Vagrant Box Templates

Vagrant Box Templates

Vagrant Box Templates

Purpose

Spin up different OS types using Vagrant and learn Ansible at the same time if desired. Some distros also include Desktop versions.

Requirements

Software

Alpine box requirements

`vagrant-alpine` plugin

NOTE: require the vagrant-alpine plugin to be installed

vagrant plugin install vagrant-alpine

`/vagrant` synced_folder

NOTE: NFS is used for the /vagrant synced_folder. This means you will be prompted for sudo password when spinning up a box. This can be changed to not prompt by references here

Setting up `sudoers`

`OS X`

To setup sudoers for OSX add the following using visudo

Cmnd_Alias VAGRANT_EXPORTS_ADD = /usr/bin/tee -a /etc/exports
Cmnd_Alias VAGRANT_NFSD = /sbin/nfsd restart
Cmnd_Alias VAGRANT_EXPORTS_REMOVE = /usr/bin/sed -E -e /*/ d -ibak /etc/exports
�min ALL=(root) NOPASSWD: VAGRANT_EXPORTS_ADD, VAGRANT_NFSD, VAGRANT_EXPORTS_REMOVE

`Ubuntu`

To setup sudoers for Ubuntu add the following using visudo

Cmnd_Alias VAGRANT_EXPORTS_CHOWN = /bin/chown 0\:0 /tmp/*
Cmnd_Alias VAGRANT_EXPORTS_MV = /bin/mv -f /tmp/* /etc/exports
Cmnd_Alias VAGRANT_NFSD_CHECK = /etc/init.d/nfs-kernel-server status
Cmnd_Alias VAGRANT_NFSD_START = /etc/init.d/nfs-kernel-server start
Cmnd_Alias VAGRANT_NFSD_APPLY = /usr/sbin/exportfs -ar
%sudo ALL=(root) NOPASSWD: VAGRANT_EXPORTS_CHOWN, VAGRANT_EXPORTS_MV, VAGRANT_NFSD_CHECK, VAGRANT_NFSD_START, VAGRANT_NFSD_APPLY

`Fedora`

To setup sudoers for Fedora add the following using visudo

Note: Given your user belongs to the vagrant group

Cmnd_Alias VAGRANT_EXPORTS_CHOWN = /bin/chown 0\:0 /tmp/*
Cmnd_Alias VAGRANT_EXPORTS_MV = /bin/mv -f /tmp/* /etc/exports
Cmnd_Alias VAGRANT_NFSD_CHECK = /usr/bin/systemctl status --no-pager nfs-server.service
Cmnd_Alias VAGRANT_NFSD_START = /usr/bin/systemctl start nfs-server.service
Cmnd_Alias VAGRANT_NFSD_APPLY = /usr/sbin/exportfs -ar
%vagrant ALL=(root) NOPASSWD: VAGRANT_EXPORTS_CHOWN, VAGRANT_EXPORTS_MV, VAGRANT_NFSD_CHECK, VAGRANT_NFSD_START, VAGRANT_NFSD_APPLY

Included Box Distros

NOTE: This list may not be completely up to date.

Below are the included distros along with their respective releases that are available in this repo.

Distro	Releases
`Alpine`	`3.7`, `3.8`, `3.9`, `3.10`
`Arch`	`N/A`
`CentOS`	`5`, `6`, `7`, `8`
`Debian`	`7`, `8`, `9`, `10`
`Fedora`	`21`, `22`, `23`, `24`, `25`, `26`, `27`, `28`, `29`, `30`
`FreeNAS`	`11.2`
`LinuxMint`	`18`, `19`
`openSUSE`	`15.0`, `15.1`, `42.2`, `42.3`
`Oracle Linux`	`7`
`Scientific-Linux`	`7`
`Ubuntu`	`12.04`, `14.04`, `15.04`, `15.10`, `16.04`, `16.10`, `17.04`, `17.10`, `18.04`, `18.10`, `19.04`, `19.10`
`VyOS`	`1.1.8`
`Windows`	`10`, `2008 R2`, `2012 R2`, `2016`, `2019`

Useful information

Building Vagrant Boxes

My process for building and keeping the majority of these boxes up to date is by using Packer. I also maintain a Packer Templates repository which contains all of the relevant information on how build and test new boxes.

Vagrantfile

A single Vagrantfile is used for all distros to use. This helps keeping changes to a minimum (Very seldom needed). The reason behind this is that I have spent close to two years trying to come up with a single Vagrantfile that would fit most any scenario that I have a use case for during development. Many of these scenarios involve multinode clustering, routing, loadbalancing, ZFS, GlusterFS, Docker Swarm, Kubernetes, ELK Stack, and so on. Not to say that a specific use case may not present itself that would require a change to the Vagrantfile but those are far in between.

