DyNet
 | This article needs additional citations for verification. (March 2017) |
DyNet is the communications network and communications protocol for Dynalite lighting automation and building automation. It is now part of Philips Lighting.
Design
[edit]The network runs on a 4-twisted-pair cable of 100Ω 100 MHz CAT5E [permanent dead link] [1] or a flat cable with RS485 serial port, usually with a RJ-12 connector. A daisy-chain serial network topology is strongly recommended with no stubs. The recommended[1] cable colour-coding is:
Green/White pair = paralleled for GND
Orange/White pair = paralleled for 12V
Blue/White pair = blue for DATA and white for DATA-
Brown/White pair = spare or shield if unshielded cable is used.
References
[edit]
 | This article relating to communication is a stub. You can help Wikipedia by expanding it. |