- Introduction
- Centmin Mod 123.09beta01 LEMP Stack Install
- Magento 2.2.2 Installation
- Magento 2 Upgrade
- Magento 2 Page Speed Tests
- Magento 2 Redis Benchmarks
- Magento 2 Varnish Cache Config & Benchmarks
- Magento 2 Backups
- Magento 2 Install And Remove Sample Data
- Magento Docs & Info Links
- Magento 2 Bugs
This Magento 2.2.2 installation guide is written by George Liu (eva2000) and is provided as is without any support and was written specifically for Magento 2.2.2 installs on Centmin Mod 123.09beta01 or higher branch LEMP stack installations running Nginx 1.13 branch with PHP-FPM 7.1.x latest (Magento 2.2.2 doesn't support PHP 7.2 yet) and MariaDB 10.1.31 MySQL server. Magento 2.2.2 install below will be via Composer download and native Magento binary command tool and is 100% pure SSH command line install. FTP/SFTP is not used at all. The below Magento install steps could be used to write an automated script to install Magento 2.2.2 on Centmin Mod LEMP stacks purely from SSH command line. Maybe something planned on offer to Centmin Mod Premium Members. Update: added a Magento 2 Bugs section of which one bug already affects Magento 2.2.2 causing high MySQL / PHP related loads.
Disclaimer:
I have never used Magento before so this is first attempt at installing Magento 2.2.2 after a quick read of the official Magento 2.2.2 documentation and Magento related info links outlined below in Magento Docs & Info Links section. I haven't gone beyond the initial Magento installation, so have no experience with managing and administrating Magento 2.2 application nor have I have any experience with Magento themes etc. It's purely a first time attempt outline for Magento 2.2.2. Hence, why I decided to setup this Magento install guide on a Github repository instead of the official Centmin Mod Community forums so I can accept contributions and corrections to the below guide via Git pull requests. This is how I usually learn - lots of reading and practice. Just this time I am documenting publicly. Thus this write up guide will undergo revisions over time.
All below installation steps assume you have thoroughly read those listed official Magento 2.2.2 documentation and links. So if you do not understand any of the SSH commands used, start reading the listed documentation and links below.
Github Repository
First you need to install Centmin Mod 123.09beta01 LEMP stack on a fresh virgin CentOS 7.4 64bit server using the betainstaller71.sh
installer which will install Nginx 1.13 branch with MariaDB 10.1.31 MySQL and latest version of PHP 7.1.x branch as PHP-FPM which as of this moment is PHP 7.1.15. Details are here. You need at least 2GB of memory according to official Magento 2.2 stack requirements.
For CentOS users, you want to make sure you're using latest CentOS 7.4 or higher version operating system as the version of Git and Curl are latest versions used to support TLS v1.2 which is required due to Github.com deprecating TLSv1.0 and TLSv1.1 and Paypal deprecating TLSv1.0. Magento component repository also requires TLSv1.1 or newer too.
As root user in SSH session run the installer via curl:
yum -y update; curl -O https://centminmod.com/betainstaller71.sh && chmod 0700 betainstaller71.sh && bash betainstaller71.sh
Install times vary depending on the server hardware specs, resources available and speed of server i.e. more cpu cores and higher cpu clock speed = faster install times. You can check out other Centmin Mod users' posted install times here.
After install it is highly recommended to bookmark and read at least these 3 links:
- Getting Started Guide
- How to Boost Centmin Mod LEMP Stack Performance
- Guide To Learning About Centmin Mod
Centmin Mod LEMP stack installer takes care of all possible PHP extension requirements for many web applications including, Wordpress, Xenforo, Invision Board, vBulletin, Piwik, and Magento.
List of PHP extensions loaded with PHP 7.1.5 with lzf and lz4 added post initial install
php -m
[PHP Modules]
bcmath
bz2
calendar
Core
ctype
curl
date
dom
enchant
exif
filter
ftp
gd
geoip
gettext
gmp
hash
iconv
igbinary
imagick
imap
intl
json
ldap
libxml
lz4
lzf
mailparse
mbstring
mcrypt
memcache
memcached
mysqli
mysqlnd
openssl
pcntl
pcre
PDO
pdo_mysql
pdo_sqlite
Phar
posix
pspell
readline
redis
Reflection
session
shmop
SimpleXML
snmp
soap
sockets
SPL
sqlite3
standard
sysvmsg
sysvsem
sysvshm
tidy
tokenizer
xml
xmlreader
xmlrpc
xmlwriter
xsl
Zend OPcache
zip
zlib
[Zend Modules]
Zend OPcache
After install, you may want to tweak your PHP-FPM primary main pool settings in /usr/local/etc/php-fpm.conf
If you're on non-OpenVZ based server with ability to run system at TCP /etc/sysctl.conf level, then Centmin Mod LEMP stack installer would have automatically optimised your system at TCP level. So you will be able to make changes like below:
Raise PHP-FPM listen.backlog
listen.backlog = 8096
change from ondemand
to static
or dynamic
PHP-FPM process manager in which case tuning pm.max_children
is left up to you to tune. Note, Centmin Mod LEMP stack install auto tunes these default values on a server based on detected system resources like cpu count and memory, so below settings may not be the same on your Centmin Mod LEMP based server as you may have different server hardware resources and hardware specs.
;pm = ondemand
pm = static
pm.max_children = 8
; Default Value: min_spare_servers (max_spare_servers - min_spare_servers) / 2
pm.start_servers = 8
pm.min_spare_servers = 4
pm.max_spare_servers = 12
pm.max_requests = 1000
Official php.net documentation here.
pm string
Choose how the process manager will control the number of child processes. Possible values: static, ondemand, dynamic. This option is mandatory.
static - the number of child processes is fixed (pm.max_children).
ondemand - the processes spawn on demand (when requested, as opposed to dynamic, where pm.start_servers are started when the service is started.
dynamic - the number of child processes is set dynamically based on the following directives: pm.max_children, pm.start_servers, pm.min_spare_servers, pm.max_spare_servers.
pm.max_children int
The number of child processes to be created when pm is set to static and the maximum number of child processes to be created when pm is set to dynamic. This option is mandatory.
This option sets the limit on the number of simultaneous requests that will be served. Equivalent to the ApacheMaxClients directive with mpm_prefork and to the PHP_FCGI_CHILDREN environment variable in the original PHP FastCGI.
pm.start_servers int
The number of child processes created on startup. Used only when pm is set to dynamic. Default Value: min_spare_servers (max_spare_servers - min_spare_servers) / 2.
pm.min_spare_servers int
The desired minimum number of idle server processes. Used only when pm is set to dynamic. Also mandatory in this case.
pm.max_spare_servers int
The desired maximum number of idle server processes. Used only when pm is set to dynamic. Also mandatory in this case.
pm.process_idle_timeout mixed
The number of seconds after which an idle process will be killed. Used only when pm is set to ondemand. Available units: s(econds)(default), m(inutes), h(ours), or d(ays). Default value: 10s.
pm.max_requests int
The number of requests each child process should execute before respawning. This can be useful to work around memory leaks in 3rd party libraries. For endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS. Default value: 0.
Magento 2.2.2 install is done purely via SSH command line and the test KVM VPS server is of following specs which meet the official Magento 2.2 stack requirements.
- 4 CPU Intel 2.40Ghz cpu
- 4GB memory
- 80GB disk
- CentOS 7.4 64bit
- Centmin Mod 123.09beta01 installed via betainstaller71.sh
- Nginx 1.13.9
- PHP-FPM 7.1.15 Zend Opcache
- MariaDB 10.1.31 MySQL Server
- CSF Firewall
The cpu is very old as it doesn't have SSE4.2 which was added back in Intel Nehalem architecture back in 2008 - making this cpu at least 10 yrs old.
lscpu
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
CPU(s): 4
On-line CPU(s) list: 0-3
Thread(s) per core: 1
Core(s) per socket: 1
Socket(s): 4
NUMA node(s): 1
Vendor ID: GenuineIntel
CPU family: 6
Model: 13
Model name: QEMU Virtual CPU version 1.5.3
Stepping: 3
CPU MHz: 2499.998
BogoMIPS: 4999.99
Hypervisor vendor: KVM
Virtualization type: full
L1d cache: 32K
L1i cache: 32K
L2 cache: 4096K
NUMA node0 CPU(s): 0-3
Flags: fpu de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pse36 clflush mmx fxsr sse sse2 syscall nx lm rep_good nopl pni cx16 hypervisor lahf_lm
To install Magento via Composer, you need to register an account to get the Authentication Keys from Magento Markplace and log in and go to Account Profile, Market Place tab and Access Keys to generate a set of Authentictaion Keys. In step 2 next, you will use the public key to assign to SSH variable magentouser_key
and private key to assign to SSH variable magentouser_pass
.
magentouser_key=yourmagento_authention_publickey
magentouser_pass=yourmagento_authention_privatekey
curl -sS https://getcomposer.org/installer | php
mv -f composer.phar /usr/local/bin/composer
composer config -g repositories.magento '{ "type": "composer", "url": "https://repo.magento.com/" }'
composer config -g http-basic.repo.magento.com $magentouser_key $magentouser_pass
n98-magerun2 install https://github.com/netz98/n98-magerun2
wget -O /usr/local/bin/n98-magerun2 https://files.magerun.net/n98-magerun2.phar
chmod x /usr/local/bin/n98-magerun2
wget -O /etc/bash_completion.d/n98-magerun2.phar.bash https://github.com/netz98/n98-magerun2/raw/develop/res/autocompletion/bash/n98-magerun2.phar.bash
Redis server is installed from Remi YUM repository using custom Redis installer written for Centmin Mod LEMP stacks and implements the basic Redis server install steps outlined here.
mkdir -p /root/tools
cd /root/tools
git clone https://github.com/centminmod/centminmod-redis
cd centminmod-redis
if [ ! -f /usr/bin/redis-server ]; then ./redis-install.sh install; fi
service redis restart
Modifying /etc/redis.conf config with
maxmemory 512mb
maxmemory-policy allkeys-lru
maxmemory-samples 10
appendonly yes
If you are only using redis server for caching and not persistent storage in any web apps on server also comment out and disable snapshotting altogther
#save 900 1
#save 300 10
#save 60 10000
You can also remove the Redis TCP overhead in /etc/redis.conf by also enabling unix socket mode while keep TCP ports for Redis enabled too. Below setups up unixsocket at /var/run/redis/redis.sock
# Specify the path for the Unix socket that will be used to listen for
# incoming connections. There is no default, so Redis will not listen
# on a unix socket when not specified.
#
unixsocket /var/run/redis/redis.sock
unixsocketperm 777
restart redis server
service redis restart
check redis server info via unixsocket
redis-cli -s /var/run/redis/redis.sock info server
# Server
redis_version:4.0.8
redis_git_sha1:00000000
redis_git_dirty:0
redis_build_id:32fcc4a764b07c42
redis_mode:standalone
os:Linux 3.10.0-229.el7.x86_64 x86_64
arch_bits:64
multiplexing_api:epoll
atomicvar_api:atomic-builtin
gcc_version:4.8.5
process_id:1618
run_id:21de92709a7ed5f299425ddeb1bf0dd5a7399331
tcp_port:6379
uptime_in_seconds:139
uptime_in_days:0
hz:10
lru_clock:10971220
executable:/usr/bin/redis-server
config_file:/etc/redis.conf
Need to install newer version of lz4 1.8.2 instead of YUM provided 1.7.3 and install lzf and lz4 PHP extensions.
cd /svr-setup || cd /usr/src ; rm -rf lz4;
git clone --depth=1 https://github.com/lz4/lz4;
cd lz4; make clean; if [ -f /opt/rh/devtoolset-7/enable ]; then source /opt/rh/devtoolset-7/enable; fi
make -j$(nproc);
make install;
lz4 --help;
Installing lz4 PHP extension - you may need to reinstall this if you upgrade PHP to major branch i.e. from PHP 7.1.x to 7.2.x
cd /svr-setup;
git clone --recursive --depth=1 https://github.com/kjdev/php-ext-lz4.git;
cd php-ext-lz4;
make clean;
phpize;
./configure --with-php-config=/usr/local/bin/php-config;
make -j$(nproc);
make install;
PHPEXTDIRD=$(cat /usr/local/bin/php-config | awk '/^extension_dir/ {extdir=$1} END {gsub(/\047|extension_dir|=|)/,"",extdir); print extdir}');
echo "extension=${PHPEXTDIRD}/lz4.so" > /etc/centminmod/php.d/lz4.ini;
fpmrestart
php --ri lz4
Installing lzf PHP extension - you may need to reinstall this if you upgrade PHP to major branch i.e. from PHP 7.1.x to 7.2.x
cd /svr-setup;
wget https://pecl.php.net/get/LZF-1.6.6.tgz;
tar vzxf LZF-1.6.6.tgz;
cd LZF-1.6.6;
make clean;
phpize;
./configure --with-php-config=/usr/local/bin/php-config;
make -j$(nproc);
make install;
PHPEXTDIRD=$(cat /usr/local/bin/php-config | awk '/^extension_dir/ {extdir=$1} END {gsub(/\047|extension_dir|=|)/,"",extdir); print extdir}');
echo "extension=${PHPEXTDIRD}/lzf.so" > /etc/centminmod/php.d/lzf.ini;
fpmrestart
php --ri lzf
- magento recommends that opcache.enable_cli=1 is enabled
- tune and edit custom php.ini settings via custom separate individual .ini settings files outlined at https://centminmod.com/phpfpm.html
- create custom .ini settings file at /etc/centminmod/php.d/zzz-zendopcache.ini which overrides default /etc/centminmod/php.d/zendopcache.ini
- allocate 512MB of memory to Zend Opcache but don't set opcache.validate_timestamps=0 and leave at default opcache.validate_timestamps=1
- raise opcache.max_accelerated_files to 100,000
- set memory_limit to 1024MB
echo -e "memory_limit=1024M\nopcache.max_accelerated_files=100000\nopcache.memory_consumption=512\nopcache.enable_cli=1\nsession.gc_maxlifetime=86400" > /etc/centminmod/php.d/zzz-zendopcache.ini
fpmrestart
php --ini
php --ri "Zend Opcache"
php --ri session
check memory_limit which shows local and global values
php -i | grep memory_limit
memory_limit => 1024M => 1024M
check Zend Opcache settings
php --ri "Zend Opcache"
Zend OPcache
Opcode Caching => Up and Running
Optimization => Enabled
SHM Cache => Enabled
File Cache => Disabled
Startup => OK
Shared memory model => mmap
Cache hits => 0
Cache misses => 0
Used memory => 25161376
Free memory => 511709536
Wasted memory => 0
Interned Strings Used memory => 413712
Interned Strings Free memory => 7974896
Cached scripts => 0
Cached keys => 0
Max keys => 130987
OOM restarts => 0
Hash keys restarts => 0
Manual restarts => 0
Directive => Local Value => Master Value
opcache.enable => On => On
opcache.use_cwd => On => On
opcache.validate_timestamps => On => On
opcache.validate_permission => Off => Off
opcache.validate_root => Off => Off
opcache.inherited_hack => On => On
opcache.dups_fix => Off => Off
opcache.revalidate_path => Off => Off
opcache.log_verbosity_level => 1 => 1
opcache.memory_consumption => 512 => 512
opcache.interned_strings_buffer => 8 => 8
opcache.max_accelerated_files => 100000 => 100000
opcache.max_wasted_percentage => 5 => 5
opcache.consistency_checks => 0 => 0
opcache.force_restart_timeout => 180 => 180
opcache.revalidate_freq => 180 => 180
opcache.file_update_protection => 2 => 2
opcache.preferred_memory_model => no value => no value
opcache.blacklist_filename => no value => no value
opcache.max_file_size => 0 => 0
opcache.protect_memory => 0 => 0
opcache.save_comments => 1 => 1
opcache.fast_shutdown => 0 => 0
opcache.optimization_level => 0x7FFFBFFF => 0x7FFFBFFF
opcache.opt_debug_level => 0 => 0
opcache.enable_file_override => On => On
opcache.enable_cli => On => On
opcache.error_log => no value => no value
opcache.restrict_api => no value => no value
opcache.lockfile_path => /tmp => /tmp
opcache.file_cache => no value => no value
opcache.file_cache_only => 0 => 0
opcache.file_cache_consistency_checks => 1 => 1
opcache.huge_code_pages => Off => Off
Below steps will download Magento 2.2.2 via Composer and use Magento native bin/magento
binary to install Magento 2.2.2 on Centmin Mod LEMP stack based CentOS 7.4 64bit server enabling the following optimisations:
- Install Redis 4.0.8 server
- Install n98-magerun2 command line too
- Install lzf and lz4 PHP extensions
- Install Magento 2.2.2 with randomised backend Admin url address
- Enable Magento 2 default, full page cache and session caching using Redis caching with full page cache and session caching using faster lz4 compression type instead of default gzip type
- Flat based catalogue product and categories
- Async indexing
- Async sending of sales emails
- magento_umask set to 022
- Create Centmin Mod Nginx HTTP/2 HTTPS based vhost site with Magento 2 nginx configuration rules modified for Centmin Mod Nginx structured layout
First use nv
command outlined here to create a Centmin Mod Nginx HTTP/2 HTTPS vhost site with a new magento2
system user and default vhostname='magento.domain.com'
variable in SSH session which will be referenced in below steps as $vhostname
variable.
# setup centmin mod nginx http/2 https vhost site
vhostname='magento.domain.com'
adduser magento2
adduser_pass="$(pwgen -1cnys 34)"
echo "magento2 user pass: $adduser_pass"
echo "$adduser_pass" | passwd magento2 --stdin
usermod -a -G nginx magento2
id magento2
groups magento2
echo "$(curl -4s ipinfo.io/ip) $vhostname" >> /etc/hosts
For Nginx vhost setup via nv
command using self-signed SSL certificate based HTTP/2 HTTPS:
nv -d $vhostname -s y -u "ftpu$(pwgen -1cnys 31)"
Or instead use free Letsencrypt SSL certificate via nv
command using Centmin Mod addons/acmetool.sh integration script. Just make sure that your default vhostname='magento.domain.com'
variable domain i.e. magento.domain.com
has a valid and propagated DNS A record pointing to the Centmin Mod LEMP server's primary IP address. If you are using a non-subdomain name, make sure both non-www and www version of the name both have valid and propagated DNS A records pointing to the Centmin Mod LEMP server's primary IP address BEFORE you run the below nv
command to automatically create a Centmin Mod Nginx HTTP/2 HTTPS vhost site and obtain a free Letsencrypt SSL certificate. The valid DNS A records are need for Letsencrypt domain validation purposes.
echo "LETSENCRYPT_DETECT='y'" >> /etc/centminmod/custom_config.inc
nv -d $vhostname -s lelive -u "ftpu$(pwgen -1cnys 31)"
Change into magento.domain.com
vhost directory one level above the usual web root at public
, which is /home/nginx/domains/$vhostname
and move and make a backup copy of the original web root as public.orig
directory. Then use Composer to download the Magento 2.2.2 source code to a newly created public
directory and set the appropriate user/group owner permissions on files, directories and the Magento binary.
Update: Magento 2.2.3 is latest now so you would change magento/project-community-edition=2.2.2
to magento/project-community-edition=2.2.3
instead.
# downloading magento 2.2 code via composer
cd /home/nginx/domains/$vhostname
mv public public.orig
time composer create-project --repository-url=https://repo.magento.com/ magento/project-community-edition=2.2.3 public
time composer require predis/predis
#time composer require ext-phpiredis
cd public
time find var generated vendor pub/static pub/media app/etc -type f -exec chmod u w {} \;
time find var vendor generated pub/static pub/media app/etc -type d -exec chmod u w {} \;
chown -R nginx:nginx "/home/nginx/domains/${vhostname}/public"
chmod u x bin/magento
Now the actual Magento 2.2.2 installing via SSH command line using the Magento binary $WEBROOT/bin/magento
where WEBROOT
variable and other installation settings are setup in SSH session variables outlined below. Adjust the variables values as needed.
You can use $WEBROOT/bin/magento list
command to see all available command options.
php $WEBROOT/bin/magento list
Magento CLI version 2.2.2
Usage:
command [options] [arguments]
Options:
-h, --help Display this help message
-q, --quiet Do not output any message
-V, --version Display this application version
--ansi Force ANSI output
--no-ansi Disable ANSI output
-n, --no-interaction Do not ask any interactive question
-v|vv|vvv, --verbose Increase the verbosity of messages: 1 for normal output, 2 for more verbose output and 3 for debug
Available commands:
help Displays help for a command
list Lists commands
admin
admin:user:create Creates an administrator
admin:user:unlock Unlock Admin Account
app
app:config:dump Create dump of application
app:config:import Import data from shared configuration files to appropriate data storage
cache
cache:clean Cleans cache type(s)
cache:disable Disables cache type(s)
cache:enable Enables cache type(s)
cache:flush Flushes cache storage used by cache type(s)
cache:status Checks cache status
catalog
catalog:images:resize Creates resized product images
catalog:product:attributes:cleanup Removes unused product attributes.
config
config:sensitive:set Set sensitive configuration values
config:set Change system configuration
config:show Shows configuration value for given path. If path is not specified, all saved values will be shown
cron
cron:install Generates and installs crontab for current user
cron:remove Removes tasks from crontab
cron:run Runs jobs by schedule
customer
customer:hash:upgrade Upgrade customer's hash according to the latest algorithm
deploy
deploy:mode:set Set application mode.
deploy:mode:show Displays current application mode.
dev
dev:di:info Provides information on Dependency Injection configuration for the Command.
dev:query-log:disable Disable DB query logging
dev:query-log:enable Enable DB query logging
dev:source-theme:deploy Collects and publishes source files for theme.
dev:template-hints:disable Disable frontend template hints. A cache flush might be required.
dev:template-hints:enable Enable frontend template hints. A cache flush might be required.
dev:tests:run Runs tests
dev:urn-catalog:generate Generates the catalog of URNs to *.xsd mappings for the IDE to highlight xml.
dev:xml:convert Converts XML file using XSL style sheets
i18n
i18n:collect-phrases Discovers phrases in the codebase
i18n:pack Saves language package
i18n:uninstall Uninstalls language packages
indexer
indexer:info Shows allowed Indexers
indexer:reindex Reindexes Data
indexer:reset Resets indexer status to invalid
indexer:set-mode Sets index mode type
indexer:show-mode Shows Index Mode
indexer:status Shows status of Indexer
info
info:adminuri Displays the Magento Admin URI
info:backups:list Prints list of available backup files
info:currency:list Displays the list of available currencies
info:dependencies:show-framework Shows number of dependencies on Magento framework
info:dependencies:show-modules Shows number of dependencies between modules
info:dependencies:show-modules-circular Shows number of circular dependencies between modules
info:language:list Displays the list of available language locales
info:timezone:list Displays the list of available timezones
maintenance
maintenance:allow-ips Sets maintenance mode exempt IPs
maintenance:disable Disables maintenance mode
maintenance:enable Enables maintenance mode
maintenance:status Displays maintenance mode status
module
module:disable Disables specified modules
module:enable Enables specified modules
module:status Displays status of modules
module:uninstall Uninstalls modules installed by composer
sampledata
sampledata:deploy Deploy sample data modules
sampledata:remove Remove all sample data packages from composer.json
sampledata:reset Reset all sample data modules for re-installation
setup
setup:backup Takes backup of Magento Application code base, media and database
setup:config:set Creates or modifies the deployment configuration
setup:cron:run Runs cron job scheduled for setup application
setup:db-data:upgrade Installs and upgrades data in the DB
setup:db-schema:upgrade Installs and upgrades the DB schema
setup:db:status Checks if DB schema or data requires upgrade
setup:di:compile Generates DI configuration and all missing classes that can be auto-generated
setup:install Installs the Magento application
setup:performance:generate-fixtures Generates fixtures
setup:rollback Rolls back Magento Application codebase, media and database
setup:static-content:deploy Deploys static view files
setup:store-config:set Installs the store configuration. Deprecated since 2.2.0. Use config:set instead
setup:uninstall Uninstalls the Magento application
setup:upgrade Upgrades the Magento application, DB data, and schema
store
store:list Displays the list of stores
store:website:list Displays the list of websites
theme
theme:uninstall Uninstalls theme
varnish
varnish:vcl:generate Generates Varnish VCL and echos it to the command line
Define your custom variables for Magento 2.2.2 install. I use pwgen
password generator command to randomise some parts of the values for database name DBNAME
, database username DBUSER
, database user password DBPASS
, Magento admin user password ADMINPASS
and the backend Admin url BACKEND_FRONTNAME
.
