- Important Change from v1.5.0
- Why do we need this WebServer_WT32_ETH01 library
- Changelog
- Prerequisites
- Installation
- Libraries' Patches
- HOWTO Use analogRead() with ESP32 running WiFi and/or BlueTooth (BT/BLE)
- Usage
- Examples
- Original Examples
- 1. AdvancedWebServer
- 2. HelloServer
- 3. HelloServer2
- 4. HttpBasicAuth
- 5. MQTTClient_Auth
- 6. MQTTClient_Basic
- 7. MQTT_ThingStream
- 8. PostServer
- 9. SimpleAuthentication
- 10. UdpNTPClient
- 11. UdpSendReceive
- 12. WebClient
- 13. WebClientRepeating
- 14. WebServer
- 15. ESP32_FS_EthernetWebServer
- 16. serveStatic
- 17. serveStaticLoadFile
- 18. multiFileProject New
- HTTPClient Examples
- HTTPS and MQTTS Examples
- OTA Example
- Original Examples
- Example AdvancedWebServer
- Debug Terminal Output Samples
- 1. AdvancedWebServer on ESP32_DEV with ETH_PHY_LAN8720
- 2. ESP32_FS_EthernetWebServer on ESP32_DEV with ETH_PHY_LAN8720
- 3. MQTT_ThingStream on ESP32_DEV with ETH_PHY_LAN8720
- 4. MQTTClient_Auth on ESP32_DEV with ETH_PHY_LAN8720
- 5. MQTTClient_Basic on ESP32_DEV with ETH_PHY_LAN8720
- 6. WebClient on ESP32_DEV with ETH_PHY_LAN8720
- 7. UdpNTPClient on ESP32_DEV with ETH_PHY_LAN8720
- 8. BasicHttpClient on ESP32_DEV with ETH_PHY_LAN8720
- 9. BasicHttpsClient on ESP32_DEV with ETH_PHY_LAN8720
- 10. WebClientMulti_SSL on ESP32_DEV with ETH_PHY_LAN8720
- 11. MQTTClient_SSL_Complex on ESP32_DEV with ETH_PHY_LAN8720
- 12. MQTTS_ThingStream on ESP32_DEV with ETH_PHY_LAN8720
- 13. MQTTClient_SSL on ESP32_DEV with ETH_PHY_LAN8720
- 14. MQTTClient_SSL_Auth on ESP32_DEV with ETH_PHY_LAN8720
- Debug
- Troubleshooting
- Releases
- Issues
- TO DO
- DONE
- Contributions and Thanks
- Contributing
- License
- Copyright
Please have a look at HOWTO Fix Multiple Definitions
Linker Error
Why do we need this WebServer_WT32_ETH01 library
ESP32 Core v2.0.0
introduces new enum breaking almost all WT32_ETH01
codes written for core v1.0.6-
.
It's really strange to define a breaking enum arduino_event_id_t
in WiFiGeneric.h#L36-L78, compared to the old system_event_id_t
, now placed in esp_event_legacy.h#L29-L63
It's better to preserve the old enum order and just adding new items to do no harm to pre-2.0.0 codes
- Releases
v1.2.0-
to be used for ESP32 corev1.0.6-
only - Releases
v1.3.0
can be used for either ESP32 corev2.0.0
orv1.0.6-
. Default is using corev2.0.0
To use with core v1.0.6-, just define in your sketch
#define USING_CORE_ESP32_CORE_V200_PLUS false
- Releases
v1.4.0
can be used for either ESP32 corev2.0.0
orv1.0.6-
. Autodetect core
This WebServer_WT32_ETH01 library is a simple yet complete WebServer wrapper library for ESP32-based WT32_ETH01 boards using LAN8720 Ethernet. The functions are similar and compatible to those of ESP32 WebServer
and ESP8266WebServer
libraries to make life much easier to port sketches from ESP8266/ESP32.
This WebServer_WT32_ETH01 library also provides high-level HTTP(S), MQTT(S) and WebSockets Client by using the functions from ESP32's HTTPClient Library
The library provides these features:
- TCP Server and Client
- UDP Server and Client
- HTTP(S) Server and Client
- HTTP(S) GET and POST requests, provides argument parsing, handles one client at a time.
- High-level HTTP(S) (GET, POST, PUT, PATCH, DELETE), MQTT(S) and WebSocket Client.
Library is just a wrapper for:
This WebServer_WT32_ETH01 library currently supports these following boards:
- WT32_ETH01 boards using ESP32-based boards and LAN8720 Ethernet
Arduino IDE 1.8.19
for Arduino.ESP32 Core 2.0.5
for ESP32-based WT32_ETH01 boards using releasev1.3.0
.ESP32 Core 1.0.6-
for ESP32-based WT32_ETH01 boards using releasev1.2.0-
The best and easiest way is to use Arduino Library Manager
. Search for WebServer_WT32_ETH01
, then select / install the latest version.
