Create Data Guard's standby database
After the primary database has been prepared for Data Guard, it's ready to be duplicated to the standby site. The following guide uses active duplication to create a consistent copy of the database.
As a reminder, the following examples are used throughout this guide:
Database unique name | Server hostnames | RAC instance names | Role |
---|---|---|---|
DBDG_SITE1 | site1db1, site1db2 | DBDG_SITE11, DBDG_SITE12 | Primary |
DBDG_SITE2 | site2db1, site2db2 | DBDG_SITE21, DBDG_SITE22 | Standby |
The Bare Metal Solution servers running Oracle in this guide are configured with the following environment variables:
Environment variable name | Value |
---|---|
ORACLE_BASE | /apps/oracle/oracle_base |
ORACLE_HOME | /apps/oracle/19.0.0/db_home1 |
You might need to modify the environment variable paths depending on your setup.
Set up the standby database
Configure the database connectivity
Log in to each Bare Metal Solution server in the standby location and modify
the $ORACLE_HOME/network/admin/tsnames.ora
file to update the net service
configuration:
DBDG_SITE2 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = DBDG_SITE2_SCAN_HOSTNAME)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = DBDG_SITE2) (UR=A)
)
)
DBDG_SITE1 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = DBDG_SITE1_SCAN_HOSTNAME)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = DBDG_SITE1)
)
)
Configure a temporary listener
To avoid restarting the listener used for other database connections, database duplication is performed using a temporary listener. This example uses port 1523, but you can use any port that is open for communication between the clusters. You delete this temporary listener after database duplication.
Log in to the first Bare Metal Solution server in the standby location to be used during the database duplication process. Modify the
$ORACLE_HOME/network/admin/listener.ora
file to update the net service configuration:LISTENER_DBDG_SITE2 = (DESCRIPTION_LIST = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = site1db1)(PORT = 1523)) ) ) SID_LIST_LISTENER_DBDG_SITE2 = (SID_LIST = (SID_DESC = (GLOBAL_DBNAME = DBDG_SITE2_DGMGRL) (ORACLE_HOME = ORACLE_HOME) (SID_NAME = DBDG_SITE21) ) ) ADR_BASE_LISTENER = /apps/oracle/oracle_base
Start the temporary listener:
lsnrctl start LISTENER_DBDG_SITE2
Prepare the standby database
Each database instance requires a directory to store audit logs. Create the audit file directory on each Bare Metal Solution server in the standby database location:
mkdir -p /apps/oracle/oracle_base/admin/DBDG_SITE2/adump
Modify the
$ORACLE_HOME/dbs/initDBDG_SITE21.ora
file that was copied to the standby database server earlier:- Set the
db_unique_name
to the new standby database name. - Modify any instance-specific parameters to reflect the instance names for
the standby database. Some examples are:
instance_number
thread
undo_tablespace
- Set the
audit_file_dest
parameter to use the directory created in the previous step. - If the ASM diskgroups in each location use different names, modify the
db_file_name_convert
andlog_file_name_convert
parameters to match the new file locations. - Comment out the
control_files
parameter.
The following example shows an updated database parameter file with modifications using the examples provided in this guide. Note that your parameter file will contain additional parameters that are specific to your database setup. Only the parameters that require modification for the standby are shown:
*.db_unique_name='DBDG_SITE2' DBDG_SITE21.instance_number=1 DBDG_SITE22.instance_number=2 DBDG_SITE21.thread=1 DBDG_SITE22.thread=2 DBDG_SITE21.undo_tablespace='UNDOTBS1' DBDG_SITE22.undo_tablespace='UNDOTBS2' *.audit_file_dest='/apps/oracle/oracle_base/admin/DBDG_SITE2/adump' #*.control_files=' DATA/DBDG_SITE1/CONTROLFILE/current.258.1091317089',' RECO/DBDG_SITE1/CONTROLFILE/current.257.1091317089'
- Set the
In the
/etc/oratab
file, add an entry so theoraenv
command can set environment variables for the standby database:DBDG_SITE21:ORACLE_HOME:N
Create the standby database
Set the
ORACLE_SID
environment variable so you can connect to the standby database:source oraenv <<< "DBDG_SITE21"
You should receive the response
The Oracle base has been set to /apps/oracle/oracle_base
.Before duplicating the primary database, you must manually start the standby instance on one node. Log in to the first Bare Metal Solution server in the standby location, start SQL*Plus, then startup the standby database in
nomount mode
by using thepfile
:sqlplus / as sysdba
STARTUP NOMOUNT PFILE='/apps/oracle/19.0.0/db_home1/dbs/initDBDG_SITE21.ora';
If successful, you should receive a response similar to the following example:
ORACLE instance started. Total System Global Area 1.2885E 10 bytes Fixed Size 15988824 bytes Variable Size 1845493760 bytes Database Buffers 1.1006E 10 bytes Redo Buffers 17563648 bytes
Exit SQL*Plus after starting the instance:
EXIT;
Verify connectivity to the standby database service. From each Bare Metal Solution server in the primary database location, attempt to connect to the standby instance by using SQL*Plus. Enter the SYS remote login password manually to successfully connect to the instance.