# defining variables
WEBROOT="/home/nginx/domains/${vhostname}/public"
IP=$(curl -4s ipinfo.io/ip)
DBPREFIX='mags_'
DBNAME="magento2$(pwgen -1cnys 4)"
DBUSER="magento2$(pwgen -1cnys 9)"
DBPASS=$(pwgen -1cnys 21)
ADMINUSER=adminuser
ADMINPASS="adminpass$(pwgen -1cnys 18)"
ADMINFNAME=first
ADMINLNAME=last
[email protected]
CURRENCY=USD
TIMEZONE='America/Chicago'
BACKEND_FRONTNAME="admin_au$(pwgen -1cnys 8)"
Use Centmin Mod addons/mysqladmin_shell.sh script to create the MySQL database, database user and database password based on the above set SSH session variables.
# create mysql database
echo "/usr/local/src/centminmod/addons/mysqladmin_shell.sh createuserdb $DBNAME $DBUSER $DBPASS"
/usr/local/src/centminmod/addons/mysqladmin_shell.sh createuserdb $DBNAME $DBUSER $DBPASS
Now using php run the $WEBROOT/bin/magento
binary to install and setup Magento 2.2.2
# magento installation
time php $WEBROOT/bin/magento setup:install --base-url=https://${vhostname}/ \
--db-host=localhost --db-prefix=$DBPREFIX --db-name=$DBNAME --db-user=$DBUSER --db-password=$DBPASS \
--admin-firstname=$ADMINFNAME --admin-lastname=$ADMINLNAME --admin-email=$ADMINEMAIL \
--admin-user=$ADMINUSER --admin-password=$ADMINPASS --language=en_US \
--backend-frontname=$BACKEND_FRONTNAME \
--currency=$CURRENCY --timezone=$TIMEZONE --use-rewrites=1
# setup whitelisted IP for maintenance mode
MYIP=$(last -i | grep "still logged in" | awk '{print $3}' | uniq)
php $WEBROOT/bin/magento maintenance:allow-ips $MYIP
# fix base-url if mistakes occur
php $WEBROOT/bin/magento setup:store-config:set --base-url="https://${vhostname}/"
php $WEBROOT/bin/magento setup:store-config:set --base-url-secure="https://${vhostname}/"
php $WEBROOT/bin/magento setup:store-config:set --use-secure=1
php $WEBROOT/bin/magento setup:store-config:set --use-secure-admin=1
php $WEBROOT/bin/magento cache:flush
# list database tables
echo "SELECT CONCAT(table_schema,'.',table_name) AS 'Table Name', CONCAT(ROUND(table_rows,2),' Rows') AS 'Number of Rows',ENGINE AS 'Storage Engine',CONCAT(ROUND(data_length/(1024*1024),2),'MB') AS 'Data Size',
CONCAT(ROUND(index_length/(1024*1024),2),'MB') AS 'Index Size' ,CONCAT(ROUND((data_length index_length)/(1024*1024),2),'MB') AS'Total', ROW_FORMAT, TABLE_COLLATION FROM information_schema.TABLES WHERE table_schema LIKE '$DBNAME';" | mysql -t
# mysql engine breakdown stats
echo "SELECT engine, count(*) tables, concat(round(sum(table_rows))) rows, concat(round(sum(data_length)/(1024*1024),2),'MB') data, concat(round(sum(index_length)/(1024*1024),2),'MB') idx, concat(round(sum(data_length index_length)/(1024*1024),2),'MB') total_size, round(sum(index_length)/sum(data_length),2) idxfrac FROM information_schema.TABLES WHERE table_schema LIKE '$DBNAME' GROUP BY engine ORDER BY sum(data_length index_length) DESC LIMIT 10;" | mysql -t
# setup default, full page and session based redis caching in redis databases 12, 13 and 14 respectively instead of default
# if using redis unix socket set to
# redisserver='/var/run/redis/redis.sock'
redisserver=127.0.0.1
# lz4 or gzip
compresstype=lz4
port=6379
php $WEBROOT/bin/magento setup:config:set --cache-backend=redis --cache-backend-redis-server=$redisserver --cache-backend-redis-db=12 --cache-backend-redis-port=$port
php $WEBROOT/bin/magento setup:config:set --page-cache=redis --page-cache-redis-server=$redisserver --page-cache-redis-db=13 --page-cache-redis-compress-data=$compresstype --page-cache-redis-port=$port
php $WEBROOT/bin/magento setup:config:set --session-save=redis --session-save-redis-host=$redisserver --session-save-redis-log-level=3 --session-save-redis-db=14 --session-save-redis-compression-lib=$compresstype --session-save-redis-max-concurrency=4 --session-save-redis-first-lifetime=600 --session-save-redis-bot-first-lifetime=60 --session-save-redis-bot-lifetime=7200 --session-save-redis-min-lifetime=60 --session-save-redis-max-lifetime=2592000 --session-save-redis-break-after-frontend=60 --session-save-redis-break-after-adminhtml=60 --session-save-redis-port=$port
#n98-magerun2 config:set catalog/frontend/grid_per_page_values "12,24,36"
#n98-magerun2 config:set catalog/frontend/grid_per_page "12"
n98-magerun2 config:set catalog/frontend/flat_catalog_category 1
n98-magerun2 config:set catalog/frontend/flat_catalog_product 1
n98-magerun2 config:set system/full_page_cache/caching_application 1
n98-magerun2 config:set system/full_page_cache/ttl 86400
n98-magerun2 config:set dev/grid/async_indexing 1
n98-magerun2 config:set sales_email/general/async_sending 1
php $WEBROOT/bin/magento cache:status
php $WEBROOT/bin/magento cache:flush
php $WEBROOT/bin/magento indexer:reindex cataloginventory_stock
php $WEBROOT/bin/magento indexer:reindex
php $WEBROOT/bin/magento cache:enable
# cronjob setup
crontab -l > cronjob.backups
ls -lah cronjob.backups
php $WEBROOT/bin/magento cron:install
crontab -l > cronjob.magento
sed -i 's|#~ MAGENTO START|\n#~ MAGENTO START|' cronjob.magento
crontab cronjob.magento
crontab -l
# set umask http://devdocs.magento.com/guides/v2.2/install-gde/install/post-install-umask.html
echo "022" > $WEBROOT/magento_umask
# optimisations for production mode only
php $WEBROOT/bin/magento deploy:mode:show
php $WEBROOT/bin/magento deploy:mode:set production
# optimisations
n98-magerun2 config:set dev/js/merge_files 1
n98-magerun2 config:set dev/css/merge_css_files 1
php $WEBROOT/bin/magento indexer:set-mode schedule design_config_grid customer_grid catalog_product_flat catalog_category_flat catalog_category_product catalog_product_category catalog_product_price catalog_product_attribute cataloginventory_stock catalogrule_rule catalogrule_product catalogsearch_fulltext
php $WEBROOT/bin/magento module:disable Shopial_Facebook
php $WEBROOT/bin/magento setup:static-content:deploy
php $WEBROOT/bin/magento setup:di:compile
echo "admin url = https://${vhostname}/${BACKEND_FRONTNAME}"
Optional install Peformance Dashboard Extension
composer require magehost/performance-dashboard
php $WEBROOT/bin/magento module:enable MageHost_PerformanceDashboard
php $WEBROOT/bin/magento setup:upgrade
php $WEBROOT/bin/magento setup:di:compile
php $WEBROOT/bin/magento setup:static-content:deploy --area adminhtml
composer dump-autoload -o
chown -R nginx:nginx "/home/nginx/domains/${vhostname}/public"
You can also install Magento 2 sample data but you need to switch to developer
mode first to install the sample data. Don't install sample data if you intend to run a production live web site.
Configuring logrotate for Magento 2 by setting up a /etc/logrotate.d/magento2
logrotate config file with following contents
/home/nginx/domains/magento.domain.com/public/var/log/*.log {
su root root
size 10M
missingok
rotate 50
compress
delaycompress
notifempty
dateext
}
Manually test logrotate
logrotate -df /etc/logrotate.d/magento2
As per https://community.centminmod.com/threads/updated-magento-2-nginx-directives-for-magento-2-15.10975/ with adjusted modifications derived from the reading of other info links.
In /usr/local/nginx/conf/nginx.conf
add within http {
content add a HSTS header map
http {
## Map HSTS header
map $scheme $mag_hstsheader { https "max-age=31556926; includeSubDomains"; }
- Make a copy of
/usr/local/nginx/conf/php.conf
named as/usr/local/nginx/conf/php_magento.conf
and then disable and comment out with hash in front offastcgi_split_path_info
directive in `/usr/local/nginx/conf/php_magento.conf. - Make a copy of Centmin Mod Nginx HTTP/2 HTTPS vhost config file
/usr/local/nginx/conf/conf.d/magento.domain.com.ssl.conf
named as/usr/local/nginx/conf/conf.d/magento.domain.com.ssl.conf.original
- Disable via renaming the Centmin Mod Nginx non-HTTPS vhost config file
/usr/local/nginx/conf/conf.d/magento.domain.com.conf
renamed as/usr/local/nginx/conf/conf.d/magento.domain.com.conf.disabled
cp -a /usr/local/nginx/conf/php.conf /usr/local/nginx/conf/php_magento.conf
sed -i 's|fastcgi_split_path_info|#fastcgi_split_path_info|' /usr/local/nginx/conf/php_magento.conf
cp -a /usr/local/nginx/conf/conf.d/magento.domain.com.ssl.conf /usr/local/nginx/conf/conf.d/magento.domain.com.ssl.conf.original
mv /usr/local/nginx/conf/conf.d/magento.domain.com.conf /usr/local/nginx/conf/conf.d/magento.domain.com.conf.disabled
Edit Centmin Mod HTTP/2 HTTPS Nginx vhost config file /usr/local/nginx/conf/conf.d/magento.domain.com.ssl.conf
and force HTTP to HTTPS redirect by uncommenting the 5 lines for return 302
redirect using nano linux text editor
nano /usr/local/nginx/conf/conf.d/magento.domain.com.ssl.conf
Enable 302 redirect of non-HTTPS requests to HTTPS version of site domain
# Centmin Mod Getting Started Guide
# must read http://centminmod.com/getstarted.html
# For HTTP/2 SSL Setup
# read http://centminmod.com/nginx_configure_https_ssl_spdy.html
# redirect from www to non-www forced SSL
# uncomment, save file and restart Nginx to enable
# if unsure use return 302 before using return 301
server {
listen 80;
server_name magento.domain.com www.magento.domain.com;
return 302 https://$server_name$request_uri;
}
Below is the just the Magento 2.2.2 related Nginx rules to be placed in /usr/local/nginx/conf/conf.d/magento.domain.com.ssl.conf
Nginx vhost config file.
set $MAGE_ROOT /home/nginx/domains/magento.domain.com/public;
root $MAGE_ROOT/pub;
include /usr/local/nginx/conf/503include-main.conf;
index index.php;
autoindex off;
charset UTF-8;
error_page 404 403 = /errors/404.php;
#add_header "X-UA-Compatible" "IE=Edge";
# PHP entry point for setup application
location ~* ^/setup($|/) {
root $MAGE_ROOT;
location ~ ^/setup/index.php {
include /usr/local/nginx/conf/php.conf;
}
location ~ ^/setup/(?!pub/). {
deny all;
}
location ~ ^/setup/pub/ {
add_header X-Frame-Options "SAMEORIGIN";
}
}
# PHP entry point for update application
location ~* ^/update($|/) {
root $MAGE_ROOT;
location ~ ^/update/index.php {
fastcgi_split_path_info ^(/update/index.php)(/. )$;
include /usr/local/nginx/conf/php_magento.conf;
}
# Deny everything but index.php
location ~ ^/update/(?!pub/). {
deny all;
}
location ~ ^/update/pub/ {
add_header X-Frame-Options "SAMEORIGIN";
}
}
location / {
include /usr/local/nginx/conf/503include-only.conf;
try_files $uri $uri/ /index.php$is_args$args;
}
location /pub/ {
location ~ ^/pub/media/(downloadable|customer|import|theme_customization/.*\.xml) {
deny all;
}
alias $MAGE_ROOT/pub/;
add_header X-Frame-Options "SAMEORIGIN";
}
location /static/ {
# Uncomment the following line in production mode
expires max;
# Remove signature of the static files that is used to overcome the browser cache
location ~ ^/static/version {
rewrite ^/static/(version\d*/)?(.*)$ /static/$2 last;
}
location ~* \.(ico|jpg|jpeg|png|gif|svg|js|css)$ {
add_header Cache-Control "public";
add_header Access-Control-Allow-Origin *;
add_header X-Frame-Options "SAMEORIGIN";
expires 30d;
if (!-f $request_filename) {
rewrite ^/static/?(.*)$ /static.php?resource=$1 last;
}
}
location ~* \.(swf|eot|ttf|otf|woff|woff2)$ {
add_header Cache-Control "public";
add_header Access-Control-Allow-Origin *;
add_header X-Frame-Options "SAMEORIGIN";
expires 1y;
if (!-f $request_filename) {
rewrite ^/static/?(.*)$ /static.php?resource=$1 last;
}
}
location ~* \.(zip|gz|gzip|bz2|csv|xml)$ {
add_header Cache-Control "no-store";
add_header X-Frame-Options "SAMEORIGIN";
expires off;
if (!-f $request_filename) {
rewrite ^/static/?(.*)$ /static.php?resource=$1 last;
}
}
if (!-f $request_filename) {
rewrite ^/static/?(.*)$ /static.php?resource=$1 last;
}
add_header X-Frame-Options "SAMEORIGIN";
}
location /media/ {
try_files $uri $uri/ /get.php$is_args$args;
location ~ ^/media/theme_customization/.*\.xml {
deny all;
}
location ~* \.(ico|jpg|jpeg|png|gif|svg|js|css)$ {
add_header Cache-Control "public";
add_header Access-Control-Allow-Origin *;
add_header X-Frame-Options "SAMEORIGIN";
expires 30d;
try_files $uri $uri/ /get.php$is_args$args;
}
location ~* \.(swf|eot|ttf|otf|woff|woff2)$ {
add_header Cache-Control "public";
add_header Access-Control-Allow-Origin *;
add_header X-Frame-Options "SAMEORIGIN";
expires 1y;
try_files $uri $uri/ /get.php$is_args$args;
}
location ~* \.(zip|gz|gzip|bz2|csv|xml)$ {
add_header Cache-Control "no-store";
add_header X-Frame-Options "SAMEORIGIN";
expires off;
try_files $uri $uri/ /get.php$is_args$args;
}
add_header X-Frame-Options "SAMEORIGIN";
}
location /media/customer/ {
deny all;
}
location /media/downloadable/ {
deny all;
}
location /media/import/ {
deny all;
}
# Deny cron and files with the obvious names. favorite entry points for hackers and script kiddie
location ~* ^/(cron|phpminiadmin|pma|sqlyog|adminer. )\.php { deny all; }
# Deny auth and composer
location ~ (auth|package|composer)\.(json|lock)$ { deny all; }
# PHP entry point for main application
location ~ (index|get|static|report|404|503|health_check)\.php$ {
try_files $uri =404;
add_header X-Processing-Time $request_time always;
add_header X-Request-ID $request_id always;
add_header Strict-Transport-Security $mag_hstsheader always;
add_header X-UA-Compatible 'IE=Edge,chrome=1';
add_header Link "<$scheme://$http_host$request_uri>; rel=\"canonical\"" always;
fastcgi_buffers 1024 4k;
fastcgi_param PHP_FLAG "session.auto_start=off \n suhosin.session.cryptua=off";
fastcgi_param PHP_VALUE "memory_limit=4096M \n max_execution_time=18000 \n max_input_time=18000";
fastcgi_read_timeout 600s;
fastcgi_connect_timeout 600s;
include /usr/local/nginx/conf/503include-only.conf;
include /usr/local/nginx/conf/php.conf;
}
# Banned locations (only reached if the earlier PHP entry point regexes don't match)
location ~* (\.php$|\.htaccess$|\.git) {
deny all;
}
include /usr/local/nginx/conf/pre-staticfiles-local-magento.domain.com.conf;
include /usr/local/nginx/conf/pre-staticfiles-global.conf;
#include /usr/local/nginx/conf/staticfiles.conf;
#include /usr/local/nginx/conf/php.conf;
#include /usr/local/nginx/conf/drop.conf;
#include /usr/local/nginx/conf/errorpage.conf;
include /usr/local/nginx/conf/vts_server.conf;
The resulting full Centmin Mod Nginx HTTP/2 HTTPS based Magento 2.2.2 vhost config file /usr/local/nginx/conf/conf.d/magento.domain.com.ssl.conf
for self-signed SSL certificate based site example is below:
# Centmin Mod Getting Started Guide
# must read http://centminmod.com/getstarted.html
# For HTTP/2 SSL Setup
# read http://centminmod.com/nginx_configure_https_ssl_spdy.html
# redirect from www to non-www forced SSL
# uncomment, save file and restart Nginx to enable
# if unsure use return 302 before using return 301
server {
listen 80;
server_name magento.domain.com www.magento.domain.com;
return 302 https://$server_name$request_uri;
}
server {
listen 443 ssl http2;
server_name magento.domain.com www.magento.domain.com;
ssl_dhparam /usr/local/nginx/conf/ssl/magento.domain.com/dhparam.pem;
ssl_certificate /usr/local/nginx/conf/ssl/magento.domain.com/magento.domain.com.crt;
ssl_certificate_key /usr/local/nginx/conf/ssl/magento.domain.com/magento.domain.com.key;
include /usr/local/nginx/conf/ssl_include.conf;
# cloudflare authenticated origin pull cert community.centminmod.com/threads/13847/
#ssl_client_certificate /usr/local/nginx/conf/ssl/cloudflare/magento.domain.com/origin.crt;
#ssl_verify_client on;
http2_max_field_size 16k;
http2_max_header_size 32k;
# mozilla recommended
ssl_ciphers ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA:ECDHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA:ECDHE-ECDSA-DES-CBC3-SHA:ECDHE-RSA-DES-CBC3-SHA:EDH-RSA-DES-CBC3-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:DES-CBC3-SHA:!DSS;
ssl_prefer_server_ciphers on;
#add_header Alternate-Protocol 443:npn-spdy/3;
# before enabling HSTS line below read centminmod.com/nginx_domain_dns_setup.html#hsts
#add_header Strict-Transport-Security "max-age=31536000; includeSubdomains;";
#add_header X-Frame-Options SAMEORIGIN;
#add_header X-Xss-Protection "1; mode=block" always;
#add_header X-Content-Type-Options "nosniff" always;
#add_header Referrer-Policy "strict-origin-when-cross-origin";
#spdy_headers_comp 5;
ssl_buffer_size 1369;
ssl_session_tickets on;
# enable ocsp stapling
#resolver 8.8.8.8 8.8.4.4 valid=10m;
#resolver_timeout 10s;
#ssl_stapling on;
#ssl_stapling_verify on;
#ssl_trusted_certificate /usr/local/nginx/conf/ssl/magento.domain.com/magento.domain.com-trusted.crt;
# ngx_pagespeed & ngx_pagespeed handler
#include /usr/local/nginx/conf/pagespeed.conf;
#include /usr/local/nginx/conf/pagespeedhandler.conf;
#include /usr/local/nginx/conf/pagespeedstatslog.conf;
# limit_conn limit_per_ip 16;
# ssi on;
access_log /home/nginx/domains/magento.domain.com/log/access.log combined buffer=256k flush=5m;
error_log /home/nginx/domains/magento.domain.com/log/error.log;
#include /usr/local/nginx/conf/autoprotect/magento.domain.com/autoprotect-magento.domain.com.conf;
set $MAGE_ROOT /home/nginx/domains/magento.domain.com/public;
root $MAGE_ROOT/pub;
include /usr/local/nginx/conf/503include-main.conf;
index index.php;
autoindex off;
charset UTF-8;
error_page 404 403 = /errors/404.php;
#add_header "X-UA-Compatible" "IE=Edge";
# PHP entry point for setup application
location ~* ^/setup($|/) {
root $MAGE_ROOT;
location ~ ^/setup/index.php {
include /usr/local/nginx/conf/php.conf;
}
location ~ ^/setup/(?!pub/). {
deny all;
}
location ~ ^/setup/pub/ {
add_header X-Frame-Options "SAMEORIGIN";
}
}
# PHP entry point for update application
location ~* ^/update($|/) {
root $MAGE_ROOT;
location ~ ^/update/index.php {
fastcgi_split_path_info ^(/update/index.php)(/. )$;
include /usr/local/nginx/conf/php_magento.conf;
}
# Deny everything but index.php
location ~ ^/update/(?!pub/). {
deny all;
}
location ~ ^/update/pub/ {
add_header X-Frame-Options "SAMEORIGIN";
}
}
location / {
include /usr/local/nginx/conf/503include-only.conf;
try_files $uri $uri/ /index.php$is_args$args;
}
location /pub/ {
location ~ ^/pub/media/(downloadable|customer|import|theme_customization/.*\.xml) {
deny all;
}
alias $MAGE_ROOT/pub/;
add_header X-Frame-Options "SAMEORIGIN";
}
location /static/ {
# Uncomment the following line in production mode
expires max;
# Remove signature of the static files that is used to overcome the browser cache
location ~ ^/static/version {
rewrite ^/static/(version\d*/)?(.*)$ /static/$2 last;
}
location ~* \.(ico|jpg|jpeg|png|gif|svg|js|css)$ {
add_header Cache-Control "public";
add_header Access-Control-Allow-Origin *;
add_header X-Frame-Options "SAMEORIGIN";
expires 30d;
if (!-f $request_filename) {
rewrite ^/static/?(.*)$ /static.php?resource=$1 last;
}
}
location ~* \.(swf|eot|ttf|otf|woff|woff2)$ {
add_header Cache-Control "public";
add_header Access-Control-Allow-Origin *;
add_header X-Frame-Options "SAMEORIGIN";
expires 1y;
if (!-f $request_filename) {
rewrite ^/static/?(.*)$ /static.php?resource=$1 last;
}
}
location ~* \.(zip|gz|gzip|bz2|csv|xml)$ {
add_header Cache-Control "no-store";
add_header X-Frame-Options "SAMEORIGIN";
expires off;
if (!-f $request_filename) {
rewrite ^/static/?(.*)$ /static.php?resource=$1 last;
}
}
if (!-f $request_filename) {
rewrite ^/static/?(.*)$ /static.php?resource=$1 last;
}
add_header X-Frame-Options "SAMEORIGIN";
}
location /media/ {
try_files $uri $uri/ /get.php$is_args$args;
location ~ ^/media/theme_customization/.*\.xml {
deny all;
}
location ~* \.(ico|jpg|jpeg|png|gif|svg|js|css)$ {
add_header Cache-Control "public";
add_header Access-Control-Allow-Origin *;
add_header X-Frame-Options "SAMEORIGIN";
expires 30d;
try_files $uri $uri/ /get.php$is_args$args;
}
location ~* \.(swf|eot|ttf|otf|woff|woff2)$ {
add_header Cache-Control "public";
add_header Access-Control-Allow-Origin *;
add_header X-Frame-Options "SAMEORIGIN";
expires 1y;
try_files $uri $uri/ /get.php$is_args$args;
}
location ~* \.(zip|gz|gzip|bz2|csv|xml)$ {
add_header Cache-Control "no-store";
add_header X-Frame-Options "SAMEORIGIN";
expires off;
try_files $uri $uri/ /get.php$is_args$args;
}
add_header X-Frame-Options "SAMEORIGIN";
}
location /media/customer/ {
deny all;
}
location /media/downloadable/ {
deny all;
}
location /media/import/ {
deny all;
}
# Deny cron and files with the obvious names. favorite entry points for hackers and script kiddie
location ~* ^/(cron|phpminiadmin|pma|sqlyog|adminer. )\.php { deny all; }
# Deny auth and composer
location ~ (auth|package|composer)\.(json|lock)$ { deny all; }
# PHP entry point for main application
location ~ (index|get|static|report|404|503|health_check)\.php$ {
try_files $uri =404;
add_header X-Processing-Time $request_time always;
add_header X-Request-ID $request_id always;
add_header Strict-Transport-Security $mag_hstsheader always;
add_header X-UA-Compatible 'IE=Edge,chrome=1';
add_header Link "<$scheme://$http_host$request_uri>; rel=\"canonical\"" always;
fastcgi_buffers 1024 4k;
fastcgi_param PHP_FLAG "session.auto_start=off \n suhosin.session.cryptua=off";
fastcgi_param PHP_VALUE "memory_limit=4096M \n max_execution_time=18000 \n max_input_time=18000";
fastcgi_read_timeout 600s;
fastcgi_connect_timeout 600s;
include /usr/local/nginx/conf/503include-only.conf;
include /usr/local/nginx/conf/php.conf;
}
# Banned locations (only reached if the earlier PHP entry point regexes don't match)
location ~* (\.php$|\.htaccess$|\.git) {
deny all;
}
include /usr/local/nginx/conf/pre-staticfiles-local-magento.domain.com.conf;
include /usr/local/nginx/conf/pre-staticfiles-global.conf;
#include /usr/local/nginx/conf/staticfiles.conf;
#include /usr/local/nginx/conf/php.conf;
#include /usr/local/nginx/conf/drop.conf;
#include /usr/local/nginx/conf/errorpage.conf;
include /usr/local/nginx/conf/vts_server.conf;
