处理消息失败问题

订阅者可能会因各种原因而无法处理消息。例如,在检索处理消息所需的数据时,可能会出现暂时性问题。或者,消息采用订阅者意料之外的格式。

本页面介绍了如何使用 订阅重试政策,或者将未传送的消息转发到死信主题 (也称为死信队列)。

请注意,Dataflow 不支持这些功能。如需了解详情,请参阅 Dataflow 文档的不支持的 Pub/Sub 功能部分。

订阅重试政策

如果 Pub/Sub 尝试传送消息,但订阅方无法传送消息 确认后,Pub/Sub 会自动尝试重新发送消息。 这种重新提交尝试称为订阅重试政策。这不是 一项可开启或关闭的功能不过,您可以选择 政策。

首次创建和配置订阅时,您可以选择使用以下重试政策之一:立即重新提交指数退避算法。默认情况下,订阅使用立即重新提交。

立即重新提交

默认情况下,Pub/Sub 会立即尝试重新发送消息(可能会发送给同一订阅器客户端)。但是,如果阻止消息确认的条件没有改变,立即重新传送可能会导致问题。在这种情况下,Pub/Sub 可能会重新发送多个无法确认的消息。

为了解决立即重新提交问题,Pub/Sub 允许您配置指数退避算法政策。

指数退避算法

借助指数退避,您可以在重试尝试之间逐步增加延迟时间。第一次传送失败后,Pub/Sub 会等待 重试之前必须等待的最短退避时间。对于每一条连续失败的消息, 增加的时间,最多为最大延迟(0 和 600 秒)。

最大和最小延迟间隔不固定,应根据应用的本地因素进行配置。

请注意以下有关指数退避算法的注意事项:

  • 指数退避算法会在以下操作执行时触发:
    • 收到否定确认时。
    • 消息的确认截止期限到期。
  • 指数退避仅应用于每条消息,而不是应用于订阅中的所有消息(全局)。
  • 在使用指数退避算法的情况下,Pub/Sub 仍会 其他消息,即使之前的消息收到了负面确认 (除非您使用有序邮件递送)。

使用重试政策延迟部分内容的传送和处理 消息,以应对发生以下情形的暂时无法处理某些消息的问题 。系统会尽力应用此功能,并对每封邮件单独评估重试政策。

我们不建议使用此功能故意延迟 消息传送。如果您发现大量负面反馈, 则有可能 部分消息在传送时没有退避或没有退避。 如果出现以下情况,Pub/Sub 也可能会减慢所有消息的传送速度: 大量消息

如果您需要安排送货时间,可以考虑使用 Cloud Tasks

配置指数退避算法

控制台

创建新订阅时,您可以执行以下步骤来配置指数退避算法重试政策:

  1. 在 Google Cloud 控制台中,前往 Pub/Sub 订阅页面。

    前往“订阅”页面

  2. 点击创建订阅

  3. 订阅 ID 字段中,输入名称。

    如需了解如何命名订阅,请参阅主题或订阅命名准则

  4. 从下拉菜单中选择或创建一个主题。

    订阅将接收来自该主题的消息。

  5. 选择投放类型

  6. 重试政策下,选择使用指数退避算法后重试

  7. 输入退避时间下限退避时长上限(介于 0 到 600 秒之间)。

    最短退避时间的默认值为 10 秒,最长退避时间的默认值为 600 秒。

  8. 点击创建

gcloud

如需使用指数退避算法重试政策创建新订阅,请使用下面显示的标志运行 gcloud pubsub create 命令:

gcloud pubsub subscriptions create SUBSCRIPTION_ID \
  --topic=TOPIC_ID \
  --min-retry-delay=MIN_RETRY_DELAY \
  --max-retry-delay=MAX_RETRY_DELAY

死信主题

如果 Pub/Sub 服务尝试传送消息,但 则 Pub/Sub 可以转发 无法传送的消息。

死信主题如何与 Pub/Sub 搭配使用

死信主题是订阅属性,而不是主题属性。这意味着,您是在创建订阅时设置死信主题,而不是在创建主题时设置。

如果您创建了死信主题,则可以设置以下订阅属性:

  • 传送尝试次数上限:一个数值,表示 Pub/Sub 针对特定消息进行的传送尝试次数。如果订阅方客户端无法确认 在指定的传送尝试次数内发送,则视为 转发至死信主题。

    • 默认值 = 5
    • 最大值 = 100
    • 最小值 = 5
  • Project with the Dead-letter topic:如果死信主题位于 项目与订阅不同,则必须使用 死信主题将死信主题设为与以下主题不同的主题: 关联了该订阅。

如何计算传送尝试次数上限

只有在死信主题配置正确且包含正确的 IAM 权限时,Pub/Sub 才会统计传送尝试次数。

传送尝试次数上限是近似值,因为 Pub/Sub 会尽力转发无法传送的消息。

系统跟踪的消息传送尝试次数也可能会重置为零,尤其是对于包含非活跃订阅者的拉取订阅。因此,消息传送给订阅者客户端的次数可能会超过配置的传送尝试次数上限。

配置死信主题

如需配置死信主题,源主题必须先拥有订阅。 您可以在创建订阅时指定死信主题,也可以 更新现有订阅,使其包含死信主题。

以下是针对订阅启用死信的工作流程。

  1. 创建死信主题。此主题与来源主题是分开的。

  2. 在源主题的订阅上设置死信主题。

  3. 为避免丢失死信主题中的消息,请将至少一个其他订阅附加到死信主题。辅助订阅会接收消息 死信主题

  4. 为 Pub/Sub 授予 Publisher 和 Subscriber 角色 服务账号。如需了解详情,请参阅 授予转发权限

为新订阅设置死信主题

您可以使用 Google Cloud 控制台、Google Cloud CLI、客户端库或 Pub/Sub API。

控制台

如需创建订阅并设置死信主题,请完成以下步骤:

  1. 在 Google Cloud 控制台中,进入订阅页面。

    前往订阅页面

  2. 点击创建订阅

  3. 输入订阅 ID

  4. 从下拉菜单中选择或创建一个主题。

    订阅将接收来自该主题的消息。

  5. 死信部分,选择启用死信

  6. 从下拉菜单中选择或创建死信主题。

  7. 如果选定的死信主题没有订阅,系统会提示 创建一个。

  8. 最大传送尝试字段中,指定一个 5 到 100 之间的整数。

  9. 点击创建

  10. 详情面板会显示可能的操作列表。如果存在 个项目显示错误图标 ,点击 解决相应问题的操作项。

gcloud

如需创建订阅并设置死信主题,请使用 gcloud pubsub subscriptions create 命令:

gcloud pubsub subscriptions create subscription-id \
  --topic=topic-id \
  --dead-letter-topic=dead-letter-topic-name \
  [--max-delivery-attempts=max-delivery-attempts] \
  [--dead-letter-topic-project=dead-letter-topic-project]

C

在尝试此示例之前,请按照《快速入门:使用客户端库》中的 C 设置说明进行操作。如需了解详情,请参阅 Pub/Sub C API 参考文档

namespace pubsub = ::google::cloud::pubsub;
namespace pubsub_admin = ::google::cloud::pubsub_admin;
[](pubsub_admin::SubscriptionAdminClient client,
   std::string const& project_id, std::string const& topic_id,
   std::string const& subscription_id,
   std::string const& dead_letter_topic_id,
   int dead_letter_delivery_attempts) {
  google::pubsub::v1::Subscription request;
  request.set_name(
      pubsub::Subscription(project_id, subscription_id).FullName());
  request.set_topic(pubsub::Topic(project_id, topic_id).FullName());
  request.mutable_dead_letter_policy()->set_dead_letter_topic(
      pubsub::Topic(project_id, dead_letter_topic_id).FullName());
  request.mutable_dead_letter_policy()->set_max_delivery_attempts(
      dead_letter_delivery_attempts);
  auto sub = client.CreateSubscription(request);
  if (sub.status().code() == google::cloud::StatusCode::kAlreadyExists) {
    std::cout << "The subscription already exists\n";
    return;
  }
  if (!sub) throw std::move(sub).status();

  std::cout << "The subscription was successfully created: "
            << sub->DebugString() << "\n";

  std::cout << "It will forward dead letter messages to: "
            << sub->dead_letter_policy().dead_letter_topic() << "\n";

  std::cout << "After " << sub->dead_letter_policy().max_delivery_attempts()
            << " delivery attempts.\n";
}

