In mathematics, the mean value theorem (or Lagrange's mean value theorem) states, roughly, that for a given planar arc between two endpoints, there is at least one point at which the tangent to the arc is parallel to the secant through its endpoints. It is one of the most important results in real analysis. This theorem is used to prove statements about a function on an interval starting from local hypotheses about derivatives at points of the interval.

History

edit

A special case of this theorem for inverse interpolation of the sine was first described by Parameshvara (1380–1460), from the Kerala School of Astronomy and Mathematics in India, in his commentaries on Govindasvāmi and Bhāskara II.[1] A restricted form of the theorem was proved by Michel Rolle in 1691; the result was what is now known as Rolle's theorem, and was proved only for polynomials, without the techniques of calculus. The mean value theorem in its modern form was stated and proved by Augustin Louis Cauchy in 1823.[2] Many variations of this theorem have been proved since then.[3][4]

Statement

edit
 
The function   attains the slope of the secant between   and   as the derivative at the point  .
 
It is also possible that there are multiple tangents parallel to the secant.

Let   be a continuous function on the closed interval  , and differentiable on the open interval  , where  . Then there exists some   in   such that:[5]

 

The mean value theorem is a generalization of Rolle's theorem, which assumes  , so that the right-hand side above is zero.

The mean value theorem is still valid in a slightly more general setting. One only needs to assume that   is continuous on  , and that for every   in   the limit

 

exists as a finite number or equals   or  . If finite, that limit equals  . An example where this version of the theorem applies is given by the real-valued cube root function mapping  , whose derivative tends to infinity at the origin.

Proof

edit

The expression   gives the slope of the line joining the points   and  , which is a chord of the graph of  , while   gives the slope of the tangent to the curve at the point  . Thus the mean value theorem says that given any chord of a smooth curve, we can find a point on the curve lying between the end-points of the chord such that the tangent of the curve at that point is parallel to the chord. The following proof illustrates this idea.

Define  , where   is a constant. Since   is continuous on   and differentiable on  , the same is true for  . We now want to choose   so that   satisfies the conditions of Rolle's theorem. Namely

 

By Rolle's theorem, since   is differentiable and  , there is some   in   for which   , and it follows from the equality   that,

 

Implications

edit

Theorem 1: Assume that   is a continuous, real-valued function, defined on an arbitrary interval   of the real line. If the derivative of   at every interior point of the interval   exists and is zero, then   is constant in the interior.

Proof: Assume the derivative of   at every interior point of the interval   exists and is zero. Let   be an arbitrary open interval in  . By the mean value theorem, there exists a point   in   such that

 

This implies that  . Thus,   is constant on the interior of   and thus is constant on   by continuity. (See below for a multivariable version of this result.)

Remarks:

  • Only continuity of  , not differentiability, is needed at the endpoints of the interval  . No hypothesis of continuity needs to be stated if   is an open interval, since the existence of a derivative at a point implies the continuity at this point. (See the section continuity and differentiability of the article derivative.)
  • The differentiability of   can be relaxed to one-sided differentiability, a proof is given in the article on semi-differentiability.

Theorem 2: If   for all   in an interval   of the domain of these functions, then   is constant, i.e.   where   is a constant on  .

Proof: Let  , then   on the interval  , so the above theorem 1 tells that   is a constant   or  .

Theorem 3: If   is an antiderivative of   on an interval  , then the most general antiderivative of   on   is   where   is a constant.

Proof: It directly follows from the theorem 2 above.

Cauchy's mean value theorem

edit

Cauchy's mean value theorem, also known as the extended mean value theorem, is a generalization of the mean value theorem.[6][7] It states: if the functions   and   are both continuous on the closed interval   and differentiable on the open interval  , then there exists some  , such that

 
Geometrical meaning of Cauchy's theorem
 

Of course, if   and  , this is equivalent to:

 

Geometrically, this means that there is some tangent to the graph of the curve[8]

 

which is parallel to the line defined by the points   and  . However, Cauchy's theorem does not claim the existence of such a tangent in all cases where   and   are distinct points, since it might be satisfied only for some value   with  , in other words a value for which the mentioned curve is stationary; in such points no tangent to the curve is likely to be defined at all. An example of this situation is the curve given by

 

which on the interval   goes from the point   to  , yet never has a horizontal tangent; however it has a stationary point (in fact a cusp) at  .

Cauchy's mean value theorem can be used to prove L'Hôpital's rule. The mean value theorem is the special case of Cauchy's mean value theorem when  .

Proof

edit

The proof of Cauchy's mean value theorem is based on the same idea as the proof of the mean value theorem.

  • Suppose  . Define  , where   is fixed in such a way that  , namely
     
    Since   and   are continuous on   and differentiable on  , the same is true for  . All in all,   satisfies the conditions of Rolle's theorem: consequently, there is some   in   for which  . Now using the definition of   we have:
     
    and thus
     
  • If  , then, applying Rolle's theorem to  , it follows that there exists   in   for which  . Using this choice of  , Cauchy's mean value theorem (trivially) holds.