}
End result is Centmin Mod Nginx 1.13 HTTP/2 HTTPS based Magento 2.2.2 installation
system info
n98-magerun2 sys:info --skip-root-check
Magento System Information
------------------ -----------------------------------------------
| name | value |
------------------ -----------------------------------------------
| Name | Magento |
| Version | 2.2.2 |
| Edition | Community |
| Root | /home/nginx/domains/magento.domain.com/public |
| Application Mode | production |
| Session | redis |
| Crypt Key | d45f000b87ce82****************** |
| Install Date | Sun, 11 Mar 2018 20:40:12 0000 |
| Cache Backend | Cm_Cache_Backend_Redis |
| Vendors | Magento, Dotdigitalgroup, Shopial, Temando |
| Attribute Count | 134 |
| Customer Count | 0 |
| Category Count | 2 |
| Product Count | 0 |
------------------ -----------------------------------------------
cache list
n98-magerun2 cache:list --skip-root-check
Magento Cache Types
------------------------ -------------------------------- ---------
| Name | Type | Enabled |
------------------------ -------------------------------- ---------
| config | Configuration | 1 |
| layout | Layouts | 1 |
| block_html | Blocks HTML output | 1 |
| collections | Collections Data | 1 |
| reflection | Reflection Data | 1 |
| db_ddl | Database DDL operations | 1 |
| eav | EAV types and attributes | 1 |
| customer_notification | Customer Notification | 1 |
| config_integration | Integrations Configuration | 1 |
| config_integration_api | Integrations API Configuration | 1 |
| full_page | Page Cache | 1 |
| translate | Translations | 1 |
| config_webservice | Web Services Configuration | 1 |
------------------------ -------------------------------- ---------
system check
n98-magerun2 sys:check --skip-root-check
SETTINGS
âś” Secure BaseURL: https://magento.domain.com/ of Store: default - OK
âś” Unsecure BaseURL: https://magento.domain.com/ of Store: default - OK
âś” Empty cookie Domain (secure) of Store: default - OK
âś” Empty cookie Domain (unsecure) of Store: default - OK
FILESYSTEM
âś” Folder pub/media found.
âś” Folder var found.
âś– Folder var/cache not found! Usage: Used for caching
âś” Folder var/session found.
âś” File app/etc/env.php found.
PHP
âś” Required PHP Module simplexml found.
âś” Required PHP Module mcrypt found.
âś” Required PHP Module hash found.
âś” Required PHP Module gd found.
âś” Required PHP Module dom found.
âś” Required PHP Module iconv found.
âś” Required PHP Module curl found.
âś” Required PHP Module soap found.
âś” Required PHP Module pdo found.
âś” Required PHP Module pdo_mysql found.
âś” Required PHP Module intl found.
âś” Required PHP Module openssl found.
âś” Bytecode Cache Zend OPcache found.
MYSQL
âś” MySQL Version 10.1.31-MariaDB found.
âś” Required MySQL Storage Engine InnoDB found.
database info
n98-magerun2 db:info --skip-root-check
------------------------ ----------------------------------------------------------------------------------------------------
| Name | Value |
------------------------ ----------------------------------------------------------------------------------------------------
| host | localhost |
| dbname | magento2***** |
| username | magento2a6******** |
| password | jIPa748zeZ*********** |
| model | mysql4 |
| engine | innodb |
| initStatements | SET NAMES utf8; |
| active | 1 |
| prefix | mags_ |
| PDO-Connection-String | mysql:host=localhost;port=3306;dbname=magento2**** |
| JDBC-Connection-String | jdbc:mysql://localhost:3306/magento2****?username=magento2a6*******&password=jjIPa748zeZ********** |
| MySQL-Cli-String | mysql -h'localhost' -u'magento2a6*******' --password='jjIPa748zeZ**********' 'magento2****' |
------------------------ ----------------------------------------------------------------------------------------------------
database server status
n98-magerun2 db:status --skip-root-check
-------------------------------- -------------- -----------------------------------------------------------------------------
| Variable Name | Value | Description |
-------------------------------- -------------- -----------------------------------------------------------------------------
| Aborted_connects | 0 | Total number of failed attempts to connect to MySQL. |
| Created_tmp_disk_tables | 406 | Number of temporary tables that have been created on disk instead of |
| | | in-memory. Lower is better. |
| Handler_read_first | 6422 | Number of times a table handler made a request to read the first row of a |
| | | table index. |
| Handler_read_rnd_next | 7280977 | Number of requests to read the next row in the data file. This value is |
| | | high if you are doing a lot of table scans. Generally this suggests that |
| | | your tables are not properly indexed or that your queries are not written |
| | | to take advantage of the indexes you have. |
| Innodb_buffer_pool_pages_dirty | 0 | Indicates the number of InnoDB buffer pool data pages that have been |
| | | changed in memory, but the changes are not yet written (flushed) to the |
| | | InnoDB data files |
| Innodb_buffer_pool_wait_free | 0 | Number of times MySQL has to wait for memory pages to be flushed. |
| Key_reads | 9 | Number of filesystem accesses MySQL performed to fetch database indexes. |
| Max_used_connections | 12 | Max number of connections MySQL has had open at the same time since the |
| | | server was last restarted. |
| Open_tables | 398 | Number of tables that are currently open. |
| Select_full_join | 11 | Number of full joins MySQL has performed to satisfy client queries. |
| Slow_queries | 0 | Number of queries that have taken longer than usual to execute. |
| Threads_connected | 1 | Total number of clients that have currently open connections to the server. |
| Uptime | 19 hours ago | Time since the server was last restarted. |
| Full table scans | 69.86% | HINT: "Handler_read_rnd_next" is reset to zero when reached the value of |
| | | 2^32 (4G). |
| InnoDB Buffer Pool hit | 100.00% | An InnoDB Buffer Pool hit ratio below 99.9% is a weak indicator that your |
| | | InnoDB Buffer Pool could be increased. |
-------------------------------- -------------- -----------------------------------------------------------------------------
MariaDB server variables of note
n98-magerun2 db:variables --skip-root-check
--------------------------------- --------
| Variable Name | Value |
--------------------------------- --------
| have_query_cache | YES |
| innodb_additional_mem_pool_size | 8M |
| innodb_buffer_pool_size | 192M |
| innodb_log_buffer_size | 8M |
| innodb_log_file_size | 128M |
| innodb_thread_concurrency | 0 |
| join_buffer_size | 128K |
| key_buffer_size | 32M |
| max_allowed_packet | 64M |
| max_connections | 300 |
| max_heap_table_size | 128M |
| open_files_limit | 524288 |
| query_cache_size | 64M |
| query_cache_type | ON |
| read_buffer_size | 128K |
| read_rnd_buffer_size | 256K |
| sort_buffer_size | 256K |
| table_definition_cache | 8192 |
| table_open_cache | 4096 |
| thread_cache_size | 128B |
| tmp_table_size | 128M |
--------------------------------- --------
Show Magento 2 database tables
n98-magerun2 db:query "show tables;" --skip-root-check
Tables_in_magento24MUU
mags_admin_passwords
mags_admin_system_messages
mags_admin_user
mags_admin_user_session
mags_adminnotification_inbox
mags_authorization_role
mags_authorization_rule
mags_cache
mags_cache_tag
mags_captcha_log
mags_catalog_category_entity
mags_catalog_category_entity_datetime
mags_catalog_category_entity_decimal
mags_catalog_category_entity_int
mags_catalog_category_entity_text
mags_catalog_category_entity_varchar
mags_catalog_category_flat_cl
mags_catalog_category_flat_store_1
mags_catalog_category_product
mags_catalog_category_product_cl
mags_catalog_category_product_index
mags_catalog_category_product_index_replica
mags_catalog_category_product_index_tmp
mags_catalog_compare_item
mags_catalog_eav_attribute
mags_catalog_product_attribute_cl
mags_catalog_product_bundle_option
mags_catalog_product_bundle_option_value
mags_catalog_product_bundle_price_index
mags_catalog_product_bundle_selection
mags_catalog_product_bundle_selection_price
mags_catalog_product_bundle_stock_index
mags_catalog_product_category_cl
mags_catalog_product_entity
mags_catalog_product_entity_datetime
mags_catalog_product_entity_decimal
mags_catalog_product_entity_gallery
mags_catalog_product_entity_int
mags_catalog_product_entity_media_gallery
mags_catalog_product_entity_media_gallery_value
mags_catalog_product_entity_media_gallery_value_to_entity
mags_catalog_product_entity_media_gallery_value_video
mags_catalog_product_entity_text
mags_catalog_product_entity_tier_price
mags_catalog_product_entity_varchar
mags_catalog_product_flat_1
mags_catalog_product_flat_cl
mags_catalog_product_frontend_action
mags_catalog_product_index_eav
mags_catalog_product_index_eav_decimal
mags_catalog_product_index_eav_decimal_idx
mags_catalog_product_index_eav_decimal_replica
mags_catalog_product_index_eav_decimal_tmp
mags_catalog_product_index_eav_idx
mags_catalog_product_index_eav_replica
mags_catalog_product_index_eav_tmp
mags_catalog_product_index_price
mags_catalog_product_index_price_bundle_idx
mags_catalog_product_index_price_bundle_opt_idx
mags_catalog_product_index_price_bundle_opt_tmp
mags_catalog_product_index_price_bundle_sel_idx
mags_catalog_product_index_price_bundle_sel_tmp
mags_catalog_product_index_price_bundle_tmp
mags_catalog_product_index_price_cfg_opt_agr_idx
mags_catalog_product_index_price_cfg_opt_agr_tmp
mags_catalog_product_index_price_cfg_opt_idx
mags_catalog_product_index_price_cfg_opt_tmp
mags_catalog_product_index_price_downlod_idx
mags_catalog_product_index_price_downlod_tmp
mags_catalog_product_index_price_final_idx
mags_catalog_product_index_price_final_tmp
mags_catalog_product_index_price_idx
mags_catalog_product_index_price_opt_agr_idx
mags_catalog_product_index_price_opt_agr_tmp
mags_catalog_product_index_price_opt_idx
mags_catalog_product_index_price_opt_tmp
mags_catalog_product_index_price_replica
mags_catalog_product_index_price_tmp
mags_catalog_product_index_tier_price
mags_catalog_product_index_website
mags_catalog_product_link
mags_catalog_product_link_attribute
mags_catalog_product_link_attribute_decimal
mags_catalog_product_link_attribute_int
mags_catalog_product_link_attribute_varchar
mags_catalog_product_link_type
mags_catalog_product_option
mags_catalog_product_option_price
mags_catalog_product_option_title
mags_catalog_product_option_type_price
mags_catalog_product_option_type_title
mags_catalog_product_option_type_value
mags_catalog_product_price_cl
mags_catalog_product_relation
mags_catalog_product_super_attribute
mags_catalog_product_super_attribute_label
mags_catalog_product_super_link
mags_catalog_product_website
mags_catalog_url_rewrite_product_category
mags_cataloginventory_stock
mags_cataloginventory_stock_cl
mags_cataloginventory_stock_item
mags_cataloginventory_stock_status
mags_cataloginventory_stock_status_idx
mags_cataloginventory_stock_status_replica
mags_cataloginventory_stock_status_tmp
mags_catalogrule
mags_catalogrule_customer_group
mags_catalogrule_group_website
mags_catalogrule_group_website_replica
mags_catalogrule_product
mags_catalogrule_product_cl
mags_catalogrule_product_price
mags_catalogrule_product_price_replica
mags_catalogrule_product_replica
mags_catalogrule_rule_cl
mags_catalogrule_website
mags_catalogsearch_fulltext_cl
mags_catalogsearch_fulltext_scope1
mags_checkout_agreement
mags_checkout_agreement_store
mags_cms_block
mags_cms_block_store
mags_cms_page
mags_cms_page_store
mags_core_config_data
mags_cron_schedule
mags_customer_address_entity
mags_customer_address_entity_datetime
mags_customer_address_entity_decimal
mags_customer_address_entity_int
mags_customer_address_entity_text
mags_customer_address_entity_varchar
mags_customer_dummy_cl
mags_customer_eav_attribute
mags_customer_eav_attribute_website
mags_customer_entity
mags_customer_entity_datetime
mags_customer_entity_decimal
mags_customer_entity_int
mags_customer_entity_text
mags_customer_entity_varchar
mags_customer_form_attribute
mags_customer_grid_flat
mags_customer_group
mags_customer_log
mags_customer_visitor
mags_design_change
mags_design_config_dummy_cl
mags_design_config_grid_flat
mags_directory_country
mags_directory_country_format
mags_directory_country_region
mags_directory_country_region_name
mags_directory_currency_rate
mags_downloadable_link
mags_downloadable_link_price
mags_downloadable_link_purchased
mags_downloadable_link_purchased_item
mags_downloadable_link_title
mags_downloadable_sample
mags_downloadable_sample_title
mags_eav_attribute
mags_eav_attribute_group
mags_eav_attribute_label
mags_eav_attribute_option
mags_eav_attribute_option_swatch
mags_eav_attribute_option_value
mags_eav_attribute_set
mags_eav_entity
mags_eav_entity_attribute
mags_eav_entity_datetime
mags_eav_entity_decimal
mags_eav_entity_int
mags_eav_entity_store
mags_eav_entity_text
mags_eav_entity_type
mags_eav_entity_varchar
mags_eav_form_element
mags_eav_form_fieldset
mags_eav_form_fieldset_label
mags_eav_form_type
mags_eav_form_type_entity
mags_email_automation
mags_email_campaign
mags_email_catalog
mags_email_contact
mags_email_importer
mags_email_order
mags_email_review
mags_email_rules
mags_email_template
mags_email_wishlist
mags_flag
mags_gift_message
mags_googleoptimizer_code
mags_import_history
mags_importexport_importdata
mags_indexer_state
mags_integration
mags_layout_link
mags_layout_update
mags_mview_state
mags_newsletter_problem
mags_newsletter_queue
mags_newsletter_queue_link
mags_newsletter_queue_store_link
mags_newsletter_subscriber
mags_newsletter_template
mags_oauth_consumer
mags_oauth_nonce
mags_oauth_token
mags_oauth_token_request_log
mags_password_reset_request_event
mags_paypal_billing_agreement
mags_paypal_billing_agreement_order
mags_paypal_cert
mags_paypal_payment_transaction
mags_paypal_settlement_report
mags_paypal_settlement_report_row
mags_persistent_session
mags_product_alert_price
mags_product_alert_stock
mags_quote
mags_quote_address
mags_quote_address_item
mags_quote_id_mask
mags_quote_item
mags_quote_item_option
mags_quote_payment
mags_quote_shipping_rate
mags_rating
mags_rating_entity
mags_rating_option
mags_rating_option_vote
mags_rating_option_vote_aggregated
mags_rating_store
mags_rating_title
mags_release_notification_viewer_log
mags_report_compared_product_index
mags_report_event
mags_report_event_types
mags_report_viewed_product_aggregated_daily
mags_report_viewed_product_aggregated_monthly
mags_report_viewed_product_aggregated_yearly
mags_report_viewed_product_index
mags_reporting_counts
mags_reporting_module_status
mags_reporting_orders
mags_reporting_system_updates
mags_reporting_users
mags_review
mags_review_detail
mags_review_entity
mags_review_entity_summary
mags_review_status
mags_review_store
mags_sales_bestsellers_aggregated_daily
mags_sales_bestsellers_aggregated_monthly
mags_sales_bestsellers_aggregated_yearly
mags_sales_creditmemo
mags_sales_creditmemo_comment
mags_sales_creditmemo_grid
mags_sales_creditmemo_item
mags_sales_invoice
mags_sales_invoice_comment
mags_sales_invoice_grid
mags_sales_invoice_item
mags_sales_invoiced_aggregated
mags_sales_invoiced_aggregated_order
mags_sales_order
mags_sales_order_address
mags_sales_order_aggregated_created
mags_sales_order_aggregated_updated
mags_sales_order_grid
mags_sales_order_item
mags_sales_order_payment
mags_sales_order_status
mags_sales_order_status_history
mags_sales_order_status_label
mags_sales_order_status_state
mags_sales_order_tax
mags_sales_order_tax_item
mags_sales_payment_transaction
mags_sales_refunded_aggregated
mags_sales_refunded_aggregated_order
mags_sales_sequence_meta
mags_sales_sequence_profile
mags_sales_shipment
mags_sales_shipment_comment
mags_sales_shipment_grid
mags_sales_shipment_item
mags_sales_shipment_track
mags_sales_shipping_aggregated
mags_sales_shipping_aggregated_order
mags_salesrule
mags_salesrule_coupon
mags_salesrule_coupon_aggregated
mags_salesrule_coupon_aggregated_order
mags_salesrule_coupon_aggregated_updated
mags_salesrule_coupon_usage
mags_salesrule_customer
mags_salesrule_customer_group
mags_salesrule_label
mags_salesrule_product_attribute
mags_salesrule_website
mags_search_query
mags_search_synonyms
mags_sendfriend_log
mags_sequence_creditmemo_0
mags_sequence_creditmemo_1
mags_sequence_invoice_0
mags_sequence_invoice_1
mags_sequence_order_0
mags_sequence_order_1
mags_sequence_shipment_0
mags_sequence_shipment_1
mags_session
mags_setup_module
mags_shipping_tablerate
mags_signifyd_case
mags_sitemap
mags_store
mags_store_group
mags_store_website
mags_tax_calculation
mags_tax_calculation_rate
mags_tax_calculation_rate_title
mags_tax_calculation_rule
mags_tax_class
mags_tax_order_aggregated_created
mags_tax_order_aggregated_updated
mags_temando_checkout_address
mags_temando_order
mags_temando_shipment
mags_theme
mags_theme_file
mags_translation
mags_ui_bookmark
mags_url_rewrite
mags_variable
mags_variable_value
mags_vault_payment_token
mags_vault_payment_token_order_payment_link
mags_weee_tax
mags_widget
mags_widget_instance
mags_widget_instance_page
mags_widget_instance_page_layout
mags_wishlist
mags_wishlist_item
mags_wishlist_item_option
Verifying cache and cache_tag database tables contents with above defaulted database prefix = mags_
when SSH session variable DBPREFIX='mags_'
was set
n98-magerun2 db:query "SELECT * from mags_cache limit 0,10;" --skip-root-check
n98-magerun2 db:query "SELECT * from mags_cache_tag limit 0,10;" --skip-root-check
Magento 2 database engine breakdown stats
echo "SELECT engine, count(*) tables, concat(round(sum(table_rows))) rows, concat(round(sum(data_length)/(1024*1024),2),'MB') data, concat(round(sum(index_length)/(1024*1024),2),'MB') idx, concat(round(sum(data_length index_length)/(1024*1024),2),'MB') total_size, round(sum(index_length)/sum(data_length),2) idxfrac FROM information_schema.TABLES WHERE table_schema LIKE '$DBNAME' GROUP BY engine ORDER BY sum(data_length index_length) DESC LIMIT 10;" | mysql -t
-------- -------- ------ -------- --------- ------------ ---------
| engine | tables | rows | data | idx | total_size | idxfrac |
-------- -------- ------ -------- --------- ------------ ---------
| InnoDB | 326 | 5535 | 5.59MB | 11.88MB | 17.47MB | 2.12 |
| MEMORY | 14 | 0 | 0.00MB | 0.00MB | 0.00MB | NULL |
-------- -------- ------ -------- --------- ------------ ---------
default Magento modules' status
php $WEBROOT/bin/magento module:status
List of enabled modules:
Magento_Store
MageHost_PerformanceDashboard
Magento_Directory
Magento_AdvancedPricingImportExport
Magento_Config
Magento_Backend
Magento_Theme
Magento_Eav
Magento_Backup
Magento_Customer
Magento_AdminNotification
Magento_BundleImportExport
Magento_CacheInvalidate
Magento_Indexer
Magento_Cms
Magento_Security
Magento_CatalogImportExport
Magento_Rule
Magento_Cron
Magento_Catalog
Magento_Search
Magento_CatalogUrlRewrite
Magento_Widget
Magento_Quote
Magento_SalesSequence
Magento_Payment
Magento_CmsUrlRewrite
Magento_User
Magento_ConfigurableImportExport
Magento_Msrp
Magento_CatalogInventory
Magento_Contact
Magento_Cookie
Magento_Newsletter
Magento_CurrencySymbol
Magento_Sales
Magento_Integration
Magento_CustomerImportExport
Magento_Deploy
Magento_Developer
Magento_Dhl
Magento_Authorization
Magento_Downloadable
Magento_ImportExport
Magento_Bundle
Magento_Email
Magento_EncryptionKey
Magento_Fedex
Magento_GiftMessage
Magento_Checkout
Magento_GoogleAnalytics
Magento_Ui
Magento_GroupedImportExport
Magento_GroupedProduct
Magento_DownloadableImportExport
Magento_CatalogRule
Magento_InstantPurchase
Magento_Analytics
Magento_LayeredNavigation
Magento_Marketplace
Magento_MediaStorage
Magento_ConfigurableProduct
Magento_Multishipping
Magento_NewRelicReporting
Magento_Reports
Magento_OfflinePayments
Magento_SalesRule
Magento_PageCache
Magento_Vault
Magento_Paypal
Magento_Persistent
Magento_ProductAlert
Magento_ProductVideo
Magento_CheckoutAgreements
Magento_QuoteAnalytics
Magento_ReleaseNotification
Magento_Review
Magento_RequireJs
Magento_Shipping
Magento_ReviewAnalytics
Magento_Robots
Magento_Rss
Magento_CatalogRuleConfigurable
Magento_Captcha
Magento_SalesAnalytics
Magento_SalesInventory
Magento_OfflineShipping
Magento_ConfigurableProductSales
Magento_UrlRewrite
Magento_CatalogSearch
Magento_CustomerAnalytics
Magento_SendFriend
Magento_Wishlist
Magento_Signifyd
Magento_Sitemap
Magento_Authorizenet
Magento_Swagger
Magento_Swatches
Magento_SwatchesLayeredNavigation
Magento_Tax
Magento_TaxImportExport
Magento_GoogleAdwords
Magento_Translation
Magento_GoogleOptimizer
Magento_Ups
Magento_SampleData
Magento_CatalogAnalytics
Magento_Usps
Magento_Variable
Magento_Braintree
Magento_Version
Magento_Webapi
Magento_WebapiSecurity
Magento_Weee
Magento_CatalogWidget
Dotdigitalgroup_Email
Magento_WishlistAnalytics
Shopial_Facebook
Temando_Shipping
List of disabled modules:
None
Asynchronous Indexing
php $WEBROOT/bin/magento indexer:show-mode
Design Config Grid: Update by Schedule
Customer Grid: Update by Schedule
Product Flat Data: Update by Schedule
Category Flat Data: Update by Schedule
Category Products: Update by Schedule
Product Categories: Update by Schedule
Product Price: Update by Schedule
Product EAV: Update by Schedule
Stock: Update by Schedule
Catalog Rule Product: Update by Schedule
Catalog Product Rule: Update by Schedule
Catalog Search: Update by Schedule
static file location
ls -lah pub/static/frontend/Magento/luma/en_US/css/
total 392K
drwxr-sr-x 2 root nginx 4.0K Mar 14 08:09 .
