When uploading a image within the .wiki/lib directory append the below URL in front of the image name within the lib dir to link against the image within this repo or wherever 🌈 else.

https://raw.githubusercontent.com/wiki/ipatch/theairportwiki/lib/

When working with Apple Time Capsule disks for a modern GNU Linux distro, ie. Arch the below command will help mount the disk using CIFS

echo "mount the tc disk"
sudo -E mount.cifs //[tc.IP]/[PATH] [/local/path] -o "pass=[TC.DISK.PASSWORD],sec=ntlm,vers=1.0,file_mode=0777,dir_mode=0777,username=[$USER],uid=1000,gid=985"
echo "copy cmd"
rsync -a --no-o --no-g -h --info=progress2 -P /local/disk.qcow2 /local/path/

Note, I'm averaging about 10MB/s using rsynce to copy a large ~ 60GB qcow file across a network using a macbook with a gigabit to thunderbolt adapter, and writing the file to a SSD disk i installed in the time capsule.

Not exactly sure where the bottleneck on the network is arising, but my hunch makes me think write performance of the disk or server software running on the TC. (will test on a separate server in the future).

to mount a time capsule shared disk using cifs as afp is being deprecated

sudo -E \ 
mount -t cifs //10.0.1.1/Data /mnt/tc \ 
-o "pass=$TC_PASSWORD,sec=ntlm,vers=1.0,file_mode=0644,dir_mode=0777,username=$USER,uid=1000,gid=985,serverino,cache=loose,mapposix,rsize=1048576,wsize=1048576,mfsymlinks"

the above is useful for navigating POSIX style symlinks throughout the filesystem

went to down a bit of a rabbit hole today messing around with the smbclient cmd on my arch linux box, trying to connect to my time capsule using smbclient. i can obviously connect to it and mount with the above mentioned commands, but wanted to connect to it using smbclient just for the understanding of it.

echo "first if ip address or server name is uknown use nmap to find the ip address"
nmap -sT "10.0.1.*"; echo "obviously searching on a LAN, and knowing that the ip range is in the "10.0.1.x"

# output
Nmap scan report for 10.0.1.1

139/tcp   open  netbios-ssn
445/tcp   open  microsoft-ds

nmblookup -A 10.0.1.1
Looking up status of 10.0.1.1
        SNOWBRICK       <00> -         B <ACTIVE> <PERMANENT>
        WORKGROUP       <00> - <GROUP> B <ACTIVE> <PERMANENT>
        SNOWBRICK       <20> -         B <ACTIVE> <PERMANENT>

        MAC Address = 44444444444444444

then try and connect to the smb server, (unfortunately my apple time capsule only supports samba server version 1)

smbclient -L 10.0.1.1

# output
protocol negotiation failed: NT_STATUS_INVALID_NETWORK_RESPONSE

smbclient -L \\SNOWBRICK

⚠️ since the apple time capsule is running netbsd v4.0 and such an old version of the samba server certain options will need to be set in order to interact with the server

smbclient \
//SNOWBRICK/Data --option='client min protocol=nt1' --option='client use spnego=no' \
--password $TCPASSWORD

i got the same results using all the servernames

smbclient //snowbrick
smbclient //SNOWBRICK
smbclient //10.0.1.1

to avoid having to type the two options --option='client min protocol=nt1' --option='client use spnego=no everytime using the smbclient cmd add the below line to /etc/samba/smb.conf

# smb.conf
[global]
client use spnego=no
client use min protocol=nt1

🔥🔥🔥🔥

smbclient //snowbrick/data --password $TCPASSWORD