Center for Industriel 3D-print - Teknologisk Institut

Materials technology company Diamond Hard Surfaces Ltd has partnered with the University of Wolverhampton’s AM research spinout, ADDITIVE ANALYTICS, to investigate the development of embedded electronic heat spreaders aimed at enhancing performance, according to a 3D Printing Industry article 📃 Similar to heat sink geometries, these components are critical for managing #thermal dissipation in electronics and CPUs. Traditional subtractive manufacturing techniques have historically limited the complexity of heat spreader designs. The project emphasizes the use of #3Dprinting technologies to fabricate heat spreaders with complex geometries and enhanced material properties, promising better heat dissipation efficiency compared to conventional manufacturing approaches 🌟♨   At the Danish Technological Institute, we also have a strong focus on improving the performance of thermal components using #additivemanufacturing and #topology optimization, so if you are looking to improve the performance of your heating or cooling applications, reach out to business manager, Ellen M. J. Hedegaard, and find out how we can help 📞 https://lnkd.in/d5ecSSKf

𝗗𝗶𝘀𝗰𝗼𝘃𝗲𝗿 𝗵𝗼𝘄 Brose Group 𝘀𝗹𝗮𝘀𝗵𝗲𝗱 𝗹𝗲𝗮𝗱 𝘁𝗶𝗺𝗲𝘀 𝗯𝘆 𝟵𝟬% 𝗮𝗻𝗱 𝗿𝗲𝗱𝘂𝗰𝗲𝗱 𝗰𝗼𝘀𝘁𝘀 𝗯𝘆 𝟴𝟬% 𝘄𝗶𝘁𝗵 𝗺𝗲𝘁𝗮𝗹 #3Dprinting - 𝘄𝗵𝗶𝗹𝗲 𝗺𝗮𝗶𝗻𝘁𝗮𝗶𝗻𝗶𝗻𝗴 𝗵𝗶𝗴𝗵 𝗾𝘂𝗮𝗹𝗶𝘁𝘆👀🎇 Brose is renowned as one of the five largest family-owned automotive suppliers in the world, and their century-long legacy is reflected in every third new car worldwide 🚗 In collaboration with Nikon SLM Solutions, Brose is now setting new standards in automotive prototyping, and by using metal #additivemanufacturing. Specifically, AM has yielded: • Lead times reduced from over 20 weeks to less than two 💨 • Cost savings of approximately 80% 📉 • High-quality, 3D-printed parts that replicate the quality of parts produced via serial manufacturing processes 💪 Read the full case from Nikon SLM Solutions here: https://lnkd.in/erq6Hh66 If you are interested in utilizing AM to optimize performance, reduce lead time, and achieve costs savings, don't hesitate to reach out to Brian Lykke Christensen at the Danish Technological Institute 📞 We have the same 3D printer as the one used in this case 😉

𝗪𝗘 𝗔𝗥𝗘 𝗛𝗜𝗥𝗜𝗡𝗚 😃 And this time it is not a position that requires extensive knowledge about #3Dprinting We are looking for a student worker to help us with digital marketing, so if you can analyze data and use it to optimize campaigns, increase online visibility, and generate conversions, this is a great match for your skillset 👍👨💻 Learn more about the position and apply via this link: https://lnkd.in/dz7K6sDx (the posting is in Danish, but the right candidate will most likely find a way to translate it 😉 It is not a requirement that you are Danish-speaking, and applications in English are also welcome). If you have any questions about the position, just reach out to team manager Kristoffer Ryelund Nielsen - his contact info can be found in the job posting 📞