C#

在尝试此示例之前,请按照《快速入门:使用客户端库》中的 C# 设置说明进行操作。 如需了解详情,请参阅 Pub/Sub C# API 参考文档


using Google.Cloud.PubSub.V1;
using System;

public class CreateSubscriptionWithDeadLetterPolicySample
{
    public Subscription CreateSubscriptionWithDeadLetterPolicy(string projectId, string topicId, string subscriptionId, string deadLetterTopicId)
    {
        SubscriberServiceApiClient subscriber = SubscriberServiceApiClient.Create();
        // This is the subscription you want to create with a dead letter policy.
        var subscriptionName = SubscriptionName.FromProjectSubscription(projectId, subscriptionId);
        // This is an existing topic that you want to attach the subscription with dead letter policy to.
        var topicName = TopicName.FromProjectTopic(projectId, topicId);
        // This is an existing topic that the subscription with dead letter policy forwards dead letter messages to.
        var deadLetterTopic = TopicName.FromProjectTopic(projectId, deadLetterTopicId).ToString();
        var subscriptionRequest = new Subscription
        {
            SubscriptionName = subscriptionName,
            TopicAsTopicName = topicName,
            DeadLetterPolicy = new DeadLetterPolicy
            {
                DeadLetterTopic = deadLetterTopic,
                // The maximum number of times that the service attempts to deliver a
                // message before forwarding it to the dead letter topic. Must be [5-100].
                MaxDeliveryAttempts = 10
            },
            AckDeadlineSeconds = 30
        };

        var subscription = subscriber.CreateSubscription(subscriptionRequest);
        Console.WriteLine("Created subscription: "   subscription.SubscriptionName.SubscriptionId);
        Console.WriteLine($"It will forward dead letter messages to: {subscription.DeadLetterPolicy.DeadLetterTopic}");
        Console.WriteLine($"After {subscription.DeadLetterPolicy.MaxDeliveryAttempts} delivery attempts.");
        // Remember to attach a subscription to the dead letter topic because
        // messages published to a topic with no subscriptions are lost.
        return subscription;
    }
}

Go

在尝试此示例之前,请按照《快速入门:使用客户端库》中的 Go 设置说明进行操作。 如需了解详情,请参阅 Pub/Sub Go API 参考文档

import (
	"context"
	"fmt"
	"io"
	"time"

	"cloud.google.com/go/pubsub"
)

// createSubWithDeadLetter creates a subscription with a dead letter policy.
func createSubWithDeadLetter(w io.Writer, projectID, subID string, topicID string, fullyQualifiedDeadLetterTopic string) error {
	// projectID := "my-project-id"
	// subID := "my-sub"
	// topicID := "my-topic"
	// fullyQualifiedDeadLetterTopic := "projects/my-project/topics/my-dead-letter-topic"
	ctx := context.Background()
	client, err := pubsub.NewClient(ctx, projectID)
	if err != nil {
		return fmt.Errorf("pubsub.NewClient: %w", err)
	}
	defer client.Close()

	topic := client.Topic(topicID)

	subConfig := pubsub.SubscriptionConfig{
		Topic:       topic,
		AckDeadline: 20 * time.Second,
		DeadLetterPolicy: &pubsub.DeadLetterPolicy{
			DeadLetterTopic:     fullyQualifiedDeadLetterTopic,
			MaxDeliveryAttempts: 10,
		},
	}

	sub, err := client.CreateSubscription(ctx, subID, subConfig)
	if err != nil {
		return fmt.Errorf("CreateSubscription: %w", err)
	}
	fmt.Fprintf(w, "Created subscription (%s) with dead letter topic (%s)\n", sub.String(), fullyQualifiedDeadLetterTopic)
	fmt.Fprintln(w, "To process dead letter messages, remember to add a subscription to your dead letter topic.")
	return nil
}

Java

在尝试此示例之前,请按照《快速入门:使用客户端库》中的 Java 设置说明进行操作。 如需了解详情,请参阅 Pub/Sub Java API 参考文档

import com.google.cloud.pubsub.v1.SubscriptionAdminClient;
import com.google.pubsub.v1.DeadLetterPolicy;
import com.google.pubsub.v1.ProjectSubscriptionName;
import com.google.pubsub.v1.ProjectTopicName;
import com.google.pubsub.v1.Subscription;
import java.io.IOException;

public class CreateSubscriptionWithDeadLetterPolicyExample {

  public static void main(String... args) throws Exception {
    // TODO(developer): Replace these variables before running the sample.
    String projectId = "your-project-id";
    // This is the subscription you want to create with a dead letter policy.
    String subscriptionId = "your-subscription-id";
    // This is an existing topic that you want to attach the subscription with dead letter policy
    // to.
    String topicId = "your-topic-id";
    // This is an existing topic that the subscription with dead letter policy forwards dead letter
    // messages to.
    String deadLetterTopicId = "your-dead-letter-topic-id";

    CreateSubscriptionWithDeadLetterPolicyExample.createSubscriptionWithDeadLetterPolicyExample(
        projectId, subscriptionId, topicId, deadLetterTopicId);
  }

  public static void createSubscriptionWithDeadLetterPolicyExample(
      String projectId, String subscriptionId, String topicId, String deadLetterTopicId)
      throws IOException {
    try (SubscriptionAdminClient subscriptionAdminClient = SubscriptionAdminClient.create()) {

      ProjectTopicName topicName = ProjectTopicName.of(projectId, topicId);
      ProjectSubscriptionName subscriptionName =
          ProjectSubscriptionName.of(projectId, subscriptionId);
      ProjectTopicName deadLetterTopicName = ProjectTopicName.of(projectId, deadLetterTopicId);

      DeadLetterPolicy deadLetterPolicy =
          DeadLetterPolicy.newBuilder()
              .setDeadLetterTopic(deadLetterTopicName.toString())
              // The maximum number of times that the service attempts to deliver a
              // message before forwarding it to the dead letter topic. Must be [5-100].
              .setMaxDeliveryAttempts(10)
              .build();

      Subscription request =
          Subscription.newBuilder()
              .setName(subscriptionName.toString())
              .setTopic(topicName.toString())
              .setDeadLetterPolicy(deadLetterPolicy)
              .build();

      Subscription subscription = subscriptionAdminClient.createSubscription(request);

      System.out.println("Created subscription: "   subscription.getName());
      System.out.println(
          "It will forward dead letter messages to: "
                subscription.getDeadLetterPolicy().getDeadLetterTopic());
      System.out.println(
          "After "
                subscription.getDeadLetterPolicy().getMaxDeliveryAttempts()
                " delivery attempts.");
      // Remember to attach a subscription to the dead letter topic because
      // messages published to a topic with no subscriptions are lost.
    }
  }
}

Node.js

在尝试此示例之前,请按照《快速入门:使用客户端库》中的 Node.js 设置说明进行操作。如需了解详情,请参阅 Pub/Sub Node.js API 参考文档

/**
 * TODO(developer): Uncomment these variables before running the sample.
 */
// const topicNameOrId = 'YOUR_TOPIC_NAME_OR_ID';
// const subscriptionNameOrId = 'YOUR_SUBSCRIPTION_NAME_OR_ID';
// const deadLetterTopicNameOrId = 'YOUR_DEAD_LETTER_TOPIC_NAME_OR_ID';

// Imports the Google Cloud client library
const {PubSub} = require('@google-cloud/pubsub');