drwxr-sr-x 68 root nginx 4.0K Mar 14 08:09 ..
-rw-r--r-- 1 root nginx 5.7K Mar 14 08:09 email.css
-rw-r--r-- 1 root nginx 2.0K Mar 14 08:09 email-fonts.css
-rw-r--r-- 1 root nginx 8.8K Mar 14 08:09 email-inline.css
-rw-r--r-- 1 root nginx 1.2K Mar 14 08:09 print.css
-rw-r--r-- 1 root nginx 64K Mar 14 08:09 styles-l.css
-rw-r--r-- 1 root nginx 290K Mar 14 08:09 styles-m.css
ls -lah pub/static/_cache/merged/
total 2.4M
drwxr-sr-x 2 nginx nginx 4.0K Mar 14 12:13 .
drwxr-sr-x 3 nginx nginx 4.0K Mar 14 08:10 ..
-rw-r--r-- 1 nginx nginx 297K Mar 14 08:10 9de8797d0c615276fc794278a0af8df2.css
-rw-r--r-- 1 nginx nginx 647K Mar 14 12:13 9e492d36090b18d041a5555bf3f0fd98.css
-rw-r--r-- 1 nginx nginx 131K Mar 14 11:25 a814ec60c7b703d863ceda92980506f6.js
-rw-r--r-- 1 nginx nginx 104K Mar 14 08:10 c0b5661e7cfc4d3e29c8fc8495e4d56e.js
-rw-r--r-- 1 nginx nginx 99K Mar 14 11:09 ddce5b0a41e6dbae4b6f458053932955.js
-rw-r--r-- 1 nginx nginx 483K Mar 14 11:09 e6a662994948b56fa4f39e1f141aaed3.css
-rw-r--r-- 1 nginx nginx 669K Mar 14 11:25 fe7035d3b7b90d9b17c968ffd74cf349.css
ls -lah pub/static/frontend/Magento/luma/en_US/jquery
total 1.2M
drwxr-sr-x 6 root nginx 4.0K Mar 14 08:08 .
drwxr-sr-x 68 root nginx 4.0K Mar 14 08:09 ..
drwxr-sr-x 5 root nginx 4.0K Mar 14 08:08 colorpicker
drwxr-sr-x 4 root nginx 4.0K Mar 14 08:08 editableMultiselect
drwxr-sr-x 6 root nginx 4.0K Mar 14 08:08 fileUploader
-rw-r--r-- 1 root nginx 1.5K Mar 14 08:08 jquery.ba-hashchange.min.js
-rw-r--r-- 1 root nginx 2.2K Mar 14 08:08 jquery.cookie.js
-rw-r--r-- 1 root nginx 5.7K Mar 14 08:08 jquery.details.js
-rw-r--r-- 1 root nginx 5.0K Mar 14 08:08 jquery.hoverIntent.js
-rw-r--r-- 1 root nginx 6.1K Mar 14 08:08 jquery.metadata.js
-rw-r--r-- 1 root nginx 17K Mar 14 08:08 jquery-migrate.js
-rw-r--r-- 1 root nginx 95K Mar 14 08:08 jquery.min.js
-rw-r--r-- 1 root nginx 24K Mar 14 08:08 jquery.mobile.custom.js
-rw-r--r-- 1 root nginx 1.4K Mar 14 08:08 jquery.parsequery.js
-rw-r--r-- 1 root nginx 6.9K Mar 14 08:08 jquery.storageapi.min.js
-rw-r--r-- 1 root nginx 7.8K Mar 14 08:08 jquery.tabs.js
-rw-r--r-- 1 root nginx 441K Mar 14 08:08 jquery-ui-1.9.2.js
-rw-r--r-- 1 root nginx 427K Mar 14 08:08 jquery-ui.js
-rw-r--r-- 1 root nginx 71K Mar 14 08:08 jquery-ui-timepicker-addon.js
-rw-r--r-- 1 root nginx 53K Mar 14 08:08 jquery.validate.js
drwxr-sr-x 3 root nginx 4.0K Mar 14 08:08 jstree
Performance Dashboard Extension
Upgrading Magento 2 can also be done via command line as per instructions outlined in official documentation.
Also added checks if Varnish & Redis cache are in play as per setup in this guide to restart Varnish Cache and flush Redis caches.
vhostname=magento.domain.com
WEBROOT="/home/nginx/domains/${vhostname}/public"
cd $WEBROOT
php $WEBROOT/bin/magento maintenance:enable
composer require magento/product-community-edition 2.2.3 --no-update
composer update
rm -rf $WEBROOT/var/cache/*
rm -rf $WEBROOT/var/page_cache/*
rm -rf $WEBROOT/generated/code/*
php $WEBROOT/bin/magento setup:upgrade
php $WEBROOT/bin/magento setup:static-content:deploy -f
php $WEBROOT/bin/magento setup:di:compile
#composer dump-autoload -o
php $WEBROOT/bin/magento cache:clean
php $WEBROOT/bin/magento cache:flush
php $WEBROOT/bin/magento cache:status
php $WEBROOT/bin/magento cache:disable
php $WEBROOT/bin/magento cache:enable
php $WEBROOT/bin/magento cache:flush full_page
php $WEBROOT/bin/magento maintenance:disable
php $WEBROOT/bin/magento deploy:mode:set production
chown -R nginx:nginx "/home/nginx/domains/${vhostname}/public"
service nginx restart
if [ -f "$(which varnishadm)" ]; then service varnish restart; fi
if [ -f "$(which redis-cli)" ]; then redis-cli -n 12 FLUSHALL; redis-cli -n 13 FLUSHALL; redis-cli -n 14 FLUSHALL; fi
specific commands' example output
composer update
Do not run Composer as root/super user! See https://getcomposer.org/root for details
Loading composer repositories with package information
Updating dependencies (including require-dev)
Package operations: 0 installs, 30 updates, 0 removals
- Updating tedivm/jshrink (v1.2.0 => v1.3.0): Loading from cache
- Updating magento/framework (101.0.2 => 101.0.3): Loading from cache
- Updating magento/module-config (101.0.2 => 101.0.3): Loading from cache
- Updating magento/module-backend (100.2.2 => 100.2.3): Loading from cache
- Updating magento/module-ui (101.0.2 => 101.0.3): Loading from cache
- Updating magento/module-variable (100.2.1 => 100.2.2): Loading from cache
- Updating magento/module-catalog (102.0.2 => 102.0.3): Loading from cache
- Updating magento/module-eav (101.0.1 => 101.0.2): Loading from cache
- Updating magento/module-customer (101.0.2 => 101.0.3): Loading from cache
- Updating magento/module-reports (100.2.2 => 100.2.3): Loading from cache
- Updating magento/module-tax (100.2.2 => 100.2.3): Loading from cache
- Updating magento/module-shipping (100.2.2 => 100.2.3): Loading from cache
- Updating magento/module-directory (100.2.1 => 100.2.2): Loading from cache
- Updating magento/module-theme (100.2.2 => 100.2.3): Loading from cache
- Updating magento/module-cms (102.0.2 => 102.0.3): Loading from cache
- Updating magento/module-checkout (100.2.2 => 100.2.3): Loading from cache
- Updating magento/module-downloadable (100.2.1 => 100.2.2): Loading from cache
- Updating magento/module-newsletter (100.2.1 => 100.2.2): Loading from cache
- Updating magento/module-review (100.2.2 => 100.2.3): Loading from cache
- Updating magento/module-import-export (100.2.2 => 100.2.3): Loading from cache
- Updating magento/module-backup (100.2.1 => 100.2.2): Loading from cache
- Updating magento/module-usps (100.2.0 => 100.2.1): Loading from cache
- Updating magento/module-configurable-product (100.2.2 => 100.2.3): Loading from cache
- Updating braintree/braintree_php (3.25.0 => 3.27.0): Loading from cache
- Updating magento/module-braintree (100.2.2 => 100.2.3): Loading from cache
- Updating ramsey/uuid (3.7.1 => 3.7.3): Loading from cache
- Updating tubalmartin/cssmin (v4.1.0 => v4.1.1): Loading from cache
- Updating colinmollenhour/cache-backend-redis (1.10.2 => 1.10.4): Loading from cache
- Updating magento/magento2-base (2.2.2 => 2.2.3): Loading from cache
Package sjparkinson/static-review is abandoned, you should avoid using it. Use phpro/grumphp instead.
Writing lock file
Generating autoload files
php $WEBROOT/bin/magento setup:static-content:deploy -f
Deploy using quick strategy
frontend/Magento/blank/en_US 2108/2108 ============================ 100% % 13 secs
adminhtml/Magento/backend/en_US 2105/2105 ============================ 100% % 15 secs
frontend/Magento/luma/en_US 2124/2124 ============================ 100% % 15 secs
Execution time: 65.690301895142
php $WEBROOT/bin/magento setup:di:compile
Compilation was started.
Interception cache generation... 7/7 [============================] 100% 1 min 196.0 MiB
Generated code and dependency injection configuration successfully.
Unfortunately, running into a problem in that all reported Magento 2 caches are reported as disabled in admin area GUI but command line says they're all enabled (set to 1) ? After a few cache flushes and switching between production and developer mode, and finally back to production mode, then the admin are GUI showed all caches as enabled ?
vhostname=magento.domain.com
WEBROOT="/home/nginx/domains/${vhostname}/public"
cd $WEBROOT
php $WEBROOT/bin/magento indexer:show-mode
php $WEBROOT/bin/magento deploy:mode:show
n98-magerun2 cache:list --skip-root-check
n98-magerun2 sys:check --skip-root-check
n98-magerun2 sys:info --skip-root-check
n98-magerun2 cache:list --skip-root-check
Magento Cache Types
------------------------ -------------------------------- ---------
| Name | Type | Enabled |
------------------------ -------------------------------- ---------
| config | Configuration | 1 |
| layout | Layouts | 1 |
| block_html | Blocks HTML output | 1 |
| collections | Collections Data | 1 |
| reflection | Reflection Data | 1 |
| db_ddl | Database DDL operations | 1 |
| eav | EAV types and attributes | 1 |
| customer_notification | Customer Notification | 1 |
| config_integration | Integrations Configuration | 1 |
| config_integration_api | Integrations API Configuration | 1 |
| full_page | Page Cache | 1 |
| translate | Translations | 1 |
| config_webservice | Web Services Configuration | 1 |
------------------------ -------------------------------- ---------
n98-magerun2 cache:status --skip-root-check
Current status:
config: 1
layout: 1
block_html: 1
collections: 1
reflection: 1
db_ddl: 1
eav: 1
customer_notification: 1
config_integration: 1
config_integration_api: 1
full_page: 1
translate: 1
config_webservice: 1
n98-magerun2 sys:info --skip-root-check
Magento System Information
------------------ -----------------------------------------------
| name | value |
------------------ -----------------------------------------------
| Name | Magento |
| Version | 2.2.3 |
| Edition | Community |
| Root | /home/nginx/domains/magento.domain.com/public |
| Application Mode | production |
| Session | redis |
| Crypt Key | d45f000b87ce82****************** |
| Install Date | Sun, 11 Mar 2018 20:40:12 0000 |
| Cache Backend | Cm_Cache_Backend_Redis |
| Vendors | Magento, MageHost, Dotdigitalgroup, Temando |
| Attribute Count | 134 |
| Customer Count | 0 |
| Category Count | 2 |
| Product Count | 0 |
------------------ -----------------------------------------------
Quick WebPageTest.org test. Check out my guide on How to use webpagetest.org for page load speed testing.
Default Magento 2.2.2 theme has up to 168 HTTP requests of which 144 are Javascript assets even with CSS and JS merged files enabled ! Javascript bundling is disabled by default.
Update: added a Magento 2 Bugs of which one bug already affects Magento 2.2.2 causing high MySQL / PHP related loads so may of affected benchmarks too. I have 428 pending cron sheduled jobs.
n98-magerun2 db:query "SELECT * FROM mags_cron_schedule WHERE status='pending';" --skip-root-check | wc -l
428
Redis server can be configured to default TCP mode or you can take advantage of using both TCP mode Unix Socket modes so configure web apps that support Unix Socket to use that whike keaving web apps that only support TCP mode to use that. From my experience which Unix Sockets maybe faster, they don't scale in terms of higher concurrency load levels as TCP connections.
Quick benchmarks are below of Redis caching TCP vs Unix Socket using my custom forked wrk-cmm load testing tool. Pay particular attention to latency distribution at 99% percentile mark and requests/sec and thread stats for Time To First Byte (TTFB) differences. Below wrk-cmm tests were lightl testing with 2 threads and 2 concurrent users over 10 second duration and testing for gzip encoded compressed HTTP requests.
Current Magento System Info
n98-magerun2 sys:info --skip-root-check
Magento System Information
------------------ -----------------------------------------------
| name | value |
------------------ -----------------------------------------------
| Name | Magento |
| Version | 2.2.2 |
| Edition | Community |
| Root | /home/nginx/domains/magento.domain.com/public |
| Application Mode | production |
| Session | redis |
| Crypt Key | d45f000b87ce82******************* |
| Install Date | Sun, 11 Mar 2018 20:40:12 0000 |
| Cache Backend | Cm_Cache_Backend_Redis |
| Vendors | Magento, MageHost, Dotdigitalgroup, Temando |
| Attribute Count | 134 |
| Customer Count | 0 |
| Category Count | 2 |
| Product Count | 0 |
------------------ -----------------------------------------------
Redis TCP Mode
redisserver=127.0.0.1
# lz4 or gzip
compresstype=lz4
port=6379
php $WEBROOT/bin/magento setup:config:set --cache-backend=redis --cache-backend-redis-server=$redisserver --cache-backend-redis-db=12 --cache-backend-redis-port=$port
php $WEBROOT/bin/magento setup:config:set --page-cache=redis --page-cache-redis-server=$redisserver --page-cache-redis-db=13 --page-cache-redis-compress-data=$compresstype --page-cache-redis-port=$port
php $WEBROOT/bin/magento setup:config:set --session-save=redis --session-save-redis-host=$redisserver --session-save-redis-log-level=3 --session-save-redis-db=14 --session-save-redis-compression-lib=$compresstype --session-save-redis-max-concurrency=4 --session-save-redis-first-lifetime=600 --session-save-redis-bot-first-lifetime=60 --session-save-redis-bot-lifetime=7200 --session-save-redis-min-lifetime=60 --session-save-redis-max-lifetime=2592000 --session-save-redis-break-after-frontend=60 --session-save-redis-break-after-adminhtml=60 --session-save-redis-port=$port
php $WEBROOT/bin/magento setup:static-content:deploy
php $WEBROOT/bin/magento setup:di:compile
composer dump-autoload -o
# ensure correct Centmin Mod Nginx permissions
chown -R nginx:nginx "/home/nginx/domains/${vhostname}/public"
domain=https://magento.domain.com
wrk-cmm -t2 -c2 -d10s --breakout -H 'Accept-Encoding: gzip' -s scripts/setup.lua --latency $domain
thread 1 created
thread 2 created
Running 10s test @ https://magento.domain.com
2 threads and 2 connections
Thread Stats Avg Stdev Max /- Stdev
Latency 31.15ms 10.16ms 158.71ms 97.59%
Connect 14.00ms 5.32ms 17.76ms 100.00%
TTFB 30.83ms 10.10ms 158.42ms 97.89%
TTLB 316.32us 266.73us 4.59ms 97.25%
Req/Sec 32.83 5.93 40.00 62.63%
Latency Distribution
50% 29.45ms
75% 31.67ms
90% 35.71ms
99% 80.05ms
655 requests in 10.06s, 4.64MB read
Requests/sec: 65.14
Transfer/sec: 472.44KB
thread 1 made 330 requests and got 328 responses
thread 2 made 328 requests and got 327 responses
Redis Unix socket Mode
redisserver=/var/run/redis/redis.sock
# lz4 or gzip
compresstype=lz4
port=0
php $WEBROOT/bin/magento setup:config:set --cache-backend=redis --cache-backend-redis-server=$redisserver --cache-backend-redis-db=12 --cache-backend-redis-port=$port
php $WEBROOT/bin/magento setup:config:set --page-cache=redis --page-cache-redis-server=$redisserver --page-cache-redis-db=13 --page-cache-redis-compress-data=$compresstype --page-cache-redis-port=$port
php $WEBROOT/bin/magento setup:config:set --session-save=redis --session-save-redis-host=$redisserver --session-save-redis-log-level=3 --session-save-redis-db=14 --session-save-redis-compression-lib=$compresstype --session-save-redis-max-concurrency=4 --session-save-redis-first-lifetime=600 --session-save-redis-bot-first-lifetime=60 --session-save-redis-bot-lifetime=7200 --session-save-redis-min-lifetime=60 --session-save-redis-max-lifetime=2592000 --session-save-redis-break-after-frontend=60 --session-save-redis-break-after-adminhtml=60 --session-save-redis-port=$port
php $WEBROOT/bin/magento setup:static-content:deploy
php $WEBROOT/bin/magento setup:di:compile
composer dump-autoload -o
# ensure correct Centmin Mod Nginx permissions
chown -R nginx:nginx "/home/nginx/domains/${vhostname}/public"
domain=https://magento.domain.com
wrk-cmm -t2 -c2 -d10s --breakout -H 'Accept-Encoding: gzip' -s scripts/setup.lua --latency $domain
thread 1 created
thread 2 created
Running 10s test @ https://magento.domain.com
2 threads and 2 connections
Thread Stats Avg Stdev Max /- Stdev
Latency 29.77ms 9.12ms 134.42ms 96.97%
Connect 9.30ms 4.76ms 12.67ms 100.00%
TTFB 29.46ms 9.08ms 134.08ms 96.97%
TTLB 306.88us 212.53us 2.83ms 97.51%
Req/Sec 34.26 6.07 40.00 97.47%
Latency Distribution
50% 28.09ms
75% 30.42ms
90% 33.51ms
99% 75.62ms
684 requests in 10.05s, 4.84MB read
Requests/sec: 68.04
Transfer/sec: 493.39KB
thread 1 made 342 requests and got 340 responses
thread 2 made 345 requests and got 344 responses
Magento 2 Redis caching still has to go through Nginx and PHP-FPM to be processed so there is still PHP-FPM load to deal with it seems. So looks like Varnish Caching for Magento 2 full page caching would be a better option. Varnish Cache added HTTP/2 support in 5.0 but isn't enabled out of box and Varnish HTTP/2 support is still work in progress with Varnish Cache 5.1, 5.2 details.