You can also use this link for more detailed instructions.
- Navigate to WebServer_WT32_ETH01 page.
- Download the latest release
WebServer_WT32_ETH01-main.zip
. - Extract the zip file to
WebServer_WT32_ETH01-main
directory - Copy the whole
WebServer_WT32_ETH01-main
folder to Arduino libraries' directory such as~/Arduino/libraries/
.
- Install VS Code
- Install PlatformIO
- Install WebServer_WT32_ETH01 library by using Library Manager. Search for WebServer_WT32_ETH01 in Platform.io Author's Libraries
- Use included platformio.ini file from examples to ensure that all dependent libraries will installed automatically. Please visit documentation for the other options and examples at Project Configuration File
To fix ESP32 compile error
, just copy the following file into the ESP32
cores/esp32 directory (e.g. ./arduino-1.8.16/hardware/espressif/cores/esp32) to overwrite the old file:
The current library implementation, using xyz-Impl.h
instead of standard xyz.cpp
, possibly creates certain Multiple Definitions
Linker error in certain use cases.
You can include this .hpp
file
// Can be included as many times as necessary, without `Multiple Definitions` Linker Error
#include "WebServer_WT32_ETH01.hpp" //https://github.com/khoih-prog/WebServer_WT32_ETH01
in many files. But be sure to use the following .h
file in just 1 .h
, .cpp
or .ino
file, which must not be included in any other file, to avoid Multiple Definitions
Linker Error
// To be included only in main(), .ino with setup() to avoid `Multiple Definitions` Linker Error
#include "WebServer_WT32_ETH01.h" //https://github.com/khoih-prog/WebServer_WT32_ETH01
Check the new multiFileProject example for a HOWTO
demo.
Please have a look at ESP_WiFiManager Issue 39: Not able to read analog port when using the autoconnect example to have more detailed description and solution of the issue.
- ADC1 controls ADC function for pins GPIO32-GPIO39
- ADC2 controls ADC function for pins GPIO0, 2, 4, 12-15, 25-27
Look in file adc_common.c
In ADC2, there're two locks used for different cases:
lock shared with app and Wi-Fi: ESP32: When Wi-Fi using the ADC2, we assume it will never stop, so app checks the lock and returns immediately if failed. ESP32S2: The controller's control over the ADC is determined by the arbiter. There is no need to control by lock.
lock shared between tasks: when several tasks sharing the ADC2, we want to guarantee all the requests will be handled. Since conversions are short (about 31us), app returns the lock very soon, we use a spinlock to stand there waiting to do conversions one by one.
adc2_spinlock should be acquired first, then adc2_wifi_lock or rtc_spinlock.
- In order to use ADC2 for other functions, we have to acquire complicated firmware locks and very difficult to do
- So, it's not advisable to use ADC2 with WiFi/BlueTooth (BT/BLE).
- Use ADC1, and pins GPIO32-GPIO39
- If somehow it's a must to use those pins serviced by ADC2 (GPIO0, 2, 4, 12, 13, 14, 15, 25, 26 and 27), use the fix mentioned at the end of ESP_WiFiManager Issue 39: Not able to read analog port when using the autoconnect example to work with ESP32 WiFi/BlueTooth (BT/BLE).
WebServer server(80);
Creates the WebServer_WT32_ETH01 class object.
Parameters:
host port number: int port
(default is the standard HTTP port 80)
Starting the server
void begin();
Handling incoming client requests
void handleClient();
Disabling the server
void close();
void stop();
Both methods function the same
Client request handlers
void on();
void addHandler();
void onNotFound();
void onFileUpload();
Example:
server.on("/", handlerFunction);
server.onNotFound(handlerFunction); // called when handler is not assigned
server.onFileUpload(handlerFunction); // handle file uploads
Sending responses to the client
void send();
void send_P();
Parameters:
code
- HTTP response code, can be 200
or 404
, etc.
content_type
- HTTP content type, like "text/plain"
or "image/png"
, etc.