// Creates a client; cache this for further use
const pubSubClient = new PubSub();

async function createSubscriptionWithDeadLetterPolicy(
  topicNameOrId,
  subscriptionNameOrId,
  deadLetterTopicNameOrId
) {
  // Creates a new subscription
  const options = {
    deadLetterPolicy: {
      deadLetterTopic: pubSubClient.topic(deadLetterTopicNameOrId).name,
      maxDeliveryAttempts: 10,
    },
  };
  await pubSubClient
    .topic(topicNameOrId)
    .createSubscription(subscriptionNameOrId, options);
  console.log(
    `Created subscription ${subscriptionNameOrId} with dead letter topic ${deadLetterTopicNameOrId}.`
  );
  console.log(
    'To process dead letter messages, remember to add a subscription to your dead letter topic.'
  );
}

Node.js

在尝试此示例之前,请按照《快速入门:使用客户端库》中的 Node.js 设置说明进行操作。如需了解详情,请参阅 Pub/Sub Node.js API 参考文档

/**
 * TODO(developer): Uncomment these variables before running the sample.
 */
// const topicNameOrId = 'YOUR_TOPIC_NAME_OR_ID';
// const subscriptionNameOrId = 'YOUR_SUBSCRIPTION_NAME_OR_ID';
// const deadLetterTopicNameOrId = 'YOUR_DEAD_LETTER_TOPIC_NAME_OR_ID';

// Imports the Google Cloud client library
import {PubSub, CreateSubscriptionOptions} from '@google-cloud/pubsub';

// Creates a client; cache this for further use
const pubSubClient = new PubSub();

async function createSubscriptionWithDeadLetterPolicy(
  topicNameOrId: string,
  subscriptionNameOrId: string,
  deadLetterTopicNameOrId: string
) {
  // Creates a new subscription
  const options: CreateSubscriptionOptions = {
    deadLetterPolicy: {
      deadLetterTopic: pubSubClient.topic(deadLetterTopicNameOrId).name,
      maxDeliveryAttempts: 10,
    },
  };
  await pubSubClient
    .topic(topicNameOrId)
    .createSubscription(subscriptionNameOrId, options);
  console.log(
    `Created subscription ${subscriptionNameOrId} with dead letter topic ${deadLetterTopicNameOrId}.`
  );
  console.log(
    'To process dead letter messages, remember to add a subscription to your dead letter topic.'
  );
}

PHP

在尝试此示例之前,请按照《快速入门:使用客户端库》中的 PHP 设置说明进行操作。如需了解详情,请参阅 Pub/Sub PHP API 参考文档

use Google\Cloud\PubSub\PubSubClient;

/**
 * Creates a Pub/Sub subscription with dead letter policy enabled.
 *
 * @param string $projectId  The Google project ID.
 * @param string $topicName  The Pub/Sub topic name.
 * @param string $subscriptionName  The Pub/Sub subscription name.
 * @param string $deadLetterTopicName The Pub/Sub topic to use for dead letter policy.
 */
function dead_letter_create_subscription($projectId, $topicName, $subscriptionName, $deadLetterTopicName)
{
    $pubsub = new PubSubClient([
        'projectId' => $projectId,
    ]);

    $topic = $pubsub->topic($topicName);
    $deadLetterTopic = $pubsub->topic($deadLetterTopicName);

    $subscription = $topic->subscribe($subscriptionName, [
        'deadLetterPolicy' => [
            'deadLetterTopic' => $deadLetterTopic
        ]
    ]);

    printf(
        'Subscription %s created with dead letter topic %s' . PHP_EOL,
        $subscription->name(),
        $deadLetterTopic->name()
    );
}

Python

在尝试此示例之前,请按照《快速入门:使用客户端库》中的 Python 设置说明进行操作。 如需了解详情,请参阅 Pub/Sub Python API 参考文档

from google.cloud import pubsub_v1
from google.cloud.pubsub_v1.types import DeadLetterPolicy

# TODO(developer)
# project_id = "your-project-id"
# endpoint = "https://my-test-project.appspot.com/push"
# TODO(developer): This is an existing topic that the subscription
# with dead letter policy is attached to.
# topic_id = "your-topic-id"
# TODO(developer): This is an existing subscription with a dead letter policy.
# subscription_id = "your-subscription-id"
# TODO(developer): This is an existing dead letter topic that the subscription
# with dead letter policy will forward dead letter messages to.
# dead_letter_topic_id = "your-dead-letter-topic-id"
# TODO(developer): This is the maximum number of delivery attempts allowed
# for a message before it gets delivered to a dead letter topic.
# max_delivery_attempts = 5

publisher = pubsub_v1.PublisherClient()
subscriber = pubsub_v1.SubscriberClient()

topic_path = publisher.topic_path(project_id, topic_id)
subscription_path = subscriber.subscription_path(project_id, subscription_id)
dead_letter_topic_path = publisher.topic_path(project_id, dead_letter_topic_id)

dead_letter_policy = DeadLetterPolicy(
    dead_letter_topic=dead_letter_topic_path,
    max_delivery_attempts=max_delivery_attempts,
)

with subscriber:
    request = {
        "name": subscription_path,
        "topic": topic_path,
        "dead_letter_policy": dead_letter_policy,
    }
    subscription = subscriber.create_subscription(request)

print(f"Subscription created: {subscription.name}")
print(
    f"It will forward dead letter messages to: {subscription.dead_letter_policy.dead_letter_topic}."
)
print(
    f"After {subscription.dead_letter_policy.max_delivery_attempts} delivery attempts."
)

Ruby

在尝试此示例之前,请按照《快速入门:使用客户端库》中的 Ruby 设置说明进行操作。 如需了解详情,请参阅 Pub/Sub Ruby API 参考文档

Ruby

在尝试此示例之前,请按照Ruby Pub/Sub 快速入门: 客户端库。 有关详情,请参阅 Pub/Sub Ruby API 参考文档

如需向 Pub/Sub 进行身份验证,请设置应用默认凭据。 如需了解详情,请参阅为本地开发环境设置身份验证

# topic_id             = "your-topic-id"
# subscription_id      = "your-subscription-id"
# dead_letter_topic_id = "your-dead-letter-topic-id"

pubsub = Google::Cloud::Pubsub.new

topic             = pubsub.topic topic_id
dead_letter_topic = pubsub.topic dead_letter_topic_id
subscription      = topic.subscribe subscription_id,
                                    dead_letter_topic:                 dead_letter_topic,
                                    dead_letter_max_delivery_attempts: 10

puts "Created subscription #{subscription_id} with dead letter topic #{dead_letter_topic_id}."
puts "To process dead letter messages, remember to add a subscription to your dead letter topic."

为现有订阅设置死信主题

您可以使用 Google Cloud 控制台、Google Cloud CLI、客户端库或 Pub/Sub API。

控制台

如需更新订阅并设置死信主题,请完成以下步骤。

  1. 在 Google Cloud 控制台中,进入订阅页面。

    前往订阅页面

  2. 在要更新的订阅旁边,点击更多操作

  3. 在上下文菜单中,选择编辑

    突出显示“修改”选项的上下文菜单。

  4. 死信部分,选择启用死信

  5. 从下拉菜单中选择或创建一个主题。

  6. 如果所选主题没有订阅,系统会提示您创建一个订阅。

  7. 传送尝试次数上限字段中,指定一个 5 到 100 之间的整数。

  8. 点击更新

  9. 详细信息面板会显示可用操作项的列表。如果任何项目显示错误图标 ,请点击相应操作项以解决问题。

gcloud

如需更新订阅并设置死信主题,请使用 gcloud pubsub subscriptions update 命令:

gcloud pubsub subscriptions update subscription-id \
  --dead-letter-topic=dead-letter-topic-name \
  [--max-delivery-attempts=max-delivery-attempts] \
  [--dead-letter-topic-project=dead-letter-topic-project]

