#Kernel 4.14 for BananaPi R2

##HowTo compile kernel:

- checkout main branch

- run "./build.sh importconfig" to import my config for bpi-r2

- run "./build.sh config" to configure the kernel (menuconfig)

- run "./build.sh" to start building kernel

Internal Wifi-driver (MT6625L) included

To use it:

copy firmware and tools to SD-Card from https://github.com/BPI-SINOVOIP/BPI-R2-bsp/tree/master/vendor/mediatek/connectivity or folder "utils"

make a clean boot of bpi-r2

remove wpasupplicant if installed: "apt-get remove wpasupplicant"

run the following commands:

wmt_loader

stp_uart_launcher -p /etc/firmware &

echo A >/dev/wmtWifi #(activate AP-Mode)

if you type "ip a" you should see a ap0-device

now you can add an IP-address, start a dhcp-server and start hostapd on it

more information: http://www.fw-web.de/dokuwiki/doku.php?id=en/bpi-r2/wlan

- currently no HDMI is working

- hnat also not fully merged

- internal Bluetooth not working yet

- internal wifi has a bug when hostapd is killed see issue #4

Master-Branch