Mean value theorem in several variables

edit

The mean value theorem generalizes to real functions of multiple variables. The trick is to use parametrization to create a real function of one variable, and then apply the one-variable theorem.

Let   be an open subset of  , and let   be a differentiable function. Fix points   such that the line segment between   lies in  , and define  . Since   is a differentiable function in one variable, the mean value theorem gives:

 

for some   between 0 and 1. But since   and  , computing   explicitly we have:

 

where   denotes a gradient and   a dot product. This is an exact analog of the theorem in one variable (in the case   this is the theorem in one variable). By the Cauchy–Schwarz inequality, the equation gives the estimate:

 

In particular, when   is convex and the partial derivatives of   are bounded,   is Lipschitz continuous (and therefore uniformly continuous).

As an application of the above, we prove that   is constant if the open subset   is connected and every partial derivative of   is 0. Pick some point  , and let  . We want to show   for every  . For that, let  . Then   is closed in   and nonempty. It is open too: for every   ,

 

for every   in open ball centered at   and contained in  . Since   is connected, we conclude  .

The above arguments are made in a coordinate-free manner; hence, they generalize to the case when   is a subset of a Banach space.

Mean value theorem for vector-valued functions

edit

There is no exact analog of the mean value theorem for vector-valued functions (see below). However, there is an inequality which can be applied to many of the same situations to which the mean value theorem is applicable in the one dimensional case:[9]

Theorem — For a continuous vector-valued function   differentiable on  , there exists a number   such that

 .
Proof

Take  . Then   is real-valued and thus, by the mean value theorem,

 

for some  . Now,   and   Hence, using the Cauchy–Schwarz inequality, from the above equation, we get:

 

If  , the theorem holds trivially. Otherwise, dividing both sides by   yields the theorem.

Mean value inequality

edit

Jean Dieudonné in his classic treatise Foundations of Modern Analysis discards the mean value theorem and replaces it by mean inequality as the proof is not constructive and one cannot find the mean value and in applications one only needs mean inequality. Serge Lang in Analysis I uses the mean value theorem, in integral form, as an instant reflex but this use requires the continuity of the derivative. If one uses the Henstock–Kurzweil integral one can have the mean value theorem in integral form without the additional assumption that derivative should be continuous as every derivative is Henstock–Kurzweil integrable.

The reason why there is no analog of mean value equality is the following: If f : URm is a differentiable function (where URn is open) and if x th, x, hRn, t ∈ [0, 1] is the line segment in question (lying inside U), then one can apply the above parametrization procedure to each of the component functions fi (i = 1, …, m) of f (in the above notation set y = x h). In doing so one finds points x tih on the line segment satisfying

 

But generally there will not be a single point x t*h on the line segment satisfying

 

for all i simultaneously. For example, define:

 

Then  , but   and   are never simultaneously zero as   ranges over  .

The above theorem implies the following:

Mean value inequality[10] — For a continuous function  , if   is differentiable on  , then

 .

In fact, the above statement suffices for many applications and can be proved directly as follows. (We shall write   for   for readability.)

Proof

First assume   is differentiable at   too. If   is unbounded on  , there is nothing to prove. Thus, assume  . Let   be some real number. Let   We want to show  . By continuity of  , the set   is closed. It is also nonempty as   is in it. Hence, the set   has the largest element  . If  , then   and we are done. Thus suppose otherwise. For  ,

 

Let   be such that  . By the differentiability of   at   (note   may be 0), if   is sufficiently close to  , the first term is  . The second term is  . The third term is  . Hence, summing the estimates up, we get:  , a contradiction to the maximality of  . Hence,   and that means:

 

Since   is arbitrary, this then implies the assertion. Finally, if   is not differentiable at  , let   and apply the first case to   restricted on  , giving us:

 

since  . Letting   finishes the proof.

Cases where the theorem cannot be applied

edit

All conditions for the mean value theorem are necessary:

  1.   is differentiable on  
  2.   is continuous on  
  3.   is real-valued

When one of the above conditions is not satisfied, the mean value theorem is not valid in general, and so it cannot be applied.

 

The necessity of the first condition can be seen by the counterexample where the function   on [-1,1] is not differentiable.

The necessity of the second condition can be seen by the counterexample where the function   satisfies criteria 1 since   on   but not criteria 2 since   and   for all   so no such   exists.

The theorem is false if a differentiable function is complex-valued instead of real-valued. For example, if   for all real  , then   while   for any real  .