C

在尝试此示例之前,请按照《快速入门:使用客户端库》中的 C 设置说明进行操作。如需了解详情,请参阅 Pub/Sub C API 参考文档

namespace pubsub_admin = ::google::cloud::pubsub_admin;
namespace pubsub = ::google::cloud::pubsub;
[](pubsub_admin::SubscriptionAdminClient client,
   std::string const& project_id, std::string const& subscription_id,
   std::string const& dead_letter_topic_id,
   int dead_letter_delivery_attempts) {
  google::pubsub::v1::UpdateSubscriptionRequest request;
  request.mutable_subscription()->set_name(
      pubsub::Subscription(project_id, subscription_id).FullName());
  request.mutable_subscription()
      ->mutable_dead_letter_policy()
      ->set_dead_letter_topic(
          pubsub::Topic(project_id, dead_letter_topic_id).FullName());
  request.mutable_subscription()
      ->mutable_dead_letter_policy()
      ->set_max_delivery_attempts(dead_letter_delivery_attempts);
  *request.mutable_update_mask()->add_paths() = "dead_letter_policy";
  auto sub = client.UpdateSubscription(request);
  if (!sub) throw std::move(sub).status();

  std::cout << "The subscription has been updated to: " << sub->DebugString()
            << "\n";

  std::cout << "It will forward dead letter messages to: "
            << sub->dead_letter_policy().dead_letter_topic() << "\n";

  std::cout << "After " << sub->dead_letter_policy().max_delivery_attempts()
            << " delivery attempts.\n";
}

C#

在尝试此示例之前,请按照《快速入门:使用客户端库》中的 C# 设置说明进行操作。 如需了解详情,请参阅 Pub/Sub C# API 参考文档


using Google.Cloud.PubSub.V1;
using Google.Protobuf.WellKnownTypes;

public class UpdateDeadLetterPolicySample
{
    public Subscription UpdateDeadLetterPolicy(string projectId, string topicId, string subscriptionId, string deadLetterTopicId)
    {
        SubscriberServiceApiClient subscriber = SubscriberServiceApiClient.Create();
        // This is an existing topic that the subscription with dead letter policy is attached to.
        TopicName topicName = TopicName.FromProjectTopic(projectId, topicId);
        // This is an existing subscription with a dead letter policy.
        SubscriptionName subscriptionName = SubscriptionName.FromProjectSubscription(projectId, subscriptionId);
        // This is an existing dead letter topic that the subscription with dead letter policy forwards
        // dead letter messages to.
        var deadLetterTopic = TopicName.FromProjectTopic(projectId, deadLetterTopicId).ToString();


        // Construct the subscription with the dead letter policy you expect to have after the update.
        // Here, values in the required fields (name, topic) help identify the subscription.
        var subscription = new Subscription
        {
            SubscriptionName = subscriptionName,
            TopicAsTopicName = topicName,
            DeadLetterPolicy = new DeadLetterPolicy
            {
                DeadLetterTopic = deadLetterTopic,
                MaxDeliveryAttempts = 20,
            }
        };

        var request = new UpdateSubscriptionRequest
        {
            Subscription = subscription,
            // Construct a field mask to indicate which field to update in the subscription.
            UpdateMask = new FieldMask { Paths = { "dead_letter_policy" } }
        };
        var updatedSubscription = subscriber.UpdateSubscription(request);
        return updatedSubscription;
    }
}

Go

在尝试此示例之前,请按照《快速入门:使用客户端库》中的 Go 设置说明进行操作。 如需了解详情,请参阅 Pub/Sub Go API 参考文档

import (
	"context"
	"fmt"
	"io"

	"cloud.google.com/go/pubsub"
)

// updateDeadLetter updates an existing subscription with a dead letter policy.
func updateDeadLetter(w io.Writer, projectID, subID string, fullyQualifiedDeadLetterTopic string) error {
	// projectID := "my-project-id"
	// subID := "my-sub"
	// fullyQualifiedDeadLetterTopic := "projects/my-project/topics/my-dead-letter-topic"
	ctx := context.Background()
	client, err := pubsub.NewClient(ctx, projectID)
	if err != nil {
		return fmt.Errorf("pubsub.NewClient: %w", err)
	}
	defer client.Close()

	updateConfig := pubsub.SubscriptionConfigToUpdate{
		DeadLetterPolicy: &pubsub.DeadLetterPolicy{
			DeadLetterTopic:     fullyQualifiedDeadLetterTopic,
			MaxDeliveryAttempts: 20,
		},
	}

	subConfig, err := client.Subscription(subID).Update(ctx, updateConfig)
	if err != nil {
		return fmt.Errorf("Update: %w", err)
	}
	fmt.Fprintf(w, "Updated subscription config: % v\n", subConfig)
	return nil
}

Java

在尝试此示例之前,请按照《快速入门:使用客户端库》中的 Java 设置说明进行操作。 如需了解详情,请参阅 Pub/Sub Java API 参考文档


import com.google.cloud.pubsub.v1.SubscriptionAdminClient;
import com.google.protobuf.FieldMask;
import com.google.pubsub.v1.DeadLetterPolicy;
import com.google.pubsub.v1.Subscription;
import com.google.pubsub.v1.SubscriptionName;
import com.google.pubsub.v1.TopicName;
import com.google.pubsub.v1.UpdateSubscriptionRequest;
import java.io.IOException;

public class UpdateDeadLetterPolicyExample {
  public static void main(String... args) throws Exception {
    // TODO(developer): Replace these variables before running the sample.
    String projectId = "your-project-id";
    // This is an existing subscription with a dead letter policy.
    String subscriptionId = "your-subscription-id";
    // This is an existing topic that the subscription with dead letter policy is attached to.
    String topicId = "your-topic-id";
    // This is an existing dead letter topic that the subscription with dead letter policy forwards
    // dead letter messages to.
    String deadLetterTopicId = "your-dead-letter-topic-id";

    UpdateDeadLetterPolicyExample.updateDeadLetterPolicyExample(
        projectId, subscriptionId, topicId, deadLetterTopicId);
  }

  public static void updateDeadLetterPolicyExample(
      String projectId, String subscriptionId, String topicId, String deadLetterTopicId)
      throws IOException {
    try (SubscriptionAdminClient subscriptionAdminClient = SubscriptionAdminClient.create()) {

      SubscriptionName subscriptionName = SubscriptionName.of(projectId, subscriptionId);

      System.out.println(
          "Before: "   subscriptionAdminClient.getSubscription(subscriptionName).getAllFields());

      TopicName topicName = TopicName.of(projectId, topicId);
      TopicName deadLetterTopicName = TopicName.of(projectId, deadLetterTopicId);

      // Construct the dead letter policy you expect to have after the update.
      DeadLetterPolicy deadLetterPolicy =
          DeadLetterPolicy.newBuilder()
              .setDeadLetterTopic(deadLetterTopicName.toString())
              .setMaxDeliveryAttempts(20)
              .build();

      // Construct the subscription with the dead letter policy you expect to have
      // after the update. Here, values in the required fields (name, topic) help
      // identify the subscription.
      Subscription subscription =
          Subscription.newBuilder()
              .setName(subscriptionName.toString())
              .setTopic(topicName.toString())
              .setDeadLetterPolicy(deadLetterPolicy)
              .build();

      // Construct a field mask to indicate which field to update in the subscription.
      FieldMask updateMask =
          FieldMask.newBuilder().addPaths("dead_letter_policy.max_delivery_attempts").build();

      UpdateSubscriptionRequest request =
          UpdateSubscriptionRequest.newBuilder()
              .setSubscription(subscription)
              .setUpdateMask(updateMask)
              .build();

      Subscription response = subscriptionAdminClient.updateSubscription(request);

      System.out.println("After: "   response.getAllFields());
      System.out.println(
          "Max delivery attempts is now "
                response.getDeadLetterPolicy().getMaxDeliveryAttempts());
    }
  }
}