Vagrantfile

File structure

Most files are symlinks from each distro folder into the repo root to keep a consistent and easy method of changing things around. Feel free to change as needed.

Working on different projects

One trick that I use daily with these templates is to working on many different projects and not ever need to change out of my single folder. What I mean by this is that I can stay within a single folder and easily switch between projects by using GIT branches for each project.

Create development environment

Clone this repo

cd ~
mkdir -p projects/vagrant
cd projects/vagrant
git clone https://github.com/mrlesmithjr/vagrant-box-templates

Remove the origin remote

cd vagrant-box-templates
git remote remove origin

Add this repo as the upstream remote

git remote add upstream https://github.com/mrlesmithjr/vagrant-box-templates.git
git fetch upstream master

At this point you now are on your local master branch with a remote called upstream.

Create project development environment

I never do any work in master to keep this nice and untouched. So when I need to work on a project I simply do the following:

git checkout master
git checkout -b projectname

I then define my environment, Ansible groups, Ansible roles, and Ansible playbooks for the specific project. I then do all of my testing and development, and when I am finished, I simply add all of the new/changed files and commit them only locally. Then the next time I need a new environment I follow this same process by going back to master and checking out another branch for developing in.

NOTE: You could definitely add another GIT remote and keep your projects (branches) synced.

Example of what my current environment looks like after cleaning it up a bit not long ago.

  dev/alpine-docker
  dev/apache2
  dev/bird
  dev/bro-ids
  dev/cacti
  dev/ceph
  dev/config-interfaces
  dev/dnsmasq
  dev/docker
  dev/dumb-init
  dev/elasticsearch
  dev/eve-ng
  dev/fluentd
  dev/gerrit
  dev/graylog
  dev/influxdb
  dev/k8s
  dev/kea-dhcp
  dev/kvm
  dev/landscape
  dev/letsencrypt
  dev/lvm
  dev/monit
  dev/motd
  dev/mysql
  dev/netdata
  dev/pdns
  dev/postgres
  dev/prometheus-grafana-docker
  dev/rabbitmq
  dev/sensu
  dev/spinnaker
  dev/squid-haproxy-keepalived
  dev/stackstorm
  dev/syslog-ng
  dev/testing-roles
  dev/tripwire
  dev/unbound
  dev/vault-consul
  dev/vault-consul-docker
  dev/vault-consul-docker-monitoring
  dev/zabbix
  issue-#9
* master
  play/linuxmint
  play/zesty-desktop
  test/uname
  testing/consul

Keeping development environment up to date with this repo

In order to keep my development environment synced up with any changes from this repo all I have to do is:

git checkout master
git fetch upstream master
git pull --rebase upstream master

And now if I want to pull any important changes into any existing projects I simply have to only do:

git checkout projectname
git rebase master

Using Docker containers

You may also be interested in using Docker containers to perform similar testing scenarios as we are doing here. We can still use Vagrant and Ansible as we do here but we replace Virtualbox with Docker as our provider. This definitely keeps things slimmed down a bit but does limit some of our testing scenarios. However, if you are interested in this you can also checkout my vagrant-container-templates repo for more info on that.

Usage

Getting started

Clone repo

git clone https://github.com/mrlesmithjr/vagrant-box-templates
cd vagrant-box-templates

Choose distro

Find the OS of your choice and spin up a node or more.

Customizing environment

Each distro folder contains a environment.yml file which you can change the number of nodes to spin up if desired.

For examples of possible settings checkout the following test environment: Test/dummy/server/environment.yml

Nested Virtualization

You can enable nested virtualization by defining/modifying the nested_virtualization parameter in a node definition. This currently ONLY works on VMware boxes.

Disks, interfaces, and port_forwards

If you would like to change disks|interfaces|port_forwards feel free to uncomment those sections and adjust them as needed.

Provisioning

If you would like to provision the nodes when they startup you will need to set provision: true in the environment.yml. Also if the box that is to be spun up is Windows based then set windows: true in order for provisioning specific to Windows to occur.

By default the following provisioning will occur:

You may also define custom provisioners either globally or per node to be executed during provisioning.

To define global provisioners, simply edit the environment.yml file and use the following as an example:

# Global provisioners
provisioners:
  - type: shell
    inline: |
      if [ -f /etc/os-release ]; then
          os_name="$(awk -F= '/^NAME/{ print $2 }' /etc/os-release | sed 's/"//g')"
          os_version_id="$(awk -F= '/^VERSION_ID/{ print $2}' /etc/os-release | sed 's/"//g')"
          echo $os_name
          echo $os_version_id
      fi
    privileged: true
  # - type: shell
  #   path:
  #     - scripts/test.sh
  #   privileged: false
  # - type: ansible
  #   playbooks:
  #     - test.yml

When it comes to per node provisioning, currently only scripts and ansible_local are supported. Ansible playbook provisioners are easy enough to define which nodes should be executed against already.

