condition can be empty

at-media-whitespace-optional-001.html (live test) (source)

Media rule condition is media query

White space is optional where not required for tokenization.

6. Feature queries: the @supports rule

The @supports rule is a conditional group rule whose condition tests whether the user agent supports CSS property:value pairs. Authors can use it to write style sheets that use new features when available but degrade gracefully when those features are not supported. These queries are called CSS feature queries or (colloquially) supports queries.

Note: CSS has existing mechanisms for graceful degradation, such as ignoring unsupported properties or values, but these are not always sufficient when large groups of styles need to be tied to the support for certain features, as is the case for use of new layout system features.

The syntax of the condition in the @supports rule is similar to that defined for <media-condition> in [MEDIAQUERIES-4], but without the "unknown" value logic:

negation is needed so that the new-feature styles and the fallback styles can be separated (within the forward-compatible grammar’s rules for the syntax of @-rules), and not required to override each other.
conjunction (and) is needed so that multiple required features can be tested.
disjunction (or) is needed when there are multiple alternative features for a set of styles, particularly when some of those alternatives are vendor-prefixed properties or values.

Therefore, the syntax of the @supports rule allows testing for property:value pairs, and arbitrary conjunctions (and), disjunctions (or), and negations (not) of them.

The syntax of the @supports rule is:

@supports <supports-condition> {
  <rule-list>
}

with <supports-condition> defined as:

<supports-condition> = not <supports-in-parens>
                     | <supports-in-parens> [ and <supports-in-parens> ]*
                     | <supports-in-parens> [ or <supports-in-parens> ]*
<supports-in-parens> = ( <supports-condition> ) | <supports-feature> | <general-enclosed>
<supports-feature> = <supports-decl>
<supports-decl> = ( <declaration> )

The above grammar is purposely very loose for forwards-compatibility reasons, since the <general-enclosed> production allows for substantial future extensibility. Any @supports rule that does not parse according to the grammar above (that is, a rule that does not match this loose grammar which includes the <general-enclosed> production) is invalid. Style sheets must not use such a rule and processors must ignore such a rule (including all of its contents).

Tests

White space is optional where not required for tokenization.

css-supports-015.xht (live test) (source)

Grammatically-invalid @supports rule is ignored.

Each of these grammar terms is associated with a boolean result, as follows:

<supports-condition>

<supports-in-parens>

The result is the result of the child subexpression.

not <supports-in-parens>

The result is the negation of the <supports-in-parens> term.

Tests

Not negates supports condition.

Not must be followed by space.

Not requires parentheses.

<supports-in-parens> [ and <supports-in-parens> ]*

The result is true if all of the <supports-in-parens> child terms are true, and false otherwise.

Tests

And condition is true iff all linked conditions are true.

And requires parentheses.

css-supports-019.xht (live test) (source)

<supports-in-parens> [ or <supports-in-parens> ]*

The result is false if all of the <supports-in-parens> child terms are false, and true otherwise.

Tests

Or condition is true iff any of linked conditions is true.

Or must be followed by space.

Or requires parentheses.

<supports-decl>

The result is true if the UA supports the declaration within the parentheses.

Tests

Supports condition is true iff declaration is supported.

Declaration cannot include semicolon.

Declaration value can be empty.

css-supports-022.xht (live test) (source)

Declaration cannot include invalid !tokens.

<general-enclosed>

The result is false.

Authors must not use <general-enclosed> in their stylesheets. It exists only for future-compatibility, so that new syntax additions do not invalidate too much of a <supports-condition> in older user agents.

Tests

Unrecognized but grammatically-valid condition is false, not invalid.

Brackets/parenthesis must be balanced

css-supports-035.xht (live test) (source)

The condition of the @supports rule is the result of the <supports-condition> in its prelude.

For example, the following rule

@supports ( display: flex ) {
  body, #navigation, #content { display: flex; }
  #navigation { background: blue; color: white; }
  #article { background: white; color: black; }
}

applies the rules inside the @supports rule only when display: flex is supported.

The following example shows an additional @supports rule that can be used to provide an alternative for when display: flex is not supported:

@supports not ( display: flex ) {
  body { width: 100%; height: 100%; background: white; color: black; }
  #navigation { width: 25%; }
  #article { width: 75%; }
}

Note that the width declarations may be harmful to the flex-based layout, so it is important that they be present only in the non-flex styles.