Node.js

在尝试此示例之前,请按照《快速入门:使用客户端库》中的 Node.js 设置说明进行操作。如需了解详情,请参阅 Pub/Sub Node.js API 参考文档

/**
 * TODO(developer): Uncomment these variables before running the sample.
 */
// const topicNameOrId = 'YOUR_TOPIC_NAME_OR_ID';
// const subscriptionNameOrId = 'YOUR_SUBSCRIPTION_NAME_OR_ID';

// Imports the Google Cloud client library
const {PubSub} = require('@google-cloud/pubsub');

// Creates a client; cache this for further use
const pubSubClient = new PubSub();

async function updateDeadLetterPolicy(topicNameOrId, subscriptionNameOrId) {
  const metadata = {
    deadLetterPolicy: {
      deadLetterTopic: pubSubClient.topic(topicNameOrId).name,
      maxDeliveryAttempts: 15,
    },
  };

  await pubSubClient
    .topic(topicNameOrId)
    .subscription(subscriptionNameOrId)
    .setMetadata(metadata);

  console.log('Max delivery attempts updated successfully.');
}

PHP

在尝试此示例之前,请按照《快速入门:使用客户端库》中的 PHP 设置说明进行操作。如需了解详情,请参阅 Pub/Sub PHP API 参考文档

use Google\Cloud\PubSub\PubSubClient;

/**
 * Set the dead letter policy on an existing subscription.
 *
 * @param string $projectId  The Google project ID.
 * @param string $topicName  The Pub/Sub topic name.
 * @param string $deadLetterTopicName The Pub/Sub topic to use for dead letter policy.
 */
function dead_letter_update_subscription(
    string $projectId,
    string $topicName,
    string $subscriptionName,
    string $deadLetterTopicName
): void {
    $pubsub = new PubSubClient([
        'projectId' => $projectId,
    ]);

    $topic = $pubsub->topic($topicName);
    $deadLetterTopic = $pubsub->topic($deadLetterTopicName);

    $subscription = $topic->subscription($subscriptionName);
    $subscription->update([
        'deadLetterPolicy' => [
            'deadLetterTopic' => $deadLetterTopic
        ]
    ]);

    printf(
        'Subscription %s updated with dead letter topic %s' . PHP_EOL,
        $subscription->name(),
        $deadLetterTopic->name()
    );
}

Python

在尝试此示例之前,请按照《快速入门:使用客户端库》中的 Python 设置说明进行操作。 如需了解详情,请参阅 Pub/Sub Python API 参考文档

from google.cloud import pubsub_v1
from google.cloud.pubsub_v1.types import DeadLetterPolicy, FieldMask

# TODO(developer)
# project_id = "your-project-id"
# TODO(developer): This is an existing topic that the subscription
# with dead letter policy is attached to.
# topic_id = "your-topic-id"
# TODO(developer): This is an existing subscription with a dead letter policy.
# subscription_id = "your-subscription-id"
# TODO(developer): This is an existing dead letter topic that the subscription
# with dead letter policy will forward dead letter messages to.
# dead_letter_topic_id = "your-dead-letter-topic-id"
# TODO(developer): This is the maximum number of delivery attempts allowed
# for a message before it gets delivered to a dead letter topic.
# max_delivery_attempts = 5

publisher = pubsub_v1.PublisherClient()
subscriber = pubsub_v1.SubscriberClient()

topic_path = publisher.topic_path(project_id, topic_id)
subscription_path = subscriber.subscription_path(project_id, subscription_id)
dead_letter_topic_path = publisher.topic_path(project_id, dead_letter_topic_id)

subscription_before_update = subscriber.get_subscription(
    request={"subscription": subscription_path}
)
print(f"Before the update: {subscription_before_update}.")

# Indicates which fields in the provided subscription to update.
update_mask = FieldMask(paths=["dead_letter_policy"])

# Construct a dead letter policy you expect to have after the update.
dead_letter_policy = DeadLetterPolicy(
    dead_letter_topic=dead_letter_topic_path,
    max_delivery_attempts=max_delivery_attempts,
)

# Construct the subscription with the dead letter policy you expect to have
# after the update. Here, values in the required fields (name, topic) help
# identify the subscription.
subscription = pubsub_v1.types.Subscription(
    name=subscription_path,
    topic=topic_path,
    dead_letter_policy=dead_letter_policy,
)

with subscriber:
    subscription_after_update: gapic_types.Subscription = (
        subscriber.update_subscription(
            request={"subscription": subscription, "update_mask": update_mask}
        )
    )

print(f"After the update: {subscription_after_update}.")

Ruby

在尝试此示例之前,请按照《快速入门:使用客户端库》中的 Ruby 设置说明进行操作。 如需了解详情,请参阅 Pub/Sub Ruby API 参考文档

Ruby

在尝试此示例之前,请按照 Pub/Sub 快速入门:使用客户端库中的 Ruby 设置说明进行操作。 有关详情,请参阅 Pub/Sub Ruby API 参考文档

如需向 Pub/Sub 进行身份验证,请设置应用默认凭据。 如需了解详情,请参阅为本地开发环境设置身份验证

# subscription_id       = "your-subscription-id"
# role                  = "roles/pubsub.publisher"
# service_account_email = "serviceAccount:account_name@project_name.iam.gserviceaccount.com"

pubsub = Google::Cloud::Pubsub.new

subscription = pubsub.subscription subscription_id
subscription.dead_letter_max_delivery_attempts = 20
puts "Max delivery attempts is now #{subscription.dead_letter_max_delivery_attempts}."

向 IAM 角色授予使用死信主题的权限

如需将无法传送的消息转发到死信主题,Pub/Sub 必须具有执行以下操作的权限:

  • 将消息发布到主题。
  • 确认消息,这会将其从订阅中移除。

Pub/Sub 会为每个项目创建并维护一个服务账号:service-project-number@gcp-sa-pubsub.iam.gserviceaccount.com。您可以通过分配 发布商和 订阅者角色

控制台

要授予 Pub/Sub 将消息发布到 死信主题,请完成以下步骤:

  1. 在 Google Cloud 控制台中,进入订阅页面。

    前往订阅页面

  2. 点击包含死信主题的订阅的名称。

  3. 点击死信标签页。

  4. 如需分配发布商角色,请点击授予发布商角色。如果 已成功分配发布商角色,您会看到蓝色对勾标记

  5. 如需分配订阅者角色,请点击授予订阅者角色。如果 已成功分配发布商角色,您会看到蓝色对勾标记

gcloud

如需授予 Pub/Sub 将消息发布到死信主题的权限,请运行以下命令:

PUBSUB_SERVICE_ACCOUNT="service-project-number@gcp-sa-pubsub.iam.gserviceaccount.com"

gcloud pubsub topics add-iam-policy-binding dead-letter-topic-name \
  --member="serviceAccount:$PUBSUB_SERVICE_ACCOUNT"\
  --role="roles/pubsub.publisher"

如需授予 Pub/Sub 确认转发的无法传送的消息的权限,请运行以下命令:

PUBSUB_SERVICE_ACCOUNT="service-project-number@gcp-sa-pubsub.iam.gserviceaccount.com"

gcloud pubsub subscriptions add-iam-policy-binding subscription-id \
  --member="serviceAccount:$PUBSUB_SERVICE_ACCOUNT"\
  --role="roles/pubsub.subscriber"

跟踪传送尝试

为订阅启用死信主题后,每一条消息 具有一个字段,用于指定 尝试发送时间:

  • 从拉取订阅接收的消息包括 delivery_attempt 字段。

  • 从推送订阅收到的消息将包含 deliveryAttempt 字段。

以下示例展示了如何获取传送尝试次数:

C

在尝试此示例之前,请按照《快速入门:使用客户端库》中的 C 设置说明进行操作。如需了解详情,请参阅 Pub/Sub C API 参考文档

namespace pubsub = ::google::cloud::pubsub;
auto sample = [](pubsub::Subscriber subscriber) {
  return subscriber.Subscribe(
      [&](pubsub::Message const& m, pubsub::AckHandler h) {
        std::cout << "Received message " << m << "\n";
        std::cout << "Delivery attempt: " << h.delivery_attempt() << "\n";
        std::move(h).ack();
        PleaseIgnoreThisSimplifiesTestingTheSamples();
      });
};

C#

在尝试此示例之前,请按照 Pub/Sub 快速入门:使用客户端库中的 C# 设置说明进行操作。 如需了解详情,请参阅 Pub/Sub C# API 参考文档

如需向 Pub/Sub 进行身份验证,请设置应用默认凭据。 如需了解详情,请参阅为本地开发环境设置身份验证


using Google.Cloud.PubSub.V1;
using System.Threading;
using System.Threading.Tasks;

public class PullMessagesAsyncWithDeliveryAttemptsSample
{
    public async Task<int> PullMessagesAsyncWithDeliveryAttempts(string projectId, string subscriptionId, bool acknowledge)
    {
        // This is an existing subscription with a dead letter policy.
        SubscriptionName subscriptionName = SubscriptionName.FromProjectSubscription(projectId, subscriptionId);

        SubscriberClient subscriber = await SubscriberClient.CreateAsync(subscriptionName);

        int deliveryAttempt = 0;
        Task startTask = subscriber.StartAsync((PubsubMessage message, CancellationToken cancel) =>
        {
            string text = message.Data.ToStringUtf8();
            System.Console.WriteLine($"Delivery Attempt: {message.GetDeliveryAttempt()}");
            if (message.GetDeliveryAttempt() != null)
            {
                deliveryAttempt = message.GetDeliveryAttempt().Value;
            }
            return Task.FromResult(acknowledge ? SubscriberClient.Reply.Ack : SubscriberClient.Reply.Nack);
        });
        // Run for 7 seconds.
        await Task.Delay(7000);
        await subscriber.StopAsync(CancellationToken.None);
        // Lets make sure that the start task finished successfully after the call to stop.
        await startTask;
        return deliveryAttempt;
    }
}

Go

在尝试此示例之前,请按照 Pub/Sub 快速入门:使用客户端库中的 Go 设置说明进行操作。 有关详情,请参阅 Pub/Sub Go API 参考文档

如需向 Pub/Sub 进行身份验证,请设置应用默认凭据。 如需了解详情,请参阅为本地开发环境设置身份验证

import (
	"context"
	"fmt"
	"io"
	"time"

	"cloud.google.com/go/pubsub"
)

func pullMsgsDeadLetterDeliveryAttempt(w io.Writer, projectID, subID string) error {
	// projectID := "my-project-id"
	// subID := "my-sub"
	ctx := context.Background()
	client, err := pubsub.NewClient(ctx, projectID)
	if err != nil {
		return fmt.Errorf("pubsub.NewClient: %w", err)
	}
	defer client.Close()

	// Receive messages for 10 seconds, which simplifies testing.
	// Comment this out in production, since `Receive` should
	// be used as a long running operation.
	ctx, cancel := context.WithTimeout(ctx, 10*time.Second)
	defer cancel()

	sub := client.Subscription(subID)
	err = sub.Receive(ctx, func(_ context.Context, msg *pubsub.Message) {
		// When dead lettering is enabled, the delivery attempt field is a pointer to the
		// the number of times the service has attempted to delivery a message.
		// Otherwise, the field is nil.
		if msg.DeliveryAttempt != nil {
			fmt.Fprintf(w, "message: %s, delivery attempts: %d", msg.Data, *msg.DeliveryAttempt)
		}
		msg.Ack()
	})
	if err != nil {
		return fmt.Errorf("got error in Receive: %w", err)
	}
	return nil
}

Java

在尝试此示例之前,请按照Java Pub/Sub 快速入门: 客户端库。 有关详情,请参阅 Pub/Sub Java API 参考文档

如需向 Pub/Sub 进行身份验证,请设置应用默认凭据。 如需了解详情,请参阅为本地开发环境设置身份验证


import com.google.cloud.pubsub.v1.AckReplyConsumer;
import com.google.cloud.pubsub.v1.MessageReceiver;
import com.google.cloud.pubsub.v1.Subscriber;
import com.google.pubsub.v1.ProjectSubscriptionName;
import com.google.pubsub.v1.PubsubMessage;
import java.util.concurrent.TimeUnit;
import java.util.concurrent.TimeoutException;

public class ReceiveMessagesWithDeliveryAttemptsExample {

  public static void main(String... args) throws Exception {
    // TODO(developer): Replace these variables before running the sample.
    String projectId = "your-project-id";
    // This is an existing subscription with a dead letter policy.
    String subscriptionId = "your-subscription-id";

    ReceiveMessagesWithDeliveryAttemptsExample.receiveMessagesWithDeliveryAttemptsExample(
        projectId, subscriptionId);
  }

  public static void receiveMessagesWithDeliveryAttemptsExample(
      String projectId, String subscriptionId) {

    ProjectSubscriptionName subscriptionName =
        ProjectSubscriptionName.of(projectId, subscriptionId);

    // Instantiate an asynchronous message receiver.
    MessageReceiver receiver =
        new MessageReceiver() {
          @Override
          public void receiveMessage(PubsubMessage message, AckReplyConsumer consumer) {
            // Handle incoming message, then ack the received message.
            System.out.println("Id: "   message.getMessageId());
            System.out.println("Data: "   message.getData().toStringUtf8());
            System.out.println("Delivery Attempt: "   Subscriber.getDeliveryAttempt(message));
            consumer.ack();
          }
        };

    Subscriber subscriber = null;
    try {
      subscriber = Subscriber.newBuilder(subscriptionName, receiver).build();
      // Start the subscriber.
      subscriber.startAsync().awaitRunning();
      System.out.printf("Listening for messages on %s:\n", subscriptionName.toString());
      // Allow the subscriber to run for 30s unless an unrecoverable error occurs.
      subscriber.awaitTerminated(30, TimeUnit.SECONDS);
    } catch (TimeoutException timeoutException) {
      // Shut down the subscriber after 30s. Stop receiving messages.
      subscriber.stopAsync();
    }
  }
}

Node.js

在尝试此示例之前,请按照 Pub/Sub 快速入门:使用客户端库中的 Node.js 设置说明进行操作。 有关详情,请参阅 Pub/Sub Node.js API 参考文档

如需向 Pub/Sub 进行身份验证,请设置应用默认凭据。 如需了解详情,请参阅为本地开发环境设置身份验证

/**
 * TODO(developer): Uncomment these variables before running the sample.
 */
// const projectId = 'YOUR_PROJECT_ID';
// const subscriptionNameOrId = 'YOUR_SUBSCRIPTION_NAME_OR_ID';

// Imports the Google Cloud client library. v1 is for the lower level
// proto access.
const {v1} = require('@google-cloud/pubsub');

// Creates a client; cache this for further use.
const subClient = new v1.SubscriberClient();

async function synchronousPullWithDeliveryAttempts(
  projectId,
  subscriptionNameOrId
) {
  // The low level API client requires a name only.
  const formattedSubscription =
    subscriptionNameOrId.indexOf('/') >= 0
      ? subscriptionNameOrId
      : subClient.subscriptionPath(projectId, subscriptionNameOrId);

  // The maximum number of messages returned for this request.
  // Pub/Sub may return fewer than the number specified.
  const request = {
    subscription: formattedSubscription,
    maxMessages: 10,
  };

  // The subscriber pulls a specified number of messages.
  const [response] = await subClient.pull(request);

  // Process the messages.
  const ackIds = [];
  for (const message of response.receivedMessages || []) {
    console.log(`Received message: ${message.message.data}`);
    console.log(`Delivery Attempt: ${message.deliveryAttempt}`);
    if (message.ackId) {
      ackIds.push(message.ackId);
    }
  }

