Wikipedia

Niobium diselenide

Niobium diselenide or niobium(IV) selenide is a layered transition metal dichalcogenide with formula NbSe2. Niobium diselenide is a lubricant, and a superconductor at temperatures below 7.2 K that exhibit a charge density wave (CDW). NbSe2 crystallizes in several related forms, and can be mechanically exfoliated into monatomic layers, similar to other transition metal dichalcogenide monolayers. Monolayer NbSe2 exhibits very different properties from the bulk material, such as of Ising superconductivity, quantum metallic state, and strong enhancement of the CDW.[3]

Niobium diselenide

2H NbSe2 structure

Electron micrograph showing a local coexistence of different NbSe2 structures in one sample
Names
Other names
Niobium(IV) selenide
Identifiers
3D model (JSmol)
ChemSpider
ECHA InfoCard 100.031.634 Edit this at Wikidata
EC Number
  • 234-811-8
  • InChI=1S/Nb.2Se
    Key: CXRFFSKFQFGBOT-UHFFFAOYSA-N
  • [Se]=[Nb]=[Se]
Properties
NbSe2
Molar mass 250.83 g/mol[1]
Appearance Gray solid[1]
Density 6.3 g/cm3[1]
Melting point >1300 °C[1]
Structure
hP6, space group P6
3/mmc, No 194[2]
a = 0.344 nm, c = 1.254 nm
Trigonal prismatic (NbIV)
Pyramidal (Se2−)
Related compounds
Other anions
 Niobium dioxide
Other cations
 Molybdenum diselenide
Tungsten diselenide
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).

Synthesis

edit
 
Number of NbSe2 layers as a function of Se powder temperature during CVD.

Niobium diselenide crystals and thin films can be grown by chemical vapor deposition (CVD). Niobium oxide, selenium and NaCl powders are heated to different temperatures in the range 300–800 °C at ambient pressure in a furnace that allows maintaining a temperature gradient along its axis. Powders are placed in different locations in the furnace, and a mixture of argon and hydrogen is used as the carrier gas. The NbSe2 thickness can be accurately controlled by varying the temperature of selenium powder.[3]

NbSe2 monolayers can also be exfoliated from the bulk or deposited by molecular beam epitaxy.[3]

Structure

edit

Niobium diselenide exists in several forms, including 1H, 2H, 4H and 3R, where H stands for hexagonal and R for rhombohedral, and the number 1, 2, etc., refers to the number of Se-Nb-Se layers in a unit cell. The Se-Nb-Se layers are bonded together with relatively weak van der Waals forces, and can be exfoliated into 1H monolayers. They can be offset in a variety of ways to make different crystal structures, the most stable being 2H.[4]

Properties

edit

Superconductor

edit

NbSe2 is a superconductor with a critical temperature TC = 7.2 K.[5] The critical temperature drops when the NbSe2 layers are intercalated by other atoms, or when the sample thickness decreases, with TC being ~1 K in a monolayer.[3] Recent studies show infrared photodetection in NbSe2 devices.[6]

Charge density wave

edit

Along with the CDW the lattice develops a periodic lattice distortion around 26 K. This period is three times that of the crystal lattice, so that there is a 3 by 3 superlattice.[7] There is also a Cooper-pair density wave correlated but out of phase by 2π⁄3 with the charge-density wave.[8]

Friction

edit

NbSe2 sheets develop higher friction when very thin.[9]

Intercalation

edit

Because the layers in NbSe2 are only weakly bonded together, different substances can penetrate between the layers to form well defined intercalation compounds. Compounds with helium, rubidium, transition metals, and post-transition metals have been made. Extra niobium atoms, up to one third extra can be added between the layers.

Extra metal atoms from first transition metal series can intercalate up to 1:3 ratio. they go in between the layers.[4] An interesting stacking-selective self-intercalation phenomenon has been reported in Nb1 xSe2 films epitaxially grown using hybrid pulsed laser deposition (hPLD).[10] Presently, the highly intercalated 180°-stacked layers and sparsely intercalated 0°-stacked layers are interspersed on a nanometer length scale. This suggests a possibility of deterministically separating distinct phases to some extent on an appropriate length scale to realize regions of different electronic states.