content
- actual content body
Getting information about request arguments
const String & arg();
const String & argName();
int args();
bool hasArg();
Function usage:
arg
- get request argument value, use arg("plain")
to get POST body
argName
- get request argument name
args
- get arguments count
hasArg
- check if argument exist
Getting information about request headers
const String & header();
const String & headerName();
const String & hostHeader();
int headers();
bool hasHeader();
Function usage:
header
- get request header value
headerName
- get request header name
hostHeader
- get request host header if available, else empty string
headers
- get header count
hasHeader
- check if header exist
Authentication
bool authenticate();
void requestAuthentication();
Function usage:
authenticate
- server authentication, returns true if client is authenticated else false
requestAuthentication
- sends authentication failure response to the client
Example Usage:
if(!server.authenticate(username, password)){
server.requestAuthentication();
}
const String & uri(); // get the current uri
HTTPMethod method(); // get the current method
WiFiClient client(); // get the current client
HTTPUpload & upload(); // get the current upload
void setContentLength(); // set content length
void sendHeader(); // send HTTP header
void sendContent(); // send content
void sendContent_P();
void collectHeaders(); // set the request headers to collect
void serveStatic();
size_t streamFile();
- AdvancedWebServer
- HelloServer
- HelloServer2
- HttpBasicAuth
- MQTTClient_Auth
- MQTTClient_Basic
- MQTT_ThingStream
- PostServer
- SimpleAuthentication
- UdpNTPClient
- UdpSendReceive
- WebClient
- WebClientRepeating
- WebServer
- ESP32_FS_EthernetWebServer
- serveStatic
- serveStaticLoadFile
- multiFileProject New
- MQTTClient_SSL
- MQTTClient_SSL_Auth
- MQTTClient_SSL_Complex
- MQTTS_ThingStream
- WebClientMulti_SSL
- WebClient_SSL
Example AdvancedWebServer
WebServer_WT32_ETH01/examples/AdvancedWebServer/AdvancedWebServer.ino
Lines 41 to 210 in 49acabe
The following are debug terminal output and screen shot when running example AdvancedWebServer on ESP32_DEV with ETH_PHY_LAN8720 (WT32_ETH01)
Starting AdvancedWebServer on ESP32_DEV with ETH_PHY_LAN8720
WebServer_WT32_ETH01 v1.5.1 for core v2.0.0
ETH Started
ETH Connected
ETH MAC: A8:03:2A:A1:61:73, IPv4: 192.168.2.127, FULL_DUPLEX, 100Mbps
HTTP EthernetWebServer is @ IP : 192.168.2.127
..
The terminal output of WT32_ETH01 running ESP32_FS_EthernetWebServer
Starting ESP32_FS_EthernetWebServer on ESP32_DEV with ETH_PHY_LAN8720
WebServer_WT32_ETH01 v1.5.1 for core v2.0.0
ETH Started
ETH Connected
ETH MAC: A8:03:2A:A1:61:73, IPv4: 192.168.2.127, FULL_DUPLEX, 100Mbps
/home/kh/Arduino/libraries/LITTLEFS-master/src/lfs.c:1003:error: Corrupted dir pair at {0x0, 0x1}
E (4029) esp_littlefs: mount failed, (-84)
E (4033) esp_littlefs: Failed to initialize LittleFS
HTTP server started @192.168.2.127
Open http://192.168.2.127/edit to see the file browser
handleFileRead: /
handleFileUpload Name: /CanadaFlag_1.png
handleFileUpload Size: 41214
handleFileUpload Name: /CanadaFlag_2.png
handleFileUpload Size: 8311
handleFileUpload Name: /CanadaFlag_3.jpg
handleFileUpload Size: 11156
handleFileUpload Name: /edit.htm.gz
handleFileUpload Size: 4116
handleFileUpload Name: /favicon.ico
handleFileUpload Size: 1150
handleFileUpload Name: /graphs.js.gz
handleFileUpload Size: 1971
handleFileUpload Name: /index.htm
handleFileUpload Size: 3721
handleFileRead: /
handleFileRead: /graphs.js
handleFileRead: /edit.htm
handleFileRead: /index.htm
handleFileList: /
handleFileList: [{"type":"file","name":"CanadaFlag_1.png"},{"type":"file","name":"CanadaFlag_2.png"},{"type":"file","name":"CanadaFlag_3.jpg"},{"type":"file","name":"edit.htm.gz"},{"type":"file","name":"favicon.ico"},{"type":"file","name":"graphs.js.gz"},{"type":"file","name":"index.htm"}]
handleFileRead: /CanadaFlag_1.png
and the screen shot of the WebServer
The terminal output of WT32_ETH01 running MQTT_ThingStream example
Starting MQTT_ThingStream on ESP32_DEV with ETH_PHY_LAN8720
WebServer_WT32_ETH01 v1.5.1 for core v2.0.0
ETH MAC: A8:03:2A:A1:61:73, IPv4: 192.168.2.232, FULL_DUPLEX, 100Mbps
***************************************
esp32-sniffer/12345678/ble
***************************************
Attempting MQTT connection to mqtt.thingstream.io
...connected
Published connection message successfully!