To define per node provisioners, use the below as an example to use within the environment.yml file:

nodes:
  - name: node0
    ansible_groups:
      - test_nodes
    box: mrlesmithjr/bionic64
    desktop: false
    disks: []
    interfaces: []
    linked_clone: true
    mem: 512
    provision: true
    # Node specific provisioners
    provisioners:
      # - type: shell
      #   inline: |
      #       if [ -f /etc/os-release ]; then
      #           os_name="$(awk -F= '/^NAME/{ print $2 }' /etc/os-release | sed 's/"//g')"
      #           os_version_id="$(awk -F= '/^VERSION_ID/{ print $2}' /etc/os-release | sed 's/"//g')"
      #           echo $os_name
      #           echo $os_version_id
      #       fi
      #   privileged: true
      - type: shell
        path:
          - scripts/test.sh
        privileged: false
    vcpu: 1
    port_forwards: []
    windows: false

Linked Clones

By default, all VMs are configured to be spun up as linked clones. This is the default to keep disk space to a minimum. You can easily change a VM to either be a linked clone or not by changing or adding the linked_clone: true or linked_clone: false to the environment.yml file in the respective distro folder:

Spinning up environment

When you are ready to spin up your environment simply:

vagrant up

Example `Ubuntu Trusty` environment

For example if I want to spin up a Ubuntu Trusty server node:

cd vagrant-box-templates/Ubuntu/trusty64/server
vagrant up
vagrant ssh

Tearing down environment

When you are all done with your Vagrant environment you can quickly and cleanly tear it all down:

Non-Windows:

    ./scripts/cleanup.sh

Windows:

    cleanup.bat

Unit tests

If you are interested in using these templates for unit testing I have included a beginning script which can be used for spinning up a box or boxes to conduct unit testing. The current main focus on this is to spin up the boxes, provision them based on the roles defined in playbook.yml, test idempotency and then tear everything down. This script will create a logs directory which will contain all of the output collected from the unit test. This is not perfect at this time but it does work fairly well for basic testing. I will be adding more functionality over time and definitely welcome feedback.

Executing unit tests

In order to effectively conduct a unit test all you need to do is adjust the environment.yml file and define your nodes, ensure provision: true is defined, define the roles in playbook.yml and then:

./unit-test.sh

And then let the script do all of the work and record the results.

Example unit test results

Below is an example output from a unit test:

ansible 2.3.1.0
  config file = /Users/larry/projects/vagrant/vagrant-box-templates/Ubuntu/xenial64/server/ansible.cfg
  configured module search path = Default w/o overrides
  python version = 2.7.13 (default, Apr  4 2017, 08:47:57) [GCC 4.2.1 Compatible Apple LLVM 8.1.0 (clang-802.0.38)]
ANSIBLE0013 Use shell only when shell functionality is required
/Users/larry/Git_Projects/GitHub/mrlesmithjr/ansible-base/handlers/main.yml:3
Task/Handler: update resolvconf

 [WARNING]: Host file not found: /etc/ansible/hosts
 [WARNING]: provided hosts list is empty, only localhost is available

playbook: playbook.yml
Bringing machine 'node0' up with 'virtualbox' provider...
==> node0: Importing base box 'mrlesmithjr/xenial64'...