Mean value theorems for definite integrals

edit

First mean value theorem for definite integrals

edit
 
Geometrically: interpreting f(c) as the height of a rectangle and ba as the width, this rectangle has the same area as the region below the curve from a to b[11]

Let f : [a, b] → R be a continuous function. Then there exists c in (a, b) such that

 

This follows at once from the fundamental theorem of calculus, together with the mean value theorem for derivatives. Since the mean value of f on [a, b] is defined as

 

we can interpret the conclusion as f achieves its mean value at some c in (a, b).[12]

In general, if f : [a, b] → R is continuous and g is an integrable function that does not change sign on [a, b], then there exists c in (a, b) such that

 

Second mean value theorem for definite integrals

edit

There are various slightly different theorems called the second mean value theorem for definite integrals. A commonly found version is as follows:

If   is a positive monotonically decreasing function and   is an integrable function, then there exists a number x in (a, b] such that
 

Here   stands for  , the existence of which follows from the conditions. Note that it is essential that the interval (a, b] contains b. A variant not having this requirement is:[13]

If   is a monotonic (not necessarily decreasing and positive) function and   is an integrable function, then there exists a number x in (a, b) such that
 

If the function   returns a multi-dimensional vector, then the MVT for integration is not true, even if the domain of   is also multi-dimensional.

For example, consider the following 2-dimensional function defined on an  -dimensional cube:

 

Then, by symmetry it is easy to see that the mean value of   over its domain is (0,0):

 

However, there is no point in which  , because   everywhere.

Generalizations

edit

Linear algebra

edit

Assume that   and   are differentiable functions on   that are continuous on  . Define

 

There exists   such that  .

Notice that

 

and if we place  , we get Cauchy's mean value theorem. If we place   and   we get Lagrange's mean value theorem.

The proof of the generalization is quite simple: each of   and   are determinants with two identical rows, hence  . The Rolle's theorem implies that there exists   such that  .

Probability theory

edit

Let X and Y be non-negative random variables such that E[X] < E[Y] < ∞ and   (i.e. X is smaller than Y in the usual stochastic order). Then there exists an absolutely continuous non-negative random variable Z having probability density function

 

Let g be a measurable and differentiable function such that E[g(X)], E[g(Y)] < ∞, and let its derivative g′ be measurable and Riemann-integrable on the interval [x, y] for all yx ≥ 0. Then, E[g′(Z)] is finite and[14]

 

Complex analysis

edit

As noted above, the theorem does not hold for differentiable complex-valued functions. Instead, a generalization of the theorem is stated such:[15]

Let f : Ω → C be a holomorphic function on the open convex set Ω, and let a and b be distinct points in Ω. Then there exist points u, v on the interior of the line segment from a to b such that

 
 

Where Re() is the real part and Im() is the imaginary part of a complex-valued function.

See also

edit

Notes

edit
  1. ^ J. J. O'Connor and E. F. Robertson (2000). Paramesvara, MacTutor History of Mathematics archive.
  2. ^ Ádám Besenyei. "Historical development of the mean value theorem" (PDF).
  3. ^ Lozada-Cruz, German (2020-10-02). "Some variants of Cauchy's mean value theorem". International Journal of Mathematical Education in Science and Technology. 51 (7): 1155–1163. Bibcode:2020IJMES..51.1155L. doi:10.1080/0020739X.2019.1703150. ISSN 0020-739X. S2CID 213335491.
  4. ^ Sahoo, Prasanna. (1998). Mean value theorems and functional equations. Riedel, T. (Thomas), 1962-. Singapore: World Scientific. ISBN 981-02-3544-5. OCLC 40951137.
  5. ^ Rudin 1976, p. 108.
  6. ^ W., Weisstein, Eric. "Extended Mean-Value Theorem". mathworld.wolfram.com. Retrieved 2018-10-08.{{cite web}}: CS1 maint: multiple names: authors list (link)
  7. ^ Rudin 1976, pp. 107–108.
  8. ^ "Cauchy's Mean Value Theorem". Math24. Retrieved 2018-10-08.
  9. ^ Rudin 1976, p. 113.
  10. ^ Hörmander 2015, Theorem 1.1.1. and remark following it.
  11. ^ "Mathwords: Mean Value Theorem for Integrals". www.mathwords.com.
  12. ^ Michael Comenetz (2002). Calculus: The Elements. World Scientific. p. 159. ISBN 978-981-02-4904-5.
  13. ^ Hobson, E. W. (1909). "On the Second Mean-Value Theorem of the Integral Calculus". Proc. London Math. Soc. S2–7 (1): 14–23. Bibcode:1909PLMS...27...14H. doi:10.1112/plms/s2-7.1.14. MR 1575669.
  14. ^ Di Crescenzo, A. (1999). "A Probabilistic Analogue of the Mean Value Theorem and Its Applications to Reliability Theory". J. Appl. Probab. 36 (3): 706–719. doi:10.1239/jap/1032374628. JSTOR 3215435. S2CID 250351233.
  15. ^ 1 J.-Cl. Evard, F. Jafari, A Complex Rolle’s Theorem, American Mathematical Monthly, Vol. 99, Issue 9, (Nov. 1992), pp. 858-861.

References

edit
  • Rudin, Walter (1976). Principles of Mathematical Analysis. Auckland: McGraw-Hill Publishing Company. ISBN 978-0-07-085613-4.
  • Hörmander, Lars (2015), The Analysis of Linear Partial Differential Operators I: Distribution Theory and Fourier Analysis, Classics in Mathematics (2nd ed.), Springer, ISBN 9783642614972
edit