Subscribed to: esp32-sniffer/12345678/ble
MQTT Message Send : esp32-sniffer/12345678/ble => Hello from MQTT_ThingStream on WT32-ETH01 with ETH_PHY_LAN8720
MQTT Message receive [esp32-sniffer/12345678/ble] Hello from MQTT_ThingStream on WT32-ETH01 with ETH_PHY_LAN8720
MQTT Message Send : esp32-sniffer/12345678/ble => Hello from MQTT_ThingStream on WT32-ETH01 with ETH_PHY_LAN8720
MQTT Message receive [esp32-sniffer/12345678/ble] Hello from MQTT_ThingStream on WT32-ETH01 with ETH_PHY_LAN8720
The terminal output of WT32_ETH01 running MQTTClient_Auth example
Starting MQTTClient_Auth on ESP32_DEV with ETH_PHY_LAN8720
WebServer_WT32_ETH01 v1.5.1 for core v2.0.0
ETH MAC: A8:03:2A:A1:61:73, IPv4: 192.168.2.232, FULL_DUPLEX, 100Mbps
Attempting MQTT connection to broker.emqx.io...connected
Message Send : MQTT_Pub => Hello from MQTTClient_Auth on WT32-ETH01 with ETH_PHY_LAN8720
Message arrived [MQTT_Pub] Hello from MQTTClient_Auth on WT32-ETH01 with ETH_PHY_LAN8720
Message Send : MQTT_Pub => Hello from MQTTClient_Auth on WT32-ETH01 with ETH_PHY_LAN8720
Message arrived [MQTT_Pub] Hello from MQTTClient_Auth on WT32-ETH01 with ETH_PHY_LAN8720
The terminal output of WT32_ETH01 running MQTTClient_Basic example
Starting MQTTClient_Basic on ESP32_DEV with ETH_PHY_LAN8720
WebServer_WT32_ETH01 v1.5.1 for core v2.0.0
ETH MAC: A8:03:2A:A1:61:73, IPv4: 192.168.2.232, FULL_DUPLEX, 100Mbps
Attempting MQTT connection to broker.emqx.io...connected
Message Send : MQTT_Pub => Hello from MQTTClient_Basic on WT32-ETH01 with ETH_PHY_LAN8720
Message arrived [MQTT_Pub] Hello from MQTTClient_Basic on WT32-ETH01 with ETH_PHY_LAN8720
Message Send : MQTT_Pub => Hello from MQTTClient_Basic on WT32-ETH01 with ETH_PHY_LAN8720
Message arrived [MQTT_Pub] Hello from MQTTClient_Basic on WT32-ETH01 with ETH_PHY_LAN8720
Message Send : MQTT_Pub => Hello from MQTTClient_Basic on WT32-ETH01 with ETH_PHY_LAN8720
Message arrived [MQTT_Pub] Hello from MQTTClient_Basic on WT32-ETH01 with ETH_PHY_LAN8720
The terminal output of WT32_ETH01 running WebClient example
Starting WebClient on ESP32_DEV with ETH_PHY_LAN8720
WebServer_WT32_ETH01 v1.5.1 for core v2.0.0
ETH MAC: A8:03:2A:A1:61:73, IPv4: 192.168.2.232, FULL_DUPLEX, 100Mbps
Starting connection to server...
Connected to server
HTTP/1.1 200 OK
Server: nginx/1.4.2
Date: Tue, 06 Jul 2021 04:36:48 GMT
Content-Type: text/plain
Content-Length: 2263
Last-Modified: Wed, 02 Oct 2013 13:46:47 GMT
Connection: close
Vary: Accept-Encoding
ETag: "524c23c7-8d7"
Accept-Ranges: bytes
`:;;;,` .:;;:.
.;;;;;;;;;;;` :;;;;;;;;;;: TM
`;;;;;;;;;;;;;;;` :;;;;;;;;;;;;;;;
:;;;;;;;;;;;;;;;;;; `;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;; .;;;;;;;;;;;;;;;;;;;;
;;;;;;;;:` `;;;;;;;;; ,;;;;;;;;.` .;;;;;;;;
.;;;;;;, :;;;;;;; .;;;;;;; ;;;;;;;
;;;;;; ;;;;;;; ;;;;;;, ;;;;;;.