�[KProgress: 10%
�[KProgress: 20%
�[KProgress: 30%
�[KProgress: 40%
�[KProgress: 50%
�[KProgress: 60%
�[KProgress: 70%
�[KProgress: 80%
�[KProgress: 90%
�[K==> node0: Matching MAC address for NAT networking...
==> node0: Checking if box 'mrlesmithjr/xenial64' is up to date...
==> node0: Setting the name of the VM: server_node0_1498705353100_6863
==> node0: Clearing any previously set network interfaces...
==> node0: Preparing network interfaces based on configuration...
    node0: Adapter 1: nat
    node0: Adapter 2: hostonly
==> node0: Forwarding ports...
    node0: 22 (guest) => 2222 (host) (adapter 1)
==> node0: Running 'pre-boot' VM customizations...
==> node0: Booting VM...
==> node0: Waiting for machine to boot. This may take a few minutes...
    node0: SSH address: 127.0.0.1:2222
    node0: SSH username: vagrant
    node0: SSH auth method: private key
    node0:
    node0: Vagrant insecure key detected. Vagrant will automatically replace
    node0: this with a newly generated keypair for better security.
    node0:
    node0: Inserting generated public key within guest...
    node0: Removing insecure key from the guest if it's present...
    node0: Key inserted! Disconnecting and reconnecting using new SSH key...
==> node0: Machine booted and ready!
==> node0: Checking for guest additions in VM...
==> node0: Setting hostname...
==> node0: Configuring and enabling network interfaces...
==> node0: Mounting shared folders...
    node0: /vagrant => /Users/larry/projects/vagrant/vagrant-box-templates/Ubuntu/xenial64/server
==> node0: Running provisioner: shell...
    node0: Running: /var/folders/x5/wbmc7zqj1nv4cnjxjqls86sh0000gn/T/vagrant-shell20170628-82789-jpoks9.sh
==> node0: Hit:1 http://us.archive.ubuntu.com/ubuntu xenial InRelease
==> node0: Get:2 http://us.archive.ubuntu.com/ubuntu xenial-updates InRelease [102 kB]
==> node0: Get:3 http://security.ubuntu.com/ubuntu xenial-security InRelease [102 kB]
==> node0: Get:4 http://us.archive.ubuntu.com/ubuntu xenial-backports InRelease [102 kB]
==> node0: Get:5 http://us.archive.ubuntu.com/ubuntu xenial-updates/main amd64 Packages [568 kB]
==> node0: Get:6 http://us.archive.ubuntu.com/ubuntu xenial-updates/main i386 Packages [549 kB]
==> node0: Get:7 http://security.ubuntu.com/ubuntu xenial-security/main amd64 Packages [294 kB]
==> node0: Get:8 http://us.archive.ubuntu.com/ubuntu xenial-updates/main Translation-en [230 kB]
==> node0: Get:9 http://us.archive.ubuntu.com/ubuntu xenial-updates/restricted amd64 Packages [7,772 B]
==> node0: Get:10 http://us.archive.ubuntu.com/ubuntu xenial-updates/restricted i386 Packages [7,772 B]
==> node0: Get:11 http://us.archive.ubuntu.com/ubuntu xenial-updates/restricted Translation-en [2,548 B]
==> node0: Get:12 http://us.archive.ubuntu.com/ubuntu xenial-updates/universe amd64 Packages [490 kB]
==> node0: Get:13 http://us.archive.ubuntu.com/ubuntu xenial-updates/universe i386 Packages [471 kB]
==> node0: Get:14 http://security.ubuntu.com/ubuntu xenial-security/main i386 Packages [278 kB]
==> node0: Get:15 http://us.archive.ubuntu.com/ubuntu xenial-updates/universe Translation-en [194 kB]
==> node0: Get:16 http://us.archive.ubuntu.com/ubuntu xenial-updates/multiverse amd64 Packages [8,932 B]
==> node0: Get:17 http://us.archive.ubuntu.com/ubuntu xenial-updates/multiverse i386 Packages [7,992 B]
==> node0: Get:18 http://us.archive.ubuntu.com/ubuntu xenial-updates/multiverse Translation-en [4,460 B]
==> node0: Get:19 http://us.archive.ubuntu.com/ubuntu xenial-backports/main amd64 Packages [4,688 B]
==> node0: Get:20 http://us.archive.ubuntu.com/ubuntu xenial-backports/main i386 Packages [4,692 B]
==> node0: Get:21 http://us.archive.ubuntu.com/ubuntu xenial-backports/main Translation-en [3,216 B]
==> node0: Get:22 http://us.archive.ubuntu.com/ubuntu xenial-backports/universe amd64 Packages [5,804 B]
==> node0: Get:23 http://us.archive.ubuntu.com/ubuntu xenial-backports/universe i386 Packages [5,812 B]
==> node0: Get:24 http://us.archive.ubuntu.com/ubuntu xenial-backports/universe Translation-en [3,004 B]
==> node0: Get:25 http://security.ubuntu.com/ubuntu xenial-security/main Translation-en [125 kB]
==> node0: Get:26 http://security.ubuntu.com/ubuntu xenial-security/restricted amd64 Packages [7,420 B]
==> node0: Get:27 http://security.ubuntu.com/ubuntu xenial-security/restricted i386 Packages [7,420 B]
==> node0: Get:28 http://security.ubuntu.com/ubuntu xenial-security/restricted Translation-en [2,428 B]
==> node0: Get:29 http://security.ubuntu.com/ubuntu xenial-security/universe amd64 Packages [140 kB]
==> node0: Get:30 http://security.ubuntu.com/ubuntu xenial-security/universe i386 Packages [125 kB]
==> node0: Get:31 http://security.ubuntu.com/ubuntu xenial-security/universe Translation-en [72.7 kB]
==> node0: Get:32 http://security.ubuntu.com/ubuntu xenial-security/multiverse amd64 Packages [2,748 B]
==> node0: Get:33 http://security.ubuntu.com/ubuntu xenial-security/multiverse i386 Packages [2,908 B]
==> node0: Fetched 3,934 kB in 1s (2,118 kB/s)
==> node0: Reading package lists...
==> node0: Reading package lists...
==> node0: Building dependency tree...
==> node0: Reading state information...
==> node0: The following additional packages will be installed:
==> node0:   libpython-stdlib libpython2.7-minimal libpython2.7-stdlib python python2.7
==> node0:   python2.7-minimal
==> node0: Suggested packages:
==> node0:   python-doc python-tk python2.7-doc binfmt-support