The following example checks for support for the box-shadow property, including checking for support for vendor-prefixed versions of it. When the support is present, it specifies both box-shadow (with the prefixed versions) and border in a way what would cause the box to become invisible were box-shadow not supported.

.noticebox {
  border: 1px solid black;
  padding: 1px;
}
@supports ( box-shadow: 0 0 2px black inset ) or
          ( -moz-box-shadow: 0 0 2px black inset ) or
          ( -webkit-box-shadow: 0 0 2px black inset ) or
          ( -o-box-shadow: 0 0 2px black inset ) {
  .noticebox {
    -moz-box-shadow: 0 0 2px black inset;
    -webkit-box-shadow: 0 0 2px black inset;
    -o-box-shadow: 0 0 2px black inset;
    box-shadow: 0 0 2px black inset; /* unprefixed last */
    /* override the rule above the @supports rule */
    border: none;
    padding: 2px;
  }
}

To avoid confusion between and and or, the syntax requires that both and and or be specified explicitly (rather than, say, using commas or spaces for one of them). Likewise, to avoid confusion caused by precedence rules, the syntax does not allow and, or, and not operators to be mixed without a layer of parentheses.

For example, the following rule is not valid:

@supports (transition-property: color) or
          (animation-name: foo) and
          (transform: rotate(10deg)) {
  /* ... */
}

Instead, authors must write one of the following:

@supports ((transition-property: color) or
           (animation-name: foo)) and
          (transform: rotate(10deg)) {
  /* ... */
}

@supports (transition-property: color) or
          ((animation-name: foo) and
           (transform: rotate(10deg))) {
  /* ... */
}

Tests

Parentheses are required to mix operators.

The declaration being tested must always occur within parentheses, when it is the only thing in the expression.

For example, the following rule is not valid:

@supports display: flex {
  /* ... */
}

Instead, authors must write:

@supports (display: flex) {
  /* ... */
}

Tests

Parentheses are required around declaration test.

The syntax allows extra parentheses when they are not needed. This flexibility is sometimes useful for authors (for example, when commenting out parts of an expression) and may also be useful for authoring tools.

For example, authors may write:

@supports ((display: flex)) {
  /* ... */
}

Tests

Extra parentheses are allowed.

A trailing !important on a declaration being tested is allowed, though it won’t change the validity of the declaration.

For example, the following rule is valid:

@supports (display: flex !important) {
  /* ... */
}

Tests

!important is allowed.

6.1. Definition of support

For forward-compatibility, section 4.1.8 (Declarations and properties) of [CSS21] defines rules for handling invalid properties and values. CSS processors that do not implement or partially implement a specification must treat any part of a value that they do not implement, or do not have a usable level of support for, as invalid according to this rule for handling invalid properties and values, and therefore must discard the declaration as a parse error.

A CSS processor is considered to support a declaration (consisting of a property and value) if it accepts that declaration (rather than discarding it as a parse error) within a style rule. If a processor does not implement, with a usable level of support, both the property and the value given, then it must not accept the declaration or claim support for it.

Note: Note that properties or values whose support is effectively disabled by user preferences are still considered as supported by this definition. For example, if a user has enabled a high-contrast mode that causes colors to be overridden, the CSS processor is still considered to support the color property even though declarations of the color property may have no effect. On the other hand, a developer-facing preference whose purpose is to enable or disable support for an experimental CSS feature does affect this definition of support.

These rules (and the equivalence between them) allow authors to use fallback (either in the [CSS1] sense of declarations that are overridden by later declarations or with the new capabilities provided by the @supports rule in this specification) that works correctly for the features implemented. This applies especially to compound values; implementations must implement all parts of the value in order to consider the declaration supported, either inside a style rule or in the declaration condition of an @supports rule.

Tests

Supports queries are true iff property declaration (including all values) is parsed/supported.

7. APIs

Tests

7.1. Extensions to the `CSSRule` interface

The CSSRule interface is extended as follows:

partial interface CSSRule {
    const unsigned short SUPPORTS_RULE = 12;
};

Tests

CSSRule.SUPPORTS_RULE = 12

conditional-CSSGroupingRule.html (live test) (source)

7.2. The `CSSConditionRule` interface

The CSSConditionRule interface represents all the “conditional” at-rules, which consist of a condition and a statement block.