,;;;;; ;;;;;;.;;;;;;` ;;;;;;
;;;;;. ;;;;;;;;;;;` ``` ;;;;;`
;;;;; ;;;;;;;;;, ;;; .;;;;;
`;;;;: `;;;;;;;; ;;; ;;;;;
,;;;;` `,,,,,,,, ;;;;;;; .,,;;;,,, ;;;;;
:;;;;` .;;;;;;;; ;;;;;, :;;;;;;;; ;;;;;
:;;;;` .;;;;;;;; `;;;;;; :;;;;;;;; ;;;;;
.;;;;. ;;;;;;;. ;;; ;;;;;
;;;;; ;;;;;;;;; ;;; ;;;;;
;;;;; .;;;;;;;;;; ;;; ;;;;;,
;;;;;; `;;;;;;;;;;;; ;;;;;
`;;;;;, .;;;;;; ;;;;;;; ;;;;;;
;;;;;;: :;;;;;;. ;;;;;;; ;;;;;;
;;;;;;;` .;;;;;;;, ;;;;;;;; ;;;;;;;:
;;;;;;;;;:,:;;;;;;;;;: ;;;;;;;;;;:,;;;;;;;;;;
`;;;;;;;;;;;;;;;;;;;. ;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;; :;;;;;;;;;;;;;;;;:
,;;;;;;;;;;;;;, ;;;;;;;;;;;;;;
.;;;;;;;;;` ,;;;;;;;;:
;;; ;;;;;` ;;;;: .;; ;; ,;;;;;, ;;. `;, ;;;;
;;; ;;:;;; ;;;;;; .;; ;; ,;;;;;: ;;; `;, ;;;:;;
,;:; ;; ;; ;; ;; .;; ;; ,;, ;;;,`;, ;; ;;
;; ;: ;; ;; ;; ;; .;; ;; ,;, ;;;;`;, ;; ;;.
;: ;; ;;;;;: ;; ;; .;; ;; ,;, ;;`;;;, ;; ;;`
,;;;;; ;;`;; ;; ;; .;; ;; ,;, ;; ;;;, ;; ;;
;; ,;, ;; .;; ;;;;;: ;;;;;: ,;;;;;: ;; ;;, ;;;;;;
;; ;; ;; ;;` ;;;;. `;;;: ,;;;;;, ;; ;;, ;;;;
Disconnecting from server...
The terminal output of WT32_ETH01 running UdpNTPClient example
Starting UdpNTPClient on ESP32_DEV with ETH_PHY_LAN8720
WebServer_WT32_ETH01 v1.5.1 for core v2.0.0
ETH Started
ETH Connected
ETH MAC: A8:03:2A:A1:61:73, IPv4: 192.168.2.95
FULL_DUPLEX, 100Mbps
UDP Packet received, size 48
From 132.163.96.4, port 123
Seconds since Jan 1 1900 = 3847154050
Unix time = 1638165250
The UTC time is 5:54:10
UDP Packet received, size 48
From 132.163.96.4, port 123
Seconds since Jan 1 1900 = 3847154062
Unix time = 1638165262
The UTC time is 5:54:22
UDP Packet received, size 48
From 132.163.96.4, port 123
Seconds since Jan 1 1900 = 3847154074
Unix time = 1638165274
The UTC time is 5:54:34
UDP Packet received, size 48
From 132.163.96.4, port 123
Seconds since Jan 1 1900 = 3847154086
Unix time = 1638165286
The UTC time is 5:54:46
The terminal output of WT32_ETH01 running BasicHttpClient example
Starting BasicHttpClient on ESP32_DEV with ETH_PHY_LAN8720
WebServer_WT32_ETH01 v1.5.1 for core v2.0.0
ETH MAC: A8:03:2A:A1:61:73, IPv4: 192.168.2.232, FULL_DUPLEX, 100Mbps
[HTTP] begin...
[HTTP] GET...
[HTTP] GET... code: 200
<!doctype html>
<html>
<head>
<title>Example Domain</title>
<meta charset="utf-8" />
<meta http-equiv="Content-type" content="text/html; charset=utf-8" />
<meta name="viewport" content="width=device-width, initial-scale=1" />
<style type="text/css">
body {
background-color: #f0f0f2;
margin: 0;
padding: 0;
font-family: -apple-system, system-ui, BlinkMacSystemFont, "Segoe UI", "Open Sans", "Helvetica Neue", Helvetica, Arial, sans-serif;
}
div {
width: 600px;
margin: 5em auto;
padding: 2em;
background-color: #fdfdff;
border-radius: 0.5em;
box-shadow: 2px 3px 7px 2px rgba(0,0,0,0.02);
}
a:link, a:visited {
color: #38488f;
text-decoration: none;
}
@media (max-width: 700px) {
div {
margin: 0 auto;
width: auto;
}
}
</style>
</head>
<body>
<div>
<h1>Example Domain</h1>
<p>This domain is for use in illustrative examples in documents. You may use this
domain in literature without prior coordination or asking for permission.</p>
<p><a href="https://www.iana.org/domains/example">More information...</a></p>
</div>
</body>
</html>
The terminal output of WT32_ETH01 running BasicHttpsClient example
Starting BasicHttpsClient on ESP32_DEV with ETH_PHY_LAN8720
WebServer_WT32_ETH01 v1.5.1 for core v2.0.0
ETH MAC: A8:03:2A:A1:61:73, IPv4: 192.168.2.232, FULL_DUPLEX, 100Mbps
Waiting for NTP time sync: .
