PlasmaSolve s.r.o.

 🇨🇿PlasmaSolve introduces Czech Republic as the emerging chips powerhouse (part 3/3) 🇨🇿 From an article in the Czech economic daily E15:  Chips are created by "burning" integrated electrical circuits into nanometre-sized silicon wafers. And in the manufacture of processors, for example, the necessary spatial structures in silicon are created by plasma etching. The plasma coating technique is, in turn, used to deposit conductive and insulating layers on silicon. "On the nanometer scale, conductive contacts, joints and layers can only be deposited with sufficient precision using plasma technologies," explains PlasmaSolve CEO Adam Obrusník. However, layers of materials thinner than a thousandth of a human hair are deposited by expensive machines that take a long time to set up and often operate by trial and error. This is where the Czech simulation tool #MatSight comes in, which models plasma technologies in software. It simplifies the process of designing and setting up the machines by using physics-based #simulations, #machinelearning, and #datamining P.S.: Have you already read our posts from Monday and Wednesday? 😉

🇨🇿PlasmaSolve shares some exciting news (part 2/3) = Czech Republic as the emerging chips powerhouse 🇨🇿 Exciting news in the semiconductor industry! Not only is onsemi investing up to $2 billion in the Czech Republic for expansion, but other major players like Analog Bits, STMicroelectronics, NXP Semiconductors, ASICentrum spol. s r.o., Codasip and more are already on board. Even Forbes Czech edition mentiones PlasmaSolve s.r.o. as a player in the future of chip manufacturing 😊 thanks to our rather unique know-how in simulation. 🔐 Link to the article in English below. 🔑 Unlocked version available upon request. https://lnkd.in/eHr99cfp #Semiconductors #CzechRepublic #Innovation #ChipManufacturing

🇨🇿 PlasmaSolve sharing some exciting news (1/3): Czech Republic emerges as a chips powerhouse! 🇨🇿 Onsemi's monumental investment of up to $2 billion in the Czech Republic for semiconductor production marks a historic milestone for the country. This substantial commitment, surpassing other global contenders like South Korea and the USA, showcases the Czech Republic's strategic advantage. The ripple effect of Onsemi's investment is set to benefit a plethora of local suppliers and service providers, paving the way for significant growth opportunities. PlasmaSolve's innovative #MatSight software, a game-changer in simulation-driven engineering of #thin #film #coating equipment and #etching equipment, is at the forefront of this transformative journey. With the ability to simulate various thin-film coatings, MatSight is revolutionizing the industry landscape. #PlasmaSolve #CzechRepublic #SemiconductorIndustry #Innovation #MatSight #Simulation https://lnkd.in/gkZJWWBH

This year, PlasmaSolve has been traveling A LOT 🛫 🛬 . We have already been to the 🇺🇸hashtag #SVCTechCon🇺🇸 , 🇺🇸hashtag #ICMCTF🇺🇸 trade shows and we are going to 🇪🇺hashtag #PSE🇩🇪 in September, as well as several regional events throughout the year. Supporting such a presence for a small company like ours has always been a challenge ... for obvious reasons 💸 💸💸 . But this year, it got significantly easier thanks to Ministry of Industry and Trade of the Czech Republic and their pro-export programme, where they covered about 50% of our travel expenses for trade shows. And that makes a big difference! I think this is a great example of meaningful government incentive - focused, well-defined, aimed at small companies👏 🙌 👏🙌 👏. We are proud to represent European and Czech industry overseas as well as close to home 🇪🇺🇨🇿! And a part of the funds we save is re-invested to sponsoring these wonderful events, so everybody wins 😉 . Project „Export support for PlasmaSolve through participation in international events in 2024“, reg. no. CZ.01.02.01/04/23_017/0001928 is co-funded by the European Union. The aim of the project is to strengthen PlasmaSolve's export activities through participation in international events. These are three specific international conferences and trade fairs, which are among the most important events in the coating technology industry.

Apparently, we're doing keynotes now ... a regional event but very motivating nonetheless 👍

Going live in 45 minutes 😮

Have you already registered for the #MatSight #simulation #software lauch event? (btw, we promise to post less after the event 😉 ). Possibly the main reason why #PVD and #PECVD #coating and #process engineers are skeptical towards integrating simulations 🖥 into their daily routines is the concern that models cannot reproduce real-life scenarios. So here is an example of #MatSight 3D Uniformity App simulating 12 CAD-imported milling tools loaded in a tree, top fixture included, all undergoing 3-axis rotation! The coating process we considered in this #digital #twin example is highly ionized #HiPIMS. How many batchings and loading layouts can you simulate in one business day? Probably more than you would guess 😊, register for the launch event and find out https://matsight.com/ 🚀 . It will cost an hour of your time, and the potential for optimizing and speeding up your workflows is tremendous! Thanks to the 70 people who already registered! We will make this a good use of your time 👍 .

Are you working in the field of #large #area #PVD #coaters (#inline or #roll2roll) or developing cathode components for these coaters? Then I have a #MatSight case study for you to share - our Target Erosion App allows you to predict the racetrack shape (erosion groove) for various magnet arrays, pressures, powers, or cathode materials. What is more? You can do that at planar or rectangular cathodes at power levels which are typical for industrial coaters. Our early adopters have actually used this #simulation software to simulate 4-meter long glass coater🪟 cathodes ❗ . Below is a snapshot of target erosion in a dual magnetron in a roll2roll coater - I think you can guess which cathode is currently sputtering and which is positive 😉 - and we are looking at the erosion as well as the plasma distribution. How would this picture change with pressure? And with power? If you want to know, tune in to our launch event 🚀 for #MatSight by #PlasmaSolve on April 24. I will be giving away a bit of know how there, so should be time well spent 🎉 . The logistics of the event is here: https://matsight.com/. Kudos to Kryštof Mrózek for preparing this content.