[Exposed=Window]
interface CSSConditionRule : CSSGroupingRule {
    readonly attribute CSSOMString conditionText;
};

Tests

CSSConditionRule inherits from CSSGroupingRule.

conditional-CSSGroupingRule.html (live test) (source)

CSSConditionRule has .conditionText attribute.

conditionText of type CSSOMString

The conditionText attribute represents the condition of the rule. Since what this condition does varies between the derived interfaces of CSSConditionRule, those derived interfaces may specify different behavior for this attribute (see, for example, CSSMediaRule below). In the absence of such rule-specific behavior, the following rules apply:

The conditionText attribute, on getting, must return the result of serializing the associated condition.

Tests

.conditionText returns serialization of condition.

7.3. The `CSSMediaRule` interface

The CSSMediaRule interface represents a @media at-rule:

[Exposed=Window]
interface CSSMediaRule : CSSConditionRule {
    [SameObject, PutForwards=mediaText] readonly attribute MediaList media;
    readonly attribute boolean matches;
};

media of type MediaList, readonly

The media attribute must return a MediaList object for the list of media queries specified with the @media at-rule.

Tests

.media returns a MediaList matching the @media condition.

matches of type boolean, readonly

The matches attribute returns true if the rule is in an stylesheet attached to a document whose Window matches this rule’s media media query, and returns false otherwise.

Tests

.matches matches the media query, returns boolean.

conditionText of type CSSOMString (CSSMediaRule-specific definition for attribute on CSSConditionRule)

The conditionText attribute (defined on the CSSConditionRule parent rule), on getting, must return the value of media.mediaText on the rule.

Tests

Value of CSSMediaRule.conditionText matches value of media.mediaText.

7.4. The `CSSSupportsRule` interface

The CSSSupportsRule interface represents a @supports rule.

[Exposed=Window]
interface CSSSupportsRule : CSSConditionRule {
  readonly attribute boolean matches;
};

matches of type boolean, readonly

The matches attribute returns the evaluation of the CSS feature query represented in conditionText.

Tests

CSSSupportsRule.matches returns true if matches feature query

conditionText of type CSSOMString (CSSSupportsRule-specific definition for attribute on CSSConditionRule)

The conditionText attribute (defined on the CSSConditionRule parent rule), on getting, must return the condition that was specified, without any logical simplifications, so that the returned condition will evaluate to the same result as the specified condition in any conformant implementation of this specification (including implementations that implement future extensions allowed by the <general-enclosed> extensibility mechanism in this specification). In other words, token stream simplifications are allowed (such as reducing whitespace to a single space or omitting it in cases where it is known to be optional), but logical simplifications (such as removal of unneeded parentheses, or simplification based on evaluating results) are not allowed.

Tests

CSSSupportsRule.conditionText can have tokenization simplifications.

CSSSupportsRule.conditionText cannot have other simplifications.

7.5. The `CSS` namespace, and the `supports()` function

The CSS namespace holds useful CSS-related functions that do not belong elsewhere.

partial namespace CSS {
  boolean supports(CSSOMString property, CSSOMString value);
  boolean supports(CSSOMString conditionText);
};

supports(CSSOMString property, CSSOMString value), returns boolean

When the supports(property, value) method is invoked with two arguments property and value:

If property is an ASCII case-insensitive match for any defined CSS property that the UA supports, or is a custom property name string, and value successfully parses according to that property’s grammar, return true.
Otherwise, return false.

Note: No CSS escape or whitespace processing is performed on the property name, so CSS.supports(" width", "5px") will return false, as " width" isn’t the name of any property due to the leading space.

Note: !important flags are not part of property grammars, and will cause value to parse as invalid, just as they would in the value argument to element.style.setProperty().

Tests

CSS.supports(arg1, arg2) evaluates support of property arg1 with value arg2.

supports(CSSOMString conditionText), returns boolean

When the supports(conditionText) method is invoked with a single conditionText argument:

If conditionText, parsed and evaluated as a <supports-condition>, would return true, return true.
Otherwise, If conditionText, wrapped in parentheses and then parsed and evaluated as a <supports-condition>, would return true, return true.
Otherwise, return false.

All namespaces in the conditionText argument are considered invalid, just as they are in document.querySelector("a|b").

Tests

CSS.supports(arg1) evaluates supports condition arg1.

CSS.supports(arg1) implies parentheses.

supports-conditionText.html (live test) (source)

Tests

CSS-supports-L3.html (live test) (source)

Security Considerations

This spec introduces no new security considerations.