Current time: Tue Jul 6 05:29:39 2021
[HTTPS] begin...
[HTTPS] GET...
[HTTPS] GET... code: 200
<HTML>
<HEAD>
<!-- Created with AOLpress/2.0 -->
<TITLE>Connection Header</TITLE>
</HEAD>
<BODY>
<P>
<IMG ALT="Jigsaw" BORDER="0" WIDTH="212" HEIGHT="49" SRC="/icons/jigsaw">
<H1>
The <I>Connection</I> header
</H1>
<P>
This page will be served to you with the following headers:
<P>
<CODE>ExtensionHeader: ExtensionValue<BR>
Connection: ExtensionHeader</CODE>
<P>
If you're getting this page through a proxy, you should <I>not</I> see the
<I>ExtensionHeader</I> !
<P>
<HR>
<BR>
<A HREF="mailto:[email protected]">[email protected]</A>
</BODY></HTML>
Waiting 10s before the next round...
The terminal output of WT32_ETH01 running WebClientMulti_SSL example
Starting WebClientMulti_SSL on ESP32_DEV with ETH_PHY_LAN8720
WebServer_WT32_ETH01 v1.5.1 for core v2.0.0
ETH MAC: A8:03:2A:A1:61:73, IPv4: 192.168.2.232, FULL_DUPLEX, 100Mbps
Waiting for NTP time sync: .
Current time: Tue Jul 6 19:58:27 2021
Connecting to www.arduino.cc...
Took: 2312
HTTP/1.1 200 OK
Date: Tue, 06 Jul 2021 19:58:31 GMT
Content-Type: text/plain
Transfer-Encoding: chunked
Connection: close
Last-Modified: Wed, 02 Oct 2013 13:46:47 GMT
Vary: Accept-Encoding
Strict-Transport-Security: max-age=500; includeSubDomains
X-Content-Type-Options: nosniff
X-XSS-Protection: 1; mode=block
CF-Cache-Status: DYNAMIC
Expect-CT: max-age=604800, report-uri="https://report-uri.cloudflare.com/cdn-cgi/beacon/expect-ct"
Server: cloudflare
CF-RAY: 66ab6888bbc63fd9-YYZ
alt-svc: h3-27=":443"; ma=86400, h3-28=":443"; ma=86400, h3-29=":443"; ma=86400, h3=":443"; ma=86400
8d7
`:;;;,` .:;;:.
.;;;;;;;;;;;` :;;;;;;;;;;: TM
`;;;;;;;;;;;;;;;` :;;;;;;;;;;;;;;;
:;;;;;;;;;;;;;;;;;; `;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;; .;;;;;;;;;;;;;;;;;;;;
;;;;;;;;:` `;;;;;;;;; ,;;;;;;;;.` .;;;;;;;;
.;;;;;;, :;;;;;;; .;;;;;;; ;;;;;;;
;;;;;; ;;;;;;; ;;;;;;, ;;;;;;.
,;;;;; ;;;;;;.;;;;;;` ;;;;;;
;;;;;. ;;;;;;;;;;;` ``` ;;;;;`
;;;;; ;;;;;;;;;, ;;; .;;;;;
`;;;;: `;;;;;;;; ;;; ;;;;;
,;;;;` `,,,,,,,, ;;;;;;; .,,;;;,,, ;;;;;
:;;;;` .;;;;;;;; ;;;;;, :;;;;;;;; ;;;;;
:;;;;` .;;;;;;;; `;;;;;; :;;;;;;;; ;;;;;
.;;;;. ;;;;;;;. ;;; ;;;;;
;;;;; ;;;;;;;;; ;;; ;;;;;
;;;;; .;;;;;;;;;; ;;; ;;;;;,
;;;;;; `;;;;;;;;;;;; ;;;;;
`;;;;;, .;;;;;; ;;;;;;; ;;;;;;
;;;;;;: :;;;;;;. ;;;;;;; ;;;;;;
;;;;;;;` .;;;;;;;, ;;;;;;;; ;;;;;;;:
;;;;;;;;;:,:;;;;;;;;;: ;;;;;;;;;;:,;;;;;;;;;;
`;;;;;;;;;;;;;;;;;;;. ;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;; :;;;;;;;;;;;;;;;;:
,;;;;;;;;;;;;;, ;;;;;;;;;;;;;;
.;;;;;;;;;` ,;;;;;;;;:
;;; ;;;;;` ;;;;: .;; ;; ,;;;;;, ;;. `;, ;;;;
;;; ;;:;;; ;;;;;; .;; ;; ,;;;;;: ;;; `;, ;;;:;;
,;:; ;; ;; ;; ;; .;; ;; ,;, ;;;,`;, ;; ;;
;; ;: ;; ;; ;; ;; .;; ;; ,;, ;;;;`;, ;; ;;.
