Arm Cortex-M development and debugging environment inside a VSCode devcontainer.

• Microsoft .NET 6.0 Runtime Version 6.0.36
• Arm GNU Toolchain Version 13.3rel1
• SEGGER J-Link Software Version 8.10k
• xPack OpenOCD Version 0.12.0-4
• CMake Version 3.31.2

• VSCode Dev Containers extension
• usbipd-win (Windows and WSL parts installed!)

• Include this repo as .devcontainer in the root of your project
• Connect debug probe
• Select Dev Containers: Reopen in Container

For CMake projects:

• Upon prompt, select the GCC x.x arm-none-eabi CMake Kit.
  • Alternatively, a toolchain definition file is provided in: $CMAKE_CONFIGS_PATH/gcc-arm-none-eabi.cmake.
• Run CMake: Configure
• Build using CMake: Build [F7]

Upon first run, an error message may appear in Line 1, Column 1. Try re-running CMake configuration, or run a build. If the file is a .h header file, it needs to be #include'd into a C module.

In order to use SEGGER and OpenOCD debug probes within the container, some udev rules need to be installed on the host machine. A setup script has been provided to aid with installation.

• Run setup-devcontainer inside the container

• Close the container, and re-open the work directory on your host

• Run the install-rules script inside .vscode/setup/ on your host machine

  cd .vscode/setup
  sudo ./install-rules
  

To access a serial port inside the devcontainer, use the cu command as shown below:

cu -l <serial port device> -s <baudrate>

e.g. "cu -l /dev/ttyACM0 -s 115200".

To close the connection, press RETURN/ESC/Ctrl-C, type "~." (tilde, dot) and wait for 3 seconds.

If not stated otherwise, the contents of this project are licensed under The MIT License. The full license text is provided in the LICENSE file.

SPDX-License-Identifier: MIT