==> node0: The following NEW packages will be installed:
==> node0:   libpython-stdlib libpython2.7-minimal libpython2.7-stdlib python
==> node0:   python-minimal python2.7 python2.7-minimal
==> node0: 0 upgraded, 7 newly installed, 0 to remove and 93 not upgraded.
==> node0: Need to get 3,915 kB of archives.
==> node0: After this operation, 16.6 MB of additional disk space will be used.
==> node0: Get:1 http://us.archive.ubuntu.com/ubuntu xenial-updates/main amd64 libpython2.7-minimal amd64 2.7.12-1ubuntu0~16.04.1 [339 kB]
==> node0: Get:2 http://us.archive.ubuntu.com/ubuntu xenial-updates/main amd64 python2.7-minimal amd64 2.7.12-1ubuntu0~16.04.1 [1,295 kB]
==> node0: Get:3 http://us.archive.ubuntu.com/ubuntu xenial/main amd64 python-minimal amd64 2.7.11-1 [28.2 kB]
==> node0: Get:4 http://us.archive.ubuntu.com/ubuntu xenial-updates/main amd64 libpython2.7-stdlib amd64 2.7.12-1ubuntu0~16.04.1 [1,884 kB]
==> node0: Get:5 http://us.archive.ubuntu.com/ubuntu xenial-updates/main amd64 python2.7 amd64 2.7.12-1ubuntu0~16.04.1 [224 kB]
==> node0: Get:6 http://us.archive.ubuntu.com/ubuntu xenial/main amd64 libpython-stdlib amd64 2.7.11-1 [7,656 B]
==> node0: Get:7 http://us.archive.ubuntu.com/ubuntu xenial/main amd64 python amd64 2.7.11-1 [137 kB]
==> node0: dpkg-preconfigure: unable to re-open stdin: No such file or directory
==> node0: Fetched 3,915 kB in 1s (2,962 kB/s)
==> node0: Selecting previously unselected package libpython2.7-minimal:amd64.
==> node0: (Reading database ...
==> node0: (Reading database ... 5%
==> node0: (Reading database ... 10%
==> node0: (Reading database ... 15%
==> node0: (Reading database ... 20%
==> node0: (Reading database ... 25%
==> node0: (Reading database ... 30%
==> node0: (Reading database ... 35%
==> node0: (Reading database ... 40%
==> node0: (Reading database ... 45%
==> node0: (Reading database ... 50%
==> node0: (Reading database ... 55%
==> node0: (Reading database ... 60%
==> node0: (Reading database ... 65%
==> node0: (Reading database ... 70%
==> node0: (Reading database ... 75%
==> node0: (Reading database ... 80%
==> node0: (Reading database ... 85%
==> node0: (Reading database ... 90%
==> node0: (Reading database ... 95%
==> node0: (Reading database ... 100%
==> node0: (Reading database ...
==> node0: 70600 files and directories currently installed.)
==> node0: Preparing to unpack .../libpython2.7-minimal_2.7.12-1ubuntu0~16.04.1_amd64.deb ...
==> node0: Unpacking libpython2.7-minimal:amd64 (2.7.12-1ubuntu0~16.04.1) ...
==> node0: Selecting previously unselected package python2.7-minimal.
==> node0: Preparing to unpack .../python2.7-minimal_2.7.12-1ubuntu0~16.04.1_amd64.deb ...
==> node0: Unpacking python2.7-minimal (2.7.12-1ubuntu0~16.04.1) ...
==> node0: Selecting previously unselected package python-minimal.
==> node0: Preparing to unpack .../python-minimal_2.7.11-1_amd64.deb ...
==> node0: Unpacking python-minimal (2.7.11-1) ...
==> node0: Selecting previously unselected package libpython2.7-stdlib:amd64.
==> node0: Preparing to unpack .../libpython2.7-stdlib_2.7.12-1ubuntu0~16.04.1_amd64.deb ...
==> node0: Unpacking libpython2.7-stdlib:amd64 (2.7.12-1ubuntu0~16.04.1) ...
==> node0: Selecting previously unselected package python2.7.
==> node0: Preparing to unpack .../python2.7_2.7.12-1ubuntu0~16.04.1_amd64.deb ...
==> node0: Unpacking python2.7 (2.7.12-1ubuntu0~16.04.1) ...
==> node0: Selecting previously unselected package libpython-stdlib:amd64.
==> node0: Preparing to unpack .../libpython-stdlib_2.7.11-1_amd64.deb ...
==> node0: Unpacking libpython-stdlib:amd64 (2.7.11-1) ...
==> node0: Processing triggers for man-db (2.7.5-1) ...
==> node0: Processing triggers for mime-support (3.59ubuntu1) ...
==> node0: Setting up libpython2.7-minimal:amd64 (2.7.12-1ubuntu0~16.04.1) ...
==> node0: Setting up python2.7-minimal (2.7.12-1ubuntu0~16.04.1) ...
==> node0: Linking and byte-compiling packages for runtime python2.7...
==> node0: Setting up python-minimal (2.7.11-1) ...
==> node0: Selecting previously unselected package python.
==> node0: (Reading database ...
==> node0: (Reading database ... 5%
==> node0: (Reading database ... 10%
==> node0: (Reading database ... 15%
==> node0: (Reading database ... 20%
==> node0: (Reading database ... 25%
==> node0: (Reading database ... 30%
==> node0: (Reading database ... 35%
==> node0: (Reading database ... 40%
==> node0: (Reading database ... 45%
==> node0: (Reading database ... 50%
==> node0: (Reading database ... 55%
==> node0: (Reading database ... 60%
==> node0: (Reading database ... 65%
==> node0: (Reading database ... 70%
==> node0: (Reading database ... 75%
==> node0: (Reading database ... 80%
==> node0: (Reading database ... 85%
==> node0: (Reading database ... 90%
==> node0: (Reading database ... 95%
==> node0: (Reading database ... 100%
==> node0: (Reading database ...
==> node0: 71347 files and directories currently installed.)
==> node0: Preparing to unpack .../python_2.7.11-1_amd64.deb ...
==> node0: Unpacking python (2.7.11-1) ...
==> node0: Processing triggers for man-db (2.7.5-1) ...
==> node0: Setting up libpython2.7-stdlib:amd64 (2.7.12-1ubuntu0~16.04.1) ...
==> node0: Setting up python2.7 (2.7.12-1ubuntu0~16.04.1) ...
==> node0: Setting up libpython-stdlib:amd64 (2.7.11-1) ...
==> node0: Setting up python (2.7.11-1) ...
==> node0: Running provisioner: ansible...
    node0: Running ansible-playbook...