;: ;; ;;;;;: ;; ;; .;; ;; ,;, ;;`;;;, ;; ;;`
,;;;;; ;;`;; ;; ;; .;; ;; ,;, ;; ;;;, ;; ;;
;; ,;, ;; .;; ;;;;;: ;;;;;: ,;;;;;: ;; ;;, ;;;;;;
;; ;; ;; ;;` ;;;;. `;;;: ,;;;;;, ;; ;;, ;;;;
0
LoopCount 1, Received 2876 bytes
Disconnecting.
Connecting to www.cloudflare.com...
Took: 2249
HTTP/1.1 200 OK
Date: Tue, 06 Jul 2021 19:58:54 GMT
Content-Type: text/plain
Transfer-Encoding: chunked
Connection: close
Access-Control-Allow-Origin: *
Server: cloudflare
CF-RAY: 66ab6913cedb3ff1-YYZ
X-Frame-Options: DENY
X-Content-Type-Options: nosniff
Expires: Thu, 01 Jan 1970 00:00:01 GMT
Cache-Control: no-cache
ba
fl=29f93
h=www.cloudflare.com
ip=45.72.193.56
ts=1625601534.066
visit_scheme=https
uag=SSLClientOverEthernet
colo=YYZ
http=http/1.1
loc=CA
tls=TLSv1.2
sni=plaintext
warp=off
gateway=off
0
LoopCount 2, Received 529 bytes
Disconnecting.
The terminal output of WT32_ETH01 running MQTTClient_SSL_Complex example
Starting MQTTClient_SSL_Complex on ESP32_DEV with ETH_PHY_LAN8720
WebServer_WT32_ETH01 v1.5.1 for core v2.0.0
ETH MAC: A8:03:2A:A1:61:73, IPv4: 192.168.2.232, FULL_DUPLEX, 100Mbps
Waiting for NTP time sync: .
Current time: Tue Jul 6 18:14:02 2021
Attempting MQTT connection to broker.emqx.io...connected
Message Send : MQTT_Pub => Hello from MQTTClient_SSL_Complex on WT32-ETH01, millis = 5718
Message arrived [MQTT_Pub] Hello from MQTTClient_SSL_Complex on WT32-ETH01, millis = 5718
Message Send : MQTT_Pub => Hello from MQTTClient_SSL_Complex on WT32-ETH01, millis = 10719
Message arrived [MQTT_Pub] Hello from MQTTClient_SSL_Complex on WT32-ETH01, millis = 10719
The terminal output of WT32_ETH01 running MQTTS_ThingStream example
Starting MQTTS_ThingStream on ESP32_DEV with ETH_PHY_LAN8720
WebServer_WT32_ETH01 v1.5.1 for core v2.0.0
ETH MAC: A8:03:2A:A1:61:73, IPv4: 192.168.2.232, FULL_DUPLEX, 100Mbps
Waiting for NTP time sync: .
Current time: Tue Jul 6 18:38:22 2021
***************************************
esp32-sniffer/12345678/ble
***************************************
Attempting MQTT connection to mqtt.thingstream.io
...connected
Published connection message successfully!
Subscribed to: esp32-sniffer/12345678/ble
MQTT Message Send : esp32-sniffer/12345678/ble => Hello from MQTTS_ThingStream on WT32-ETH01 with ETH_PHY_LAN8720
MQTT Message receive [esp32-sniffer/12345678/ble] Hello from MQTTS_ThingStream on WT32-ETH01 with ETH_PHY_LAN8720
MQTT Message Send : esp32-sniffer/12345678/ble => Hello from MQTTS_ThingStream on WT32-ETH01 with ETH_PHY_LAN8720
MQTT Message receive [esp32-sniffer/12345678/ble] Hello from MQTTS_ThingStream on WT32-ETH01 with ETH_PHY_LAN8720
The terminal output of WT32_ETH01 running MQTTClient_SSL example
Starting MQTTClient_SSL on ESP32_DEV with ETH_PHY_LAN8720
WebServer_WT32_ETH01 v1.5.1 for core v2.0.0
ETH MAC: A8:03:2A:A1:61:73, IPv4: 192.168.2.232, FULL_DUPLEX, 100Mbps
Waiting for NTP time sync: .