  // Acknowledge all of the messages. You could also acknowledge
  // these individually, but this is more efficient.
  const ackRequest = {
    subscription: formattedSubscription,
    ackIds: ackIds,
  };
  await subClient.acknowledge(ackRequest);

  console.log('Done.');
}

PHP

在尝试此示例之前,请按照 Pub/Sub 快速入门:使用客户端库中的 PHP 设置说明进行操作。 有关详情,请参阅 Pub/Sub PHP API 参考文档

如需向 Pub/Sub 进行身份验证,请设置应用默认凭据。 如需了解详情,请参阅为本地开发环境设置身份验证

use Google\Cloud\PubSub\Message;
use Google\Cloud\PubSub\PubSubClient;

/**
 * Get the delivery attempt from a pulled message.
 *
 * @param string $projectId  The Google project ID.
 * @param string $topicName  The Pub/Sub topic name.
 * @param string $subscriptionName  The Pub/Sub subscription name.
 * @param string $message The contents of a pubsub message data field.
 */
function dead_letter_delivery_attempt($projectId, $topicName, $subscriptionName, $message)
{
    $pubsub = new PubSubClient([
        'projectId' => $projectId,
    ]);

    $topic = $pubsub->topic($topicName);

    // publish test message
    $topic->publish(new Message([
        'data' => $message
    ]));

    $subscription = $topic->subscription($subscriptionName);
    $messages = $subscription->pull();

    foreach ($messages as $message) {
        printf('Received message %s' . PHP_EOL, $message->data());
        printf('Delivery attempt %d' . PHP_EOL, $message->deliveryAttempt());
    }
    print('Done' . PHP_EOL);
}

Python

在尝试此示例之前,请按照 Pub/Sub 快速入门:使用客户端库中的 Python 设置说明进行操作。 如需了解详情,请参阅 Pub/Sub Python API 参考文档

如需向 Pub/Sub 进行身份验证,请设置应用默认凭据。 如需了解详情,请参阅为本地开发环境设置身份验证

from concurrent.futures import TimeoutError
from google.cloud import pubsub_v1

# TODO(developer)
# project_id = "your-project-id"
# subscription_id = "your-subscription-id"

subscriber = pubsub_v1.SubscriberClient()
subscription_path = subscriber.subscription_path(project_id, subscription_id)

def callback(message: pubsub_v1.subscriber.message.Message) -> None:
    print(f"Received {message}.")
    print(f"With delivery attempts: {message.delivery_attempt}.")
    message.ack()

streaming_pull_future = subscriber.subscribe(subscription_path, callback=callback)
print(f"Listening for messages on {subscription_path}..\n")

# Wrap subscriber in a 'with' block to automatically call close() when done.
with subscriber:
    # When `timeout` is not set, result() will block indefinitely,
    # unless an exception is encountered first.
    try:
        streaming_pull_future.result(timeout=timeout)
    except TimeoutError:
        streaming_pull_future.cancel()  # Trigger the shutdown.
        streaming_pull_future.result()  # Block until the shutdown is complete.

Ruby

在尝试此示例之前,请按照Ruby Pub/Sub 快速入门: 客户端库。 有关详情,请参阅 Pub/Sub Ruby API 参考文档

如需向 Pub/Sub 进行身份验证,请设置应用默认凭据。 如需了解详情,请参阅为本地开发环境设置身份验证

# subscription_id = "your-subscription-id"

pubsub = Google::Cloud::Pubsub.new

subscription = pubsub.subscription subscription_id
subscription.pull(immediate: false).each do |message|
  puts "Received message: #{message.data}"
  puts "Delivery Attempt: #{message.delivery_attempt}"
  message.acknowledge!
end

当 Pub/Sub 将无法传送的消息转发到死信主题时,会向消息添加以下属性

  • CloudPubSubDeadLetterSourceDeliveryCount:传送尝试次数 来源订阅
  • CloudPubSubDeadLetterSourceSubscription:来源订阅的名称。
  • CloudPubSubDeadLetterSourceSubscriptionProject:需要修改配置的项目的名称 包含源订阅。
  • CloudPubSubDeadLetterSourceTopicPublishTime:消息最初发布的时间戳。
  • CloudPubSubDeadLetterSourceDeliveryErrorMessage:邮件无法递送到原始目的地的具体原因。此属性仅适用于导出订阅

监控转发的消息

转发无法送达的消息后,Pub/Sub 服务会从订阅中移除消息。您可以使用 Cloud Monitoring。

如果您将订阅附加到死信主题,则这些消息会使用附加订阅的到期政策,而非具有死信主题属性的订阅的有效期。

subscription/dead_letter_message_count 指标用于记录 Pub/Sub 从订阅转发的无法传送的消息数量。

如需了解详情,请参阅监控转发的无法传送的消息

移除死信主题

如需停止转发无法传送的消息,请从订阅中移除死信主题。

您可以使用 Google Cloud 控制台、Google Cloud CLI 或 Pub/Sub API。

控制台

如需从订阅中移除死信主题,请完成以下步骤:

  1. 在 Google Cloud 控制台中,进入订阅页面。

    前往订阅页面

  2. 在订阅列表中,点击订阅旁边的 进行更新。

  3. 从上下文菜单中选择修改

    突出显示“修改”选项的上下文菜单。

  4. 死信部分,清除启用死信

  5. 点击更新

gcloud

如需从订阅中移除死信主题,请使用 gcloud pubsub subscriptions update 命令和 --clear-dead-letter-policy 标志:

gcloud pubsub subscriptions update subscription-id \
  --clear-dead-letter-policy

C

在尝试此示例之前,请按照《快速入门:使用客户端库》中的 C 设置说明进行操作。如需了解详情,请参阅 Pub/Sub C API 参考文档

namespace pubsub_admin = ::google::cloud::pubsub_admin;
namespace pubsub = ::google::cloud::pubsub;
[](pubsub_admin::SubscriptionAdminClient client,
   std::string const& project_id, std::string const& subscription_id) {
  google::pubsub::v1::UpdateSubscriptionRequest request;
  request.mutable_subscription()->set_name(
      pubsub::Subscription(project_id, subscription_id).FullName());
  request.mutable_subscription()->clear_dead_letter_policy();
  *request.mutable_update_mask()->add_paths() = "dead_letter_policy";
  auto sub = client.UpdateSubscription(request);
  if (!sub) throw std::move(sub).status();

  std::cout << "The subscription has been updated to: " << sub->DebugString()
            << "\n";
}

C#

在尝试此示例之前,请按照《快速入门:使用客户端库》中的 C# 设置说明进行操作。 如需了解详情,请参阅 Pub/Sub C# API 参考文档


using Google.Cloud.PubSub.V1;
using Google.Protobuf.WellKnownTypes;

public class RemoveDeadLetterPolicySample
{
    public Subscription RemoveDeadLetterPolicy(string projectId, string topicId, string subscriptionId)
    {
        SubscriberServiceApiClient subscriber = SubscriberServiceApiClient.Create();
        // This is an existing topic that the subscription with dead letter policy is attached to.
        TopicName topicName = TopicName.FromProjectTopic(projectId, topicId);
        // This is an existing subscription with dead letter policy.
        SubscriptionName subscriptionName = SubscriptionName.FromProjectSubscription(projectId, subscriptionId);

        var subscription = new Subscription()
        {
            SubscriptionName = subscriptionName,
            TopicAsTopicName = topicName,
            DeadLetterPolicy = null
        };

        var request = new UpdateSubscriptionRequest
        {
            Subscription = subscription,
            UpdateMask = new FieldMask { Paths = { "dead_letter_policy" } }
        };
        var updatedSubscription = subscriber.UpdateSubscription(request);
        return updatedSubscription;
    }
}

Go

在尝试此示例之前,请按照《快速入门:使用客户端库》中的 Go 设置说明进行操作。 如需了解详情,请参阅 Pub/Sub Go API 参考文档

import (
	"context"
	"fmt"
	"io"

	"cloud.google.com/go/pubsub"
)

