Wikipedia

Mechanically stimulated gas emission

Mechanically stimulated gas emission (MSGE) is a complex phenomenon embracing various physical and chemical processes occurring on the surface and in the bulk of a solid under applied mechanical stress and resulting in emission of gases. MSGE is a part of a more general phenomenon of mechanically stimulated neutral emission.[1] MSGE experiments are often performed in ultra-high vacuum.

Phenomenology

edit

The specific characteristics of MSGE as compared with MSNE is that the emitted neutral particles are limited to gas molecules. MSGE is opposite to Mechanically Stimulated Gas Absorption that usually occurs under fretting corrosion of metals, exposure to gases at high pressures, etc.

There are three main sources of MSGE:[2][3][4][5]

I. Gas molecules adsorbed on the surface of a solid
IIa. Gases dissolved in the material bulk
IIb. Gases occluded or trapped in micro- and nanovoids, discontinuities and on defects in the material bulk
III. Gases generated as a result of mechanical activation of chemical reactions.[6][7]

Generally, for producing MSGE, the mechanical action on the solid can be of any type including tension, compression, torsion, shearing, rubbing, fretting, rolling, indentation, etc. In previous studies carried out by various groups it was found that MSGE is associated mainly with plastic deformation, fracture, wear and other irreversible modifications of a solid.[8][9] Under elastic deformation MSGE is almost negligible and only was observed just below elastic limit due to possible microplastic deformation.

In accordance to the main sources, the emitted gases usually contain hydrogen (source type IIa), argon (for coatings obtained using PVD in Ar plasma - source type IIb), methane (source type III), water (source type I and/or III), carbon mono- and dioxide (source type I/III).

The knowledge on the mechanisms of MSGE is still vague. On the basis of the experimental findings it was speculated that the following processes can be related with MSGE:

  1. Transport of gas atoms by moving dislocations
  2. Gas diffusion in the bulk driven by gradient of mechanical stress
  3. Phase transformation induced by deformation
  4. Removal of oxide and other surface layers, which prevent exit of dissolved atoms on the surface
  5. Extension of free surface

Thermal effect seems to be irrelevant to the gas emission under light load conditions.[10]

Terminology

edit

Emerging character of this interdisciplinary branch of science is reflected by a lack of established terminology. There are different terms and definitions used by different authors depending on the main approach used (chemical, physical, mechanical, vacuum science, etc.), specific gas emission mechanism (desorption, emanation, emission, etc.) and type of mechanical activation (friction, traction, etc.):

Mechanically stimulated outgassing (MSO) [11]
Tribodesorption
Triboemission,[12]
Fractoemission[13]
Atomic and Molecular emission[14]
Outgassing stimulated by friction[3]
Outgassing stimulated by deformation[4]

Desorption (tribodesorption, fractodesorption, etc.) refers to release of gases dissolved in the bulk and adsorbed on the surface. Therefore, desorption is only one of the contributing processes to MSGE. Outgassing is a technical term usually utilized in vacuum science. Thus, the term "gas emission" embraces various processes, reflects the physical nature of this complex phenomenon and is preferable for use in scientific publications.

Experimental observations

edit

Due to low emission rate experiments should be performed in ultrahigh vacuum (UHV). In some studies the materials were previously doped with tritium. MSGE rate then was measured by radioactivity outcome from the material under applied mechanical stress.[15]