sqlplus sys@DBDG_SITE2_FOR_DUPLICATION as sysdba
If successful, you should receive a standard SQL*Plus prompt, where you can check the instance parameters:
SHOW PARAMETER DB_UNIQUE_NAME;
You should receive a response similar to the following:
NAME TYPE VALUE ---------------- ----------- ------------------------------ db_unique_name string DBDG_SITE2
Exit SQL*Plus after checking the
DB_UNIQUE_NAME
parameter:EXIT;
Connect to Recovery Manager, then run the
duplicate
command to duplicate the standby from the active primary database:rman TARGET sys@DBDG_SITE1 AUXILIARY sys@DBDG_SITE2_FOR_DUPLICATION
DUPLICATE TARGET DATABASE FOR STANDBY FROM ACTIVE DATABASE NOFILENAMECHECK;
If successful, after processing you should receive a message similar to the following example:
Finished Duplicate Db at ...
Exit Recovery Manager:
EXIT;
Finalize the standby database creation
During database duplication, ASM creates new control files for the standby database. Connect to the new standby instance and get the new control file name(s). The following example shows two control files stored in the
DATA
andRECO
diskgroups:sqlplus / as sysdba
SET LINESIZE 140 COLUMN NAME FORMAT a15 COLUMN VALUE FORMAT a125 SELECT NAME, VALUE FROM V$PARAMETER WHERE NAME='control_files';
The control file name(s) are shown in the "Value" field:
NAME VALUE --------------- ---------------------------------------------------------------------------------------------------- control_files DATA/DBDG_SITE2/CONTROLFILE/current.258.1091317089, RECO/DBDG_SITE2/CONTROLFILE/current.257.1091317089
Record the control file names from the previous step, and replace any entries for the
control_files
parameter in$ORACLE_HOME/dbs/initDBDG_SITE21.ora
with the new values. If there are multiple control files, encapsulate each in single quotes, separated by a comma:*.control_files=' DATA/DBDG_SITE2/CONTROLFILE/current.258.1091317089',' RECO/DBDG_SITE2/CONTROLFILE/current.257.1091317089'
Connect to the standby database with SQL*Plus and create a new
spfile
from the modifiedpfile
:sqlplus / as sysdba
CREATE SPFILE=' DATA/DBDG_SITE2/spfileDBDG_SITE2' FROM PFILE='/apps/oracle/19.0.0/db_home1/dbs/initDBDG_SITE21.ora';
Copy the password file to the ASM diskgroup by using the
asmcmd
command:asmcmd cp /apps/oracle/19.0.0/db_home1/dbs/orapwDBDG_SITE21.ora DATA/DBDG_SITE2/orapwDBDG_SITE2
Shut down the standby database instance and delete the temporary
pfile
and password file:sqplus / as sysdba
SHUTDOWN IMMEDIATE; EXIT;
rm $ORACLE_HOME/dbs/orapwDBDG_SITE21.ora $ORACLE_HOME/dbs/initDBDG_SITE2.ora
Stop the temporary listener used for database duplication on the first Bare Metal Solution server in the standby database location:
lsnrctl stop LISTENER_DBDG_SITE2
Remove the temporary entries in the
$ORACLE_HOME/network/admin/listener.ora
file on the first Bare Metal Solution server in the standby database location.Add the new standby database and instances to the cluster registry by using the
srvctl
command:srvctl add database \ -db DBDG_SITE2 \ -oraclehome /apps/oracle/19.0.0/db_home1 \ -spfile DATA/DBDG_SITE2/spfileDBDG_SITE2 \ -pwfile DATA/DBDG_SITE2/orapwDBDG_SITE2 \ -role PHYSICAL_STANDBY \ -startoption MOUNT srvctl add instance \ -db DBDG_SITE2 \ -instance DBDG_SITE21 \ -node site2db1 srvctl add instance \ -db DBDG_SITE2 \ -instance DBDG_SITE22 \ -node site2db2
Start the standby database by using the
srvctl
command:srvctl start database -db DBDG_SITE2
Next steps
Next, configure and enable the Data Guard broker.