Intercalating two atoms of helium per formula increases the layer separation to 2.9 and the Se-Se distance to 3.52.[11][12]

Rubidium

edit

When rubidium is intercalated, the NbSe2 layers separate to accommodate it. Each individual layer is also compressed slightly. The Nb-Se distance stays the same, but the Nb-Nb distance in the layer increases. The Se-Se distance on top and bottom of the layer decreases, and the Nb-Se-Nb angle increases. Extra electron density transfers from the Rb atoms to the niobium layer.[13]

Vanadium

edit

Vanadium can enter the 2H NbSe2 structure to the limit of 1% by substituting for Nb. Between 11% and 20% it forms a 4Hb structure with V in octahedral coordination between layers. Over 30% it forms a 1T structure.[14]

Fermi energy is shifted into the d band.[15]

Iron

edit

When doped with iron at levels greater than 8% NbSe2 can undergo a spin-glass transition at low temperatures.[16]

Hydrogen

edit

Hydrogen can be intercalated into NbSe2 under high pressure and high temperature. Up to 0.9 atoms of hydrogen per formula can be included while retaining the same structure. Over this ratio the structure changes to that of MoS2. At this transition the crystallographic c-axis increases and paramagnetic susceptibility drops to zero. Hydrogen content can go to 5.2 molar ratio at 50.5 atmospheres.[17]

Magnesium

edit

When magnesium is intercalated, the electron s-states do not overlap with the selenium, and it only has a small effect in reducing the superconducting critical temperature.[18]

Potential applications

edit

Bemol Incorporated manufactured niobium diselenide in the United States for use as a conducting lubricant in vacuum, as it has a wide temperature stability range, very low outgassing, and lower resistance than graphite. NbSe2 was used as motor brushes, or embedded in silver to make a self lubricating surface.[19]