Current time: Tue Jul 6 17:11:00 2021
Attempting MQTTS connection to broker.emqx.io...connected
Message Send : MQTT_Pub => Hello from MQTTClient_SSL on WT32-ETH01
Message arrived [MQTT_Pub] Hello from MQTTClient_SSL on WT32-ETH01
Message Send : MQTT_Pub => Hello from MQTTClient_SSL on WT32-ETH01
Message arrived [MQTT_Pub] Hello from MQTTClient_SSL on WT32-ETH01
Message Send : MQTT_Pub => Hello from MQTTClient_SSL on WT32-ETH01
Message arrived [MQTT_Pub] Hello from MQTTClient_SSL on WT32-ETH01
Message Send : MQTT_Pub => Hello from MQTTClient_SSL on WT32-ETH01
Message arrived [MQTT_Pub] Hello from MQTTClient_SSL on WT32-ETH01
Message Send : MQTT_Pub => Hello from MQTTClient_SSL on WT32-ETH01
Message arrived [MQTT_Pub] Hello from MQTTClient_SSL on WT32-ETH01
The terminal output of WT32_ETH01 running MQTTClient_SSL_Auth example
Starting MQTTClient_SSL_Auth on ESP32_DEV with ETH_PHY_LAN8720
WebServer_WT32_ETH01 v1.5.1 for core v2.0.0
ETH MAC: A8:03:2A:A1:61:73, IPv4: 192.168.2.232, FULL_DUPLEX, 100Mbps
Waiting for NTP time sync: .
Current time: Tue Jul 6 18:05:14 2021
Attempting MQTTS connection to broker.emqx.io...connected
Message Send : MQTT_Pub => Hello from MQTTClient_SSL_Auth on WT32-ETH01
Message arrived [MQTT_Pub] Hello from MQTTClient_SSL_Auth on WT32-ETH01
Message Send : MQTT_Pub => Hello from MQTTClient_SSL_Auth on WT32-ETH01
Message arrived [MQTT_Pub] Hello from MQTTClient_SSL_Auth on WT32-ETH01
Message Send : MQTT_Pub => Hello from MQTTClient_SSL_Auth on WT32-ETH01
Message arrived [MQTT_Pub] Hello from MQTTClient_SSL_Auth on WT32-ETH01
Message Send : MQTT_Pub => Hello from MQTTClient_SSL_Auth on WT32-ETH01
Message arrived [MQTT_Pub] Hello from MQTTClient_SSL_Auth on WT32-ETH01
Message Send : MQTT_Pub => Hello from MQTTClient_SSL_Auth on WT32-ETH01
Message arrived [MQTT_Pub] Hello from MQTTClient_SSL_Auth on WT32-ETH01
Debug is enabled by default on Serial. Debug Level from 0 to 4. To disable, change the ETHERNET_WEBSERVER_LOGLEVEL to 0
// Use this to output debug msgs to Serial
#define DEBUG_ETHERNET_WEBSERVER_PORT Serial
// Use this to disable all output debug msgs
// Debug Level from 0 to 4
#define _ETHERNET_WEBSERVER_LOGLEVEL_ 0
If you get compilation errors, more often than not, you may need to install a newer version of the board's core, applying Libraries' Patches, Packages' Patches or this library latest version.
Submit issues to: WebServer_WT32_ETH01 issues
- Bug Searching and Killing
- Add support to ESP32-based WT32_ETH01 using LAN8720 Ethernet
- Add SSL support
- Add HTTPS and MQTTS examples
- Support breaking ESP32 core v2.0.0 as well as v1.0.6-
- Auto detect ESP32 core v1.0.6- or v2.0.0 to use correct settings
- Fix
multiple-definitions
linker error. - Add example multiFileProject to demo for multiple-file project
- Add example MQTT_And_OTA_Ethernet to demo how to use OTA
- Fix compile error for examples serveStatic and serveStaticLoadFile to use built-in LittleFS library for new ESP32 cores
- Fix compile error for examples ESP32_FS_EthernetWebServer if WT32_ETH01 is selected as A0 (and many pins) not defined in new ESP32 cores
Many thanks for everyone for bug reporting, new feature suggesting, testing and contributing to the development of this library.
- Based on the Ivan Grokhotkov's ESP32 WebServer and HTTPClient Library libraries.
- Thanks to Sardar Azari to make PR in streamFile and serveStatic for ESP8266/ESP32 boards #22 to add WebServer feature to serve static from LittleFS/SPIFFS for ESP32. The example serveStatic and serveStaticLoadFile are also contributed by Sardar Azari
- Thanks to DSikes to make PR in Added MQTT and OTA over Ethernet example to examples folder #9 to add OTA feature, leading to v1.5.1
⭐️ Ivan Grokhotkov |
Sardar Azari |
DSikes |
If you want to contribute to this project:
- Report bugs and errors
- Ask for enhancements
- Create issues and pull requests
- Tell other people about this library
- The library is licensed under GPLv3
Copyright (c) 2021- Khoi Hoang