nto-qnx

Tier: 3

QNX® Neutrino (nto) Real-time operating system. The support has been implemented jointly by Elektrobit Automotive GmbH and Blackberry QNX.

Target maintainers

Florian Bartels, [email protected], https://github.com/flba-eb
Tristan Roach, [email protected], https://github.com/gh-tr
Jonathan Pallant [email protected], https://github.com/jonathanpallant
Jorge Aparicio [email protected], https://github.com/japaric

Requirements

Currently, the following QNX Neutrino versions and compilation targets are supported:

QNX Neutrino Version	Target Architecture	Full support	`no_std` support
7.1	AArch64	✓	✓
7.1	x86_64	✓	✓
7.0	AArch64	?	✓
7.0	x86		✓

Adding other architectures that are supported by QNX Neutrino is possible.

In the table above, 'full support' indicates support for building Rust applications with the full standard library. 'no_std support' indicates that only core and alloc are available.

For building or using the Rust toolchain for QNX Neutrino, the QNX Software Development Platform (SDP) must be installed and initialized. Initialization is usually done by sourcing qnxsdp-env.sh (this will be installed as part of the SDP, see also installation instruction provided with the SDP). Afterwards qcc (QNX C/C compiler) should be available (in the $PATH variable). qcc will be called e.g. for linking executables.

When linking no_std applications, they must link against libc.so (see example). This is required because applications always link against the crt library and crt depends on libc.so. This is done automatically when using the standard library.

Disabling RELocation Read-Only (RELRO)

While not recommended by default, some QNX kernel setups may require the RELRO to be disabled with -C relro_level=off, e.g. by adding it to the .cargo/config.toml file:

[target.aarch64-unknown-nto-qnx700]
rustflags = ["-C", "relro_level=off"]

If your QNX kernel does not allow it, and relro is not disabled, running compiled binary would fail with syntax error: ... unexpected or similar. This is due to kernel trying to interpret compiled binary with /bin/sh, and obviously failing. To verify that this is really the case, run your binary with the DL_DEBUG=all env var, and look for this output. If you see it, you should disable relro as described above.

Resolution scope for Executable->/bin/sh:
        Executable->/bin/sh
        libc.so.4->/usr/lib/ldqnx-64.so.2

Small example application

Small no_std example is shown below. Applications using the standard library work as well.

#![no_std]
#![no_main]
#![feature(lang_items)]

// We must always link against libc, even if no external functions are used
// "extern C" - Block can be empty but must be present
#[link(name = "c")]
extern "C" {
    pub fn printf(format: *const core::ffi::c_char, ...) -> core::ffi::c_int;
}

#[no_mangle]
pub extern "C" fn main(_argc: isize, _argv: *const *const u8) -> isize {
    const HELLO: &'static str = "Hello World, the answer is %d\n\0";
    unsafe {
        printf(HELLO.as_ptr() as *const _, 42);
    }
    0
}

use core::panic::PanicInfo;

#[panic_handler]
fn panic(_panic: &PanicInfo<'_>) -> ! {
    loop {}
}

#[lang = "eh_personality"]
#[no_mangle]
pub extern "C" fn rust_eh_personality() {}

The QNX Neutrino support of Rust has been tested with QNX Neutrino 7.0 and 7.1.

There are no further known requirements.

Conditional compilation

For conditional compilation, following QNX Neutrino specific attributes are defined:

target_os = "nto"
target_env = "nto71" (for QNX Neutrino 7.1)
target_env = "nto70" (for QNX Neutrino 7.0)

Building the target

Create a config.toml

Example content:

profile = "compiler"
change-id = 115898

Compile the Rust toolchain for an x86_64-unknown-linux-gnu host (for both aarch64 and x86_64 targets)

Compiling the Rust toolchain requires the same environment variables used for compiling C binaries. Refer to the QNX developer manual.

To compile for QNX Neutrino (aarch64 and x86_64) and Linux (x86_64):

export build_env='
    CC_aarch64-unknown-nto-qnx710=qcc
    CFLAGS_aarch64-unknown-nto-qnx710=-Vgcc_ntoaarch64le_cxx
    CXX_aarch64-unknown-nto-qnx710=qcc
    AR_aarch64_unknown_nto_qnx710=ntoaarch64-ar
    CC_x86_64-pc-nto-qnx710=qcc
    CFLAGS_x86_64-pc-nto-qnx710=-Vgcc_ntox86_64_cxx
    CXX_x86_64-pc-nto-qnx710=qcc
    AR_x86_64_pc_nto_qnx710=ntox86_64-ar'

env $build_env \
    ./x.py build \
        --target aarch64-unknown-nto-qnx710,x86_64-pc-nto-qnx710,x86_64-unknown-linux-gnu \
        rustc library/core library/alloc library/std

Running the Rust test suite

The test suites of the Rust compiler and standard library can be executed much like other Rust targets. The environment for testing should match the one used during compiler compilation (refer to build_env and qcc/PATH above) with the addition of the TEST_DEVICE_ADDR environment variable. The TEST_DEVICE_ADDR variable controls the remote runner and should point to the target, despite localhost being shown in the following example. Note that some tests are failing which is why they are currently excluded by the target maintainers which can be seen in the following example.