See also

edit

References

edit
  1. ^ Dickinson, J.T.; Jensen, L.C.; Langford, S.C.; Hirth, J.P. (1991). "Atomic and molecular emission following fracture of alkali halides: A dislocation driven process". Journal of Materials Research. 6 (1). Cambridge University Press (CUP): 112–125. Bibcode:1991JMatR...6..112D. doi:10.1557/jmr.1991.0112. ISSN 0884-2914. S2CID 95342820.
  2. ^ Řepa, Petr (1992). "Mechanically induced desorption". Vacuum. 43 (5–7). Elsevier BV: 367–371. Bibcode:1992Vacuu..43..367R. doi:10.1016/0042-207x(92)90039-y. ISSN 0042-207X.
  3. ^ a b Řepa, Petr; Rott, Milan (1997). "Outgassing of metals stimulated by friction". Vacuum. 48 (7–9). Elsevier BV: 775–778. Bibcode:1997Vacuu..48..775R. doi:10.1016/s0042-207x(97)00043-2. ISSN 0042-207X.
  4. ^ a b Řepa, Petr; Orálek, David (1999). "Outgassing stimulated by deformation". Vacuum. 53 (1–2). Elsevier BV: 299–302. Bibcode:1999Vacuu..53..299R. doi:10.1016/s0042-207x(98)00367-4. ISSN 0042-207X.
  5. ^ Nevshupa, R. A.; Roman, E.; de Segovia, J. L. (2008). "Origin of hydrogen desorption during friction of stainless steel by alumina in ultrahigh vacuum". Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films. 26 (5). American Vacuum Society: 1218–1223. Bibcode:2008JVSTA..26.1218N. doi:10.1116/1.2968682. ISSN 0734-2101.
  6. ^ Urakaev, Farit Khisamutdinovich (2007-04-12). "Mechanodestruction of minerals at the crack tip (Overview): 1. Experiment". Physics and Chemistry of Minerals. 34 (5). Springer Science and Business Media LLC: 351–361. Bibcode:2007PCM....34..351U. doi:10.1007/s00269-007-0153-y. ISSN 0342-1791. S2CID 93921336.
  7. ^ Mori, Shigeyuki; Shitara, Yuji (1994). "Tribochemical activation of gold surface by scratching". Applied Surface Science. 78 (3). Elsevier BV: 269–273. Bibcode:1994ApSS...78..269M. doi:10.1016/0169-4332(94)90014-0. ISSN 0169-4332.
  8. ^ Frisch, Bertram; Thiele, Wolf-rüdiger (1984). "The tribologically induced effect of hydrogen effusion and penetration in steels". Wear. 95 (2). Elsevier BV: 213–227. doi:10.1016/0043-1648(84)90119-4. ISSN 0043-1648.
  9. ^ Louthan, M.R; Caskey, G.R; Donovan, J.A; Rawl, D.E (1972). "Hydrogen embrittlement of metals". Materials Science and Engineering. 10. Elsevier BV: 357–368. doi:10.1016/0025-5416(72)90109-7. ISSN 0025-5416.
  10. ^ Nevshupa, Roman; Roman, Elisa; Segovia, Jose Luis De (2010). "Model of the effect of local frictional heating on the tribodesorbed gases from metals in ultra-high vacuum". International Journal of Materials and Product Technology. 38 (1). Inderscience Publishers: 57-65. doi:10.1504/ijmpt.2010.031895. ISSN 0268-1900.
  11. ^ Peressadko, A.G.; Nevshupa, R.A.; Deulin, E.A. (2002). "Mechanically stimulated outgassing from ball bearings in vacuum". Vacuum. 64 (3–4). Elsevier BV: 451–456. Bibcode:2002Vacuu..64..451P. doi:10.1016/s0042-207x(01)00335-9. hdl:10261/346552. ISSN 0042-207X.
  12. ^ Nevshupa R. A. Triboemission: an attempt of developing a generalized classification», in “Tribology: science and applications”. Vienna: PAS, 2003. P. 11-25
  13. ^ Dickinson, J. T.; Langford, S. C.; Jensen, L. C.; McVay, G. L.; Kelso, J. F.; Pantano, C. G. (1988). "Fractoemission from fused silica and sodium silicate glasses". Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films. 6 (3). American Vacuum Society: 1084–1089. Bibcode:1988JVSTA...6.1084D. doi:10.1116/1.575646. ISSN 0734-2101.
  14. ^ Dickinson, J. T.; Jensen, L. C.; Langford, S. C. (1991-04-22). "Atomic and molecular emission accompanying fracture of single-crystal Ge: A dislocation-driven process". Physical Review Letters. 66 (16). American Physical Society (APS): 2120–2123. Bibcode:1991PhRvL..66.2120D. doi:10.1103/physrevlett.66.2120. ISSN 0031-9007. PMID 10043396.
  15. ^ Louthan, M.R.; Derrick, R.G. (1975). "Hydrogen transport in austenitic stainless steel". Corrosion Science. 15 (6–12). Elsevier BV: 565–577. Bibcode:1975Corro..15..565L. doi:10.1016/0010-938x(75)90022-0. ISSN 0010-938X.
Retrieved from "https://en.wikipedia.org/w/index.php?title=Mechanically_stimulated_gas_emission&oldid=1219008136"