During wrk-cmm load testing run top stats.
top -c
top - 10:04:41 up 1:14, 2 users, load average: 1.15, 0.94, 0.82
Tasks: 119 total, 20 running, 99 sleeping, 0 stopped, 0 zombie
%Cpu0 : 81.6 us, 16.4 sy, 0.0 ni, 0.3 id, 0.0 wa, 0.0 hi, 1.6 si, 0.0 st
%Cpu1 : 79.5 us, 18.5 sy, 0.0 ni, 0.3 id, 0.0 wa, 0.0 hi, 1.7 si, 0.0 st
%Cpu2 : 77.6 us, 20.1 sy, 0.0 ni, 0.3 id, 0.0 wa, 0.0 hi, 2.0 si, 0.0 st
%Cpu3 : 76.9 us, 20.8 sy, 0.0 ni, 0.0 id, 0.0 wa, 0.0 hi, 2.3 si, 0.0 st
KiB Mem : 3881428 total, 2639780 free, 517272 used, 724376 buff/cache
KiB Swap: 4194300 total, 4194300 free, 0 used. 3022348 avail Mem
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME COMMAND
760 redis 20 0 186324 7524 1552 R 32.6 0.2 0:25.46 redis-server
11543 nginx 10 -10 157724 45128 2300 S 20.0 1.2 0:12.43 nginx
13033 nginx 20 0 918384 27584 14580 R 20.0 0.7 0:01.47 php-fpm
13027 nginx 20 0 918384 27576 14572 R 19.0 0.7 0:01.56 php-fpm
13035 nginx 20 0 918384 27580 14576 R 18.7 0.7 0:01.59 php-fpm
13032 nginx 20 0 918384 27580 14576 R 18.4 0.7 0:01.52 php-fpm
13021 nginx 20 0 918480 27688 14588 R 18.1 0.7 0:02.20 php-fpm
13031 nginx 20 0 918384 27580 14576 R 18.1 0.7 0:01.48 php-fpm
13026 nginx 20 0 918384 27580 14576 R 17.7 0.7 0:01.85 php-fpm
13029 nginx 20 0 918384 27576 14572 R 17.7 0.7 0:01.68 php-fpm
13030 nginx 20 0 918384 27580 14576 R 17.7 0.7 0:01.58 php-fpm
13036 nginx 20 0 918384 27580 14576 S 17.7 0.7 0:01.48 php-fpm
13022 nginx 20 0 918384 27580 14576 R 17.4 0.7 0:02.20 php-fpm
13023 nginx 20 0 918420 27620 14584 R 17.4 0.7 0:02.07 php-fpm
13025 nginx 20 0 918384 27576 14576 R 17.4 0.7 0:02.26 php-fpm
13034 nginx 20 0 918384 27580 14576 R 17.4 0.7 0:01.49 php-fpm
13024 nginx 20 0 918468 27684 14588 R 17.1 0.7 0:02.28 php-fpm
13028 nginx 20 0 918384 27576 14572 R 16.5 0.7 0:01.61 php-fpm
11545 nginx 10 -10 153628 44512 2284 S 16.1 1.1 0:08.60 nginx
11547 nginx 10 -10 157724 44672 2224 R 14.8 1.2 0:10.76 nginx
11544 nginx 10 -10 153628 44512 2264 R 10.6 1.1 0:09.73 nginx
13018 root 20 0 307660 8072 2360 S 6.8 0.2 0:00.57 wrk-cmm
Benchmarks with Redis caching disabled and switching caching to file based so only slightly less performance that Redis caching in terms of average throughput at 60 requests/s versus 65-68 requests/s with Redis caching. But 99% percentile latency response times were much slower with file based caching at 292 ms vs 75-80ms with Redis caching. Thread TTFB latency max was also much higher with file based caching at 357 ms versus Redis cached thread TTFB latency at 134-158 ms.
wrk-cmm -t2 -c2 -d10s --breakout -H 'Accept-Encoding: gzip' -s scripts/setup.lua --latency $domain
thread 1 created
thread 2 created
Running 10s test @ https://magento.domain.com
2 threads and 2 connections
Thread Stats Avg Stdev Max /- Stdev
Latency 39.78ms 43.07ms 357.86ms 95.21%
Connect 15.02ms 1.14ms 15.83ms 100.00%
TTFB 39.35ms 42.99ms 357.27ms 95.22%
TTLB 426.65us 153.00us 3.21ms 90.85%
Req/Sec 31.85 7.32 40.00 64.74%
Latency Distribution
50% 29.49ms
75% 31.51ms
90% 39.24ms
99% 292.20ms
612 requests in 10.05s, 4.33MB read
Requests/sec: 60.92
Transfer/sec: 441.84KB
thread 1 made 315 requests and got 313 responses
thread 2 made 300 requests and got 299 responses
Set session-save to files based
php $WEBROOT/bin/magento setup:config:set --session-save=files
Then manually remove app/etc/env.php
entries for Redis backend and full page caching
'cache' =>
array (
'frontend' =>
array (
'default' =>
array (
'backend' => 'Cm_Cache_Backend_Redis',
'backend_options' =>
array (
'server' => '127.0.0.1',
'database' => '12',
'port' => '6379',
),
),
'page_cache' =>
array (
'backend' => 'Cm_Cache_Backend_Redis',
'backend_options' =>
array (
'server' => '127.0.0.1',
'database' => '13',
'port' => '6379',
'compress_data' => 'lz4',
),
),
),
),
Then run
php $WEBROOT/bin/magento cache:flush
php $WEBROOT/bin/magento deploy:mode:set production
chown -R nginx:nginx "/home/nginx/domains/magento.domain.com/public"
n98-magerun2 sys:info --skip-root-check
Magento System Information
------------------ -----------------------------------------------
| name | value |
------------------ -----------------------------------------------
| Name | Magento |
| Version | 2.2.2 |
| Edition | Community |
| Root | /home/nginx/domains/magento.domain.com/public |
| Application Mode | production |
| Session | files |
| Crypt Key | d45f000b87ce82******************* |
| Install Date | Sun, 11 Mar 2018 20:40:12 0000 |
| Cache Backend | Cm_Cache_Backend_File |
| Vendors | Magento, MageHost, Dotdigitalgroup, Temando |
| Attribute Count | 134 |
| Customer Count | 0 |
| Category Count | 2 |
| Product Count | 0 |
------------------ -----------------------------------------------
file based full page caching
ls -lahrt var/page_cache/mage--3/
total 48K
drwxrwsr-x. 5 nginx nginx 4.0K Mar 13 13:29 ..
drwxrwxrwx 2 nginx nginx 4.0K Mar 13 13:29 .
-rw-rw---- 1 nginx nginx 38K Mar 13 13:29 mage---495_FD9FFAEA25F37BB543E29CD5BBAB6A81BF0BA03
file based session caching
ls -lhrt var/session/ | tail -10
-rw------- 1 nginx nginx 157 Mar 13 13:25 sess_lfqapeotn2u03plhj6h0kdqeb6
-rw------- 1 nginx nginx 157 Mar 13 13:26 sess_i6uamdosufdodse1l4olkrr5q0
-rw------- 1 nginx nginx 157 Mar 13 13:27 sess_9dc14co3me6eq7lkbjtgaf03im
-rw------- 1 nginx nginx 157 Mar 13 13:28 sess_kf1bgo6hgaletafdia83or4b4f
-rw------- 1 nginx nginx 157 Mar 13 13:29 sess_5cd5jvoouvn7hv9giro95t5h5s
-rw------- 1 nginx nginx 607 Mar 13 13:29 sess_fu48njb7u7eu4qj6qvjof8ktsv
-rw------- 1 nginx nginx 157 Mar 13 13:30 sess_2s8os32p7rmd74n7rn0e4doenf
-rw------- 1 nginx nginx 157 Mar 13 13:31 sess_ri4j18hb9vdvbav1pj4meg3l8p
-rw------- 1 nginx nginx 157 Mar 13 13:32 sess_rf82e1tn0ppp2597rbm3304v2i
-rw------- 1 nginx nginx 157 Mar 13 13:33 sess_lvupdn2j6m49mib8ra8nraft01
comparing app/etc/env.php
file based caching versus app/etc/env.php.redisset
with Redis session, backend and full page caching
diff -u app/etc/env.php app/etc/env.php.redisset
--- app/etc/env.php 2018-03-13 13:25:50.794181470 0000
app/etc/env.php.redisset 2018-03-13 05:30:56.948206383 0000
@@ -37,7 37,28 @@
'MAGE_MODE' => 'production',
'session' =>
array (
- 'save' => 'files',
'save' => 'redis',
'redis' =>
array (
'host' => '127.0.0.1',
'port' => '6379',
'password' => '',
'timeout' => '2.5',
'persistent_identifier' => '',
'database' => '14',
'compression_threshold' => '2048',
'compression_library' => 'lz4',
'log_level' => '3',
'max_concurrency' => '4',
'break_after_frontend' => '60',
'break_after_adminhtml' => '60',
'first_lifetime' => '600',
'bot_first_lifetime' => '60',
'bot_lifetime' => '7200',
'disable_locking' => '0',
'min_lifetime' => '60',
'max_lifetime' => '2592000',
),
),
'cache_types' =>
array (
@@ -60,6 81,33 @@
array (
'date' => 'Sun, 11 Mar 2018 20:40:12 0000',
),
'cache' =>
array (
'frontend' =>
array (
'default' =>
array (
'backend' => 'Cm_Cache_Backend_Redis',
'backend_options' =>
array (
'server' => '127.0.0.1',
'database' => '12',
'port' => '6379',
),
),
'page_cache' =>
array (
'backend' => 'Cm_Cache_Backend_Redis',
'backend_options' =>
array (
'server' => '127.0.0.1',
'database' => '13',
'port' => '6379',
'compress_data' => 'lz4',
),
),
),
),
'system' =>
array (
'default' =>
comparing app/etc/env.php.redisset
with Redis session, backend and full page caching versus app/etc/env.php
file based caching
diff -u app/etc/env.php.redisset app/etc/env.php
--- app/etc/env.php.redisset 2018-03-13 05:30:56.948206383 0000
app/etc/env.php 2018-03-13 13:25:50.794181470 0000
@@ -37,28 37,7 @@
'MAGE_MODE' => 'production',
'session' =>
array (
- 'save' => 'redis',
- 'redis' =>
- array (
- 'host' => '127.0.0.1',
- 'port' => '6379',
- 'password' => '',
- 'timeout' => '2.5',
- 'persistent_identifier' => '',
- 'database' => '14',
- 'compression_threshold' => '2048',
- 'compression_library' => 'lz4',
- 'log_level' => '3',
- 'max_concurrency' => '4',
- 'break_after_frontend' => '60',
- 'break_after_adminhtml' => '60',
- 'first_lifetime' => '600',
- 'bot_first_lifetime' => '60',
- 'bot_lifetime' => '7200',
- 'disable_locking' => '0',
- 'min_lifetime' => '60',
- 'max_lifetime' => '2592000',
- ),
'save' => 'files',
),
'cache_types' =>
array (
@@ -81,33 60,6 @@
array (
'date' => 'Sun, 11 Mar 2018 20:40:12 0000',
),
- 'cache' =>
- array (
- 'frontend' =>
- array (
- 'default' =>
- array (
- 'backend' => 'Cm_Cache_Backend_Redis',
- 'backend_options' =>
- array (
- 'server' => '127.0.0.1',
- 'database' => '12',
- 'port' => '6379',
- ),
- ),
- 'page_cache' =>
- array (
- 'backend' => 'Cm_Cache_Backend_Redis',
- 'backend_options' =>
- array (
- 'server' => '127.0.0.1',
- 'database' => '13',
- 'port' => '6379',
- 'compress_data' => 'lz4',
- ),
- ),
- ),
- ),
'system' =>
array (
'default' =>
Magento folks recommend that Varnish Cache be used for full page caching instead of Redis full page caching as outlined at Varnish Cache based full page caching. We'll need to configure Varnish Cache 5.2.x with HTTP/2 support proxying to a non-HTTPS magento.domain.com
backend. For terminating HTTPS connections using Centmin Mod Nginx HTTP/2 HTTPS as reverse proxy in front of Varnish Cache as Varnish Cache can't fully handle HTTPS itself. The work flow looks like this:
Visitor > Nginx HTTP/2 HTTPS Proxy > Varnish Cache HTTP/2 Enabled > Nginx non-HTTPS backend
Centmin Mod 123.09beta01 branch automatically adds the official Varnish Cache 4.1 branch YUM repo. So this needs to be disabled first.
yum-config-manager --disable varnishcache_varnish41 varnishcache_varnish41-source
Then Varnish Cache 5 YUM repository needs to be installed and setup as per outlined instructions here.
curl -s https://packagecloud.io/install/repositories/varnishcache/varnish5/script.rpm.sh | sudo bash
List the Varnish Cache YUM package
yum list varnish --disablerepo=epel
Loaded plugins: fastestmirror, priorities, versionlock
Loading mirror speeds from cached hostfile
* base: mirror.nodesdirect.com
* extras: www.gtlib.gatech.edu
* rpmforge: mirror.us.leaseweb.net
* updates: mirror.trouble-free.net
27 packages excluded due to repository priority protections
Available Packages
varnish.x86_64 5.2.1-1.el7 varnishcache_varnish5
Install and setup Varnish Cache with HTTP/2 support enabled so it can read HTTP/2 in clear plain text with Varnish Cache listening off default 6081 port and setup Varnish backend port on Nginx non-HTTPS backend port 8686 which will be setup further below. I will be using Magento 2.2.2 exported Varnish default.vcl config file with slight modifications (here) which I usually make to my Varnish Cache setups i.e. support Brotli compression when detected etc.
yum -y install varnish --disablerepo=epel
mkdir -p /etc/systemd/system/varnish.service.d
echo -en "[Service]\nLimitNOFILE=262144\nLimitSTACK=262144\n" > /etc/systemd/system/varnish.service.d/limit.conf
\cp -af /etc/varnish/varnish.params /etc/varnish/varnish.params.orig
\cp -af /etc/varnish/default.vcl /etc/varnish/default.vcl.orig
wget -O /etc/varnish/default.vcl https://github.com/centminmod/centminmod-magento2/raw/master/vcl/varnish5/varnish-custom.vcl
sed -i 's|port = "8080";|port = "8686";|' /etc/varnish/default.vcl
sed -i 's|/pub/health_check.php|/health_check.php|' /etc/varnish/default.vcl
sed -i '/DAEMON_OPTS/d' /etc/varnish/varnish.params
echo "DAEMON_OPTS=\"-p feature= http2 -p thread_pools=2 -p thread_pool_add_delay=0.02 -p listen_depth=4096 -p lru_interval=2 -p cli_timeout=10 -p thread_pool_min=500 -p thread_pool_max=1500 -p thread_pool_timeout=300 -p tcp_fastopen=on -p http_resp_hdr_len=65536 -p http_resp_size=98304 -p workspace_backend=262144 -p workspace_client=262144 -p workspace_session=262144 -p workspace_thread=2048\"" >> /etc/varnish/varnish.params
cat /etc/systemd/system/varnish.service.d/limit.conf
cat /etc/varnish/varnish.params
systemctl daemon-reload
systemctl start varnish
systemctl status varnish
journalctl -u varnish --no-pager
varnishd -V
varnishd (varnish-5.2.1 revision 67e562482)
Copyright (c) 2006 Verdens Gang AS
Copyright (c) 2006-2015 Varnish Software AS
Below setup assumes we have configured Varnish Cache 5.x listening on port 6081 default using the Magento geenerated and exported Varnish 5 default.vcl. Which will eventually communicate with backend port for Nginx created vhost file magento.domain.com.backend.conf
on port 8686 and defined in /usr/local/nginx/conf/proxycache_map.conf
upstream.
within /etc/varnish/default.vcl
backend default {
.host = "localhost";
.port = "8686";
vhostname=magento.domain.com
WEBROOT="/home/nginx/domains/${vhostname}/public"
php $WEBROOT/bin/magento setup:store-config:set --base-url="http://${vhostname}/"
php $WEBROOT/bin/magento setup:store-config:set --base-url-secure="https://${vhostname}/"
php $WEBROOT/bin/magento cache:flush
check settings
n98-magerun2 sys:store:config:base-url:list --skip-root-check
Magento Stores - Base URLs
---- --------- ---------------------------- -----------------------------
| id | code | unsecure_baseurl | secure_baseurl |
---- --------- ---------------------------- -----------------------------
| 1 | default | http://magento.domain.com/ | https://magento.domain.com/ |
---- --------- ---------------------------- -----------------------------
php $WEBROOT/bin/magento config:show
web/seo/use_rewrites - 1
web/unsecure/base_url - http://magento.domain.com/
web/secure/base_url - https://magento.domain.com/
web/secure/use_in_adminhtml - 1
web/secure/use_in_frontend - 1
general/locale/code - en_US
general/locale/timezone - America/Chicago
general/region/display_all - 1
general/region/state_required - AT,BR,CA,CH,EE,ES,FI,HR,LT,LV,RO,US
currency/options/base - USD
currency/options/default - USD
currency/options/allow - USD
catalog/category/root_id - 2
catalog/frontend/flat_catalog_category - 1
catalog/frontend/flat_catalog_product - 1
analytics/subscription/enabled - 1
analytics/general/token - kE4qU4IDX5qXxDRCbtmZSu_mC1m0dGW011J1wMlAIfuCAz_jkWROOWuzB6_Cqd3lDHqYHP-0OU8CywoI3tWozA
system/full_page_cache/caching_application - 1
system/full_page_cache/ttl - 86400
system/full_page_cache/varnish/access_list - localhost
system/full_page_cache/varnish/backend_host - localhost
system/full_page_cache/varnish/backend_port - 8080
system/full_page_cache/varnish/grace_period - 300
dev/grid/async_indexing - 1
dev/js/merge_files - 1
dev/css/merge_css_files - 1
dev/debug/debug_logging - 0
sales_email/general/async_sending - 1
This can be done by using the previously disabled Nginx vhost file magento.domain.com.conf.disabled
and making a backend copy to edit
cd /usr/local/nginx/conf/conf.d
cp -a magento.domain.com.conf.disabled magento.domain.com.backend.conf
Modifying the vhost file to replicate the Magento rules and use a custom backend port 8686 which Varnish Cache will proxy and editing custom access_log and error_log paths.