// removeDeadLetterTopic removes the dead letter policy from a subscription.
func removeDeadLetterTopic(w io.Writer, projectID, subID string) error {
	// projectID := "my-project-id"
	// subID := "my-sub"
	ctx := context.Background()
	client, err := pubsub.NewClient(ctx, projectID)
	if err != nil {
		return fmt.Errorf("pubsub.NewClient: %w", err)
	}
	defer client.Close()

	subConfig, err := client.Subscription(subID).Update(ctx, pubsub.SubscriptionConfigToUpdate{
		DeadLetterPolicy: &pubsub.DeadLetterPolicy{},
	})
	if err != nil {
		return fmt.Errorf("Update: %w", err)
	}
	fmt.Fprintf(w, "Updated subscription config: % v\n", subConfig)
	return nil
}

Java

在尝试此示例之前,请按照《快速入门:使用客户端库》中的 Java 设置说明进行操作。 如需了解详情,请参阅 Pub/Sub Java API 参考文档


import com.google.cloud.pubsub.v1.SubscriptionAdminClient;
import com.google.protobuf.FieldMask;
import com.google.pubsub.v1.ProjectSubscriptionName;
import com.google.pubsub.v1.Subscription;
import com.google.pubsub.v1.TopicName;
import com.google.pubsub.v1.UpdateSubscriptionRequest;

public class RemoveDeadLetterPolicyExample {

  public static void main(String... args) throws Exception {
    // TODO(developer): Replace these variables before running the sample.
    String projectId = "your-project-id";
    // This is an existing subscription with dead letter policy.
    String subscriptionId = "your-subscription-id";
    // This is an existing topic that the subscription with dead letter policy is attached to.
    String topicId = "your-topic-id";

    RemoveDeadLetterPolicyExample.removeDeadLetterPolicyExample(projectId, subscriptionId, topicId);
  }

  public static void removeDeadLetterPolicyExample(
      String projectId, String subscriptionId, String topicId) throws Exception {
    try (SubscriptionAdminClient subscriptionAdminClient = SubscriptionAdminClient.create()) {

      ProjectSubscriptionName subscriptionName =
          ProjectSubscriptionName.of(projectId, subscriptionId);
      TopicName topicName = TopicName.of(projectId, topicId);

      // Construct the subscription you expect to have after the request. Here,
      // values in the required fields (name, topic) help identify the subscription.
      // No dead letter policy is supplied.
      Subscription expectedSubscription =
          Subscription.newBuilder()
              .setName(subscriptionName.toString())
              .setTopic(topicName.toString())
              .build();

      // Construct a field mask to indicate which field to update in the subscription.
      FieldMask updateMask = FieldMask.newBuilder().addPaths("dead_letter_policy").build();

      UpdateSubscriptionRequest request =
          UpdateSubscriptionRequest.newBuilder()
              .setSubscription(expectedSubscription)
              .setUpdateMask(updateMask)
              .build();

      Subscription response = subscriptionAdminClient.updateSubscription(request);

      // You should see an empty dead letter topic field inside the dead letter policy.
      System.out.println("After: "   response.getAllFields());
    }
  }
}

Node.js

在尝试此示例之前,请按照《快速入门:使用客户端库》中的 Node.js 设置说明进行操作。如需了解详情,请参阅 Pub/Sub Node.js API 参考文档

/**
 * TODO(developer): Uncomment these variables before running the sample.
 */
// const topicNameOrId = 'YOUR_TOPIC_NAME_OR_ID';
// const subscriptionNameOrId = 'YOUR_SUBSCRIPTION_NAME_OR_ID';

// Imports the Google Cloud client library
const {PubSub} = require('@google-cloud/pubsub');

// Creates a client; cache this for further use
const pubSubClient = new PubSub();

async function removeDeadLetterPolicy(topicNameOrId, subscriptionNameOrId) {
  const metadata = {
    deadLetterPolicy: null,
  };

  await pubSubClient
    .topic(topicNameOrId)
    .subscription(subscriptionNameOrId)
    .setMetadata(metadata);

  console.log(
    `Removed dead letter topic from ${subscriptionNameOrId} subscription.`
  );
}

PHP

在尝试此示例之前,请按照《快速入门:使用客户端库》中的 PHP 设置说明进行操作。如需了解详情,请参阅 Pub/Sub PHP API 参考文档

use Google\Cloud\PubSub\PubSubClient;

/**
 * Remove dead letter policy from an existing subscription.
 *
 * @param string $projectId  The Google project ID.
 * @param string $topicName  The Pub/Sub topic name.
 * @param string $subscriptionName  The Pub/Sub subscription name.
 */
function dead_letter_remove($projectId, $topicName, $subscriptionName)
{
    $pubsub = new PubSubClient([
        'projectId' => $projectId,
    ]);

    $topic = $pubsub->topic($topicName);

    $subscription = $topic->subscription($subscriptionName);

    // Provide deadLetterPolicy in the update mask, but omit from update fields to unset.
    $subscription->update([], [
        'updateMask' => [
            'deadLetterPolicy'
        ]
    ]);

    printf(
        'Removed dead letter topic from subscription %s' . PHP_EOL,
        $subscription->name()
    );
}

Python

在尝试此示例之前,请按照《快速入门:使用客户端库》中的 Python 设置说明进行操作。 如需了解详情,请参阅 Pub/Sub Python API 参考文档

from google.cloud import pubsub_v1
from google.cloud.pubsub_v1.types import FieldMask

# TODO(developer)
# project_id = "your-project-id"
# TODO(developer): This is an existing topic that the subscription
# with dead letter policy is attached to.
# topic_id = "your-topic-id"
# TODO(developer): This is an existing subscription with a dead letter policy.
# subscription_id = "your-subscription-id"

publisher = pubsub_v1.PublisherClient()
subscriber = pubsub_v1.SubscriberClient()
topic_path = publisher.topic_path(project_id, topic_id)
subscription_path = subscriber.subscription_path(project_id, subscription_id)

subscription_before_update = subscriber.get_subscription(
    request={"subscription": subscription_path}
)
print(f"Before removing the policy: {subscription_before_update}.")

# Indicates which fields in the provided subscription to update.
update_mask = FieldMask(paths=["dead_letter_policy"])

# Construct the subscription (without any dead letter policy) that you
# expect to have after the update.
subscription = pubsub_v1.types.Subscription(
    name=subscription_path, topic=topic_path
)

with subscriber:
    subscription_after_update: gapic_types.Subscription = (
        subscriber.update_subscription(
            request={"subscription": subscription, "update_mask": update_mask}
        )
    )

print(f"After removing the policy: {subscription_after_update}.")

Ruby

在尝试此示例之前,请按照《快速入门:使用客户端库》中的 Ruby 设置说明进行操作。 如需了解详情,请参阅 Pub/Sub Ruby API 参考文档

Ruby

在尝试此示例之前,请按照Ruby Pub/Sub 快速入门: 客户端库。 如需了解详情,请参阅 Pub/Sub Ruby API 参考文档

如需向 Pub/Sub 进行身份验证,请设置应用默认凭据。 如需了解详情,请参阅为本地开发环境设置身份验证

# subscription_id = "your-subscription-id"

pubsub = Google::Cloud::Pubsub.new

subscription = pubsub.subscription subscription_id
subscription.remove_dead_letter_policy
puts "Removed dead letter topic from #{subscription_id} subscription."

价格

Pub/Sub 服务转发无法传送的消息时,您需要支付以下费用:

  • 向与包含死信主题的项目相关联的结算账号计入的发布费用。
  • 向结算账号收取的出站邮件的订阅费用 与包含死信主题的订阅的项目相关联 属性。

如果您设置了订阅的死信主题属性,但 消息存储位置政策 死信主题主题不允许包含相应订阅的区域; 还需要支付出站消息的发布费用。

出站消息的发布费用将计入包含 死信主题要了解详情,请参阅价格

后续步骤