PLAY [all] *********************************************************************

TASK [Gathering Facts] *********************************************************
ok: [node0]

TASK [Updating Apt Cache (Debian)] *********************************************
ok: [node0]

TASK [Installing Ansible Pre-Reqs (Alpine)] ************************************
skipping: [node0] => (item=[])

TASK [Installing Python Packages (Alpine)] *************************************
skipping: [node0] => (item=[])

TASK [Installing Python Packages (Alpine)] *************************************
skipping: [node0] => (item=[])

TASK [Installing Ansible Pre-Reqs (Debian)] ************************************
changed: [node0] => (item=[u'build-essential', u'libffi-dev', u'libssl-dev', u'python-dev', u'python-pip', u'python-setuptools'])

TASK [Installing EPEL Repo (RedHat)] *******************************************
skipping: [node0]

TASK [Installing Ansible Pre-Reqs (RedHat)] ************************************
skipping: [node0] => (item=[])

TASK [Installing Ansible Pre-Reqs (Fedora)] ************************************
skipping: [node0]

TASK [Installing Ansible Pre-Reqs (Fedora)] ************************************
skipping: [node0] => (item=[])

TASK [Installing Ansible Pre-Reqs (openSUSE)] **********************************
skipping: [node0] => (item=[])

TASK [Updating Python Modules] *************************************************
changed: [node0] => (item=pip)
changed: [node0] => (item=cffi)

TASK [Installing Ansible] ******************************************************
changed: [node0]

TASK [Ensuring host_vars Directory Exists] *************************************
changed: [node0 -> localhost]

TASK [Ensuring Host File Exists In host_vars] **********************************
ok: [node0 -> localhost]

TASK [Creating Missing host_vars] **********************************************
changed: [node0 -> localhost]

TASK [Updating ansible_ssh_host] ***********************************************
skipping: [node0]