Also need to adjust $scheme
to https
add_header Link "<$scheme://$http_host$request_uri>; rel=\"canonical\"" always;
add_header Link "<https://$http_host$request_uri>; rel=\"canonical\"" always;
fully adjusted /usr/local/nginx/conf/conf.d/magento.domain.com.backend.conf
contents below:
server {
listen 8686 backlog=2048 reuseport;
server_name magento.domain.com;
# ngx_pagespeed & ngx_pagespeed handler
#include /usr/local/nginx/conf/pagespeed.conf;
#include /usr/local/nginx/conf/pagespeedhandler.conf;
#include /usr/local/nginx/conf/pagespeedstatslog.conf;
#add_header X-Frame-Options SAMEORIGIN;
#add_header X-Xss-Protection "1; mode=block" always;
#add_header X-Content-Type-Options "nosniff" always;
#add_header Referrer-Policy "strict-origin-when-cross-origin";
# limit_conn limit_per_ip 16;
# ssi on;
access_log /home/nginx/domains/magento.domain.com/log/access.backend.log combined buffer=256k flush=5m;
error_log /home/nginx/domains/magento.domain.com/log/error.backend.log;
#include /usr/local/nginx/conf/autoprotect/magento.domain.com/autoprotect-magento.domain.com.conf;
set $MAGE_ROOT /home/nginx/domains/magento.domain.com/public;
root $MAGE_ROOT/pub;
include /usr/local/nginx/conf/503include-main.conf;
index index.php;
autoindex off;
charset UTF-8;
error_page 404 403 = /errors/404.php;
#add_header "X-UA-Compatible" "IE=Edge";
# PHP entry point for setup application
location ~* ^/setup($|/) {
root $MAGE_ROOT;
location ~ ^/setup/index.php {
include /usr/local/nginx/conf/php.conf;
}
location ~ ^/setup/(?!pub/). {
deny all;
}
location ~ ^/setup/pub/ {
add_header X-Frame-Options "SAMEORIGIN";
}
}
# PHP entry point for update application
location ~* ^/update($|/) {
root $MAGE_ROOT;
location ~ ^/update/index.php {
fastcgi_split_path_info ^(/update/index.php)(/. )$;
include /usr/local/nginx/conf/php_magento.conf;
}
# Deny everything but index.php
location ~ ^/update/(?!pub/). {
deny all;
}
location ~ ^/update/pub/ {
add_header X-Frame-Options "SAMEORIGIN";
}
}
location / {
include /usr/local/nginx/conf/503include-only.conf;
try_files $uri $uri/ /index.php$is_args$args;
}
location /pub/ {
location ~ ^/pub/media/(downloadable|customer|import|theme_customization/.*\.xml) {
deny all;
}
alias $MAGE_ROOT/pub/;
add_header X-Frame-Options "SAMEORIGIN";
}
location /static/ {
# Uncomment the following line in production mode
expires max;
# Remove signature of the static files that is used to overcome the browser cache
location ~ ^/static/version {
rewrite ^/static/(version\d*/)?(.*)$ /static/$2 last;
}
location ~* \.(ico|jpg|jpeg|png|gif|svg|js|css)$ {
add_header Cache-Control "public";
add_header Access-Control-Allow-Origin *;
add_header X-Frame-Options "SAMEORIGIN";
expires 30d;
if (!-f $request_filename) {
rewrite ^/static/?(.*)$ /static.php?resource=$1 last;
}
}
location ~* \.(swf|eot|ttf|otf|woff|woff2)$ {
add_header Cache-Control "public";
add_header Access-Control-Allow-Origin *;
add_header X-Frame-Options "SAMEORIGIN";
expires 1y;
if (!-f $request_filename) {
rewrite ^/static/?(.*)$ /static.php?resource=$1 last;
}
}
location ~* \.(zip|gz|gzip|bz2|csv|xml)$ {
add_header Cache-Control "no-store";
add_header X-Frame-Options "SAMEORIGIN";
expires off;
if (!-f $request_filename) {
rewrite ^/static/?(.*)$ /static.php?resource=$1 last;
}
}
if (!-f $request_filename) {
rewrite ^/static/?(.*)$ /static.php?resource=$1 last;
}
add_header X-Frame-Options "SAMEORIGIN";
}
location /media/ {
try_files $uri $uri/ /get.php$is_args$args;
location ~ ^/media/theme_customization/.*\.xml {
deny all;
}
location ~* \.(ico|jpg|jpeg|png|gif|svg|js|css)$ {
add_header Cache-Control "public";
add_header Access-Control-Allow-Origin *;
add_header X-Frame-Options "SAMEORIGIN";
expires 30d;
try_files $uri $uri/ /get.php$is_args$args;
}
location ~* \.(swf|eot|ttf|otf|woff|woff2)$ {
add_header Cache-Control "public";
add_header Access-Control-Allow-Origin *;
add_header X-Frame-Options "SAMEORIGIN";
expires 1y;
try_files $uri $uri/ /get.php$is_args$args;
}
location ~* \.(zip|gz|gzip|bz2|csv|xml)$ {
add_header Cache-Control "no-store";
add_header X-Frame-Options "SAMEORIGIN";
expires off;
try_files $uri $uri/ /get.php$is_args$args;
}
add_header X-Frame-Options "SAMEORIGIN";
}
location /media/customer/ {
deny all;
}
location /media/downloadable/ {
deny all;
}
location /media/import/ {
deny all;
}
# Deny cron and files with the obvious names. favorite entry points for hackers and script kiddie
location ~* ^/(cron|phpminiadmin|pma|sqlyog|adminer. )\.php { deny all; }
# Deny auth and composer
location ~ (auth|package|composer)\.(json|lock)$ { deny all; }
# PHP entry point for main application
location ~ (index|get|static|report|404|503|health_check)\.php$ {
try_files $uri =404;
add_header X-Processing-Time $request_time always;
add_header X-Request-ID $request_id always;
add_header Strict-Transport-Security $mag_hstsheader always;
add_header X-UA-Compatible 'IE=Edge,chrome=1';
add_header Link "<$scheme://$http_host$request_uri>; rel=\"canonical\"" always;
fastcgi_buffers 1024 4k;
fastcgi_param PHP_FLAG "session.auto_start=off \n suhosin.session.cryptua=off";
fastcgi_param PHP_VALUE "memory_limit=4096M \n max_execution_time=18000 \n max_input_time=18000";
fastcgi_read_timeout 600s;
fastcgi_connect_timeout 600s;
include /usr/local/nginx/conf/503include-only.conf;
include /usr/local/nginx/conf/php.conf;
}
# Banned locations (only reached if the earlier PHP entry point regexes don't match)
location ~* (\.php$|\.htaccess$|\.git) {
deny all;
}
include /usr/local/nginx/conf/pre-staticfiles-local-magento.domain.com.conf;
include /usr/local/nginx/conf/pre-staticfiles-global.conf;
#include /usr/local/nginx/conf/staticfiles.conf;
#include /usr/local/nginx/conf/php.conf;
#include /usr/local/nginx/conf/drop.conf;
#include /usr/local/nginx/conf/errorpage.conf;
include /usr/local/nginx/conf/vts_server.conf;
}
Restart Nginx server
service nginx restart
or via Centmin Mod command shortcut
ngxrestart
curl header test for http://magento.domain.com:8686/
curl -Ik http://magento.domain.com:8686/
HTTP/1.1 200 OK
Date: Wed, 14 Mar 2018 07:48:57 GMT
Content-Type: text/html; charset=UTF-8
Connection: keep-alive
Vary: Accept-Encoding
Pragma: no-cache
Cache-Control: max-age=0, must-revalidate, no-cache, no-store
Expires: Tue, 14 Mar 2017 07:48:57 GMT
X-Content-Type-Options: nosniff
X-XSS-Protection: 1; mode=block
X-Frame-Options: SAMEORIGIN
Server: nginx centminmod
X-Powered-By: centminmod
X-Processing-Time: 1.500
X-Request-ID: 90934314e90e859262f427cc05505057
X-UA-Compatible: IE=Edge,chrome=1
Link: <http://magento.domain.com:8686/>; rel="canonical"
Step 4. Modifying Nginx HTTP/2 HTTPS vhost to be a reverse proxy to Varnish Cache backup on port 6081 listening port
Make a backup copying of live Nginx HTTP/2 HTTPS vhost file magento.domain.com.ssl.conf
as magento.domain.com.ssl.conf.backup-b4proxy
cd /usr/local/nginx/conf/conf.d
cp -a magento.domain.com.ssl.conf magento.domain.com.ssl.conf.backup-b4proxy
Modifying magento.domain.com.ssl.conf
vhost file to be a reverse proxy in front of Varnish Cache proxying to backend Varnish Cache listening port 6081
# Centmin Mod Getting Started Guide
# must read http://centminmod.com/getstarted.html
# For HTTP/2 SSL Setup
# read http://centminmod.com/nginx_configure_https_ssl_spdy.html
# redirect from www to non-www forced SSL
# uncomment, save file and restart Nginx to enable
# if unsure use return 302 before using return 301
server {
listen 80;
server_name magento.domain.com www.magento.domain.com;
return 302 https://$server_name$request_uri;
}
server {
listen 443 ssl http2 backlog=2048 reuseport;
server_name magento.domain.com www.magento.domain.com;
ssl_dhparam /usr/local/nginx/conf/ssl/magento.domain.com/dhparam.pem;
ssl_certificate /usr/local/nginx/conf/ssl/magento.domain.com/magento.domain.com.crt;
ssl_certificate_key /usr/local/nginx/conf/ssl/magento.domain.com/magento.domain.com.key;
include /usr/local/nginx/conf/ssl_include.conf;
# cloudflare authenticated origin pull cert community.centminmod.com/threads/13847/
#ssl_client_certificate /usr/local/nginx/conf/ssl/cloudflare/magento.domain.com/origin.crt;
#ssl_verify_client on;
http2_max_field_size 16k;
http2_max_header_size 32k;
# mozilla recommended
ssl_ciphers ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA:ECDHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA:ECDHE-ECDSA-DES-CBC3-SHA:ECDHE-RSA-DES-CBC3-SHA:EDH-RSA-DES-CBC3-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:DES-CBC3-SHA:!DSS;
ssl_prefer_server_ciphers on;
#add_header Alternate-Protocol 443:npn-spdy/3;
# before enabling HSTS line below read centminmod.com/nginx_domain_dns_setup.html#hsts
#add_header Strict-Transport-Security "max-age=31536000; includeSubdomains;";
#add_header X-Frame-Options SAMEORIGIN;
#add_header X-Xss-Protection "1; mode=block" always;
#add_header X-Content-Type-Options "nosniff" always;
#add_header Referrer-Policy "strict-origin-when-cross-origin";
#spdy_headers_comp 5;
ssl_buffer_size 1369;
ssl_session_tickets on;
# enable ocsp stapling
#resolver 8.8.8.8 8.8.4.4 valid=10m;
#resolver_timeout 10s;
#ssl_stapling on;
#ssl_stapling_verify on;
#ssl_trusted_certificate /usr/local/nginx/conf/ssl/magento.domain.com/magento.domain.com-trusted.crt;
# ngx_pagespeed & ngx_pagespeed handler
#include /usr/local/nginx/conf/pagespeed.conf;
#include /usr/local/nginx/conf/pagespeedhandler.conf;
#include /usr/local/nginx/conf/pagespeedstatslog.conf;
# limit_conn limit_per_ip 16;
# ssi on;
access_log /home/nginx/domains/magento.domain.com/log/access.log combined buffer=256k flush=5m;
error_log /home/nginx/domains/magento.domain.com/log/error.log;
set $size_cachebypass 0;
if ($query_string ~* nocache) {
set $size_cachebypass 1;
}
location / {
include /usr/local/nginx/conf/proxycache_magento.domain.com.conf;
proxy_pass http://proxy_backend;
#proxy_bind $split_ip;
#proxy_bind $remote_addr transparent;
}
location /check {
return 200 "Hello from $hostname. You connected from $remote_addr:$remote_port to $server_addr:$server_port\n";
}
}
create /usr/local/nginx/conf/proxycache_magento.domain.com.conf
with contents below setting proxy_cache cache_magento.domain.com
as defined within the soon to be created /usr/local/nginx/conf/proxycache-includes.conf
include file's proxy_cache_path
. Microcaching is setup with proxy_cache_valid
for HTTP 200, 302 and 404 status codes set to TTLS = 3 seconds.
add_header X-Cache-Status $upstream_cache_status;
proxy_cache cache_magento.domain.com;
proxy_cache_key $scheme$proxy_host$uri$is_args$args;
proxy_cache_lock on;
proxy_cache_lock_age 3s;
proxy_cache_lock_timeout 3s;
proxy_cache_revalidate on;
proxy_cache_valid 200 302 3s;
proxy_cache_valid 404 3s;
proxy_cache_min_uses 1;
proxy_ignore_headers Set-Cookie;
proxy_hide_header Set-Cookie;
proxy_no_cache $http_pragma $http_authorization $mag_nocacheuri $mag_mobiledevices $size_cachebypass;
proxy_cache_bypass $http_pragma $http_authorization $mag_nocacheuri $mag_mobiledevices $size_cachebypass;
proxy_cache_use_stale error timeout invalid_header updating http_500 http_502 http_503 http_504;
proxy_connect_timeout 59s;
proxy_send_timeout 600;
proxy_read_timeout 600;
proxy_buffer_size 8k;
proxy_buffers 4112 8k;
proxy_busy_buffers_size 8192k;
proxy_temp_file_write_size 8192k;
proxy_pass_header Set-Cookie;
proxy_redirect off;
proxy_http_version 1.1;
proxy_set_header Accept-Encoding '';
proxy_ignore_headers Cache-Control Expires;
proxy_set_header Referer $http_referer;
proxy_set_header Host $host;
proxy_hide_header X-Powered-By;
proxy_hide_header Vary;
proxy_set_header Cookie $http_cookie;
proxy_set_header X-Real-IP $remote_addr;
proxy_set_header X-Forwarded-Host $host;
proxy_set_header X-Forwarded-Server $host;
proxy_set_header X-Forwarded-Proto $scheme;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
#proxy_next_upstream error timeout invalid_header http_500 http_502 http_503 http_504 http_404;
At the bottom of /usr/local/nginx/conf/nginx.conf
just before the last include file before the closing curly bracket }
add the 2 include files
include /usr/local/nginx/conf/proxycache_map.conf;
include /usr/local/nginx/conf/proxycache-includes.conf;
so it looks like below
include /usr/local/nginx/conf/proxycache_map.conf;
include /usr/local/nginx/conf/proxycache-includes.conf;
include /usr/local/nginx/conf/conf.d/*.conf;
}
create these 2 files
/usr/local/nginx/conf/proxycache_map.conf
/usr/local/nginx/conf/proxycache-includes.conf
contents of /usr/local/nginx/conf/proxycache_map.conf
initially sets up Nginx HTTP/2 HTTPS to reverse proxy to Nginx non-HTTPS backend on port 8686 server localhost:8686 weight=1
to confirm Nginx reverse proxy works first and has varnish cache backend commented out and disabled for now server localhost:6081 weight=1
upstream proxy_backend {
zone upstream_dynamic 512k;
keepalive 256;
#least_conn;
# proxy to varnish cache backend
#server localhost:6081 weight=1;
# proxy to nginx backend
server localhost:8686 weight=1;
}
map $request_uri $mag_nocacheuri {
default 0;
~^/customer 1;
~^/register 1;
~^/login 1;
~^/validate-field 1;
~^/captcha 1;
~^/lost-password 1;
~^/cart/ 1;
~^/checkout/ 1;
~^/add-to-cart= 1;
~^/wp-admin/ 1;
~^/my-account/ 1;
~^/members/ 1;
~^/signup/ 1;
~^/join/ 1;
~^/two-step 1;
}
map $http_user_agent $mag_mobiledevices {
default 0;
~*(iPad|iPhone|Android|IEMobile|Blackberry) 1;
"~*Firefox.*Mobile" 1;
"~*ipod.*mobile" 1;
"~*Opera\ Mini" 1;
"~*Opera\ Mobile" 1;
"~*Mobile" 1;
"~*Tablet" 1;
"~*Kindle" 1;
"~*Windows\ Phone" 1;
}
split_clients "$remote_addr$remote_port" $split_ip {
4% 127.0.0.2;
4% 127.0.0.3;
4% 127.0.0.4;
4% 127.0.0.5;
4% 127.0.0.6;
4% 127.0.0.7;
4% 127.0.0.8;
4% 127.0.0.9;
4% 127.0.0.10;
4% 127.0.0.11;
4% 127.0.0.12;
4% 127.0.0.13;
4% 127.0.0.14;
4% 127.0.0.15;
4% 127.0.0.16;
4% 127.0.0.17;
4% 127.0.0.18;
4% 127.0.0.19;
4% 127.0.0.20;
4% 127.0.0.21;
4% 127.0.0.22;
4% 127.0.0.23;
4% 127.0.0.24;
4% 127.0.0.25;
* 127.0.0.26;
}
contents of /usr/local/nginx/conf/proxycache-includes.conf
as we will setup some micro caching too on Nginx HTTP/2 HTTPS reverse proxy for just TTLS = 3 seconds
proxy_cache_path /home/nginx/proxycache/0-magento.domain.com-proxycache levels=1:2 keys_zone=cache_magento.domain.com:300m max_size=1200m inactive=2m manager_files=200 manager_threshold=200 manager_sleep=50 loader_files=200 loader_threshold=200 loader_sleep=50;
create proxy_cache_path
directory
vhostname=magento.domain.com
mkdir -p "/home/nginx/proxycache/0-$vhostname-proxycache"
chown -R nginx:nginx "/home/nginx/proxycache/0-$vhostname-proxycache"
chmod 0770 "/home/nginx/proxycache/0-$vhostname-proxycache"
Restart Nginx server
service nginx restart
or via Centmin Mod command shortcut
ngxrestart
confirm Nginx reverse proxy works first with Nginx backend on port 8686 defined in /usr/local/nginx/conf/proxycache_map.conf
upstream
curl -Ik https://magento.domain.com/
HTTP/1.1 200 OK
Date: Wed, 14 Mar 2018 08:36:23 GMT
Content-Type: text/html; charset=UTF-8
Connection: keep-alive
Vary: Accept-Encoding
Pragma: no-cache
Cache-Control: max-age=0, must-revalidate, no-cache, no-store
Expires: Tue, 14 Mar 2017 08:16:40 GMT
X-Content-Type-Options: nosniff
X-XSS-Protection: 1; mode=block
X-Frame-Options: SAMEORIGIN
X-Processing-Time: 2.297
X-Request-ID: ae327d25a26333a06778001b9f9ad1f5
X-UA-Compatible: IE=Edge,chrome=1
Link: <https://magento.domain.com/>; rel="canonical"
Server: nginx centminmod
X-Powered-By: centminmod
X-Cache-Status: HIT
confirm HTTP to HTTPS redirect works
curl -Ik http://magento.domain.com/
HTTP/1.1 302 Moved Temporarily
Date: Wed, 14 Mar 2018 08:49:58 GMT
Content-Type: text/html
Content-Length: 154
Connection: keep-alive
Location: https://magento.domain.com/
Server: nginx centminmod
X-Powered-By: centminmod
Confirming HTTP/2 HTTPS works with updated curl version = HTTP/2 200
curl -V
curl 7.59.0-DEV (x86_64-pc-linux-gnu) libcurl/7.59.0-DEV OpenSSL/1.1.1 zlib/1.2.11 libpsl/0.18.0 ( libidn2/2.0.2) libssh2/1.8.0 nghttp2/1.32.0-DEV
Release-Date: [unreleased]
Protocols: dict file ftp ftps gopher http https imap imaps ldap ldaps pop3 pop3s rtsp scp sftp smb smbs smtp smtps telnet tftp
Features: AsynchDNS IPv6 Largefile NTLM NTLM_WB SSL libz TLS-SRP HTTP2 UnixSockets HTTPS-proxy PSL
curl -Ik https://magento.domain.com
HTTP/2 200
date: Fri, 16 Mar 2018 13:38:56 GMT
content-type: text/html; charset=UTF-8
vary: Accept-Encoding
x-content-type-options: nosniff
x-xss-protection: 1; mode=block
x-frame-options: SAMEORIGIN
x-processing-time: 0.200
x-request-id: 5e9addeb8382a7e38abdea493e52c9d8
x-ua-compatible: IE=Edge,chrome=1
link: <https://magento.domain.com/>; rel="canonical"
pragma: no-cache
expires: -1
cache-control: no-store, no-cache, must-revalidate, max-age=0
server: nginx centminmod
x-powered-by: centminmod
x-cache-status: HIT
HTTP/2 ALPN h2
curl -Ikv https://magento.domain.com 2>&1 | egrep 'ALPN|SSL con
* ALPN, offering h2
* ALPN, offering http/1.1
* SSL connection using TLSv1.2 / ECDHE-RSA-AES128-GCM-SHA256
* ALPN, server accepted to use h2
As per Magento 2.2.2 documentation, Varnish Cache needs to be set up for Magento full page caching.
This can be done via cmd line
vhostname=magento.domain.com
WEBROOT="/home/nginx/domains/${vhostname}/public"
IP=$(curl -4s ipinfo.io/ip)
cd $WEBROOT
n98-magerun2 config:set system/full_page_cache/caching_application 2 --skip-root-check
n98-magerun2 config:set system/full_page_cache/ttl 86400 --skip-root-check
n98-magerun2 config:set system/full_page_cache/varnish/access_list "localhost, 127.0.0.1, $IP" --skip-root-check
n98-magerun2 config:set system/full_page_cache/varnish/backend_port 8686 --skip-root-check
n98-magerun2 config:show system/full_page_cache/caching_application --skip-root-check
n98-magerun2 config:show system/full_page_cache/varnish/access_list --skip-root-check
n98-magerun2 config:show system/full_page_cache/varnish/backend_port --skip-root-check
php $WEBROOT/bin/magento cache:flush
Verify values set
n98-magerun2 config:show system/full_page_cache/caching_application --skip-root-check
n98-magerun2 config:show system/full_page_cache/ttl --skip-root-check
n98-magerun2 config:show system/full_page_cache/varnish/ --skip-root-check
n98-magerun2 config:show system/full_page_cache/caching_application --skip-root-check
2
n98-magerun2 config:show system/full_page_cache/ttl --skip-root-check
86400
n98-magerun2 config:show system/full_page_cache/varnish/ --skip-root-check
system/full_page_cache/varnish/access_list - localhost, 127.0.0.1, server_ipaddress
system/full_page_cache/varnish/backend_host - localhost
system/full_page_cache/varnish/backend_port - 8686
system/full_page_cache/varnish/grace_period - 300
This is what it looks like in Magento Admin area > Stores > Advanced > System > Full Page Cache
Above initial Nginx HTTP/2 HTTPS reverse proxy setup uses upstream defined as the Nginx backend on port 8686 defined in /usr/local/nginx/conf/proxycache_map.conf
upstream. This needs to switched to using Varnish Cache on port 6081 as backend within upstream definition
So change and disable server localhost:8686 weight=1
from
upstream proxy_backend {
zone upstream_dynamic 512k;
keepalive 256;
#least_conn;
# proxy to varnish cache backend
#server localhost:6081 weight=1;
# proxy to nginx backend
server localhost:8686 weight=1;
}
to using Varnish Cache server as backend via server localhost:6081 weight=1
upstream proxy_backend {
zone upstream_dynamic 512k;
keepalive 256;
#least_conn;
# proxy to varnish cache backend
server localhost:6081 weight=1;
# proxy to nginx backend
#server localhost:8686 weight=1;
}
Restart Nginx server
service nginx restart
or via Centmin Mod command shortcut
ngxrestart
Verify Magento 2.2.2 Varnish Caching with HTTP/2 setup
varnishadm param.show feature
feature
Value is: http2
Default is: none
Enable/Disable various minor features.
none Disable all features.