Privacy Considerations

Various features in this specification, associated mainly with the @media rule but also to some degree with the @supports rule, provide information to Web content about the user’s hardware and software and their configuration and state. Most of the information is provided through the features in [MEDIAQUERIES-4] rather than through the features in this specification. However, the @supports rule may provide some additional details about the user’s software and whether it is running with non-default settings that may enable or disable certain features.

Most of this information can also be determined through other APIs. However, the features in this specification are one of the ways this information is exposed on the Web.

This information can also, in aggregate, be used to improve the accuracy of fingerprinting of the user.

8. Changes

The following (non-editorial) changes were made to this specification since the 13 January 2022 Candidate Recommendation Snapshot:

Clarified that supports() must return false for invalid custom property values
Fixed Web IDL, "bool" should have been "boolean"
Clarified that a processor must support both the property and the value (Issue 8795)
Added .matches to @media and @supports (Issue 4240)
Updated to the new parsing algo names and block production names.
Removed procedure to set readonly CSSMediaRule.conditionText (PR 8796)
Made conditionText readonly.

The following (non-editorial) changes were made to this specification since the 8 December 2020 Candidate Recommendation Snapshot:

Clarified that discarding property declarations only applies to style rules, not at-rules
Clarified that !important is not part of the property grammar
Split Security and Privacy into separate sections
Defined the terms CSS feature queries and supports queries to refer to the conditional syntax of the @supports rules, to allow better cross-referencing.
Removed the “unknown” value in CSS feature queries’ boolean logic, defining unrecognized syntaxes as “false” instead. (Issue 6175)
Clarified placement of conditional group rules. (Issue 5697)

Conditional group rules are allowed wherever style rules are allowed ( at the top-level of a style sheet, ~~and inside~~ as well as within other conditional group rules ) . CSS processors must process such rules as described above.

Any at- rules that are not allowed after a style rule (e.g., @charset , @import , or @namespace rules) are also not allowed after a conditional group rule ~~. Therefore, style sheets must not place such rules after a conditional group rule, and CSS processors must ignore such rules.~~ , and are therefore invalid when so placed.

The following (non-editorial) changes were made to this specification since the 4 April 2013 Candidate Recommendation:

Clarified that namespaces in conditionText are invalid
New editors added
Added explicit call to parse rather than "matches the grammar"
Removed duplicate CSSGroupingRule, which is already defined by CSSOM
Rewrote the supports() text into algorithm form, to make it easier to express that you pay attention to the syntax of registered custom properties in the supports(prop, val) form.
Moved the definition of @supports selector to css-conditional-4.
@supports' is no longer at risk.
Rewrote to use CSS Syntax grammars, not CSS 2.1 grammars
Changed from CSS Interface to WebIDL-compatible CSS namespace
Dropped requirement for spaces around and, or, and not keywords for consistency with Media Queries (which are themselves constrained by compatibility with the output of some CSS minimizers that rely on some of the more arcane aspects of CSS tokenization). Note that white space--or a comment--is still required after these keywords, since without it they and the ensuing opening parenthesis will be tokenized as a function opening token.
Allowed the supports() method to imply parentheses for simple declarations, for consistency with the @import rule’s supports() function.
Fixed missing semicolons in IDL code.
Updated links, terminology, and example code in response to changes to other modules.
Spelling and grammatical corrections
Added section on privacy and security considerations.

Acknowledgments

Thanks to the ideas and feedback from Tab Atkins, Arthur Barstow, Ben Callahan, Tantek Çelik, Alex Danilo, Elika Etemad, Pascal Germroth, Björn Höhrmann, Paul Irish, Brad Kemper, Anne van Kesteren, Vitor Menezes, Alex Mogilevsky, Chris Moschini, James Nurthen, Simon Pieters, Florian Rivoal, Simon Sapin, Nicholas Shanks, Ben Ward, Zack Weinberg, Estelle Weyl, Boris Zbarsky, and all the rest of the www-style community.

Conformance

Document conventions

Conformance requirements are expressed with a combination of descriptive assertions and RFC 2119 terminology. The key words “MUST”, “MUST NOT”, “REQUIRED”, “SHALL”, “SHALL NOT”, “SHOULD”, “SHOULD NOT”, “RECOMMENDED”, “MAY”, and “OPTIONAL” in the normative parts of this document are to be interpreted as described in RFC 2119. However, for readability, these words do not appear in all uppercase letters in this specification.