#Addivemanufacturing improves cooling of chips for servers and PCs ❗ Chips in computers and servers can overheat, and when that happens, performance deteriorates, and the component's lifespan is shortened 📉👎 That is why they need to be cooled, and an effective way to cool IT components is to immerse the heat-generating elements in a liquid that is continuously cooled – that is, what is called immersive cooling 🤔 Now, the company CAAS ApS - together with AM specialists from the Danish Technological Institute -  has shown that you can use #3Dprinting as a fast, flexible, and cost-effective method to produce custom-designed tanks for the rapidly growing market for immersive cooling 🌟❄ They did that in a demonstration project from MADE - Manufacturing Academy of Denmark 🤝   Learn more about the project results via the link below - and if you are looking to improve your cooling solution using 3D printing, reach out to our AM design specialist, Malthe Gissel who was in charge of this project 📞 MADE demonstration projects are co-financed by the European Regional Development Fund and the Danish Executive Board for Business Development and Growth. https://lnkd.in/d5Qn2DrM

New smartwatches from global consumer electronics company Apple will include components made with metal #3Dprinting, according to an article from 3D Printing Industry ⌚🍎 The US-based tech giant will reportedly include parts 3D printed by Chinese 3D printer manufacturer Bright Laser Technologies - BLT in its Apple Watch Series 10 🌟 The predictions were published in a blog post earlier this year, and they follow news last year that Apple was testing binder jet 3D printers from BLT to produce its Apple Watch Series 9. The new report indicates that BLT has now joined Apple’s component supply chain, directly producing end-use parts for the company 🏭 Apple’s growing adoption of 3D printing could mark a significant milestone for #additivemanufacturing, potentially accelerating its use for mass production of consumer electronics ... something that we would naturally welcome here at the Danish Technological Institute, where it our mission to promote an increased uptake of AM 👏   https://lnkd.in/du5gDKkB

According to an article from 3D Printing Industry, a step forward in medical technology was achieved with the successful implantation of the first 3D printed ceramic subperiosteal jaw implant at Kepler Universitätsklinikum GmbH 💀👏 The procedure is part of the INKplantEU project, an #EU-funded initiative involving 19 interdisciplinary partners. The 3D printed dental implant, which was developed by Austrian ceramic #3Dprinting specialist Lithoz and led by PROFACTOR, targets patients suffering from severe jaw atrophy—a condition where the loss of teeth leads to significant bone deterioration, making traditional dentures or implants untenable. Typically, treatment would require invasive bone grafting that is unsuitable for many elderly patients due to associated health risks. However, this innovative implant requires no bone grafting and is designed to minimize surgical intervention and recovery time. Read more in the article below 👇 https://lnkd.in/du8zEBwT

FoodTech - Processing & Packaging 2024 is just around the corner, and we can't wait to showcase all the awesome #3Dprinting cases that we have made for the #food industry 🙌 𝗧𝗵𝗲 𝗲𝘅𝗵𝗶𝗯𝗶𝘁𝗶𝗼𝗻 𝘁𝗮𝗸𝗲𝘀 𝗽𝗹𝗮𝗰𝗲 𝗢𝗰𝘁𝗼𝗯𝗲𝗿 𝟭𝘀𝘁-𝟯𝗿𝗱 𝗶𝗻 MCH A/S, 𝗮𝗻𝗱 𝘆𝗼𝘂 𝘄𝗶𝗹𝗹 𝗳𝗶𝗻𝗱 𝘂𝘀 𝗮𝘁 𝗞𝟴𝟬𝟯𝟱 📍📅 As some of you may know, the Danish Technological Institute has quite a unique position when it comes to 3D printing for food contact applications, as we are one of the few manufacturers, whose #AdditiveManufacturing production complies with food regulations, and we offer to print in several materials that are approved for food contact - even some that are specially developed for the food industry 💡🍖 If you are ready to take advantage of the huge potential that AM offers for food industry applications, or if you want to set up a meeting during the FoodTech exhibition, please reach out to Brian Lykke Christensen 📞 You are of course also more than welcome to just stop by our booth ... see you there 👋 Visit our exhibition profile here: https://lnkd.in/dK7crt4r