Use /- prefix to enable/disable individual feature:
short_panic Short panic message.
wait_silo Wait for persistent silo.
no_coredump No coredumps.
esi_ignore_https Treat HTTPS as HTTP in
ESI:includes
esi_disable_xml_check Don't check of body looks like
XML
esi_ignore_other_elements Ignore non-esi XML-elements
esi_remove_bom Remove UTF-8 BOM
https_scheme Also split https URIs
http2 Support HTTP/2 protocol
varnishadm param.show
accept_filter -
acceptor_sleep_decay 0.9 (default)
acceptor_sleep_incr 0.000 [seconds] (default)
acceptor_sleep_max 0.050 [seconds] (default)
auto_restart on [bool] (default)
backend_idle_timeout 60.000 [seconds] (default)
ban_cutoff 0 [bans] (default)
ban_dups on [bool] (default)
ban_lurker_age 60.000 [seconds] (default)
ban_lurker_batch 1000 (default)
ban_lurker_holdoff 0.010 [seconds] (default)
ban_lurker_sleep 0.010 [seconds] (default)
between_bytes_timeout 60.000 [seconds] (default)
cc_command exec gcc -std=gnu99 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mtune=generic -Wall -Werror -Wno-error=unused-result -pthread -fpic -shared -Wl,-x -o %o %s (default)
cli_buffer 8k [bytes] (default)
cli_limit 48k [bytes] (default)
cli_timeout 10.000 [seconds]
clock_skew 10 [seconds] (default)
clock_step 1.000 [seconds] (default)
connect_timeout 3.500 [seconds] (default)
critbit_cooloff 180.000 [seconds] (default)
debug none (default)
default_grace 10.000 [seconds] (default)
default_keep 0.000 [seconds] (default)
default_ttl 120.000 [seconds] (default)
feature http2
fetch_chunksize 16k [bytes] (default)
fetch_maxchunksize 0.25G [bytes] (default)
first_byte_timeout 60.000 [seconds] (default)
gzip_buffer 32k [bytes] (default)
gzip_level 6 (default)
gzip_memlevel 8 (default)
h2_rx_window_increment 1M [bytes] (default)
h2_rx_window_low_water 10M [bytes] (default)
http_gzip_support on [bool] (default)
http_max_hdr 64 [header lines] (default)
http_range_support on [bool] (default)
http_resp_hdr_len 64k [bytes]
http_resp_size 96k [bytes]
idle_send_timeout 60.000 [seconds] (default)
listen_depth 4096 [connections]
lru_interval 2.000 [seconds] (default)
max_esi_depth 5 [levels] (default)
max_restarts 4 [restarts] (default)
max_retries 4 [retries] (default)
nuke_limit 50 [allocations] (default)
pcre_match_limit 10000 (default)
pcre_match_limit_recursion 20 (default)
ping_interval 3 [seconds] (default)
pipe_timeout 60.000 [seconds] (default)
pool_req 10,100,10 (default)
pool_sess 10,100,10 (default)
pool_vbo 10,100,10 (default)
prefer_ipv6 off [bool] (default)
rush_exponent 3 [requests per request] (default)
send_timeout 600.000 [seconds] (default)
shm_reclen 255b [bytes] (default)
shortlived 10.000 [seconds] (default)
sigsegv_handler on [bool] (default)
syslog_cli_traffic on [bool] (default)
tcp_fastopen on [bool]
tcp_keepalive_intvl 30.000 [seconds] (default)
tcp_keepalive_probes 3 [probes] (default)
tcp_keepalive_time 240.000 [seconds] (default)
thread_pool_add_delay 0.020 [seconds]
thread_pool_destroy_delay 1.000 [seconds] (default)
thread_pool_fail_delay 0.200 [seconds] (default)
thread_pool_max 1500 [threads]
thread_pool_min 500 [threads]
thread_pool_reserve 0 [threads] (default)
thread_pool_stack 48k [bytes] (default)
thread_pool_timeout 300.000 [seconds] (default)
thread_pools 2 [pools] (default)
thread_queue_limit 20 (default)
thread_stats_rate 10 [requests] (default)
timeout_idle 5.000 [seconds] (default)
timeout_linger 0.050 [seconds] (default)
vcc_allow_inline_c off [bool] (default)
vcc_err_unref on [bool] (default)
vcc_unsafe_path on [bool] (default)
vcl_cooldown 600.000 [seconds] (default)
vcl_dir /etc/varnish:/usr/share/varnish/vcl (default)
vcl_path /etc/varnish:/usr/share/varnish/vcl (default)
vmod_dir /usr/lib64/varnish/vmods (default)
vmod_path /usr/lib64/varnish/vmods (default)
vsl_buffer 4k [bytes] (default)
vsl_mask -VCL_trace,-WorkThread,-Hash,-VfpAcct (default)
vsl_reclen 255b [bytes] (default)
vsl_space 80M [bytes] (default)
vsm_free_cooldown 60.000 [seconds] (default)
vsm_space 1M [bytes] (default)
workspace_backend 0.25M [bytes]
workspace_client 0.25M [bytes]
workspace_session 0.25M [bytes]
workspace_thread 2k [bytes] (default)
curl -Ik https://magento.domain.com/
HTTP/1.1 200 OK
Date: Wed, 14 Mar 2018 12:19:42 GMT
Content-Type: text/html; charset=UTF-8
Connection: keep-alive
Vary: Accept-Encoding
X-Content-Type-Options: nosniff
X-XSS-Protection: 1; mode=block
X-Frame-Options: SAMEORIGIN
X-Processing-Time: 0.099
X-Request-ID: 942205ca8c4b080ab7d4b1b422eca918
X-UA-Compatible: IE=Edge,chrome=1
Pragma: no-cache
Expires: -1
Cache-Control: no-store, no-cache, must-revalidate, max-age=0
Server: nginx centminmod
X-Powered-By: centminmod
X-Cache-Status: HIT
curl -Ik http://magento.domain.com:6081/
HTTP/1.1 200 OK
Date: Wed, 14 Mar 2018 12:12:44 GMT
Content-Type: text/html; charset=UTF-8
Vary: Accept-Encoding
X-Content-Type-Options: nosniff
X-XSS-Protection: 1; mode=block
X-Frame-Options: SAMEORIGIN
X-Processing-Time: 1.101
X-Request-ID: 7897e4a2c619b4b62117de8dde990825
X-UA-Compatible: IE=Edge,chrome=1
Pragma: no-cache
Expires: -1
Cache-Control: no-store, no-cache, must-revalidate, max-age=0
Accept-Ranges: bytes
Connection: keep-alive
Quick benchmarks with Redis caching for sessions and backend and Varnish Cache for full page caching and a huge boost in performance compared to using Redis caching for full page caching jumping from 65-68 requests/sec and TTFB thread latency max at between 134-158ms.
first run without cache warm up with 569 requests/s and TTFB thread latency max at 581ms
domain=https://magento.domain.com
wrk-cmm -t2 -c2 -d10s --breakout -H 'Accept-Encoding: gzip' -s scripts/setup.lua --latency $domain
thread 1 created
thread 2 created
Running 10s test @ https://magento.domain.com
2 threads and 2 connections
Thread Stats Avg Stdev Max /- Stdev
Latency 11.03ms 53.21ms 581.69ms 97.69%
Connect 12.42ms 9.14ms 28.15ms 55.00%
TTFB 10.53ms 54.13ms 581.03ms 97.63%
TTLB 709.65us 0.90ms 26.59ms 96.59%
Req/Sec 294.81 119.88 620.00 64.95%
Latency Distribution
50% 2.97ms
75% 3.94ms
90% 7.20ms
99% 356.80ms
5736 requests in 10.08s, 39.96MB read
Requests/sec: 569.02
Transfer/sec: 3.96MB
thread 1 made 2680 requests and got 2678 responses
thread 2 made 3059 requests and got 3058 responses
second run with warmed up cache with 1,011 requests/second and TTFB thread latency max at 12.54ms
wrk-cmm -t2 -c2 -d10s --breakout -H 'Accept-Encoding: gzip' -s scripts/setup.lua --latency $domain
thread 1 created
thread 2 created
Running 10s test @ https://magento.domain.com
2 threads and 2 connections
Thread Stats Avg Stdev Max /- Stdev
Latency 1.99ms 0.90ms 13.00ms 91.47%
Connect 7.28ms 5.85ms 17.71ms 52.00%
TTFB 1.46ms 679.66us 12.54ms 81.05%
TTLB 505.80us 583.70us 6.74ms 91.19%
Req/Sec 508.07 126.29 720.00 66.50%
Latency Distribution
50% 1.49ms
75% 2.49ms
90% 2.76ms
99% 5.49ms
10124 requests in 10.01s, 70.53MB read
Requests/sec: 1011.06
Transfer/sec: 7.04MB
thread 1 made 5153 requests and got 5151 responses
Varnish cache stats after benchmark tests
varnishstat -1 | column -t
MGT.uptime 238 1.00 Management process uptime
MGT.child_start 1 0.00 Child process started
MGT.child_exit 0 0.00 Child process normal exit
MGT.child_stop 0 0.00 Child process unexpected exit
MGT.child_died 0 0.00 Child process died (signal)
MGT.child_dump 0 0.00 Child process core dumped
MGT.child_panic 0 0.00 Child process panic
MAIN.summs 748 3.13 stat summ operations
MAIN.uptime 239 1.00 Child process uptime
MAIN.sess_conn 166 0.69 Sessions accepted
MAIN.sess_drop 0 0.00 Sessions dropped
MAIN.sess_fail 0 0.00 Session accept failures
MAIN.client_req_400 0 0.00 Client requests received, subject to 400 errors
MAIN.client_req_417 0 0.00 Client requests received, subject to 417 errors
MAIN.client_req 166 0.69 Good client requests received
MAIN.cache_hit 12 0.05 Cache hits
MAIN.cache_hitpass 0 0.00 Cache hits for pass.
MAIN.cache_hitmiss 0 0.00 Cache hits for miss.
MAIN.cache_miss 2 0.01 Cache misses
MAIN.backend_conn 8 0.03 Backend conn. success
MAIN.backend_unhealthy 0 0.00 Backend conn. not attempted
MAIN.backend_busy 0 0.00 Backend conn. too many
MAIN.backend_fail 0 0.00 Backend conn. failures
MAIN.backend_reuse 153 0.64 Backend conn. reuses
MAIN.backend_recycle 161 0.67 Backend conn. recycles
MAIN.backend_retry 0 0.00 Backend conn. retry
MAIN.fetch_head 0 0.00 Fetch no body (HEAD)
MAIN.fetch_length 159 0.67 Fetch with Length
MAIN.fetch_chunked 2 0.01 Fetch chunked
MAIN.fetch_eof 0 0.00 Fetch EOF
MAIN.fetch_bad 0 0.00 Fetch bad T-E
MAIN.fetch_none 0 0.00 Fetch no body
MAIN.fetch_1xx 0 0.00 Fetch no body (1xx)
MAIN.fetch_204 0 0.00 Fetch no body (204)
MAIN.fetch_304 0 0.00 Fetch no body (304)
MAIN.fetch_failed 0 0.00 Fetch failed (all causes)
MAIN.fetch_no_thread 0 0.00 Fetch failed (no thread)
MAIN.pools 2 . Number of thread pools
MAIN.threads 1000 . Total number of threads
MAIN.threads_limited 0 0.00 Threads hit max
MAIN.threads_created 1000 4.18 Threads created
MAIN.threads_destroyed 0 0.00 Threads destroyed
MAIN.threads_failed 0 0.00 Thread creation failed
MAIN.thread_queue_len 0 . Length of session queue
MAIN.busy_sleep 0 0.00 Number of requests sent to sleep on busy objhdr
MAIN.busy_wakeup 0 0.00 Number of requests woken after sleep on busy objhdr
MAIN.busy_killed 0 0.00 Number of requests killed after sleep on busy objhdr
MAIN.sess_queued 0 0.00 Sessions queued for thread
MAIN.sess_dropped 0 0.00 Sessions dropped for thread
MAIN.req_dropped 0 0.00 Requests dropped
MAIN.n_object 2 . object structs made
MAIN.n_vampireobject 0 . unresurrected objects
MAIN.n_objectcore 4 . objectcore structs made
MAIN.n_objecthead 4 . objecthead structs made
MAIN.n_backend 1 . Number of backends
MAIN.n_expired 0 . Number of expired objects
MAIN.n_lru_nuked 0 . Number of LRU nuked objects
MAIN.n_lru_moved 6 . Number of LRU moved objects
MAIN.losthdr 0 0.00 HTTP header overflows
MAIN.s_sess 166 0.69 Total sessions seen
MAIN.s_pipe 0 0.00 Total pipe sessions seen
MAIN.s_pass 159 0.67 Total pass-ed requests seen
MAIN.s_fetch 161 0.67 Total backend fetches initiated
MAIN.s_synth 0 0.00 Total synthethic responses made
MAIN.s_req_hdrbytes 169119 707.61 Request header bytes
MAIN.s_req_bodybytes 0 0.00 Request body bytes
MAIN.s_resp_hdrbytes 67866 283.96 Response header bytes
MAIN.s_resp_bodybytes 2616180 10946.36 Response body bytes
MAIN.s_pipe_hdrbytes 0 0.00 Pipe request header bytes
MAIN.s_pipe_in 0 0.00 Piped bytes from client
MAIN.s_pipe_out 0 0.00 Piped bytes to client
MAIN.sess_closed 166 0.69 Session Closed
MAIN.sess_closed_err 0 0.00 Session Closed with error
MAIN.sess_readahead 0 0.00 Session Read Ahead
MAIN.sess_herd 0 0.00 Session herd
MAIN.sc_rem_close 0 0.00 Session OK REM_CLOSE
MAIN.sc_req_close 166 0.69 Session OK REQ_CLOSE
MAIN.sc_req_http10 0 0.00 Session Err REQ_HTTP10
MAIN.sc_rx_bad 0 0.00 Session Err RX_BAD
MAIN.sc_rx_body 0 0.00 Session Err RX_BODY
MAIN.sc_rx_junk 0 0.00 Session Err RX_JUNK
MAIN.sc_rx_overflow 0 0.00 Session Err RX_OVERFLOW
MAIN.sc_rx_timeout 0 0.00 Session Err RX_TIMEOUT
MAIN.sc_tx_pipe 0 0.00 Session OK TX_PIPE
MAIN.sc_tx_error 0 0.00 Session Err TX_ERROR
MAIN.sc_tx_eof 0 0.00 Session OK TX_EOF
MAIN.sc_resp_close 0 0.00 Session OK RESP_CLOSE
MAIN.sc_overload 0 0.00 Session Err OVERLOAD
MAIN.sc_pipe_overflow 0 0.00 Session Err PIPE_OVERFLOW
MAIN.sc_range_short 0 0.00 Session Err RANGE_SHORT
MAIN.sc_req_http20 0 0.00 Session Err REQ_HTTP20
MAIN.sc_vcl_failure 0 0.00 Session Err VCL_FAILURE
MAIN.shm_records 25737 107.69 SHM records
MAIN.shm_writes 1512 6.33 SHM writes
MAIN.shm_flushes 132 0.55 SHM flushes due to overflow
MAIN.shm_cont 32 0.13 SHM MTX contention
MAIN.shm_cycles 0 0.00 SHM cycles through buffer
MAIN.backend_req 161 0.67 Backend requests made
MAIN.n_vcl 1 . Number of loaded VCLs in total
MAIN.n_vcl_avail 1 . Number of VCLs available
MAIN.n_vcl_discard 0 . Number of discarded VCLs
MAIN.vcl_fail 0 0.00 VCL failures
MAIN.bans 1 . Count of bans
MAIN.bans_completed 1 . Number of bans marked 'completed'
MAIN.bans_obj 0 . Number of bans using obj.*
MAIN.bans_req 0 . Number of bans using req.*
MAIN.bans_added 1 0.00 Bans added
MAIN.bans_deleted 0 0.00 Bans deleted
MAIN.bans_tested 0 0.00 Bans tested against objects (lookup)
MAIN.bans_obj_killed 0 0.00 Objects killed by bans (lookup)
MAIN.bans_lurker_tested 0 0.00 Bans tested against objects (lurker)
MAIN.bans_tests_tested 0 0.00 Ban tests tested against objects (lookup)
MAIN.bans_lurker_tests_tested 0 0.00 Ban tests tested against objects (lurker)
MAIN.bans_lurker_obj_killed 0 0.00 Objects killed by bans (lurker)
MAIN.bans_lurker_obj_killed_cutoff 0 0.00 Objects killed by bans for cutoff (lurker)
MAIN.bans_dups 0 0.00 Bans superseded by other bans
MAIN.bans_lurker_contention 0 0.00 Lurker gave way for lookup
MAIN.bans_persisted_bytes 16 . Bytes used by the persisted ban lists
MAIN.bans_persisted_fragmentation 0 . Extra bytes in persisted ban lists due to fragmentation
MAIN.n_purges 0 . Number of purge operations executed
MAIN.n_obj_purged 0 . Number of purged objects
MAIN.exp_mailed 2 0.01 Number of objects mailed to expiry thread
MAIN.exp_received 2 0.01 Number of objects received by expiry thread
MAIN.hcb_nolock 14 0.06 HCB Lookups without lock
MAIN.hcb_lock 2 0.01 HCB Lookups with lock
MAIN.hcb_insert 2 0.01 HCB Inserts
MAIN.esi_errors 0 0.00 ESI parse errors (unlock)
MAIN.esi_warnings 0 0.00 ESI parse warnings (unlock)
MAIN.vmods 1 . Loaded VMODs
MAIN.n_gzip 158 0.66 Gzip operations
MAIN.n_gunzip 165 0.69 Gunzip operations
MAIN.n_test_gunzip 0 0.00 Test gunzip operations
LCK.backend.creat 3 0.01 Created locks
LCK.backend.destroy 0 0.00 Destroyed locks
LCK.backend.locks 473 1.98 Lock Operations
LCK.backend_tcp.creat 1 0.00 Created locks
LCK.backend_tcp.destroy 0 0.00 Destroyed locks
LCK.backend_tcp.locks 636 2.66 Lock Operations
LCK.ban.creat 1 0.00 Created locks
LCK.ban.destroy 0 0.00 Destroyed locks
LCK.ban.locks 183 0.77 Lock Operations
LCK.busyobj.creat 163 0.68 Created locks
LCK.busyobj.destroy 161 0.67 Destroyed locks
LCK.busyobj.locks 1726 7.22 Lock Operations
LCK.cli.creat 1 0.00 Created locks
LCK.cli.destroy 0 0.00 Destroyed locks
LCK.cli.locks 91 0.38 Lock Operations
LCK.exp.creat 1 0.00 Created locks
LCK.exp.destroy 0 0.00 Destroyed locks
LCK.exp.locks 13 0.05 Lock Operations
LCK.hcb.creat 1 0.00 Created locks
LCK.hcb.destroy 0 0.00 Destroyed locks
LCK.hcb.locks 4 0.02 Lock Operations
LCK.lru.creat 2 0.01 Created locks
LCK.lru.destroy 0 0.00 Destroyed locks
LCK.lru.locks 8 0.03 Lock Operations
LCK.mempool.creat 5 0.02 Created locks
LCK.mempool.destroy 0 0.00 Destroyed locks
LCK.mempool.locks 2108 8.82 Lock Operations
LCK.objhdr.creat 5 0.02 Created locks
LCK.objhdr.destroy 0 0.00 Destroyed locks
LCK.objhdr.locks 2023 8.46 Lock Operations
LCK.pipestat.creat 1 0.00 Created locks
LCK.pipestat.destroy 0 0.00 Destroyed locks
LCK.pipestat.locks 0 0.00 Lock Operations
LCK.sess.creat 166 0.69 Created locks
LCK.sess.destroy 166 0.69 Destroyed locks
LCK.sess.locks 502 2.10 Lock Operations
LCK.vbe.creat 1 0.00 Created locks
LCK.vbe.destroy 0 0.00 Destroyed locks
LCK.vbe.locks 134 0.56 Lock Operations
LCK.vcapace.creat 1 0.00 Created locks
LCK.vcapace.destroy 0 0.00 Destroyed locks
LCK.vcapace.locks 0 0.00 Lock Operations
LCK.vcl.creat 1 0.00 Created locks
LCK.vcl.destroy 0 0.00 Destroyed locks
LCK.vcl.locks 355 1.49 Lock Operations
LCK.vxid.creat 1 0.00 Created locks
LCK.vxid.destroy 0 0.00 Destroyed locks
LCK.vxid.locks 15 0.06 Lock Operations
LCK.waiter.creat 2 0.01 Created locks
LCK.waiter.destroy 0 0.00 Destroyed locks
LCK.waiter.locks 504 2.11 Lock Operations
LCK.wq.creat 3 0.01 Created locks
LCK.wq.destroy 0 0.00 Destroyed locks
LCK.wq.locks 3419 14.31 Lock Operations
LCK.wstat.creat 1 0.00 Created locks
LCK.wstat.destroy 0 0.00 Destroyed locks
LCK.wstat.locks 387 1.62 Lock Operations
MEMPOOL.busyobj.live 0 . In use
MEMPOOL.busyobj.pool 10 . In Pool
MEMPOOL.busyobj.sz_wanted 65536 . Size requested
MEMPOOL.busyobj.sz_actual 65504 . Size allocated
MEMPOOL.busyobj.allocs 161 0.67 Allocations
MEMPOOL.busyobj.frees 161 0.67 Frees
MEMPOOL.busyobj.recycle 161 0.67 Recycled from pool
MEMPOOL.busyobj.timeout 1 0.00 Timed out from pool
MEMPOOL.busyobj.toosmall 0 0.00 Too small to recycle
MEMPOOL.busyobj.surplus 0 0.00 Too many for pool
MEMPOOL.busyobj.randry 0 0.00 Pool ran dry
MEMPOOL.req0.live 0 . In use
MEMPOOL.req0.pool 10 . In Pool
MEMPOOL.req0.sz_wanted 65536 . Size requested
MEMPOOL.req0.sz_actual 65504 . Size allocated
MEMPOOL.req0.allocs 89 0.37 Allocations
MEMPOOL.req0.frees 89 0.37 Frees
MEMPOOL.req0.recycle 89 0.37 Recycled from pool
MEMPOOL.req0.timeout 1 0.00 Timed out from pool
MEMPOOL.req0.toosmall 0 0.00 Too small to recycle
MEMPOOL.req0.surplus 0 0.00 Too many for pool
MEMPOOL.req0.randry 0 0.00 Pool ran dry
MEMPOOL.sess0.live 0 . In use
MEMPOOL.sess0.pool 10 . In Pool
MEMPOOL.sess0.sz_wanted 512 . Size requested
MEMPOOL.sess0.sz_actual 480 . Size allocated
MEMPOOL.sess0.allocs 83 0.35 Allocations
MEMPOOL.sess0.frees 83 0.35 Frees
MEMPOOL.sess0.recycle 83 0.35 Recycled from pool
MEMPOOL.sess0.timeout 1 0.00 Timed out from pool
MEMPOOL.sess0.toosmall 0 0.00 Too small to recycle
MEMPOOL.sess0.surplus 0 0.00 Too many for pool
MEMPOOL.sess0.randry 0 0.00 Pool ran dry
LCK.sma.creat 2 0.01 Created locks
LCK.sma.destroy 0 0.00 Destroyed locks
LCK.sma.locks 905 3.79 Lock Operations
SMA.s0.c_req 7 0.03 Allocator requests
SMA.s0.c_fail 0 0.00 Allocator failures
SMA.s0.c_bytes 42019 175.81 Bytes allocated
SMA.s0.c_freed 32768 137.10 Bytes freed
SMA.s0.g_alloc 5 . Allocations outstanding
SMA.s0.g_bytes 9251 . Bytes outstanding
SMA.s0.g_space 268426205 . Bytes available
SMA.Transient.c_req 448 1.87 Allocator requests
SMA.Transient.c_fail 0 0.00 Allocator failures
SMA.Transient.c_bytes 3105627 12994.26 Bytes allocated
SMA.Transient.c_freed 3105627 12994.26 Bytes freed
SMA.Transient.g_alloc 0 . Allocations outstanding
SMA.Transient.g_bytes 0 . Bytes outstanding
SMA.Transient.g_space 0 . Bytes available
MEMPOOL.req1.live 0 . In use
MEMPOOL.req1.pool 10 . In Pool
MEMPOOL.req1.sz_wanted 65536 . Size requested
MEMPOOL.req1.sz_actual 65504 . Size allocated
MEMPOOL.req1.allocs 84 0.35 Allocations
MEMPOOL.req1.frees 84 0.35 Frees
MEMPOOL.req1.recycle 84 0.35 Recycled from pool
MEMPOOL.req1.timeout 0 0.00 Timed out from pool
MEMPOOL.req1.toosmall 0 0.00 Too small to recycle
MEMPOOL.req1.surplus 0 0.00 Too many for pool
MEMPOOL.req1.randry 0 0.00 Pool ran dry
MEMPOOL.sess1.live 0 . In use
MEMPOOL.sess1.pool 10 . In Pool
MEMPOOL.sess1.sz_wanted 512 . Size requested
MEMPOOL.sess1.sz_actual 480 . Size allocated
MEMPOOL.sess1.allocs 83 0.35 Allocations
MEMPOOL.sess1.frees 83 0.35 Frees
MEMPOOL.sess1.recycle 83 0.35 Recycled from pool
MEMPOOL.sess1.timeout 1 0.00 Timed out from pool
MEMPOOL.sess1.toosmall 0 0.00 Too small to recycle
MEMPOOL.sess1.surplus 0 0.00 Too many for pool
MEMPOOL.sess1.randry 0 0.00 Pool ran dry
VBE.boot.default.happy 4503599627370495 . Happy health probes
VBE.boot.default.bereq_hdrbytes 172088 720.03 Request header bytes
VBE.boot.default.bereq_bodybytes 0 0.00 Request body bytes
VBE.boot.default.beresp_hdrbytes 76081 318.33 Response header bytes
VBE.boot.default.beresp_bodybytes 531365 2223.28 Response body bytes
VBE.boot.default.pipe_hdrbytes 0 0.00 Pipe request header bytes
VBE.boot.default.pipe_out 0 0.00 Piped bytes to backend
VBE.boot.default.pipe_in 0 0.00 Piped bytes from backend
VBE.boot.default.conn 0 . Concurrent connections to backend
VBE.boot.default.req 161 0.67 Backend requests sent
In this configuration with Varnish Cache, you will still receive load on Nginx web server as it's in front of Varnish Cache for terminating - handling HTTPS SSL connections which are then passed over HTTP/2 as clear plain text to Varnish Cache which either retrieves the visitor's request from it's Varnish Cache store or from the non-HTTPS Nginx backend we setup on port 8686.