All of the text of this specification is normative except sections explicitly marked as non-normative, examples, and notes. [RFC2119]

Examples in this specification are introduced with the words “for example” or are set apart from the normative text with class="example", like this:

Informative notes begin with the word “Note” and are set apart from the normative text with class="note", like this:

Advisements are normative sections styled to evoke special attention and are set apart from other normative text with <strong class="advisement">, like this: UAs MUST provide an accessible alternative.

Conformance classes

A style sheet is conformant to this specification if all of its statements that use syntax defined in this module are valid according to the generic CSS grammar and the individual grammars of each feature defined in this module.

A renderer is conformant to this specification if, in addition to interpreting the style sheet as defined by the appropriate specifications, it supports all the features defined by this specification by parsing them correctly and rendering the document accordingly. However, the inability of a UA to correctly render a document due to limitations of the device does not make the UA non-conformant. (For example, a UA is not required to render color on a monochrome monitor.)

An authoring tool is conformant to this specification if it writes style sheets that are syntactically correct according to the generic CSS grammar and the individual grammars of each feature in this module, and meet all other conformance requirements of style sheets as described in this module.

Partial implementations

So that authors can exploit the forward-compatible parsing rules to assign fallback values, CSS renderers must treat as invalid (and ignore as appropriate) any at-rules, properties, property values, keywords, and other syntactic constructs for which they have no usable level of support. In particular, user agents must not selectively ignore unsupported component values and honor supported values in a single multi-value property declaration: if any value is considered invalid (as unsupported values must be), CSS requires that the entire declaration be ignored.

Implementations of Unstable and Proprietary Features

Non-experimental implementations

Once a specification reaches the Candidate Recommendation stage, non-experimental implementations are possible, and implementors should release an unprefixed implementation of any CR-level feature they can demonstrate to be correctly implemented according to spec.

To establish and maintain the interoperability of CSS across implementations, the CSS Working Group requests that non-experimental CSS renderers submit an implementation report (and, if necessary, the testcases used for that implementation report) to the W3C before releasing an unprefixed implementation of any CSS features. Testcases submitted to W3C are subject to review and correction by the CSS Working Group.

Further information on submitting testcases and implementation reports can be found from on the CSS Working Group’s website at http://www.w3.org/Style/CSS/Test/. Questions should be directed to the [email protected] mailing list.

CSS Conditional Rules Module Level 3

Abstract

Status of this document

1. Introduction

1.1. Background

1.2. Module Interactions

2. Processing of conditional group rules

3. Contents of conditional group rules

4. Placement of conditional group rules

5. Media-specific style sheets: the @media rule

6. Feature queries: the @supports rule

6.1. Definition of support

7. APIs

7.1. Extensions to the `CSSRule` interface

7.2. The `CSSConditionRule` interface

7.3. The `CSSMediaRule` interface

7.4. The `CSSSupportsRule` interface

7.5. The `CSS` namespace, and the `supports()` function

Security Considerations

Privacy Considerations

8. Changes

Acknowledgments

Conformance

Document conventions

Conformance classes

Partial implementations

Implementations of Unstable and Proprietary Features

Non-experimental implementations

Index

Terms defined by this specification

Terms defined by reference

References

Normative References

Informative References

IDL Index

CSS Conditional Rules Module Level 3

Abstract

Status of this document

1. Introduction

1.1. Background

1.2. Module Interactions

2. Processing of conditional group rules

3. Contents of conditional group rules

4. Placement of conditional group rules

5. Media-specific style sheets: the @media rule

6. Feature queries: the @supports rule

6.1. Definition of support

7. APIs

7.1. Extensions to the CSSRule interface

7.2. The CSSConditionRule interface

7.3. The CSSMediaRule interface

7.4. The CSSSupportsRule interface

7.5. The CSS namespace, and the supports() function

Security Considerations

Privacy Considerations

8. Changes

Acknowledgments

Conformance

Document conventions

Conformance classes

Partial implementations

Implementations of Unstable and Proprietary Features

Non-experimental implementations

Index

Terms defined by this specification

Terms defined by reference

References

Normative References

Informative References

IDL Index

7.1. Extensions to the `CSSRule` interface

7.2. The `CSSConditionRule` interface

7.3. The `CSSMediaRule` interface

7.4. The `CSSSupportsRule` interface

7.5. The `CSS` namespace, and the `supports()` function