TASK [Updating ansible_ssh_host] ***********************************************
changed: [node0 -> localhost]

TASK [Capturing eth1 IP Address (Alpine)] **************************************
skipping: [node0]

TASK [Updating ansible_ssh_host (Alpine)] **************************************
skipping: [node0]

TASK [Updating ansible_ssh_port] ***********************************************
changed: [node0 -> localhost]

TASK [Updating ansible_ssh_key] ************************************************
changed: [node0 -> localhost]

TASK [Ensuring host_vars Is YAML Formatted] ************************************
changed: [node0 -> localhost]

PLAY RECAP *********************************************************************
node0                      : ok=12   changed=9    unreachable=0    failed=0

==> node0: Running provisioner: ansible...
    node0: Running ansible-playbook...

PLAY [test_nodes] **************************************************************

TASK [Gathering Facts] *********************************************************
ok: [node0]

TASK [ansible-base : debian | running apt-get update] **************************
ok: [node0]

TASK [ansible-base : debian | running apt-get update (forced)] *****************
skipping: [node0]

TASK [ansible-base : debian | installing base packages] ************************
changed: [node0] => (item=[u'build-essential', u'software-properties-common', u'curl', u'git', u'git-core', u'ntp', u'scsitools'])

TASK [ansible-base : debian | resetting /etc/dhcp/dhclient.conf to default] ****
skipping: [node0]

TASK [ansible-base : debian_update_dns_nameservers | setting dns nameservers] ***
skipping: [node0]

TASK [ansible-base : debian | setting dns search suffix] ***********************
skipping: [node0]

TASK [ansible-base : redhat | installing base packages] ************************
skipping: [node0] => (item=[])

TASK [ansible-base : redhat | installing base packages] ************************
skipping: [node0] => (item=[])

TASK [ansible-dnsmasq : alpine | Installing DNSMasq] ***************************
skipping: [node0]

TASK [ansible-dnsmasq : debian | Installing DNSMasq] ***************************
changed: [node0]

TASK [ansible-dnsmasq : redhat | Installing DNSMasq] ***************************
skipping: [node0]

TASK [ansible-dnsmasq : redhat | Installing DNSMasq] ***************************
skipping: [node0]

TASK [ansible-dnsmasq : redhat | Ensuring DNSMasq Service is Enabled and Started] ***
skipping: [node0]

TASK [ansible-dnsmasq : opensuse | Installing DNSMasq] *************************
skipping: [node0]

TASK [ansible-dnsmasq : opensuse | Ensuring DNSMasq Service Is Enabled and Started] ***
skipping: [node0]

TASK [ansible-dnsmasq : dnsmasq_config | Configuring DNSMasq] ******************
changed: [node0]

TASK [ansible-dnsmasq : dnsmasq_config | Ensuring /var/lib/tftpboot Exists] ****
skipping: [node0]

RUNNING HANDLER [ansible-dnsmasq : restart dnsmasq] ****************************
changed: [node0]

PLAY RECAP *********************************************************************
node0                      : ok=6    changed=4    unreachable=0    failed=0

Idempotence test: pass
==> node0: Forcing shutdown of VM...
==> node0: Destroying VM and associated drives...

Learning Ansible

If you are interested in learning Ansible ensure that Ansible is installed on your host machine.

Ansible Groups

If you need to create different Ansible groups for your project all you need to do is edit the environment.yml. For example if I am working on a project for Docker Swarm I might want to separate out my nodes by Swarm Managers and Swarm Workers. So I would something similar to below:

environment.yml:

- name: "node0"
  ansible_groups:
    - "swarm_managers"
  box: "mrlesmithjr/xenial64"
  desktop: false
  # disks:
  #   - size: 10
  #     controller: "SATA Controller"
  #   - size: 10
  #     controller: "SATA Controller"
  interfaces:
    - ip: 192.168.250.10
      auto_config: true
      method: "static"
  #   - ip: 192.168.1.10
  #     auto_config: false
  #     method: 'static'
  #     network_name: 'network-1'
  linked_clone: true
  mem: 512
  provision: true
  vcpu: 1
  # port_forwards:
  #   - guest: 80
  #     host: 8080
  #   - guest: 443
  #     host: 4433
- name: "node1"
  ansible_groups:
    - "docker_swarm_workers"
  box: "mrlesmithjr/xenial64"
  desktop: false
  # disks:
  #   - size: 10
  #     controller: "SATA Controller"
  #   - size: 10
  #     controller: "SATA Controller"
  interfaces:
    - ip: 192.168.250.11
      auto_config: true
      method: "static"
  #   - ip: 192.168.1.10
  #     auto_config: false
  #     method: 'static'
  #     network_name: 'network-1'
  linked_clone: true
  mem: 512
  provision: true
  vcpu: 1
  # port_forwards:
  #   - guest: 80
  #     host: 8080
  #   - guest: 443
  #     host: 4433

And that would be all you need to do and those groups would be created when we do a vagrant up. As you can see there were no changes required in the Vagrantfile to make this all happen. And you will be able to define your playbook as you normally would.