Can I get a McAdditive please ❓🍔 Unfortunately not (yet)...but you may soon be able to enjoy #additivemanufacturing in your local McDonald's restaurant 😮 The fast food giant has partnered with Philips MyCreation, a division of Philips, to implement a novel lighting design concept using #3Dprinting 💡 According to 3D Printing Industry, the plan is to install custom 3D printed light fixtures in all 38,000 McDonald’s locations, featuring unique embossed circular pendants. By producing these lampshades with #recyclable materials at nearby facilities, McDonald’s aims to reduce shipping pollution, cut utility costs, and minimize waste compared to traditional methods ♻📉💰 By using at least 55% recycled or bio-circular plastics and producing lamp shades locally, transport emissions were reduced and delivery times shortened. Furthermore, on-demand production eliminated the need for large inventories. Read the full article via the link below 👇 And if your company is looking for a uniquely designed lighting solution made with AM, reach out to Brian Lykke Christensen at the Danish Technological Institute and find out how we can help 📞 https://lnkd.in/gb_8JxMs

We are excited to announce that we will be exhibiting at Scandinavia's largest conference on #AdditiveManufacturing this October - AM Summit 2024 which is organized by Danish AM Hub 🎉 If you are curious about the future of production technology, #sustainable production, and industrial #3Dprinting, then AM Summit 2024 is the event you don’t want to miss. At the Danish Technological Institute, we would really like to connect with you, so if you use this code "TeknologiskInstitutNetwork" you will get a discount of 30% on your ticket 🤑   This event is an essential meeting point for professionals in 3D printing and manufacturing technology. It's a chance for us to connect with industry leaders, explore new collaborations, and showcase some of our most awesome AM cases 😲   If you are attending (and if you love AM, you ARE ❗), we invite you to visit our booth to discuss how we can work together - or simply just stop by for a chat 🤝🏼 🗓 Date: October 24th 📍 Location: Øksnehallen, Copenhagen 🔗 Get your ticket here: https://lnkd.in/edgS2Sk   SEE YOU THERE 👋

𝗔𝗿𝗲 𝘆𝗼𝘂 𝗰𝘂𝗿𝗶𝗼𝘂𝘀 𝘁𝗼 𝗹𝗲𝗮𝗿𝗻 𝗺𝗼𝗿𝗲 𝗮𝗯𝗼𝘂𝘁 𝗵𝗼𝘄 𝘆𝗼𝘂𝗿 𝗰𝗼𝗺𝗽𝗮𝗻𝘆 𝗰𝗮𝗻 𝗴𝗲𝘁 𝘀𝘂𝗽𝗽𝗼𝗿𝘁 𝘁𝗵𝗼𝘂𝗴𝗵 #EU 𝗽𝗿𝗼𝗷𝗲𝗰𝘁𝘀 - 𝗲.𝗴. 𝗽𝗿𝗼𝗷𝗲𝗰𝘁 𝗰𝗼𝗻𝗰𝗲𝗿𝗻𝗶𝗻𝗴 𝘁𝗵𝗲 𝘂𝘀𝗲 𝗼𝗳 #3Dprinting ❓ Then this webinar is for you ✔️ It is hosted by DigitalLead in collaboration with Danish Agency for Digital Government and Ministry of Higher Education, and it is on September 24th from 9:30-11:30 📅 In the webinar, you can meet Danish companies that have benefited from EU funding for #innovation projects through DIGITALEUROPE and Horizon Europe, Cluster 4: 'Digital, Industry and Space' 💰 There is also a presentation from the Danish Technological Institute's AM specialist, Christina Moeslund Zeuthen, who is the project manager of the Horizon Europe-funded DILAPRO Project , which aims to develop software that will change the way we plan, manufacture, and certify 3D-printed products 📣 You can see the full programme via the link below - participation is 𝗳𝗿𝗲𝗲 𝗼𝗳 𝗰𝗵𝗮𝗿𝗴𝗲, but you do have to register 📝 https://lnkd.in/eguQ3rvv