SamyKam - A set of pentesting tools to test Mag-Stripe readers and tokenization processes
Code and hardware integration by [Salvador Mendoza] (https://salmg.net)
PCB design and advisory by Team work with [electronicats] (https://twitter.com/electronicats)
Named the tool in honor of Samy Kamkar (http://samy.pl) For his hard work and community support
It is a MagSpoof but specfically designed for Raspberry Pi:
- OLED for prepared attacks
- Rotary endoder for navigation menu
Support: Mini-shell for basic commands implementing Bluetooth and Webserver independently
- change parameters without ssh
- send any shell command using Bluetooth
apt-get update
apt-get install python-dev python-setuptools swig python-bluez gcc-avr binutils-avr avr-libc
# gdata-2
curl -L https://pypi.python.org/packages/a8/70/bd554151443fe9e89d9a934a7891aaffc63b9cb5c7d608972919a002c03c/gdata-2.0.18.tar.gz#md5=13b6e6dd8f9e3e9a8e005e05a8329408 | tar xzf -
cd gdata-2.0.18
python setup.py install
# WiringPi
git clone git://git.drogon.net/wiringPi
cd wiringPi
./build
# WiringPi-Python
git clone --recursive https://github.com/ElectronicsCats/WiringPi-Python
cd WiringPi-Python
./build.sh
python setup.py install
# SPIDEV
git clone https://github.com/doceme/py-spidev
cd py-spidev
python setup.py install
# Adafruit_SSD1306
git clone https://github.com/adafruit/Adafruit_Python_SSD1306
cd Adafruit_Python_SSD1306
sudo python setup.py install
# py-gaugette
git clone https://github.com/guyc/py-gaugette
cd py-gaugette
sudo python setup.py install
#Flask
pip install flask
#SamyKamTools
git clone https://github.com/ElectronicsCats/SamyKamTools
cd SamyKamTools
sudo python SamyKam.py
curl https://raw.githubusercontent.com/ElectronicsCats/SamyKamTools/master/install.sh | sudo sh
The MagSpoofPi code is under Samy Kamkar license terms, for more information visit https://github.com/samyk/magspoof