Ansible playbooks

Within in the playbooks directory there is an included playbook.yml file to use as a skeleton playbook. This playbook is always executed when provisioning. So, you may want to just modify this playbook to suit your needs. However, you may create additional playbooks or leverage existing ones by adapting your environment.yml within the distro folders.

Ansible `requirements.yml`

Within the root folder there is also an included requirements.yml file which includes some basics Ansible roles that can be installed to get an understanding of using this method.

Installing Ansible roles

Global Ansible roles installation

If you would like to install the Ansible roles globally on your host machine you can do so by:

sudo ansible-galaxy install -r requirements.yml

Non-Global Ansible roles installation

If you would like to install the Ansible roles in the current directory in a specific distro version you can do so by:

For example for Ubuntu Xenial:

cd vagrant-box-templates/Ubuntu/xenial64/server
ansible-galaxy install -r requirements.yml -p ./roles

Using existing folder of Ansible roles

If you have an existing folder which includes some Ansible roles you can very easily leverage those as well.

TIP: This is something that I do for development of roles.

Simply edit the included ansible.cfg file and change the following:

From:

# additional paths to search for roles in, colon separated
#roles_path    = /etc/ansible/roles

To:

# additional paths to search for roles in, colon separated
roles_path    = /etc/ansible/roles:~/Git_Projects/GitHub/mrlesmithjr:roles

License

MIT

Author Information

Larry Smith Jr.

Name		Name	Last commit message	Last commit date
Latest commit History 425 Commits
Alpine		Alpine
Arch		Arch
CentOS		CentOS
Debian		Debian
Elementary		Elementary
Fedora		Fedora
FreeBSD		FreeBSD
FreeNAS/11.2/server		FreeNAS/11.2/server
LinuxMint		LinuxMint
NethServer/7/server		NethServer/7/server
Oracle-Linux		Oracle-Linux
Rocky/8/server		Rocky/8/server
Scientific-Linux/7/server		Scientific-Linux/7/server
Test/dummy		Test/dummy
Ubuntu		Ubuntu
VyOS/1.1.8/networking		VyOS/1.1.8/networking
Windows		Windows
openSUSE		openSUSE
playbooks		playbooks
scripts		scripts
.gitignore		.gitignore
.yamllint.yml		.yamllint.yml
CHANGELOG.md		CHANGELOG.md
LICENSE.md		LICENSE.md
README.md		README.md
Vagrantfile		Vagrantfile
ansible.cfg		ansible.cfg
cleanup.bat		cleanup.bat
environment.yml.j2		environment.yml.j2
poetry.lock		poetry.lock
pyproject.toml		pyproject.toml
requirements-dev.in		requirements-dev.in
requirements-dev.txt		requirements-dev.txt
requirements.in		requirements.in
requirements.txt		requirements.txt
requirements.yml		requirements.yml
unit-test.sh		unit-test.sh
utils.py		utils.py

License

mrlesmithjr/vagrant-box-templates

Folders and files

Latest commit

History

Repository files navigation

Vagrant Box Templates

Purpose

Requirements

Software

Alpine box requirements

vagrant-alpine plugin

/vagrant synced_folder

Setting up sudoers

OS X

Ubuntu

Fedora

Included Box Distros

Useful information

Building Vagrant Boxes

Vagrantfile

File structure

Working on different projects

Create development environment

Create project development environment

Keeping development environment up to date with this repo

Using Docker containers

Usage

Getting started

Clone repo

Choose distro

Customizing environment

Nested Virtualization

Disks, interfaces, and port_forwards

Provisioning

Linked Clones

Spinning up environment

Example Ubuntu Trusty environment

Tearing down environment

Unit tests

Executing unit tests

Example unit test results

Learning Ansible

Ansible Groups

Ansible playbooks

Ansible requirements.yml

Installing Ansible roles

Global Ansible roles installation

Non-Global Ansible roles installation

Using existing folder of Ansible roles

License

Author Information

About

Topics

Resources

License

Code of conduct

Stars

Watchers

Forks

Releases 6

Packages 0

Contributors 2

Languages

`vagrant-alpine` plugin

`/vagrant` synced_folder

Setting up `sudoers`

`OS X`

`Ubuntu`

`Fedora`

Example `Ubuntu Trusty` environment

Ansible `requirements.yml`

Packages