Below are Top stats during wrk-cmm load testing benchmarks of a longer duration at 120 seconds which confirm this - that Nginx still receives the bulk of the work load. There will be at least 2 Nginx processes as wrk-cmm load tester is running with 2 threads.
top -c
top - 09:25:50 up 3 days, 36 min, 2 users, load average: 2.45, 1.95, 1.36
Tasks: 114 total, 3 running, 111 sleeping, 0 stopped, 0 zombie
%Cpu0 : 50.3 us, 12.7 sy, 0.0 ni, 34.2 id, 0.0 wa, 0.0 hi, 2.4 si, 0.3 st
%Cpu1 : 44.2 us, 9.9 sy, 0.0 ni, 43.2 id, 0.0 wa, 0.0 hi, 2.4 si, 0.3 st
%Cpu2 : 44.4 us, 11.9 sy, 0.0 ni, 41.6 id, 0.0 wa, 0.0 hi, 1.7 si, 0.3 st
%Cpu3 : 20.2 us, 13.2 sy, 0.0 ni, 65.5 id, 0.0 wa, 0.0 hi, 0.7 si, 0.3 st
KiB Mem : 3881428 total, 384332 free, 703628 used, 2793468 buff/cache
KiB Swap: 4194300 total, 4193232 free, 1068 used. 2597960 avail Mem
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME COMMAND
1600 nginx 10 -10 461340 44740 2312 S 73.1 1.2 1:14.43 nginx
1599 nginx 10 -10 465436 44832 2384 R 62.1 1.2 1:24.64 nginx
8260 root 20 0 307532 3440 2360 S 49.8 0.1 0:55.48 wrk-cmm
1718 nginx 20 0 348612 38012 3636 S 11.6 1.0 4:22.14 amplify-agent
7715 nginx 20 0 916364 24888 13992 S 1.7 0.6 0:00.85 php-fpm
771 root 20 0 550532 31332 17076 S 0.7 0.8 12:14.86 dockerd
1127 mysql 20 0 1116544 304360 12460 S 0.7 7.8 30:28.38 mysqld
1597 nginx 10 -10 461340 44668 2332 S 0.7 1.2 1:26.91 nginx
8540 root 20 0 157784 2188 1472 R 0.3 0.1 0:00.09 top
In this configuration, PHP will always have at least 1 almost active process due to the Varnish Cache backend health check probe we defined at /home/nginx/domains/magento.domain.com/public/pub/health_check.php
in Magento 2 generated Varnish Cache /etc/varnish/default.vcl
config file.
In /etc/varnish/default.vcl
backend default {
.host = "localhost";
.port = "8686";
.first_byte_timeout = 600s;
.connect_timeout = 5s;
.between_bytes_timeout = 3s;
.probe = {
.url = "/health_check.php";
.timeout = 3s;
.interval = 5s;
.window = 10;
.threshold = 5;
}
}
Also utilising PHP will be the Magento 2 cronjobs we scheduled earlier.
#~ MAGENTO START e62ad2add6593b3556cf71a699c00***
* * * * * /usr/local/bin/php /home/nginx/domains/magento.domain.com/public/bin/magento cron:run 2>&1 | grep -v "Ran jobs by schedule" >> /home/nginx/domains/magento.domain.com/public/var/log/magento.cron.log
* * * * * /usr/local/bin/php /home/nginx/domains/magento.domain.com/public/update/cron.php >> /home/nginx/domains/magento.domain.com/public/var/log/update.cron.log
* * * * * /usr/local/bin/php /home/nginx/domains/magento.domain.com/public/bin/magento setup:cron:run >> /home/nginx/domains/magento.domain.com/public/var/log/setup.cron.log
#~ MAGENTO END e62ad2add6593b3556cf71a699c00***
Centmin Mod PHP-FPM status output in full. Notice the request URI for /health_check.php
curl -s localhost/phpstatus?full
pool: www
process manager: static
start time: 15/Mar/2018:14:44:41 0000
start since: 67533
accepted conn: 16139
listen queue: 0
max listen queue: 1
listen queue len: 8096
idle processes: 7
active processes: 1
total processes: 8
max active processes: 3
max children reached: 0
slow requests: 0
************************
pid: 7650
state: Running
start time: 16/Mar/2018:09:20:35 0000
start since: 579
requests: 18
request duration: 1513
request method: GET
request URI: /phpstatus?full
content length: 0
user: -
script: -
last request cpu: 0.00
last request memory: 0
************************
pid: 7648
state: Idle
start time: 16/Mar/2018:09:20:30 0000
start since: 584
requests: 18
request duration: 1100
request method: GET
request URI: /phpstatus
content length: 0
user: -
script: -
last request cpu: 0.00
last request memory: 2097152
************************
pid: 7663
state: Idle
start time: 16/Mar/2018:09:20:40 0000
start since: 574
requests: 17
request duration: 30593
request method: GET
request URI: /health_check.php
content length: 0
user: -
script: /home/nginx/domains/magento.domain.com/public/pub/health_check.php
last request cpu: 98.06
last request memory: 4194304
************************
pid: 7692
state: Idle
start time: 16/Mar/2018:09:20:50 0000
start since: 564
requests: 17
request duration: 31242
request method: GET
request URI: /health_check.php
content length: 0
user: -
script: /home/nginx/domains/magento.domain.com/public/pub/health_check.php
last request cpu: 96.02
last request memory: 4194304
************************
pid: 7693
state: Idle
start time: 16/Mar/2018:09:20:50 0000
start since: 564
requests: 17
request duration: 31092
request method: GET
request URI: /health_check.php
content length: 0
user: -
script: /home/nginx/domains/magento.domain.com/public/pub/health_check.php
last request cpu: 96.49
last request memory: 4194304
************************
pid: 7715
state: Idle
start time: 16/Mar/2018:09:20:55 0000
start since: 559
requests: 17
request duration: 57387
request method: GET
request URI: /health_check.php
content length: 0
user: -
script: /home/nginx/domains/magento.domain.com/public/pub/health_check.php
last request cpu: 69.70
last request memory: 4194304
************************
pid: 7677
state: Idle
start time: 16/Mar/2018:09:20:45 0000
start since: 569
requests: 17
request duration: 352
request method: GET
request URI: /phpstatus
content length: 0
user: -
script: -
last request cpu: 0.00
last request memory: 2097152
************************
pid: 7644
state: Idle
start time: 16/Mar/2018:09:20:30 0000
start since: 584
requests: 18
request duration: 159976
request method: GET
request URI: /health_check.php
content length: 0
user: -
script: /home/nginx/domains/magento.domain.com/public/pub/health_check.php
last request cpu: 50.01
last request memory: 4194304
Nginx requests/s reported in Nginx Amplify monitoring.
Nginx traffic received
Load average
To flush Magento full page cache within Varnish Cache command:
php $WEBROOT/bin/magento cache:flush full_page
php $WEBROOT/bin/magento cache:flush full_page
Flushed cache types:
full_page
Official documentation outlines the process
- http://devdocs.magento.com/guides/v2.2/install-gde/install/cli/install-cli-backup.html
- http://devdocs.magento.com/guides/v2.2/install-gde/trouble/tshoot_segfault.html
Magento 2 backup code, media and database
vhostname=magento.domain.com
WEBROOT="/home/nginx/domains/${vhostname}/public"
cd $WEBROOT
php $WEBROOT/bin/magento setup:backup --code --media --db
php $WEBROOT/bin/magento info:backups:list
example backup
vhostname=magento.domain.com
WEBROOT="/home/nginx/domains/${vhostname}/public"
cd $WEBROOT
time php $WEBROOT/bin/magento setup:backup --code --media --db
Enabling maintenance mode
Code backup is starting...
Code backup filename: 1521200521_filesystem_code.tgz (The archive can be uncompressed with 7-Zip on Windows systems)
Code backup path: /home/nginx/domains/magento.domain.com/public/var/backups/1521200521_filesystem_code.tgz
[SUCCESS]: Code backup completed successfully.
Media backup is starting...
Media backup filename: 1521200521_filesystem_media.tgz (The archive can be uncompressed with 7-Zip on Windows systems)
Media backup path: /home/nginx/domains/magento.domain.com/public/var/backups/1521200521_filesystem_media.tgz
[SUCCESS]: Media backup completed successfully.
DB backup is starting...
DB backup filename: 1521200521_db.sql
DB backup path: /home/nginx/domains/magento.domain.com/public/var/backups/1521200521_db.sql
[SUCCESS]: DB backup completed successfully.
Disabling maintenance mode
real 4m38.630s
user 1m39.453s
sys 0m50.048s
ls -lah /home/nginx/domains/magento.domain.com/public/var/backups/
total 55M
drwxrwx---. 2 nginx nginx 4.0K Mar 16 11:46 .
drwxr-sr-x. 10 nginx nginx 4.0K Mar 16 11:51 ..
-rw-r--r-- 1 root root 1005K Mar 16 11:46 1521200521_db.sql
-rw-r--r-- 1 root root 54M Mar 16 11:46 1521200521_filesystem_code.tgz
-rw-r--r-- 1 root root 60K Mar 16 11:46 1521200521_filesystem_media.tgz
php $WEBROOT/bin/magento info:backups:list
Showing backup files in /home/nginx/domains/magento.domain.com/public/var/backups.
--------------------------------- -------------
| Backup Filename | Backup Type |
--------------------------------- -------------
| 1521200521_filesystem_code.tgz | code |
| 1521200521_db.sql | db |
| 1521200521_filesystem_media.tgz | media |
--------------------------------- -------------
Restoring Magento 2 from backups
magento setup:rollback -c 1521200521_filesystem_code.tgz -m 1521200521_filesystem_media.tgz -d 1521200521_db.sql
Official documentation outlines the process
- http://devdocs.magento.com/guides/v2.2/install-gde/install/cli/install-cli-backup.html
- http://devdocs.magento.com/guides/v2.2/install-gde/install/cli/install-cli-sample-data.html
- http://devdocs.magento.com/guides/v2.2/install-gde/install/sample-data-before-composer.html
- http://devdocs.magento.com/guides/v2.2/install-gde/install/cli/install-cli-sample-data-other.html
- http://devdocs.magento.com/guides/v2.2/install-gde/trouble/tshoot_sample-data.html#trouble-samp-prod
- https://github.com/magento/magento2-sample-data/tree/2.2
Install sample data after Magento 2 install. Added checks if Varnish & Redis cache are in play as per setup in this guide to restart Varnish Cache and flush Redis caches
vhostname=magento.domain.com
WEBROOT="/home/nginx/domains/${vhostname}/public"
cd $WEBROOT
php $WEBROOT/bin/magento setup:backup --code --media --db
php $WEBROOT/bin/magento info:backups:list
php $WEBROOT/bin/magento deploy:mode:show
php $WEBROOT/bin/magento deploy:mode:set developer
php $WEBROOT/bin/magento sampledata:deploy
php $WEBROOT/bin/magento cache:clean
php $WEBROOT/bin/magento setup:upgrade
php $WEBROOT/bin/magento deploy:mode:show
php $WEBROOT/bin/magento deploy:mode:set production
php $WEBROOT/bin/magento indexer:reindex
php $WEBROOT/bin/magento setup:static-content:deploy
php $WEBROOT/bin/magento setup:di:compile
composer dump-autoload -o
php $WEBROOT/bin/magento cache:flush
time find var generated vendor pub/static pub/media app/etc -type f -exec chmod u w {} \;
time find var vendor generated pub/static pub/media app/etc -type d -exec chmod u w {} \;
chown -R nginx:nginx "/home/nginx/domains/${vhostname}/public"
service nginx restart
if [ -f "$(which varnishadm)" ]; then service varnish restart; fi
if [ -f "$(which redis-cli)" ]; then redis-cli -n 12 FLUSHALL; redis-cli -n 13 FLUSHALL; redis-cli -n 14 FLUSHALL; fi
Remove sample data
vhostname=magento.domain.com
WEBROOT="/home/nginx/domains/${vhostname}/public"
cd $WEBROOT
php $WEBROOT/bin/magento setup:backup --code --media --db
php $WEBROOT/bin/magento info:backups:list
php $WEBROOT/bin/magento sampledata:remove
php $WEBROOT/bin/magento cache:flush
- http://devdocs.magento.com/guides/v2.2/release-notes/ReleaseNotes2.2.2CE.html
- http://devdocs.magento.com/guides/v2.2/comp-mgr/cli/cli-upgrade.html
- http://devdocs.magento.com/guides/v2.2/comp-mgr/bk-compman-upgrade-guide.html
- http://devdocs.magento.com/guides/v2.2/comp-mgr/trouble/cman/maint-mode.html
- http://devdocs.magento.com/guides/v2.2/config-guide/bootstrap/magento-modes.html
- http://devdocs.magento.com/guides/v2.2/config-guide/cli/config-cli-subcommands-mode.html
- http://devdocs.magento.com/guides/v2.2/install-gde/install-quick-ref.html
- http://devdocs.magento.com/guides/v2.2/install-gde/prereq/connect-auth.html
- http://devdocs.magento.com/guides/v2.2/install-gde/system-requirements2.html
- http://devdocs.magento.com/guides/v2.2/install-gde/prereq/integrator_install_ce.html
- http://devdocs.magento.com/guides/v2.2/config-guide/bk-config-guide.html
- http://devdocs.magento.com/guides/v2.2/install-gde/install/post-install-config.html
- http://devdocs.magento.com/guides/v2.2/install-gde/install/cli/install-cli-uninstall.html#instgde-install-magento-update
- http://devdocs.magento.com/guides/v2.2/install-gde/install/get-help.html
- http://devdocs.magento.com/guides/v2.2/config-guide/deployment/single-machine.html
- http://devdocs.magento.com/guides/v2.2/install-gde/install/post-install-umask.html
- http://devdocs.magento.com/guides/v2.2/config-guide/cli/config-cli-subcommands-static-view.html
- http://devdocs.magento.com/guides/v2.2/config-guide/redis/redis-pg-cache.html
- http://devdocs.magento.com/guides/v2.2/config-guide/varnish/config-varnish.html
- http://devdocs.magento.com/guides/v2.2/config-guide/varnish/config-varnish-configure.html
- http://devdocs.magento.com/guides/v2.2/config-guide/varnish/config-varnish-magento.html
- http://devdocs.magento.com/guides/v2.2/config-guide/varnish/use-multiple-varnish-cache.html
- http://devdocs.magento.com/guides/v2.2/config-guide/varnish/use-varnish-cache.html
- http://devdocs.magento.com/guides/v2.2/config-guide/varnish/use-varnish-cache-how.html
- http://devdocs.magento.com/guides/v2.2/config-guide/varnish/tshoot-varnish-503.html
- https://github.com/colinmollenhour/Cm_Cache_Backend_Redis
- https://github.com/colinmollenhour/magento-cache-benchmark
- https://support.hypernode.com/knowledgebase/varnish-on-magento2/
- http://devdocs.magento.com/guides/v2.2/install-gde/install/cli/install-cli-sample-data.html
- http://devdocs.magento.com/guides/v2.2/install-gde/install/sample-data-before-composer.html
- http://devdocs.magento.com/guides/v2.2/install-gde/install/cli/install-cli-sample-data-other.html
- https://github.com/IvanChepurnyi/load-test-magento2-bootstrap (setup.sh)
- https://github.com/IvanChepurnyi/load-test-magento1-bootstrap
- http://devdocs.magento.com/guides/v2.2/install-gde/prereq/nginx.html
- https://github.com/andrewhowdencom/magento2-1/blob/2.2.1-preview/nginx.conf.sample
- https://github.com/magento/magento2/pull/11690/files
- https://github.com/magenx/Magento-nginx-config
- http://devdocs.magento.com/guides/v2.2/install-gde/install/cli/install-cli-backup.html
- https://github.com/MagePsycho/magento2-db-code-backup-bash-script
- http://devdocs.magento.com/guides/v2.2/migration/bk-migration-guide.html
- https://serverguy.com/magento/migrate-magento-1-magento-2-guide/
- https://www.cloudways.com/blog/migrate-from-magento-1-to-magento-2/
- https://github.com/magento/data-migration-tool
- https://github.com/magento/code-migration
- https://github.com/netz98/n98-magerun2
- https://github.com/netz98/n98-magerun2/wiki
- http://magerun.net/
- https://www.atwix.com/magento-2/n98-magerun2-tool-overview/
- https://community.centminmod.com/threads/updated-magento-2-nginx-directives-for-magento-2-15.10975/
- https://www.goivvy.com/blog/speed-up-magento
- https://www.goivvy.com/blog/magento-2-upgrade
- https://github.com/MagePsycho/magento2-installer-bash-script
- https://github.com/Zorennnyj/m2_install
- http://devdocs.magento.com/guides/v2.2/config-guide/cli/config-cli-subcommands-perf-data.html
- https://community.magento.com/t5/Hosting-Performance/bd-p/Hosting-Performance
- https://medium.com/@IvanChepurnyi/do-not-blindly-trust-benchmarks-analyse-them-d56168f77434
- https://www.keycdn.com/blog/speed-up-magento/
- https://community.magento.com/t5/Hosting-Performance/CSS-and-JS-loading-WAY-too-slow/m-p/61742#M235
- http://blog.mageworx.com/2018/02/5-ways-to-improve-magento-2-mobile-speed/
- https://servebolt.com/performance-magento-2-demo-store-new-york/
- https://amasty.com/blog/magento-1-2-performance-speed-php-5-php-7/
- http://devdocs.magento.com/guides/v2.2/config-guide/bootstrap/mage-profiler.html
- https://amasty.com/knowledge-base/how-to-enable-magento-2-profiler.html
- https://aionhill.com/8-effective-ways-to-really-boost-magento-page-speed
MYIP=$(last -i | grep "still logged in" | awk '{print $3}' | uniq)
php $WEBROOT/bin/magento maintenance:allow-ips --none
php $WEBROOT/bin/magento maintenance:allow-ips $MYIP
php $WEBROOT/bin/magento maintenance:enable --ip=$MYIP
php $WEBROOT/bin/magento maintenance:status
php $WEBROOT/bin/magento maintenance:disable --ip=$MYIP
php $WEBROOT/bin/magento maintenance:status
- http://devdocs.magento.com/guides/v2.2/config-guide/cli/config-cli-subcommands-index.html
- http://devdocs.magento.com/guides/v2.2/config-guide/cli/config-cli-subcommands-config-mgmt-set.html
- http://devdocs.magento.com/guides/v2.2/config-guide/prod/config-reference-sens.html
- https://www.cloudways.com/blog/custom-cli-command-magento-2/