To run all tests on a x86_64 QNX Neutrino target:

export TEST_DEVICE_ADDR="localhost:12345" # must address the test target, can be a SSH tunnel
export build_env='
    CC_aarch64-unknown-nto-qnx710=qcc
    CFLAGS_aarch64-unknown-nto-qnx710=-Vgcc_ntoaarch64le_cxx
    CXX_aarch64-unknown-nto-qnx710=qcc
    AR_aarch64_unknown_nto_qnx710=ntoaarch64-ar
    CC_x86_64-pc-nto-qnx710=qcc
    CFLAGS_x86_64-pc-nto-qnx710=-Vgcc_ntox86_64_cxx
    CXX_x86_64-pc-nto-qnx710=qcc
    AR_x86_64_pc_nto_qnx710=ntox86_64-ar'

# Disable tests that only work on the host or don't make sense for this target.
# See also:
# - src/ci/docker/host-x86_64/i686-gnu/Dockerfile
# - https://rust-lang.zulipchat.com/#narrow/stream/182449-t-compiler.2Fhelp/topic/Running.20tests.20on.20remote.20target
# - .github/workflows/ci.yml
export exclude_tests='
    --exclude src/bootstrap
    --exclude src/tools/error_index_generator
    --exclude src/tools/linkchecker
    --exclude tests/ui-fulldeps
    --exclude rustc
    --exclude rustdoc'

env $build_env \
    ./x.py test \
        $exclude_tests \
        --stage 1 \
        --target x86_64-pc-nto-qnx710

Building Rust programs

Rust does not yet ship pre-compiled artifacts for this target. To compile for this target, you must either build Rust with the target enabled (see "Building the target" above), or build your own copy of core by using build-std or similar.

Testing

Compiled executables can run directly on QNX Neutrino.

Rust std library test suite

The target needs sufficient resources to execute all tests. The commands below assume that a QEMU image is used.

Ensure that the temporary directory used by remote-test-server has enough free space and inodes. 5GB of free space and 40000 inodes are known to be sufficient (the test will create more than 32k files). To create a QEMU image in an empty directory, run this command inside the directory:
```
mkqnximage --type=qemu --ssh-ident=$HOME/.ssh/id_ed25519.pub --data-size=5000 --data-inodes=40000
```
/data should have enough free resources. Set the TMPDIR environment variable accordingly when running remote-test-server, e.g.:
```
TMPDIR=/data/tmp/rust remote-test-server --bind 0.0.0.0:12345
```
Ensure the TCP stack can handle enough parallel connections (default is 200, should be 300 or higher). After creating an image (see above), edit the file output/build/startup.sh:
1. Search for io-pkt-v6-hc
2. Add the parameter -ptcpip threads_max=300, e.g.:
```
io-pkt-v6-hc -U 33:33 -d e1000 -ptcpip threads_max=300
```
3. Update the image by running mkqnximage again with the same parameters as above for creating it.
Running and stopping the virtual machine

To start the virtual machine, run inside the directory of the VM:
```
mkqnximage --run=-h
```
To stop the virtual machine, run inside the directory of the VM:
```
mkqnximage --stop
```
Ensure local networking

Ensure that 'localhost' is getting resolved to 127.0.0.1. If you can't ping the localhost, some tests may fail. Ensure it's appended to /etc/hosts (if first ping command fails). Commands have to be executed inside the virtual machine!
```
$ ping localhost
ping: Cannot resolve "localhost" (Host name lookup failure)

$ echo "127.0.0.1 localhost" >> /etc/hosts

$ ping localhost
PING localhost (127.0.0.1): 56 data bytes
64 bytes from 127.0.0.1: icmp_seq=0 ttl=255 time=1 ms
```

Cross-compilation toolchains and C code

Compiling C code requires the same environment variables to be set as compiling the Rust toolchain (see above), to ensure qcc is used with proper arguments. To ensure compatibility, do not specify any further arguments that for example change calling conventions or memory layout.

The rustc book