References

edit
  1. ^ a b c d Haynes, William M., ed. (2011). CRC Handbook of Chemistry and Physics (92nd ed.). Boca Raton, Florida: CRC Press. p. 4.78. ISBN 1-4398-5511-0.
  2. ^ Rajora, O. S; Curzon, A. E (1987). "The preparation and X-ray diffraction study of the layer materials NbSxSe2−x for 0 ≦ x ≦ 2". Physica Status Solidi A. 99 (1): 65. Bibcode:1987PSSAR..99...65R. doi:10.1002/pssa.2210990108.
  3. ^ a b c d Wang, Hong; Huang, Xiangwei; Lin, Junhao; Cui, Jian; Chen, Yu; Zhu, Chao; Liu, Fucai; Zeng, Qingsheng; Zhou, Jiadong; Yu, Peng; Wang, Xuewen; He, Haiyong; Tsang, Siu Hon; Gao, Weibo; Suenaga, Kazu; Ma, Fengcai; Yang, Changli; Lu, Li; Yu, Ting; Teo, Edwin Hang Tong; Liu, Guangtong; Liu, Zheng (2017). "High-quality monolayer superconductor NbSe2 grown by chemical vapour deposition". Nature Communications. 8 (1): 394. Bibcode:2017NatCo...8..394W. doi:10.1038/s41467-017-00427-5. PMC 5577275. PMID 28855521.
  4. ^ a b Lévy, Francis (2012). Crystallography and Crystal Chemistry of Materials with Layered Structures. Springer Science & Business Media. pp. 9–12. ISBN 9789401014335.
  5. ^ NbSe2, a true 2-D superconductor. Physorg (November 6, 2015)
  6. ^ Orchin, G. J.; De Fazio, D.; Di Bernardo, A.; Hamer, M.; Yoon, D.; Cadore, A. R.; Goykhman, I.; Watanabe, K.; Taniguchi, T. (2019-06-24). "Niobium diselenide superconducting photodetectors". Applied Physics Letters. 114 (25): 251103. arXiv:1903.02528. Bibcode:2019ApPhL.114y1103O. doi:10.1063/1.5097389. ISSN 0003-6951. S2CID 119349265.
  7. ^ Riccó, B. (1977). "Fermi surface and charge density waves in niobium diselenide". Solid State Communications. 22 (5): 331–333. Bibcode:1977SSCom..22..331R. doi:10.1016/0038-1098(77)91442-9.
  8. ^ Liu, Xiaolong; Chong, Yi Xue; Sharma, Rahul; Davis, J. C. Séamus (2021-06-25). "Discovery of a Cooper-pair density wave state in a transition-metal dichalcogenide". Science. 372 (6549): 1447–1452. arXiv:2007.15228. doi:10.1126/science.abd4607. S2CID 220871205.
  9. ^ "Nanoscale Frictional Characteristics Revealed". Retrieved 25 March 2017.
  10. ^ Wang, Hongguang; Zhang, Jiawei; Shen, Chen; Yang, Chao; Küster, Kathrin; Deuschle, Julia; Starke, Ulrich; Zhang, Hongbin; Isobe, Masahiko; Huang, Dennis; van Aken, Peter A.; Takagi, Hidenori (2024). "Direct visualization of stacking-selective self-intercalation in epitaxial Nb1 xSe2 films". Nature Communications. 15 (1): 2541. doi:10.1038/s41467-024-46934-0. PMC 10957900. PMID 38514672.
  11. ^ Birks, A. R.; Hind, S. P.; Lee, P. M. (1976). "Band Structure Changes in Interealates of Niobium Diselenide". Physica Status Solidi B. 76 (2): 599–604. Bibcode:1976PSSBR..76..599B. doi:10.1002/pssb.2220760219.
  12. ^ Brown, Bruce E.; Beernsten, Donald J. (1965). "Layer structure polytypism among niobium and tantalum selenides" (PDF). Acta Crystallographica. 18: 31–38. doi:10.1107/S0365110X65000063.
  13. ^ Bourdillon, A J; Pettifer, R F; Marseglia, E A (1979). "EXAFS in niobium diselenide intercalated with rubidium". Journal of Physics C: Solid State Physics. 12 (19): 3889–3897. Bibcode:1979JPhC...12.3889B. doi:10.1088/0022-3719/12/19/007.
  14. ^ Bayard, Michel; Mentzen, Bernard F.; Sienko, M. J. (1976). "Synthesis and structural aspects of the vanadium-substituted niobium diselenides". Inorganic Chemistry. 15 (8): 1763–1767. doi:10.1021/ic50162a005.
  15. ^ Ibrahem, Mohammed Aziz; Huang, Wei-Chih; Lan, Tian-wey; Boopathi, Karunakara Moorthy; Hsiao, Yu-Chen; Chen, Chih-Han; Budiawan, Widhya; Chen, Yang-Yuan; Chang, Chia-Seng; Li, Lain-Jong; Tsai, Chih-Hung; Chu, Chih Wei (2014). "Controlled mechanical cleavage of bulk niobium diselenide to nanoscaled sheet, rod, and particle structures for Pt-free dye-sensitized solar cells". Journal of Materials Chemistry A. 2 (29): 11382. doi:10.1039/c4ta01881h.
  16. ^ Chen, M. C.; Slichter, C. P. (1 January 1983). "Zero-field NMR study on a spin-glass: Iron-doped—niobium diselenide". Physical Review B. 27 (1): 278–292. Bibcode:1983PhRvB..27..278C. doi:10.1103/PhysRevB.27.278. OSTI 5197013.
  17. ^ Kulikov, Leonid M.; Lazorenko, Vasilii I.; Lashkarev, Georgii V. (2002). "Magnetic Susceptibility of Powders of Hydrogen Intercalates of Niobium Diselenide". Powder Metallurgy and Metal Ceramics. 41 (1/2): 107–111. doi:10.1023/A:1016076918474. S2CID 91726908.
  18. ^ Naik, Subham; Kalaiarasan, Somesh; Nath, Ramesh C.; Sarangi, Sachindra N.; Sahu, Akshay K.; Samal, Debakanta; Biswal, Himansu S.; Samal, Saroj L. (10 March 2021). "Nominal Effect of Mg Intercalation on the Superconducting Properties of 2H–NbSe 2". Inorganic Chemistry. 60 (7): 4588–4598. doi:10.1021/acs.inorgchem.0c03545. PMID 33689330. S2CID 232197802.
  19. ^ Anglo Bell Company (October 1965). "Niobium diselenide lubricant". Vacuum. 15 (10): 511. doi:10.1016/0042-207X(65)90361-1.
 
Wikimedia Commons has media related to Niobium diselenide.
Retrieved from "https://en.wikipedia.org/w/index.php?title=Niobium_diselenide&oldid=1242504036"